Motor dvigala KBH 180 B2/12

Demag

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2003, obratovalne ure: 28.646 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 810 g, This DEMAG El Exis S250/630-2300 was manufactured in 2003. It offers a clamping force of 2500 kN, a screw diameter of 60 mm, and a shot volume of 891 cm³. The machine features a linear robot system and a 9-zone hot runner mold temperature control unit. Take this opportunity to purchase the DEMAG El Exis S250/630-2300 electric injection molding machine. Contact us for further information about this machine. • Clamping unit • Locking force: 2750 kN • Tie bar distance (H x V): 630 x 630 mm • Platen size: 950 x 950 mm • Minimum/maximum mold installation height: 330 mm / 830 mm • Maximum daylight (open space): 1505 mm • Opening stroke: 675 mm • Ejector stroke/force: 200 mm / 80 kN • Mold weight capacity: 3300 kg total (1100 kg fixed / 2200 kg moving) • Injection unit (Type 840) • Screw diameter: 60 mm • Shot volume: 636 cm³ • Shot weight (PS): 579 g • Injection pressure: 1351 bar • Screw speed: 326 rpm • Plasticizing rate (PS): 74 g/s • Nozzle: radius 15 mm / bore 3 mm • Injection unit (Type 2300) • Screw diameter: 60 mm • Shot volume: 891 cm³ • Shot weight (PS): 810 g • Injection pressure: 2420 bar • Power and drive • System type: Hydraulic (pump motor) • Pump motor power: 37 kW • Installed heating capacity: 14.8 kW • Hybrid drive power consumption: • Installed total power: 124 kW • Electric screw drive: 47 kW • Electric clamp drive: 32 kW • Hydraulic pump: 22 kW Podoyftamspfx Aczepl • Options/controls • Core pulls: 2x (moving side) • Needle shut-off control: 1x hydraulic / 0x pneumatic • Mold temperature control: 9-zone hot runner integrated • Interfaces: printer, SPC process control • General specifications • Oil tank: 700 liters • Dry cycle time: 2.00 s • Noise level: 74 dB(A) • Owner’s note • Describes a hybrid high-speed machine equipped with a larger injection unit (Type 2300 vs. Type 840) than the above-mentioned stock machine. Additional equipment • Linear robot W633-961 (axes: X=900 mm / Y=1600 mm / Z=2500 mm)

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2010, nosilnost: 200 kg, doseg roke: 2.400 mm, PLC Merkezi olarak, stoklarımızdaki endüstriyel robotlarımızla özel mühendislik projeleri gerçekleştirebilmekteyiz. Bu örnekte olduğu gibi, sizin ihtiyaçlarınıza yönelik projelerde size yardımcı olabiliriz: - Kaynak - Kesme - Makine Besleme - Paletleme - Depaletleme - Mermer İşleme - Abkant Makinesi Besleme ve Sac Bükme - Ve birçok farklı proje Marka: KUKA Model: KR200-3 Comp Durum: Revizyonlu, 1 yıl garantili Sürüm: V5.6.12 Podpeq Dpxdjfx Aczspl Yıl: 2010 Kontrol Kabini: KRC2 ed 05 Taşıma Kapasitesi: 200 kg Erişim Mesafesi: 2400 mm Dahil Olanlar: Manipülatör + Kontrol Kabini + Tüm Kablolama Setleri + Teach Pendant + 1 adet Hertz Spindle Motor (Yeni) + Delta Spindle (Mekanik Sistemle Setli) + Takım Değiştirme Masası Dahil Olmayanlar: 7. Eksen, Mühendislik Tasarımı ve Danışmanlık Sevkiyat: Fiyata DAHİL DEĞİLDİR Ödeme: Teslimattan önce %100 ödeme

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, obratovalne ure: 91.810 h, vpenjalna sila: 2.500 kN, premer vijaka: 60 mm, injekcijska masa: 579 g, This DEMAG ET250/630-840 Concept was manufactured in 2004. It features a clamping force of 2,500 kN and a locking force of 2,750 kN. The machine is equipped with a Wittmann linear robot and supports a maximum mould weight of 3,300 kg. It is fitted with a screw diameter of 60 mm and offers a shot volume of 636 cm³. Consider this opportunity to purchase this hydraulic injection molding machine DEMAG ET250/630-840 Concept. Contact us for further information on this machine. • Locking force: 2,750 kN • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions (H x V): 950 x 950 mm • Mould height: 330–830 mm • Opening stroke: 675 mm • Max. daylight (distance between platens): 1,505 mm • Mould weight: fixed side 1,100 kg, moving side 2,200 kg (total 3,300 kg) • Ejector: • Stroke: 200 mm • Force: 80 kN • Centring ring diameter: 200 mm • Pneumatic ejector: yes • Core pulls: 2 on moving side (AS) • Injection unit: • Unit size: 840 • L/D: 20 • Shot volume: 636 cm³ • Injection pressure: 1,351 bar • Plasticising rate (PS): 74 g/s • Screw speed: 326 rpm • Nozzle radius: 15 mm; nozzle orifice: 3 mm • Max. dosing stroke: 225 mm • Note: Second injection unit listed without data → single-component machine • Interfaces/controls: • Printer interface: yes • Process control/SPC: yes Additional equipment Ppjdpfx Aeyfq Alsczol • Robot/handling: Wittmann W633-961 linear robot • Travel distances: Y (vertical) 1,600 mm, X 900 mm, Z 2,500 mm • Hot runner control: 9 zones • Mould monitoring: Kistler pressure (p=1) / temperature (t=0) system • Needle shut-off control: hydraulic (not equipped for pneumatic)

Stanje: dober (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, pomik po osi Z: 1.500 mm, Oprema: dokumentacija / priročnik, Število osi: 3 Pjdpjyfhw Hofx Aczepl Doseg: 1500 mm Nosilnost: 5 kg X=420 mm Y=1200 mm Z=1500 mm

Stanje: rabljeno, 5tSWF Craning Technology Ltd. Ppjdodc A R Tepfx Aczel

Stanje: dober (rabljeno), Leto izdelave: 1975, Crane trolley, manufacturer: DEMAG, type: PL 168 NF, year of manufacture: 1975. Load capacity: 3,200 kg, lifting height: 4 m. Equipped with pendant control. In good condition. Ppsdpfx Asubbr Toczol

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, nosilnost: 2.000 kg, Mostovno dvigalo DEMAG - M + PK10-N-F MACH-ID: 9360 Proizvajalec: DEMAG Tip: M + PK10-N-F Leto izdelave: 1991 Motoriziran vrtljivi doseg 0° - 270° Nosilnost 2000 kg Visoka hitrost 4000 mm/min Nizka hitrost 10000 mm/min Ppedpfxoyfd N Ss Aczsl Priložene knjige / pregledne knjige Prosimo, upoštevajte: Informacije na tej strani smo zbrali po najboljšem vedenju, kjer je bilo mogoče tudi od proizvajalca. Podatki so podani v dobri veri, vendar za točnost ne moremo jamčiti. Tako te informacije ne predstavljajo zavezujoče ponudbe ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: dober (rabljeno), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation. Pedpsd Tx Ahofx Aczepl

Stanje: dober (rabljeno), Leto izdelave: 2006, Clamping force: 250 tons Tie bar spacing: 630 x 630 mm Mold height: 330 x 830 mm Opening stroke: 675 mm Max. diameter: 1505 mm Screw diameter: 50 mm Shot volume: 530 cm³ Shot weight: 482 g Injection pressure: 2426 bar Pedpfx Aorgw Exsczspl Cores: 2 Hot runner: 12 + Demag ergotech W733-0174 robot Year of manufacture: 2006 Handling capacity: 10 kg Number of axes: 3 Max. reach: 1000 mm (X-axis), 900 mm (Y-axis), 1400 mm (Z-axis), 2500 mm

Leto izdelave: 2019, obratovalne ure: 18.138 h, Stanje: pripravljen za uporabo (rabljen), skupna masa: 25.340 kg, Ta stroj SUMITOMO SHI DEMAG El-Exis SP 350/820-1600 je bil izdelan leta 2019. Gre za robusten električni stroj za brizganje plastike s premerom polža 50 mm, zapiralno silo 3.500 kN in razmakom med stebri 820 mm. Obdelal je 18.138 delovnih ur in opravil 12.875.090 ciklov. Če iščete zmogljiv in kakovosten stroj za brizganje, priporočamo, da razmislite o tem modelu SUMITOMO SHI DEMAG El-Exis SP 350/820-1600, ki je naprodaj pri nas. Ppjdjx D Nxzjpfx Aczol Dodatne informacije • Premer polža: 50 mm • Največji dozirni volumen: 530 cc • Število ciklov: 12.875.090 • Razmak med stebri: 820 mm • Zapiralna sila: 3.500 kN

Leto izdelave: 2023, obratovalne ure: 0 h, Stanje: novo, HB12X6 (optional 12X3) is suitable for bending your reinforcing steel meshes into the desired shape. Product information: - Motor power: 7.5 kW (5.5 kW) - Voltage: 380 V - Length: 6400 mm (3400 mm) Podpfjm Tmddex Aczepl - Width: 1000 mm - Height: 1090 mm - Hydraulic oil capacity: 36 l - 6 m (3 m optional) - 3 stops - Bending angles: 45°-90°-135° - Weight: 1250 kg (710 kg) Shipping: Europe-wide (self-collection also possible) If you have any questions, please do not hesitate to contact us!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, obratovalne ure: 12.396 h, vpenjalna sila: 4.200 kN, premer vijaka: 70 mm, Ta DEMAG Ergotech 4200-2300 je bila izdelana leta 1998. Gre za hidravlični brizgalni stroj z zapiralno silo 4200 kN in vključenim Wittmann robotom. Razmislite o priložnosti za nakup tega hidravličnega brizgalnega stroja DEMAG Ergotech 4200-2300. Kontaktirajte nas za dodatne informacije. Pjdpfx Ajx D Hyvjczepl • Wittmann vključen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR853 robot Year of manufacture: 2015 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Dosage volume: 1212 cc Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping unit design: toggle Control system: NC5 Additional equipment: Euromap 67 Robot interface Controller with pneumatic valve Controller for 5 hot runners Ppjdpsyctgbefx Aczjl Injection unit hardened – bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication 3 hydraulic pumps with variable output Integrated printer Machine regularly serviced by authorized Sumitomo Demag service Wittmann-Demag DR853 Robot Year of manufacture: 2016 6-axis robot: 5 axes powered by electric servo motors: X, Y-telescopic, Z, B, C Travel distances: X-1200, Y-2400, Z-4000 mm Touch control panel Robot safety package Robot with adapter, conveyor belt, and safety housing Robot and conveyor belt can be purchased at additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All machines offered are test-run by our service technicians prior to sale. It is possible to receive a video of the technical testing of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: kot nova (razstavni stroj), Used/refurbished lifting motor for a DH wire rope hoist Podpfx Ash Up Uyeczopl ATTENTION! We have more than 15,000 Demag parts in stock. For further information, please visit our website or see our other listings.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Sumitomo Demag Systec 350/720-2300 / Production line with Wittmann-Demag DR833 robot Year of manufacture: 2012 Injection unit: Screw diameter: 70 mm Shot weight: 1103 g Injection pressure: 1877 bar Shot volume: 1212 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 720x720 mm Platen size: 1040x1060 mm Ejector: hydraulic Clamping mechanism: toggle lever Control system: NC5 Additional equipment: Euromap 67 Robot interface Air valves x 5 Hydraulic core pull with proportional valve control x 1 Hot runner control x 5 Hardened injection unit - bimetallic Moog proportional valve on the injection unit – precise injection Parallel movements Central lubrication Pjdpfx Aceyctfqozjpl 3 variable output hydraulic pumps Integrated printer Machine has been regularly maintained by authorized Sumitomo Demag service Robot Wittmann-Demag DR833 Year of manufacture: 2011 4-axis robot: 3 axes are driven by servomotors (electric), Y-axis telescopic; C-axis pneumatic, A-axis movement Travel paths on axes: X-900, Y-1600, Z-3000 Touch control panel Robot safety package Robot with adapter, conveyor belt and protective enclosure Purchase of the robot and conveyor belt at an additional cost Dimensions: Weight: 15,750 kg Length/Width/Height: 8.26x2.01x2.27 m All offered machines are commissioned by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: Upon request