Deckel Fp 2 nakup rabljenega (701)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 40.255 h, Funkcionalnost: popolnoma funkcionalen, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in travelling column design. The machine was built in 2008 and underwent a complete retrofit in 2022, featuring an upgrade to Siemens Sinumerik 840D Solution Line. Equipped with: - 5-axis simultaneous operation license - Siemens Sinamics drive technology - Siemens OP15 Black Operator Panel - MCP control panel and electronic handwheel Technical Specifications: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Type: 5-axis universal machining center / travelling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Retrofit / Modernization: Siemens CNC & drive retrofit 2022 5-axis simultaneous operation: license available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 - 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V Power-on hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X axis: Siemens Sinamics 160 A, 2x SMC20 encoder module Y axis: Siemens Sinamics 50 A, 2x SMC20 encoder module Z axis: Siemens Sinamics 80 A, 2x SMC20 encoder module B axis: Siemens Sinamics 25 A, 2x SMC20 encoder module A axis: Siemens Sinamics 25 A, 2x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2x SMC20 encoder module Lhsdjyuzg Hspfx Adkjd Operator panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: - 5-axis simultaneous operation license - Axis licenses - Operator software license Equipment: - Integrated rotary table / swiveling bridge structure - Paper tape filter system - Coolant / filter unit - Electrical cabinet - Full enclosure - Work area lighting - Siemens operator console Condition: - Machine is in well-maintained condition - Upgraded Siemens control and drive technology - 5-axis simultaneous operation available

Stanje: dober (rabljeno), Leto izdelave: 1986, Milling Machine Deckel FP3NC Manufacturer: Deckel Model: FP3NC Year of manufacture: 1986 Control: Dialog 4 Condition: Used Travel (X/Y/Z): 400 / 400 / 400 mm Quill stroke: 80 mm Spindle speed: 40 rpm to 3600 rpm Swiveling milling head Hydraulic tool clamping Vertical/Horizontal SK40 Electronic handwheel Control panel for tool change and program start Documentation Lamp Lhjdpfxoyub Epo Adkjd Coolant system Full enclosure NC T400 rotary table Weight: approx. 2000 kg Electrical cabinet weight: 300 kg

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP4M Aktiv Manufacturer: Deckel Model: FP4M Condition: used, good Digital readout: 3-axis digital display Heidenhain Lhjdoyub Aujpfx Adked Travel: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table clamping area: approx. 700 x 400 mm Spindle speed range: approx. 50 – 2500 rpm Tool holder: ISO 40 Tool clamping: hydraulic Drive power: approx. 6.0 kW Feeds & rapid traverses: on all 3 axes Feed range: approx. 8 – 630 mm/min Rapid traverse: approx. 3.0 m/min Dimensions (L x W x H): approx. 2300 x 1800 x 1800 mm Weight: approx. 1750 kg Machine lamp Spindle guard Scope of delivery: – 10x tool holders – Allmatic high-pressure vise – Documentation – Spindle guard

Stanje: rabljeno, 1 kos preciznega brusilnega stroja FRIEDRICH DECKEL 2025-1295 z digitalnim prikazovalnikom HEIDENHAIN, skladno s slikami in ogledom Lhjdpfx Adoyr H Iqsksd Barva: zelena Stanje: rabljeno Lokacija blaga: proizvodna hala / desno Način plačila: predplačilo z bančnim nakazilom Dostava: samo osebni prevzem – Dostava za to postavko ni možna!

Stanje: dober (rabljeno), Interna št. artikla: 26031 Univerzalni rezkalni stroj Deckel FP1 Brezstopenjski pomik + Razni nosilci orodij SK40 + Set vpenjalnih tulec (S20x2) + Hidravlična strojna primež Röhm 110 Servomotor je bil obnovljen! Ljdpsyqx S Eefx Adkohd Pomiki: X300 / Y160 / Z340 mm Hod pinole: 60 mm Priključna moč: 1,9 kW Število hitrosti vretena: 16 Območje obratov: 40-2000 obr/min Držalo orodja: SK40 Pomik: brezstopenjski 5-500 mm/min Stroj je popolnoma delujoč in ga je mogoče po dogovoru pod napetostjo ogledati na več kot 500 m² ogrevani skladiščni površini.

Stanje: rabljeno, Leto izdelave: 1984, številka stroja/vozila: 2804-1181, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, širina mize: 450 mm, dolžina mize: 700 mm, največja hitrost vrtenja: 3.150 obr/min, vrtljajska hitrost (min.): 32 obr/min, rabljeni orodjarski rezkalni stroj DECKEL, model FP 3A CNC Velikost mize 700x450 mm, vpenjalo vretena SK40 DIN 2080, prehodi: X/Y/Z = 500/400/400 mm, vrtljaji od 31,5 do 3150 obr/min (v 21 delovnih hitrostih vretena), hitrost pomika 5-1250 mm/min, hitri pomik v X, Y in Z 2500 mm/min, hladilna naprava in strojni podstavki. Leto izdelave stroja: 1984, stroj je bil leta 2010 obnovljen pri podjetju Harich. Stroj je pri nas v 71334 Waiblingen-Beinstein in si ga lahko ogledate. Prosimo, kontaktirajte nas. Ljdpoyrnvvofx Adkohd

Stanje: rabljeno, Leto izdelave: 2006, x-pomak 1.250 mm y-pomak 1.000 mm Ljdpjyui Ncjfx Adkohd z-pomak 1.000 mm Upravljanje MillPlus B-os -30 - +180 ° Prihvat alata HSK 100 Brzine vretena - bezstupanjsko 20 - 10.000 o/min Snaga pogona 100% ED 25,00 kW Snaga pogona 40% ED 38,00 kW Obrtni moment pri 40% / 100% ED 288 / 187 Nm Posmak X/Y/Z-os 20 - 10.000 mm/min Brzi hod X/Y/Z 60,00 m/min Površina steznog stola Ø 1.100 mm Opterećenje stola 1,50 t Magacin alata: lančani magacin 120 kom Prečnik alata 110 mm Prečnik alata sa slobodnim susednim mestima 230 mm Maks. dužina alata 500 mm Maks. težina alata 30,00 kg Brzina obrtanja stola, bezstupanjska 10 - 500 o/min Ukupna potreba za snagom 85,00 kW Težina mašine cca 25,00 t Potrebna površina cca 9,00 x 6,50 x V3,50m m 5-osni obrtno-glodajući centar za obradu sa upravljanjem MillPlus IT FD; dvostrukim izmjenjivačem paleta; hladnjak za rashladnu tečnost; hlađenje kroz vreteno; transporter strugotine; rotirajući zaštitni prozor; elektronski ručni točkić. Vreteno novo 10/25 Obrtni sto remontovan 2022.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 23.663 h, potovalna razdalja osi X: 560 mm, pomik osi Y: 600 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik 840D, skupna višina: 2.500 mm, skupna masa: 10.600 kg, število osi: 4, This 4-axis DECKEL MAHO DMC 55H duoBlock was manufactured in 2007. It features X, Y, and Z travels of 560 mm, 600 mm, and 600 mm respectively, and a spindle speed of 12,000 rpm. The machine is equipped with an SK40 spindle taper, a tool magazine with 60 positions, and four 400x400 mm pallets, with the fourth axis indexed in 1-degree increments. Take this opportunity to purchase this DECKEL MAHO DMC 55H duoBlock horizontal machining center. Contact us for more information about this machine. Additional Equipment • 4 pallets 400 x 400 mm, included with the machine, 4th axis indexed in 1-degree increments • Workpiece probe • Through-spindle coolant • Large coolant tank with automatic coated filter paper Machine Advantages Technical Advantages Lhjdpfxeytumde Adkjd • Table size: 400 x 400 mm • Tool magazine: 60 positions Additional Information Machine still under power Dimensions Machine depth 6000 mm Technical Specification Through-spindle coolant: Yes

Stanje: dober (rabljeno), Leto izdelave: 1986, potovalna razdalja osi X: 710 mm, pomik osi Y: 600 mm, pomik po osi Z: 455 mm, x-pomik 710 mm y-pomik 600 mm z-pomik 455 mm Krmilnik Dialog 4 Število obratov 6300 min⁻¹ Vpenjalno mesto SK40 Hod pinole 80 mm Velikost mize 550 x 1000 mm Obremenitev mize 0,6 t Skupna potrebna moč kW Lhodjyvyz Hepfx Adkod Teža stroja pribl. 4 t

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, največja hitrost vretena: 8.000 obr/min, skupna masa: 3.800 kg, premer obdelovanca (maks.): 250 mm, potovalna razdalja osi X: 400 mm, pomik osi Y: 310 mm, teža orodja: 50.000 g, število osi: 5, This 5-axis Michael Deckel S22 was manufactured in 2005. It features a maximum grinding wheel diameter of 150 mm and a spindle speed range of 300 to 8,000 rpm. The machine has a robust weight of 3,800 kg and is equipped with a cooling/filtration system from Transor Filter GmbH. If you are looking for a high-quality internal grinding machine, the Michael Deckel S22 internal grinder we have for sale is worth considering. Contact us for further details. • Operating voltage: 3 × 400 V • Electrical connection: 3P / N / PE • Frequency: 50 / 60 Hz • Rated current: 25 A • Fuse protection: 32 A • Power consumption: 15 kW • Control voltage: 24 V DC • Spindle speed: 300 - 8,000 RPM • Control unit: Michael Deckel S22 • Grinding spindle speed: infinitely variable • Direction of rotation: right and left • Working speed: 40 m/s • Max. grinding wheel diameter: 150 mm • Max. grinding wheel width: 20 mm • Grinding heads: cylindrical and conical • Maximum diameter: 125 mm • Width: 50 mm • Clamping and grinding range • Max. workpiece diameter: approx. 250 mm • Max. workpiece length: approx. 900 mm • Max. grinding length: approx. 400 mm • Max. grinding length in work programs: approx. 320 mm • Tool holder taper: SK50 • Max. tool weight: 50 kg • X-axis travel: 400 mm • X-axis feed rate: 12 m/min • Y-axis travel: 310 mm Lodpeyr H Idefx Adkehd • Y-axis feed rate: 12 m/min • Machine weight: 3,800 kg Additional equipment • Cooling/filtration unit: Transor Filter GmbH (2007)

Stanje: rabljeno, Leto izdelave: 1983, Technical details: Ledpfx Adowgdz Eekshd X-travel: 560 mm Y-travel: 500 mm Z-travel: 450 mm

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, vhodna napetost: 380 V, Oprema: dokumentacija / priročnik, Stroj je v dobro ohranjenem in popolnoma delujočem stanju. FP1 je opremljen z delilno glavo in originalnim vpenjalnim sistemom Erowa (ITS 148) vključno s paleto. Pribor in popolna dokumentacija sta na voljo. Lhedpfxoyvh A Eo Adked Po želji je mogoče dodatno kupiti tudi nagibno mizo (cena: 476 € bruto). Deckel stroj je bil malo rabljen in je primeren za uporabo v orodjarni, izdelavo elektrod/posameznih delov ali za izobraževanje. Tehnični podatki: Proizvajalec: Friedrich Deckel AG Model: FP1 Letnik: 1985 Napetost: 380 V / 50 Hz (trifazni tok) Krmiljenje: FP1-2101 Ogled in preizkus sta možna kadarkoli po dogovoru. Za več informacij ali vprašanja sem vam na voljo. Prosimo le za resna povpraševanja.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 560 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, hitrost pomika os X: 3.600 m/min, hitrost podajanja osi Y: 3.600 m/min, hitrost podajanja os Z: 3.600 m/min, poteza s peresom: 80 mm, največja hitrost vretena: 4.000 obr/min, hitrost vretena (min.): 40 obr/min, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 4 m/min, hitri pomik na osi Z: 4 m/min, dolžina mize: 530 mm, širina mize: 900 mm, največja hitrost vrtenja: 4.000 obr/min, vrtljajska hitrost (min.): 40 obr/min, obremenitev mize: 450 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is exceptionally stable and robust due to its design and construction. Its excellent accessibility makes it extremely user-friendly. The machine can also be moved using mechanical handwheels. Lhsdpfx Aoyn Dq Iodksd CNC Path Control DECKEL Dialog 11: Easy-to-program 3D path control with color graphic support, dialog-guided cycle entry, contour path calculator, editor functions, clear program and tool management, and parallel programming capability. Travel paths X / Y / Z: 560 / 500 / 450 mm Tool holder: SK40 DIN 69872 Clamping system: Hydromechanical clamping system SK40 with pull studs according to DIN 2080 or DIN 69872 Working spindle: Vertical and horizontal. Vertically extendable quill, manual travel 80 mm. Milling head: Manually swivels +/- 90° Spindle speed range: 40–4000 rpm, geometrically stepped Direct drive transmission for maximum torque and milling performance at the working spindle Feed rate: 2–3600 mm/min, steplessly adjustable Rapid traverse: 4000 mm/min Swivel table: 530 x 900 mm, max. load capacity 450 kg

Stanje: rabljeno, Leto izdelave: 2003, DECKEL MAHO - DMU 125P HI-DYN - 2003 Lhodpfx Aeyulc Sjdkod - 3+2 osi - sistem Heidenhain TNC530 - pomiki X/Y/Z = 1250/880/800 mm - osi C in B - rotacijska miza 1250x1000 mm - nosilnost mize 2000 kg - obrati vretena 20-18000 min⁻¹ - motor vretena 28 kW - delovne ure vretena 29217 - teža 7500 kg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 18.700 h, proizvajalec krmilnikov: SIEMENS, model krmilnika: Sinumerik, obremenitev mize: 3.100 kg, skupna masa: 24.500 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 35.000 W, teža orodja: 6.000 g, število osi: 3, This 3-axis DECKEL MAHO DMF 250 linear was manufactured in 2005. It is a robust vertical machining center featuring a high-speed main spindle drive up to 40 kW and rapid traverse rates of 100 m/min in the X-axis and 60 m/min in the Y- and Z-axes. The worktable measures 3,100 × 900 mm with a load capacity of 3,100 kg. If you are looking for a high-quality milling machine, consider the DECKEL MAHO DMF 250 Linear we are offering for sale. Please contact us for further information. Additional equipment • Safety features: monitored and interlocked work area door; key switch for normal and setup mode; limited functions with the door open Advantages of the machine Technical benefits of the machine • Feed rate: up to 20,000 mm/min • Clamping surface: 3,100 × 900 mm • T-slots: 9 slots, 100 mm spacing • Tool magazine capacity: 30 positions • Measuring system resolution: 0.001 mm • Electrical connections: Mains connection 3N/PE~400/230 V, 50/60 Hz; Power consumption 82 kVA • Pneumatics: Compressed air 5.5-8 bar; Air volume 25 m³/h (without cooling), +20 m³/h with cooling • Weight (kg): with accessories: up to 29,280 kg Additional information Ambient temperature: +15°C to +35°C Humidity: 20-75% Tool magazine size 120 - magazine cabinet Tool change by shuttle Tool holders available only on request and subject to availability (extra) Machine is a 3-axis model (rotary table not available) Lhjdsx Nr Tuepfx Adkjd Further configuration or AB is no longer available. Z-axis brake is defective, roller door in machine area defective, shielded cable defective

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.100 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 426, število osi: 3, Ta 3-osna DECKEL MAHO DMU 200T je bila izdelana leta 2001. Opremljena je s krmiljenjem Heidenhain TNC 426, hitrostjo vretena 5000 min⁻¹ ter hodi X: 1800 mm, Y: 2000 mm, Z: 1100 mm. Ima tudi nosilec orodja HSK-E32 s 60 mesti. Če iščete visokokakovostni rezkalni stroj, razmislite o stroju DECKEL MAHO DMU 200T, ki ga ponujamo v prodajo. Kontaktirajte nas za dodatne informacije. Lhjdpfx Aoyair Iodksd Dodatne informacije Stroj je še vedno pod napetostjo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, potovalna razdalja osi X: 2.600 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 900 mm, proizvajalec krmilnikov: SIEMENS, model krmilnika: 840D sl, največja hitrost vretena: 15.000 obr/min, moč vretenovega motorja: 46.000 W, število osi: 5, Ta 5-osni DMG DECKEL MAHO DMF 260-11 je bil izdelan leta 2017. Gre za univerzalni obdelovalni center z gibljivo portalno konstrukcijo, linearnim pogonom X-osi s hitrostjo 80 m/min in motorno vreteno z do 15.000 obr/min. Stroj je opremljen z vrtljivo glavo, 30-postajnim magazinom orodij ter fiksno mizo dimenzij 3.200 x 1.100 mm. Izkoristite priložnost za nakup tega univerzalnega obdelovalnega centra DMG DECKEL MAHO DMF 260-11. Za več informacij o stroju nas kontaktirajte. Lodpfx Adex D Iclskohd Tehnične specifikacije Stožec SK 40

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 26.827 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.600 mm, pomik osi Y: 700 mm, pomik po osi Z: 700 mm, hitro pomikanje X-os: 40 m/min, hitri pomik os Y: 40 m/min, hitri pomik na osi Z: 40 m/min, dolžina podajanja os X: 2.600 mm, dolžina pomika po osi Y: 700 mm, dolžina podajanja os Z: 700 mm, hitrost pomika os X: 40 m/min, hitrost podajanja osi Y: 40 m/min, hitrost podajanja os Z: 40 m/min, nazivna (navidezna) moč: 42 kVA, proizvajalec krmilnikov: Siemens, model krmilnika: 840 D SL Operate, teža obdelovanca (maks.): 6 kg, skupna višina: 2.800 mm, skupna dolžina: 7.000 mm, skupna širina: 5.000 mm, širina mize: 700 mm, dolžina mize: 2.900 mm, obremenitev mize: 2.150 kg, največja hitrost vrtenja: 8.000 obr/min, skupna masa: 14.500 kg, največja hitrost vretena: 8.000 obr/min, delovne ure vretena: 8.280 h, moč vretenovega motorja: 23.500 W, nos vretena: SK 40, število mest v zalogovniku orodij: 30, dolžina orodja: 300 mm, premer orodja: 80 mm, teža orodja: 6.000 g, Oprema: transportni trak za ostružke, We are offering this used Deckel Maho DMF 260 / 700 vertical machining centre, year of manufacture 2010. Technical specifications: X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm Control: Siemens 840 D SL Operate Main Spindle: Speed range – main spindle: 8,000 rpm Main spindle drive power: 23.5 kW Tool holder: SK 40 Work Table: Clamping area: 2,900 x 700 mm Max. table load: 2,150 kg Tool Magazine: Number of tool stations: 30 positions Tool holder: SK 40 Max. tool diameter: 80 mm Max. tool diameter with free adjacent position: 130 mm Max. tool length: 300 mm Max. tool weight: 6.0 kg Feed Rates: Rapid traverse (X / Y / Z): 40 m/min Max. feed speed: 40,000 mm/min Max. feed force: 8 kN Total connected load: 42 kVA Machine weight: approx. 14.5 t Space required: approx. 7.0 x 5.0 x 2.8 m Equipment: Chip conveyor Coolant system High-pressure coolant Internal coolant supply Paper band filter 2x rotating viewing windows Tool magazine 30 positions Probe Operating mode 4 Prepared for 4th axis At approximately 7,500 spindle hours, the X-axis and tool changer were overhauled. If you have any questions or require further information, please feel free to send us a message or call us. Lsdpfx Asytruxodkehd Accessories, pictured tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Technical data and details may be subject to change or error. Prior sale reserved!

Stanje: dober (rabljeno), Leto izdelave: 1989, Deckel FP4MK Aktiv, orodjarska rezkalna stroj s 3-osnim Heidenhain TNC 113, fiksna miza, vreteno s SK 40 vpenjalom in hidravličnim vpenjanjem. Pribor: različne vpenjalne puše in nosilci rezkalnih orodij. Stroj je v dobrem delujočem stanju. Možnost prikaza pod napetostjo po dogovoru. Lhjdpfx Aeyupnledkjd

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1987, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 18369, potovalna razdalja osi X: 400 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, hitrost podajanja os Z: 2 m/min, hod vretena: 80 mm, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 4 m/min, hitri pomik na osi Z: 4 m/min, skupna višina: 2.000 mm, skupna širina: 2.200 mm, skupna dolžina: 2.200 mm, širina mize: 500 mm, dolžina mize: 500 mm, največja hitrost vrtenja: 6.300 obr/min, vrtljajska hitrost (min.): 25 obr/min, obremenitev mize: 2.500 kg, skupna masa: 2.200 kg, višina krmilne omare: 1.500 mm, dolžina elektro omare: 900 mm, širina krmilne omare: 800 mm, teža obdelovanca (maks.): 450 kg, vhodni tok: 22 A, For sale is a Deckel FP3NC tool milling machine with Dialog 4 control system. The machine is visually in decent used condition and comes complete with the Fibro NC rotary table NC-T 400. The machine is currently not operational and is therefore expressly being sold as a project for technicians, a source of spare parts, or for restoration. Known details: Manufacturer: Deckel Model: FP3NC Control: Dialog 4 Machine serial number: 2803-3369 Year of control (according to nameplate): 1987 Operating voltage: 380 V, 3 phases, 50/60 Hz Rated current: 22 A Control voltage: 24 V Rotary table: Fibro NC-T 400 Rotary table year of manufacture: 1986 Fault / Condition: The machine displays error code 30. According to our current knowledge, the issue is likely caused by an empty battery on the circuit board. However, please note that this information is without guarantee, as no further technical inspection or repairs have been carried out. The machine is therefore explicitly being sold as defective. Ideal for: Refurbishers Electronics/CNC specialists Spare parts recovery Export Scope of delivery / includes: Deckel FP3NC machine Dialog 4 control Fibro NC rotary table NC-T 400 Available documentation / operator’s manual / electrical documentation as shown in the pictures Lhodpfjyu Tn Ajx Adkjd Note: Sale is without warranty, guarantee, or return. Inspection is possible by appointment and is expressly encouraged. Loading can be handled by us.

Stanje: rabljeno, Leto izdelave: 2004, potovalna razdalja osi X: 1.800 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.100 mm, skupna višina: 4.375 mm, skupna dolžina: 12.300 mm, skupna širina: 11.200 mm, dolžina mize: 1.600 mm, širina mize: 1.400 mm, obremenitev mize: 3.500 kg, Oprema: dokumentacija / priročnik, Deckel Maho DMC-200 U Series 1512 5-Axis CNC Universal Machining Center, Simultaneous Ljdpfx Aoyu Twkedkohd Control: Heidenhain iTNC 530 Table size: 1600x1400 mm Table load: 3500 kg Number of pallets: 2 Max. workpiece diameter x height: 1950x1100 mm X-axis travel: 1800 mm Y-axis travel: 2000 mm Z-axis travel: 1100 mm C-axis table rotation: 360° B-axis rotation: -7 / 187° Spindle speed: 18,000 rpm Spindle taper: HSK-A63 Spindle motor: 28/19 kW Magazine capacity: 120 Required floor space: 11,200x12,300 mm Height: 4,375 mm Weight: 58,000 kg If you have any questions about the machine or wish to schedule a viewing appointment, please feel free to contact us by phone or e-mail.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, obratovalne ure: 82.828 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1144 000316 3, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, hitro pomikanje X-os: 60 m/min, hitri pomik os Y: 60 m/min, hitri pomik na osi Z: 60 m/min, nazivna (navidezna) moč: 80 kVA, proizvajalec krmilnikov: Heidenhain, model krmilnika: iTNC 530, obremenitev mize: 1.400 kg, premer vrtljive mize: 900 mm, največja hitrost vrtenja: 30 obr/min, skupna masa: 15.000 kg, največja hitrost vretena: 10.000 obr/min, delovne ure vretena: 30.294 h, moč vretenovega motorja: 44.000 W, nos vretena: SK50, število mest v zalogovniku orodij: 60, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Naprodaj: Obratni center DMG DMU 80P Duoblock, letnik 2008. Stroj se že nahaja na Poljskem in ga je mogoče pregledati pod napetostjo. Ključne specifikacije: • Krmilje: Heidenhain iTNC 530 • Stožec vretena: SK50 • Hitrost vretena: 10.000 vrt/min • Obratovalne ure: približno 30.000 h • Sonda za obdelovanec: Heidenhain • Sonda za orodje: BLUM • Programska oprema 3D Quick Set Dodatne informacije: • Popolnoma funkcionalen • Neprekinjeno deloval do razstavljanja • Dobro tehnično stanje Stroj je na voljo takoj. Lhodpfjyvufmjx Adkjd Pregled pod napetostjo je mogoč. Za ceno, dodatne fotografije ali tehnične podrobnosti me kontaktirajte.

Stanje: dober (rabljeno), Various Deckel FP3 milling machines are available for sale, all of which are in good condition. A particular feature of this machine is the mounted table, which can be tilted, rotated, or shifted. Purchasing the machine with a standard milling table is also possible. The machine has been cleaned and tested by us. On request, safety devices can also be installed at an additional cost. L x W x H: approx. 2000 x 1600 x 1900 mm Weight: approx. 1500 kg TECHNICAL DATA Digital readout: 3-axis digital display Travel: X-axis: approx. 500 mm Y-axis: approx. 300 mm Z-axis: approx. 380 mm Spindle: Speed range: approx. 40 - 2000 rpm Tool holder: ISO 40 Drive power: approx. 3.8 kW Tool clamping: manual Feeds & rapid traverses: on all 3 axes Feed rate: approx. 10 - 500 mm/min Rapid traverse: approx. 1.5 m/min Lhsdjiz T Exepfx Adkjd Prices excl. VAT Viewing by appointment possible. Contact us – our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, For sale: Conventional milling machine from Deckel, model FP1 Due to the compact size of the machine, it is ideal for quick jobs in areas with limited space. The machine is fully functional. Technical data: Travel (X-axis): 300 mm Travel (Y-axis): 160 mm Travel (Z-axis): 340 mm Tool holder: SK40 Spindle speed: 40–2000 rpm Control: Conventional Table size: 600 x 210 mm Total power requirement: 2 kW Machine weight: approx. 0.73 t Required space (LxWxH): approx. 1200 x 1100 x 1600 mm Loading and shipping can be organized Europe-wide upon request. Prices are quoted excluding VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Ljdpfxougv Hvj Adkehd Machinery purchase & sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE Do you require a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own machine? For further information or contact options, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 4.500 obr/min, hitrost vretena (min.): 50 obr/min, For sale is a machining center from Deckel Maho, model DMU 50 M, with path control and manual rotary axes. The machine is in very good condition, fully functional, and ready for immediate use. A special feature is the ability to operate in an open enclosure. Lhsdou Unh Ijpfx Adksd Technical specifications: Year of manufacture: 2002 Control: Heidenhain TNC 124 X-axis travel: 500 mm Y-axis travel: 400 mm Z-axis travel: 400 mm Feed rate: 5,000 mm/min Rapid traverse: 5 m/min Tool holder: SK 40 Clamping surface: Ø 700 x 500 mm Rotation range: 360° (mechanical) Swivel range: +90/ -15° (mechanical) Max. load: 200 kg Required space: 4,000 x 3,500 x 2,518 mm Transport dimensions: approx. 2,500 x 1,520 x 2,200 mm Weight: 2,600 kg Additional tool holders available upon request. Transport and loading can be organized across Europe for an additional charge upon request. Prices plus VAT. Inspection possible by appointment. Please contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.