Višini Nastavljiv Formatne Žage nakup rabljenega (6.600)

Stanje: kot nova (razstavni stroj), 3,000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.6 rpm Dsdpodvn E Uefx Aflsul Table diameter: 1,200 mm Tilting angle: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with vertical table, up to center: 960 mm ~ 1,910 mm Dimensions with horizontal table: 1,200 mm to 1,900 mm

Stanje: rabljeno, Jaw width: 125 mm Dsdpfx Aev Hcyzsfloul Opening width: 150 mm The vise does not have a pipe clamp.

Stanje: dober (rabljeno), Bench vice, engineer's vice, parallel vice - Jaw width: 135 mm - Clamping width: 215 mm - Quantity: 3 vices available - Price: per piece - Dimensions: 440/200/H490 mm Djdpfxevmg Ddo Afleul - Weight: 26 kg

Leto izdelave: 2018, Stanje: skoraj kot novo (rabljeno), Dumeta hydraulic height-adjustable welding positioner 500 kg load capacity, height-adjustable welding positioner with through-hole 100 - 200 mm Table diameter: 700 mm Dusdpfehua Dqox Afljl Horizontal height: min. 0.6 m, max. 1.2 m Tilted height: min. 0.40 m, max. 1.0 m Rotation speed: 0.11 - 1.25 rpm Weight: 750 kg Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction

Leto izdelave: 2004, Stanje: rabljeno, Conveyor belt, belt conveyor, transport belt, belt band conveyor, belt conveyor, flat belt conveyor - Manufacturer: Interroll, belt conveyor type 4081 with pneumatic height adjustment - Lift height: 500 mm - Speed: 8 m/min - Belt width: 1215 mm - Conveyor length: 815 mm, see photo of technical drawing for dimensions Duodpfx Afoqgi Iaoljl - Drive: SEW-Eurodrive 0.37 kW, see photo of nameplate - Transport dimensions: 1460/1040/H1360 mm - Weight: 223 kg with pallet

Stanje: novo, 2000 kg load capacity welding positioner, height-adjustable Very robust design Continuously variable speed control from 0.05 to 0.7 rpm Duedpfx Afsdvn E Eolsl Rotary table diameter: 1200 mm Tilting angle up to 120° Total height adjustment: 600 mm Height adjustment range: 1450 mm to 2050 mm Minimum height (horizontal): 1350 mm, tilted (to center): 1200 mm Maximum height (horizontal): 1850 mm, tilted (to center): 1700 mm Hand and foot remote control

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Stroj za postavljanje zobov za okvirne žage. Leta 2009 obnovljen z novo Phytron krmilno enoto. Elektronski precizni avtomat za postavljanje zobov. Popolno z vpenjalno napravo za okvirne žage. Dusdpfx Afex E Sk Seljl

Stanje: zelo dobro (rabljeno), Valjčna steza, transportna steza, valjčni transporter, valjčna proga, prosto tekaška valjčna steza, valjčna miza -Proizvajalec: Soco, prosto tekaška valjčna steza s plastičnimi valji, na masivnem podnožju, nastavljiva po višini -Dolžina: 1500 mm Dodoxu Ugropfx Afloul -Širina valjev: 400 mm -Premer valjev: 57 mm -Razmak med valji: 60 mm -Višina: 515 do 750 mm -Transportne dimenzije: 1505/510/V215 mm -Teža: 30 kg

Stanje: rabljeno, Offer 22187 Technical Data: - Height-adjustable roller conveyor with spring assistance and locking mechanism - With clamping lever - Roller conveyor length approx. 3,000 mm - Min. conveyor height approx. 600 mm - Max. conveyor height approx. 1,100 mm - Roller width (outside) approx. 280 mm - Each roller length 2 x 125 mm Duedpswclhxjfx Aflsl - Roller diameter approx. up to max. 100 mm - Maximum possible number of rollers 10 pcs - 7 pairs of rollers installed - Total conveyor width approx. 500 mm - Total length approx. 3,200 mm - Weight approx. 250 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Minimalna višina: 680 mm Maksimalna višina: 1.050 mm Širina: 730 – 1.020 mm Duedpfsw Uirdox Afljl Posebnosti: nastavljiva višina, nastavljiva širina Stanje: Rabljeno / popolnoma funkcionalno Funkcijski test: OK

Leto izdelave: 2024, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, največja dovoljena obremenitev: 1.200 kg, premer čelne plošče: 650 mm, vrsta nastavitve višine: hidravlični, varilni tok pri 100% delovnem ciklu: 300 A, The rotary tilt table is also available for rental (including trial rental). Maximum load: 1.2 t Rotational speed: steplessly adjustable approx. 0.07 – 1.6 rpm Table diameter: 650 mm with T-slots Table height (horizontal): 711 – 1,060 mm Dodpfx Aorkmngjfleul Hydraulically height-adjustable for more ergonomic operation Control: wired hand pendant and foot switch Subject to prior sale or rental.

Leto izdelave: 2022, Stanje: novo, • Load capacity rotary stand: 1,000 kg • Machine body: Sheet metal construction made from quality steel • Length/Width: 1,000 mm x 1,180 mm Dusdpfx Aefxw Dcjfljl • Height: 2,220 mm • Faceplate lift (vertical): 700–1,400 mm • Faceplate diameter: 600 mm • Chuck: M-WPS500 • Machine weight (DSH): 1,400 kg • Faceplate rotation speed: 0.1–2 rpm Operation At the control cabinet: Selector switch—rotation by foot pedal or push button at the control cabinet Rotation: LEFT/RIGHT Lifting: UP/DOWN Potentiometer for stepless speed control Foot switch: Rotation LEFT/RIGHT Welding current transmission: 600 A

Stanje: novo, Hydraulic CNC automatic bandsaw for cuts from 0° to 60° to the right, compliant with all CE safety regulations. The machine features 9 programs, each consisting of 99 steps, for a total of approximately 890 cutting positions with a corresponding piece counter. Operation: Material feed advance. Fixed vise closure. Blade rotation and delivery of emulsifiable coolant, descent of the saw bow until cut completion, and return of the feed carriage to the preset dimension. Return of saw bow, stopping of blade rotation and coolant delivery. Opening of fixed vise. Cycle repetition. Duedpfx Afsg Np Dxolol Step-by-step feed with ball screw drive. Numerical control of quantity and cutting length. Hydraulic unit with adjustable cutting pressure. Blade tensioning through manual handwheel rotation and secured by an electromechanical device. Blade-cleaning brush device. Bimetallic blade 3010 x 27 x 0.9 mm. Hydraulic unit motor 0.75 kW. Cutting thickness 1.2 mm. Material feed stroke 600 mm. Electropump 0.09 kW.

Stanje: rabljeno, Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, Model: BAS 100. Stroj za varjenje tračnih žag z utripnim varjenjem. Hidravlično vpenjanje. Časovnik za popuščanje. Dodjw Snpiopfx Afloul Naprava za pozicioniranje žaginega lista. Leto izdelave: 1997. Samodejni nadzor temperature popuščanja. Varjenje lesenih trakov do 100 mm. Bimetalni trak do 80 mm. Priklop: 3 x 220 V. (možen tudi 3 x 400V na zahtevo) Teža: 500 kg. Dimenzije (Š*G*V): 1400*900*1500 mm. Navodila in embalaža vključena.

Stanje: novo, Leto izdelave: 2025, New optimization saw SALVACUT 5000 from SALVAMAC Innovative high-speed optimizing saw with optimization and removal of wood defects, featuring dual drive with upper rollers and a lower feed belt with independent control. Djdpfon E Sl Rjx Afleul Based on an idea by Salvador Christian.

Stanje: kot nova (razstavni stroj), Blokovska tračna žaga Hauslhof CTR800Hydraulik, demonstracijski stroj, Premer hloda do 830 mm, Skupna dolžina 5800 mm, širina 2300 mm, s hidravličnim sistemom za napenjanje, vpenjanje, obračanje in dvigovanje hloda Skupna izhodna moč motorja pri 100% ED: 10 kW Opcije: CTR800H-Ver3 CTR800H-KSD CTR800H-STH CTR800H-STH-V CTR-SSP CTR-11 CTR-VOR CTR-AMP CTR-EGL CTR-LG Automat CTR-Pumpe-EA Dusdpfx Asvrvrnoflel

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Dedpfxow Sy T He Afljul Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Stanje: rabljeno, Leto izdelave: 1959, Funkcionalnost: popolnoma funkcionalen, Brusilni stroj za ostrenje tračnih žag. Ogled je možen. Dujdpex Tak Nofx Aflel

Stanje: zelo dobro (rabljeno), HSS saw beveling machine PERUZZI model SAUT 550, completely overhauled and newly painted, like new Djdpfxohzcctj Afloul

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Tip: BAS Maksimalna širina varjenja do 50 mm. Varilni stroj za čelno varjenje. Ročno vpenjanje. Širina rezila do 50 mm. Rabljeni stroj v delujočem stanju. Stroj je prebarvan. Varjenje tračnih žag za les do 50 mm. Varjenje tračnih žag za kovino do 34 mm. Dobava iz zaloge. Priklop: 220 V. Teža: ca. 180 kg. Pakiranje vključeno. Duedpfow Snu Sjx Aflel

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Avtomatski brusilni stroj za gaterske žage z napravo za mokro brušenje. Hitrost brusilnega koluta je krmiljena s frekvenčnim pretvornikom. Razmak zob 25 mm. Oblika zoba PZ / lokasti zob. Hitrost podajanja je brezstopenjsko nastavljiva do 60 zob/min. Širina lista 60–160 mm. Avtomatski pomik brusilnega koluta. Predizbira števila brusenj. Naprava za mokro brušenje s črpalko in rezervoarjem. Djdpfxex A D Eao Afljul

Stanje: novo, Leto izdelave: 2025, Cutting range round: 20 – 100 mm Cutting range square (W x H): 20 x 70 mm Shortest length of cut-off piece: 5 mm Shortest remnant length in automatic operation*: 65 mm Shortest remnant length in single cut: 30 mm Length: 2,300 mm Width incl. chip conveyor: 2,260 mm Height: 2,100 mm Material support height: 925 mm Approximate machine weight: 3,950 kg Total connected load: 26 kW Saw motor power: 18.5 kW Hydraulic motor power: 2.2 kW Infinitely variable cutting speed: 30–160 rpm Saw feed rate: 0.3–30 mm/s Automatic material feed length, single stroke: 800 mm Automatic material feed length, multiple strokes: 9,999 mm Dodswaa Dvepfx Afleul Saw blade diameter: 360 mm Saw blade bore: 40 mm Saw blade thickness: 2.25 mm Standard equipment Fully enclosed CE-compliant safety cover, 45° servo feed, CE electrical safety, main drive permanent magnet motor, HMI + push buttons, inverter, mist spray system (2L), dust collection unit, cutting tube jet device, air conditioning unit for the cabin, LED work light, automatic chip conveyor (spiral), vise pressure regulator, motorized chip brush, top clamp, hydraulic cooling fan, automatic lubrication system, simple roller table, saw chip collection cart 70 (L), toolbox (wire brush, leveling pads, touch-up paint), circular saw blade Optional equipment optional: JLH-EHA, Saw Master, UL electrical safety, third vise Automation 1.5 m discharge material table, 2 m servo discharge material table, 5.5 m inclined powered magazine (rectangular material), 5.5 m angled powered magazine (round material), 5.5 m magazine with belt feed (round material)

Stanje: zelo dobro (rabljeno), Pralna naprava za žage in orodja Rotatherm Dujdpfx Ajxw H Tvjfljl

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Model: BAS 051. Avtomatski stroj za zvarjanje tračnih žag z odgorevanjem. Pnevmatska pritrditev. Žarilni pirometer. Vodilo za vstavljanje za pozicioniranje lista. Dodpfxoxcnzre Afljul UniOp avtomatska regulacija žarilne temperature. Stroj očiščen in na novo prebarvan. Leto izdelave: 2001. Nazivna napetost: 380 V AC. Največja varilna moč: 8 kVA. Vpenjalna sila: 20 kN. Kovaška sila: 5 kN. Območja varjenja. Tračni žagini listi za les: 6–50 mm. Bimetalni tračni žagini listi: 6–41 mm. Tračni noži: 6–50 mm. Tračni žagini listi iz nerjavnega jekla: 6–30 mm. Teža: 600 kg. Mere (Š x D x V): 1350 x 1000 x 1700 mm. Navodila in embalaža vključeni.

Stanje: novo, Leto izdelave: 2025, Cutting range, square (W x H): 2600 x 100 mm Shortest length of cut-off piece: 1100 x 20 mm Shortest remnant length in automatic mode*: 400 mm Shortest remnant length in single cut: 40 mm Total connected load: 41 kW Saw motor power: 30 kW Hydraulic motor power: 7.5 kW Cutting speed, steplessly adjustable: 20–100 rpm Saw feed rate: 1–700 mm/min Material support height: 720 mm Saw blade diameter: 425 mm Saw blade bore: 50 mm Saw blade thickness: 2.7 mm Length: 12,000 mm Width incl. chip conveyor: 6,300 mm Height: 3,000 mm Machine weight approx.: 28,000 kg Standard Equipment Variable blade speed controlled by frequency inverter Precision feed pressure and feed speed via double valve system Servo feed motor with precision ball screw spindle Duedpfx Asxlcaujflel Combined guides with bearings Oil mist cooling system Blade anti-vibration device PLC control for all electric and hydraulic functions Hydraulic pump with three-phase motor Two sets of horizontal and vertical clamping devices Adjustable base plate Roller table Optional Equipment Optional: JLH-EHASaw MasterUL Electrical SafetyThird vice Automation