Demag Ac 40 City nakup rabljenega (519)

Stanje: dober (rabljeno), Trenjsko kolo, pogonsko kolo za mostno dvigalo, mostno dvigalo, halno dvigalo, montažno dvigalo, delovno mesto dvigalo, kolesni blok, sistem kolesnih blokov -Proizvajalec: Demag, kolesni blok za pogonski mehanizem dvigala -Tip: žal ni točne tip oznake -Premer pogonskega kolesa: 125 mm Lasdew Uxt Repfx Al Noa -Pogonsko kolo: širina tira med merami 48 mm -Prevzem: Ø 30 mm, mere glej slike -Količina: na voljo 2 kosa -Cena: na kos -Dimenzije: 220/97/V160 mm -Teža: 8,5 kg/kos

Leto izdelave: 2019, obratovalne ure: 17.716 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Širina: 1920 cm Globina: 7750 cm Teža stroja: 26.210 kg Višina: 2410 mm Ta električni stroj za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920 je bil izdelan leta 2019. Robusten električni stroj za brizganje s premerom polža 40 mm in zapiralno silo 3.500 kN. Deloval je 17.716 ur in izvedel 12.440.761 ciklov, kar omogoča obsežne proizvodne zmogljivosti. Razmislite o nakupu električnega stroja za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920. Za več informacij nas kontaktirajte. Vrsta uporabe Brizganje plastike Lsdpsx D Nx Isfx Al Nsaa

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 96.986 h, vpenjalna sila: 600 kN, premer vijaka: 30 mm, This hydraulic injection moulding machine, model DEMAG ET60-200 concept, was manufactured in 2003. It features a clamping force of 600 kN and a maximum mould weight of 580 kg. The machine is equipped with a robust injection unit featuring a screw diameter of 30 mm and an injection pressure of 1900 bar. Take advantage of this opportunity to purchase the DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further information. Ledpfjyg Nfuex Al Njaa • Clamping unit: • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mould installation height: 210 mm • Opening stroke: 400 mm • Max. mould weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on ejector side/ES) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Shot volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Armoured/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 tonnes Additional equipment • Robot / parts removal device: W621-1381 • Strokes: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: integrated 7-zone control • Tool sensors: Kistler (p=1/t=0)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 27.551 h, vpenjalna sila: 2.200 kN, skupna višina: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Additional Equipment • Sepro robot SDR 22 Machine Advantages Technical Machine Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max. shot volume: 329 cm³ / max. shot weight: 293 g / injection rate without accumulator: 254 cm³/s Lasdpfx Ajx D Hnyol Noa • Metering stroke: 207 mm / max. nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / max. injection speed: 160 mm/s • Clamping force: 2420 kN / max. opening stroke: 550 mm / min. mould height: 300 mm / max. mould height: 580 mm / max. platen distance: 1130 mm • Platen size (h x v): 880x830 mm / tie bar spacing (h x v): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Dimensions Machine depth: 6460 mm

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler Lodpfx Alox D Rqro Nsaa • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, vpenjalna sila: 500 kN, premer vijaka: 25 mm, injekcijska masa: 46 g, skupna višina: 1.779 mm, skupna masa: 4.200 kg, This SUMITOMO SHI DEMAG Intelect 2 50/370-110 was manufactured in 2020. It features a fully electric direct drive system, NC5+ control for enhanced energy efficiency, and precise injection dynamics. Included with the machine are a granulate dryer, an industrial robot, a conveyor belt, and temperature control units. Ideal for high-quality injection moulding processes. Please contact us for more information about this machine. Additional Equipment • Granulate dryer • Handling system • Conveyor belt – 1400 mm x 400 mm • Precision scale • Temperature control units – 2x HB-Therm Machine Advantages Technical Machine Advantages • Exceptional energy efficiency • Increased platen rigidity and mould safety • Fully electric direct drive • Ultra-precise direct drive motors with a response time of 0.1 ms • Displacement: 52 cm³ • Injection pressure: 2180 bar • Clamping platens: 520 x 570 mm Lasdpfx Alex D Eccs Nea Additional Information Control Unit Modern control system with NC5+ Automatic adjustment of mould height and clamping force Energy-saving routines Dimensions Machine depth: 4308 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 122.158 h, vpenjalna sila: 3.300 kN, premer vijaka: 60 mm, This hydraulic injection moulding machine, DEMAG ET 330 - 1450, was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for a wide range of applications. The machine is equipped with a Wittmann W322-121 linear robot, enhancing automation capabilities. Take advantage of this opportunity to purchase the hydraulic injection moulding machine DEMAG ET 330 - 1450. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mould installation height: min. 330 mm / max. 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit Code: 1450-60 Lsdpoyg Nkwefx Al Neaa • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cm³ • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Hardened (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0 zone (none) • Maintenance: • Hose replacement performed in 2017 Additional Equipment • Wittmann W322-121 CNC linear robot/extraction unit (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Leto izdelave: 2019, obratovalne ure: 18.138 h, stanje: pripravljen za uporabo (rabljen), skupna masa: 25.340 kg, Ta stroj SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 je bil izdelan leta 2019. Gre za robusten električni stroj za brizganje plastike s premerom polža 50 mm, zapiralno silo 3.500 kN in razmakom med stebri 820 mm. Obdelal je 18.138 delovnih ur in opravil 12.875.090 ciklov. Če iščete zmogljiv in kakovosten stroj za brizganje, priporočamo, da razmislite o tem modelu SUMITOMO SHI DEMAG El-Exis SP 350/820-1600, ki je naprodaj pri nas. Dodatne informacije • Premer polža: 50 mm Ledpfex D Nxzjx Al Neaa • Največji dozirni volumen: 530 cc • Število ciklov: 12.875.090 • Razmak med stebri: 820 mm • Zapiralna sila: 3.500 kN

Stanje: novo, DEMAG: zavorni obroč / zavorna obloga / stožčasta zavorna obloga – 50 kosov (novo). Lasdpfx Alsyy Taks Nja 1. Tip: KB 160 – 4 kosi. 2. Tip: KB 100 – 2 kosa. 3. Tip: KB 200 – 2 kosa. 4. Tip: KB 140 – 2 kosa. 5. Tip: KB 125 – 5 kosov. 6. Tip: KB 112 – 1 kos. 7. Tip: KB 90 – 2 kosa. 8. Tip: KB 80 – 11 kosov. 9. Tip: št. 405 – 1 kos. 10. Tip: št. 616 654 – 5 kosov. 11. Tip: št. 620 606 – 7 kosov. 12. Tip: št. 612 648 44 – 6 kosov. 13. Tip: št. 628 626 44 – 2 kosa. DEMAG: zavorni pokrov / pokrov zavore – 38 kosov. Različne velikosti (novo / rabljeno).

Stanje: rabljeno, Leto izdelave: 2003, vpenjalna sila: 150 kN, delovna prostornina: 399 cm³, tlak vbrizgavanja: 1.598 letvica, skupna masa: 7.500 kg, premer polžastega transporterja: 50 mm, Dobavni pogoji: iz lokacije Dobavni rok: po dogovoru Ljdpfsylz Aiox Al Noaa Plačilni pogoji: 100% pred prevzemom stroja, neto

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1986, številka stroja/vozila: MIKA-CN, Tehnične podatke: 1x Demag KBK 1 stebrno vrtljivi žerjav NL 125KG z verižnim vitlom Demag DC (125 kg - letnik 2007) Nosilnost pri polnem iztegu: 125KG Višina: cca 3,05 m Višina pod konzolo: cca 2,55 m Iztez: 3 m Višina kljuke: cca 2,15 m Skupna teža: cca 300KG Z verižnim vitlom Demag DC 125KG Vključuje: zatič, vodilo za kable, voziček, zaključni pokrov itd. Območje vrtenja 300°, priklop na 400V 16A Žerjav je demontiran in takoj na voljo Lsdpfx Aljyu E I Ie Nsaa Lokacija artikla: 75053 Gondelsheim Na voljo so tudi drugi žerjavi, nosilnosti 80-5000Kg, povprašajte za več informacij Glejte slike Dostava s špedicijo ali osebni prevzem le po dogovoru o terminu

Stanje: dober (rabljeno), Demag chain hoist Model: PK2N-F, PK2N Lifting capacity: 250 kg (single-strand) or 500 kg (double-strand), Sample photo, various versions available, Laedpocalf Aefx Al Nea Ready for immediate use.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 800 kN, premer vijaka: 30 mm, Injection moulding machine from Demag, model 80/420-200 System, for sale. The machine is in good and fully functional condition. ATTENTION: No backup disks available Technical data: Lasdpfonfu I Isx Al Nsa Year of manufacture: 2001 Clamping force: 800 kN Tie bar distance (vertical): 420 mm Tie bar distance (horizontal): 420 mm Platen size (horizontal): 590 mm Platen size (vertical): 600 mm Minimum installation height: 250 mm Maximum platen gap: 700 mm Opening stroke: 450 mm Ejector stroke: 150 mm Ejector force: 41 kN Max. mold weight: 700 kg Screw diameter: 30 mm Dimensions: approx. 4.5 x 1.5 x 2 m Weight: 4 t Transport and loading can be organised across Europe at extra cost on request. Prices plus VAT. Inspection possible upon appointment. Please contact us—our team is happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet economical metalworking machine for your production? Or would you like to sell yours? For more information or ways to contact us, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Injection Moulding Machine DEMAG System 800/1120-9500 Basic Information Manufacturer: DEMAG Model: System 800/1120-9500 Year of manufacture: 2008 Clamping Unit Clamping force: 8,000 kN Mounting platen dimensions (horizontal × vertical): 1620 × 1500 mm Tie bar spacing (horizontal × vertical): 1120 × 1000 mm Minimum mould height: 500 mm Maximum mould height: 1050 mm Maximum daylight between platens: 2080 mm Opening stroke: 1030 mm Ejector stroke: 350 mm Ejector force: 139 kN Maximum mould weight: 7,200 kg Injection Unit Screw diameter: 130 mm Shot volume: 7300 cm³ Shot weight (PS): 6640 g Maximum injection pressure: 1300 bar Screw length: 20 L/D Electrical and Hydraulic Equipment Pump drive rated power: 110 kW Heater power: 79 kW Hydraulic oil tank capacity: 1300 l Machine Dimensions and Weight Machine dimensions (L × W × H): 12.3 × 2.7 × 2.7 m Machine weight: 33,500 kg Control cabinet weight: 9,700 kg Ljdpfxeyugcts Al Nsaa Optional Energy Saving System (ESS) The machine can be equipped with a modern ESS servo drive system, which increases the energy efficiency of hydraulic plastic injection moulding machines. The system controls the hydraulic pump motor operation via a frequency inverter, adjusting the motor speed to the current requirements of the production cycle. As a result, electrical energy is only consumed when the machine actually requires it. Key Benefits - Reduction of electricity consumption by up to 30% - Hydraulic pump servo drive technology - World-class, proven technology used in plastics processing industry - Reduced energy losses during idle - Lower hydraulic system temperature rise - Extended service life of hydraulic components - Suitable for retrofitting existing hydraulic injection moulding machines The ESS system significantly lowers machine operating costs while maintaining full production parameters.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine Basic data Manufacturer: DEMAG Model: System 1500/1500-16000 Year of manufacture: 2008 Clamping unit Clamping force: 15,000 kN Platens dimensions (horizontal × vertical): 2150 × 1880 mm Tie bar spacing (horizontal × vertical): 1500 × 1250 mm Minimum mould height: 700 mm Maximum mould height: 1400 mm Maximum opening stroke: 2900 mm Injection unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Maximum injection pressure: 1454 bar Electrical and hydraulic equipment Pump motor rating: 165 kW Heater power: 97 kW Machine dimensions and weight Net machine weight: 74 t Control cabinet weight: 21 t Total weight: approx. 95 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service history / repairs 2010 – new screw with RSP and barrel 2015 – new IBED 2015 – new wiring board (cable plate) 2017 – new motor and pump no. 2 2017 – new injection cylinder piston rod with seals 2017 – replacement of oil cooler circulation pump 2017 – TeachBox (robot) replacement 2018 – replacement of P1 + P3 pumps (at 65,800 h) 2018 – hydraulic oil change Optional ESS Energy Saving System The machine can be equipped with a modern ESS servo drive system, significantly improving the energy efficiency of hydraulic injection moulding machines. The system controls the operation of the hydraulic pump motor using a frequency inverter, which adjusts the motor speed to match the machine’s actual demand during the production cycle. As a result, electrical energy is consumed only when it is actually needed. Key benefits: - Reduction of electricity consumption by up to 30% - Servo technology for hydraulic pump drive Lasdpfx Aoyugalol Noa - World-class, proven technology used in plastics processing industry - Reduced energy losses during machine idle - Lower heating of hydraulic circuit - Extended service life of the motor and hydraulic components - Possible retrofitting to existing hydraulic injection moulding machines The ESS system allows for significantly reduced machine operating costs while maintaining full production capabilities.

Stanje: dober (rabljeno), Gear motor, electric motor, geared electric motor, crane motor, crane drive -Manufacturer: DEMAG, gear motor from Lotze HDZK swivel bending machine -Type: 24/14K4 -Speed: approx. 60 rpm -Shaft: Ø 45 x 70 mm -Motor: 5 kW / 1420 rpm -Voltage: 220/380 V -Dimensions: 980/400/H410 mm -Weight: 255 kg Laodpsip Erasfx Al Nja

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: dober (rabljeno),

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Oprema: dokumentacija / priročnik, Demag Systec 100/420-310 (2015) Panel: NC5 Vpenjalna sila: 100 t Premer vijaka: 30 mm Razdalja med stebri V: 420 mm Razdalja med stebri H: 420 mm Tip: Horizontalen Pogon: Hidravličen Laodjyg Eu Sopfx Al Nja Morda kupiti Wittmann W818 linearni robot Z = 1500 mm

Leto izdelave: 2024, stanje: novo, Demag NC3 panel, new, never used. Width: 30 cm Laedeqvuinopfx Al Nea Height: 5 cm Length: 50 cm

Leto izdelave: 2024, stanje: novo, Demag Panel NC3 Made in Germany Width 30 cm Height 5 cm Length 50 cm Lasdpoqvuigefx Al Noa TYPE: 6EJ5 398-0DE14

Stanje: rabljeno, Funkcionalnost: omejena funkcionalnost, vrsta prenosa: hidrostat, vrsta goriva: dizel, barva: rumena, skupna masa: 20.000 kg, število sedežev: 1, prva registracija: 01/1992, Leto izdelave: 1992, številka stroja/vozila: 20412, Oprema: dodatne luči, kabina, parkirni grelec, Ponujamo ta rabljen mobilni dvigalo Mannesmann Demag V 73, letnik 1992. Tip: V 73 Številka šasije: 20 412 Leto prve uporabe: 1992 Lasdpoyi D Ddjfx Al Nea Dovoljena skupna masa: 20.000 kg Dovoljena obremenitev prednje osi: 10.000 kg Maksimalna nosilnost: 14 t Maksimalni doseg: 13 m Zadnji pregled: 2023 Omejevalnik nosilnosti ni v delovanju. Za vprašanja ali dodatne informacije nam lahko pišete.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2009, Span: 35 m Load capacity: 130 tons Includes 2 x 75 m A75 rails Ljdpet D H H Ajfx Al Noaa Drawings available on request No hoisting unit Can be adapted for use as an overhead or gantry crane if required