KBH 112 B2/12 motor dvigala

Demag

Leto izdelave: 1992, Stanje: dober (rabljeno),

Stanje: kot nova (razstavni stroj), Used/refurbished lifting motor for a DH wire rope hoist ATTENTION! Kdsdpfxeh Up Uyo Af Tjg We have more than 15,000 Demag parts in stock. For further information, please visit our website or see our other listings.

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), This SUMITOMO SHI DEMAG El-Exis S 250/630-1450 injection moulding machine was manufactured in 2005. It features a central accumulator for high-speed injection and chrome-plated tie bars. The pump drive power is 22.0 kW, operating at a mains voltage of 400 V / 50 Hz. The machine is equipped with a colour data display featuring a VGA interface, an oil cooler, and an electric screw drive. Please inquire about the possibility to purchase this hydraulic injection moulding machine SUMITOMO SHI DEMAG El-Exis S 250/630-1450. Contact us for further information. • 5 similar units available • Central accumulator for high-speed injection; core, ejector, and nozzle movement • Nozzle movement parallel to mould movement • Chrome-plated tie bars at the clamping unit • Pump drive power: 22.0 kW • Mains voltage: 400 V / 50 Hz, 3 Ph + N + PE • Separate power connections for drive and heating • Control system: colour data display with VGA interface and AT keyboard interface • Injection, holding pressure and back pressure via servo valve • Reinforced oil cooler • Separate water connections for mould and oil cooling • Compliance: basic European version, conforms to applicable safety regulations • Paint finish: bottom anthracite grey RAL 7016; upper section blue 571C MD Kdjdpfxjx D Rqre Af Tsg • Elastic machine suspension • Ultrasonic position measuring system with digital data transmission for injection, ejector, mould (M) and nozzle (AWH) movements; 1/100 mm resolution for injection axis • Reduced centring diameter (D=100/125) for the fixed platen • Mould mounting dimensions type E (similar to EUROMAP), without side ejector plate • Standard mould installation height • Safety interlock: mould opening and ejector forward only with safety gate closed • Ejector with position control via proportional valve; pressure and speed can be programmed independently • Frequency-controlled electric screw drive

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, vpenjalna sila: 2.500 kN, premer vijaka: 50 mm, injekcijska masa: 482 g, skupna višina: 2.400 mm, skupna masa: 14.900 kg, This SUMITOMO SHI DEMAG El-Exis S250/630-1600 was manufactured in 2012. It features a clamping force of 2,500 kN, a screw diameter of 50 mm, and a maximum shot weight of 482 g. The machine offers a dry cycle time of 1.2 seconds and a total installed power of 57.9 kW. If you are looking for a high-quality injection moulding machine, consider the SUMITOMO SHI DEMAG El-Exis S250/630-1600, which we are offering for sale. Please contact us for further information. • Clamping unit size: 250 • Holding force: 2,750 kN • Platen size (H x V): 930 x 930 mm • Tie bar spacing (H x V): 630 x 630 mm • Ejector retraction force: 40 kN Kdjdpfjx D Nwqsx Af Tjg • Injection unit (size 1600) • Screw geometry: standard • L/D ratio: 25 • Injection rate (PS, without accumulator): 530 cm³/s • Metering stroke: 270 mm • Maximum nozzle stroke: 110 mm • Material hopper capacity: 110 l • Electric dosing drive: 13.1 kW • Barrel heating: 14.8 kW • Dry cycle time (EUROMAP 6): 1.2 s • Dry cycle stroke (EUROMAP 6): 441 mm • Dimensions • Maximum drive projection with nozzle contact: 184 mm • Maximum drive projection with nozzle retraction: 1279 mm • Maximum shot weight in polypropylene is 482 g with a screw diameter of 50 mm Dimensions Machine depth: 6,600 mm

Stanje: kot nova (razstavni stroj), Used/refurbished hoist motor for a DH wire rope hoist Kedpfxoh Up U Dj Af Tsdg ATTENTION! We have more than 15,000 Demag parts in stock. For further information, please visit our website or see our other listings.

Stanje: dober (rabljeno), Leto izdelave: 2008, vpenjalna sila: 2.000 kN, premer vijaka: 50 mm, Oprema: dokumentacija / priročnik, Vpenjalna sila: 200 t Premer vijaka: 50 mm Razdalja med stebri (V): 580 mm Razdalja med stebri (H): 580 mm Tip: Horizontalen Pogon: Hidravlični Ksdsyark Topfx Af Tsdg

Stanje: dober (rabljeno), Leto izdelave: 2010, vpenjalna sila: 1.600 kN, Oprema: dokumentacija / priročnik, Vpenjalna sila: 160 t Kodpfx Aoyarfdef Tjdg Premer vijaka: 40 mm Razdalja med stebri V: 520 mm Razdalja med stebri H: 520 mm Tip: Horizontalen Pogon: Hidravlični

Leto izdelave: 1992, Stanje: dober (rabljeno), Overhead crane, crane, electric wire rope hoist, lifting unit, motor cable winch, power winch, chain hoist, traction winch, pulley block -Manufacturer: Stahl, crane trolley with electric wire rope hoist -Crane trolley: Type GO 24 20 16 -Travel speed: 20 m/min -Wheelbase: 800 mm Kjdpfx Afjl Tuvde Tsdg -Wire rope hoist: Type AS 2010 -Pulling force: 1000 kg / Load capacity 4000 kg -Drum speed: 16 m/min / Lifting speed 4 m/min -Lifting height: mm -Transport dimensions: 1250/1180/H400 mm -Net weight: 356 kg

Stanje: rabljeno, Električni verižni dvigalo DEMAG Tip PM 8 - Manulift Tov. št.: 5319450 Leto izdelave: 1979 Nosilnost: 80 kg Razpon kljuke: 2,9 metra Razdalja med obešanjem in kljukom za tovor: 700 mm Glavna hitrost dviga: 12 m/min. Fina hitrost dviga: 2 m/min. 1 nosilna veriga = 80 kg Ročno upravljanje Manulift neposredno na žerjavski kljuki Omrežna priključitev: 380 V, 50 Hz Teža: 20 kg dobro stanje Kjdpfx Aexcbnlsf Tedg

Stanje: rabljeno, prevoženi kilometri: 221.291 km, Leto izdelave: 2009, obratovalne ure: 15.356 h, Drive: Wheel Unladen weight: 22,000 kg Lifting capacity: 30,000 kg Serial number: 86584 Front tire condition: 70% Rear tire condition: 70% Transport dimensions (L x W x H): 8.3 x 2.4 x 3.45 m Please contact PFEIFER GROUP for further information. Kjdpfx Aswwqbyjf Tsdg

Stanje: kot nova (razstavni stroj), For sale Demag wheel blocks ATTENTION! We have more than 15,000 Demag parts in stock Kjdpfx Afjh Uqibj Todg For further information, please visit our website or see our other listings.

Stanje: dober (rabljeno), Leto izdelave: 2012, vpenjalna sila: 2.800 kN, Oprema: dokumentacija / priročnik, Demag Systec 280/630-600 (2012) Zapiralna sila: 280 t Premer polža: 45 mm Teža brizga: 294 g Razdalja med stebri (V): 630 mm Razdalja med stebri (H): 630 mm Prostornina brizga: 323 cm3 Tip: Horizontalen Pogon: Hidravlični Kdjdpfsxykw Rjx Af Tsg

Stanje: rabljeno, prevoženi kilometri: 62.585 km, Leto izdelave: 2020, obratovalne ure: 5.422 h, Drive: Wheel Unladen weight: 48,000 kg Lifting capacity: 220,000 kg Serial number: 82609 Front tire condition: 90% Rear tire condition: 90% Transport dimensions (L x W x H): 15.3 x 3 x 4 m Please contact PFEIFER GROUP for further information. Kjdpfewk Aw Hex Af Todg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Brand: Oerlikon / SAF Kdjdpfx Afolffdys Tjg Model: LP100 Year: 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm Rotational speed: 100-1200 mm/min Wheel width: 235 mm Wheel diameter: 450 mm Distance between travel wheels: 1930 mm (between flanges) Travel speed: 4 m/min Equipped with wired remote control with buttons for rotation direction, variable speed control, and travel of the turning device. Power supply: Three-phase 380V Supplied with manual and CE documentation.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998,