Motor dvigala KBH 160 B2/12

Demag

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 96.986 h, vpenjalna sila: 600 kN, premer vijaka: 30 mm, This hydraulic injection moulding machine, model DEMAG ET60-200 concept, was manufactured in 2003. It features a clamping force of 600 kN and a maximum mould weight of 580 kg. The machine is equipped with a robust injection unit featuring a screw diameter of 30 mm and an injection pressure of 1900 bar. Take advantage of this opportunity to purchase the DEMAG ET60-200 concept hydraulic injection moulding machine. Contact us for further information. • Clamping unit: Fjdsyg Nfuspfx Abvsfw • Tie bar spacing (H x V): 420 x 420 mm • Platen dimensions (H x V): 530 x 540 mm • Min. mould installation height: 210 mm • Opening stroke: 400 mm • Max. mould weight: 580 kg (moving side 380 kg / fixed side 200 kg) • Ejector: • Stroke: 125 mm • Force: 41 kN • Retraction force: 15 kN • Pneumatic ejector: Yes • Core pull control: Yes (2 units, on ejector side/ES) • Injection unit 1: • Unit size: 200 • Screw diameter: 30 mm • Injection pressure: 1900 bar • Shot volume: 106 ccm • Shot weight (PS): 94 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Armoured/wear-resistant injection unit: Yes • Process control: SPC (Yes) • Note: Maximum crane load warning: 2 tonnes Additional equipment • Robot / parts removal device: W621-1381 • Strokes: Y 1200 mm, X 550 mm, Z 1500 mm • Hot runner controller: integrated 7-zone control • Tool sensors: Kistler (p=1/t=0)

Stanje: kot nova (razstavni stroj), Used/refurbished lifting motor for a DH wire rope hoist ATTENTION! We have more than 15,000 Demag parts in stock. Ffjdpsh Up Uyjfx Abvew For further information, please visit our website or see our other listings.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2015, obratovalne ure: 15.642 h, Splošni podatki Širina: 1810 mm Globina: 6950 mm Višina: 2213 mm Teža stroja: 15.750 kg Enota za vbrizgavanje Premer polža: 45 mm Vpenjalna enota Vpenjalna sila: 350 ton Mediji Notranje hlajenje: Da Dodatna oprema Fanuc robot Ta stroj SUMITOMO SHI DEMAG Systec SP 350/720-840 je bil proizveden leta 2015. Gre za hidravlični stroj za brizganje plastike, primeren za natančno procesiranje plastike. Izkoristite priložnost za nakup hidravličnega stroja za brizganje SUMITOMO SHI DEMAG Systec SP 350/720-840. Za več informacij nas kontaktirajte. Fjdpfx Abjx D Hntsvsfw Vrsta aplikacije Brizganje plastike

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 27.551 h, vpenjalna sila: 2.200 kN, skupna višina: 2.100 mm, This SUMITOMO SHI DEMAG IntElect 220/610-750 smart was manufactured in 2013. It is an electric injection moulding machine renowned for its precision and efficiency. Ideal for anyone looking to expand their production capabilities with reliable technology. Contact us for further information. Additional Equipment Ffodpfox D Hnyex Abvew • Sepro robot SDR 22 Machine Advantages Technical Machine Specifications • Screw diameter: 45 mm / screw geometry: standard / l/d ratio: 20 / specific injection pressure: 2150 bar / max. shot volume: 329 cm³ / max. shot weight: 293 g / injection rate without accumulator: 254 cm³/s • Metering stroke: 207 mm / max. nozzle stroke: 450 mm / nozzle immersion depth: 20 mm / nozzle contact force: 58 kN / number of heating zones: 4 / hopper capacity: 50 l / max. injection speed: 160 mm/s • Clamping force: 2420 kN / max. opening stroke: 550 mm / min. mould height: 300 mm / max. mould height: 580 mm / max. platen distance: 1130 mm • Platen size (h x v): 880x830 mm / tie bar spacing (h x v): 610x560 mm / ejector stroke: 150 mm / ejector force: 58 kN • Dry cycle time according to Euromap 6 (stroke): 427 mm • Net weight without oil: 10,100 kg Dimensions Machine depth: 6460 mm

Stanje: novo, as well as other types, as a package Ffodpfjf Ddzqjx Abvow

Leto izdelave: 2019, obratovalne ure: 17.716 h, stanje: pripravljen za uporabo (rabljen), Splošni podatki Širina: 1920 cm Globina: 7750 cm Teža stroja: 26.210 kg Višina: 2410 mm Ta električni stroj za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920 je bil izdelan leta 2019. Robusten električni stroj za brizganje s premerom polža 40 mm in zapiralno silo 3.500 kN. Deloval je 17.716 ur in izvedel 12.440.761 ciklov, kar omogoča obsežne proizvodne zmogljivosti. Razmislite o nakupu električnega stroja za brizganje SUMITOMO SHI DEMAG El-Exis SP 350/820-920. Za več informacij nas kontaktirajte. Fsdpfxjx D Nx Io Abvefw Vrsta uporabe Brizganje plastike

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), This DEMAG Systec 210/580-840 was manufactured in 2019. It is a hydraulic injection moulding machine with a clamping force of 210 tons and a power rating of 60 kW. The machine has been in operation for 31,132 hours. Consider the opportunity to purchase this DEMAG Systec 210/580-840 hydraulic injection moulding machine. Please contact us for further information. • The dosing unit (orange part) is not included. Ffsdpox D Nluofx Abvow • Integrated country-specific socket combination • Can be switched off via the main switch and shutdown program • 2 x Schuko 1Ph/230V/16A; 2 x IECEE 3Ph/400V/16A residual current circuit breaker • Pneumatic 5/2 valve no. 1 on the movable mould mounting platen; • Programmable, supplied via central air connection • Includes hoses. Inputs and outputs freely programmable; 3 inputs and 3 outputs; • Terminal point located outside the control cabinet • Interface for additional nozzle heating band; socket only • 2-circuit core pull via solenoid valve on the movable mould mounting platen; operation independent of clamping force (programmable); • With pilot-operated check valves to prevent core creep • Mould connection dimensions E (similar to Euromap March 96) • With side-mounted ejector plate, centering diameter of the fixed platen: 160 mm • Centering diameter of the moving platen: • Mold installation height increased by 100.0 mm • Min: 340 mm • Max: 790 mm

Stanje: dober (rabljeno), Leto izdelave: 1992, Dvoranski žerjav, žerjav, električni vitel z jeklenico, dvižni mehanizem, motorni jekleni vitel, motorni vitel, koloturnik, vlečni vitel, škripčevje -Proizvajalec: Stahl, žerjavni voz z električnim vitlom z jeklenico -Žerjavni voz: Tip GO 24 20 16 -Hitrost vožnje: 20 m/min -Razmik med kolesi: 800 mm -Jekleni vitel: Tip AS 2010 -Vlečna sila: 1000 kg / nosilnost 4000 kg -Hitrost bobna: 16 m/min / dvižna hitrost 4 m/min -Transportne mere: 1250/1180/V400 mm -Lastna masa: 356 kg Fedpfx Absl Tuvdsvjfw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2020, obratovalne ure: 8.000 h, Splošni podatki Dimenzije širina: 1264 mm Ffodpjx D Eccjfx Abvjw Dimenzije globina: 4308 mm Dimenzije višina: 1779 mm Teža stroja: 4200 kg Vbrizgalna enota Premer vijaka: 25 mm Teža vbrizga: 46 g Ogrevalna moč: 5,7 kW Tlak šobe: 30 kN Zatezna enota Zatezna sila: 500 kN Maksimalna odprta odprtina: 710 mm Razdalja med vodili: 370 x 370 mm Minimalna višina orodja: 200 mm Maksimalna višina orodja: 410 mm Hod izmetalca: 90 mm Izmetalna sila naprej/nazaj: 25 kN Dodatna oprema Sušilnik granulata Sistem za rokovanje Transportni trak - 1400 mm x 400 mm Precizna tehtnica Temperirne enote - 2x HB‑Therm Ta stroj SUMITOMO SHI DEMAG Intelect 2 50/370-110 je bil izdelan leta 2020. Odlikuje ga popolnoma električni neposredni pogon, upravljanje NC5+ za izboljšano energijsko učinkovitost in natančno dinamiko vbrizga. Vključuje sušilnik granulata, industrijskega robota, transportni trak in temperirne enote. Idealno za visokokakovostne procese brizganja plastike. Za dodatne informacije o stroju nas kontaktirajte. Področja uporabe Brizganje plastike

Leto izdelave: 2005, stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen Ffjdex D Rqropfx Abvjw • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: kot nova (razstavni stroj), For sale Demag wheel blocks ATTENTION! Ffedpeh Uqibsfx Abvjw We have more than 15,000 Demag parts in stock For further information, please visit our website or see our other listings.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 17.577 h, Splošni podatki Mere širina 1460 mm Mere globina 5370 mm Mere višina 2060 mm Fodpfxjx D Hnmo Abvsfw Vpenjalna enota Vpenjalna sila 1600 kN Dodatna oprema Sepro robot SDR 11 Stroj SUMITOMO SHI DEMAG IntElect 220/610-750 smart je bil izdelan leta 2013. Gre za električni stroj za brizganje plastike, ki je poznan po svoji natančnosti in učinkovitosti. Je odlična izbira za vse, ki želijo povečati svoje proizvodne zmogljivosti z zanesljivo tehnologijo. Za več informacij nas kontaktirajte. Področja uporabe Brizganje plastike

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 122.158 h, vpenjalna sila: 3.300 kN, premer vijaka: 60 mm, This hydraulic injection moulding machine, DEMAG ET 330 - 1450, was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for a wide range of applications. The machine is equipped with a Wittmann W322-121 linear robot, enhancing automation capabilities. Take advantage of this opportunity to purchase the hydraulic injection moulding machine DEMAG ET 330 - 1450. Contact us for further details. • Clamping Unit: • Clamping force: 3630 kN • Tie bar spacing (H x V): 710 x 630 mm • Platen dimensions (H x V): 1040 x 950 mm • Mould installation height: min. 330 mm / max. 830 mm • Opening stroke: 675 mm • Platen distance (daylight): 1505 mm • Permissible mould weight: fixed side (DS) 1200 kg; moving side (AS) 2400 kg; total 3600 kg • Ejector: stroke 200 mm; force 80 kN; retraction force 35 kN • Core pull control: yes (2 units, on ejector side/AS) Fjdpsyg Nkwsfx Abvsfw • Shut-off nozzle: yes (hydraulic/pneumatic 1/1) • Injection Unit 1: • Unit Code: 1450-60 • Screw diameter: 60 mm • Injection pressure: 1905 bar • Shot volume: 763 cm³ • Shot weight (PS): 695 g • Screw L/D ratio: 20 • Nozzle radius: 15 mm • Maximum dosing stroke: 270 mm • Plasticising rate: 41 g/s • Equipment/Controls: • Hardened (wear-resistant) injection unit: yes • Pneumatic ejector: yes • Process control: SPC (yes/yes) • Printer interface: integrated • Hot runner control: 0 zone (none) • Maintenance: • Hose replacement performed in 2017 Additional Equipment • Wittmann W322-121 CNC linear robot/extraction unit (included with the machine) • Travel paths: Y-axis 1600 mm, X-axis 500 mm, Z-axis 2500 mm

Stanje: novo, JAN REILING BV has an extensive inventory with over 15,000 different DEMAG parts, ranging from nuts to complete cranes. In addition to new parts, we also supply used parts, hoists, and cranes. Our refurbished hoists, cranes, parts, and drives are available in fully overhauled condition from our warehouse. JAN REILING BV delivers exactly what you're looking for without delay. JAN REILING BV has built up an extensive supplier network across Europe. In addition to DEMAG, we can quickly and cost-effectively supply you with parts for all other brands as well. We offer a wide range of new Demag parts from stock, including: rope guides, hoist ropes, brake linings, rope pulleys, hoist motors, trolley motors, fine lift motors, bottom blocks, load hooks, travel wheels, pinions, radio controls, bottom hooks, cable drums, trolleys, motors, travel motors, ropes, chains, and more. Fedpfx Abeh Upx Ievjfw KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P00DH P10 P1250 P1201 DMR DR DC PK DK Contact us to discuss the available options. We supply both new and used equipment.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones Ffjdpsyfq Alsfx Abvow • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)