Obdelovalni center

Deckel Maho DMU 125 P duoBLOCK

Stanje: rabljeno, Leto izdelave: 2000, Premer struženja . mm Dolžina struženja . mm Krmiljenje 2x 840 D Dodatna oprema: sistem za hlajenje Transporter ostružkov: da kW Nazivni tok generatorja 95,00 A Priključna moč 65,00 kW Na voljo so 3 stroji Gsdsqn A Rnjpfx Ahmjbn Nakladalni sistem: ? Inventarna številka: 21214 ? Oznaka stroja: Avtomatizacija Promot za 21223 ? Leto izdelave: 1999 x2 / 2000 x1 ? Krmiljenje: Siemens Sinumerik 840D Powerline ? Podatki o električni oskrbi: ? Obratovalna napetost: 10,00 kW ? Nazivni tok: 18,00 A ? Rezerva: 25,00 A 2x 1999 / 1x 2000

Stanje: rabljeno, Leto izdelave: 1974, Wheel diameter - max. 400 mm Gsdpst Hww Dofx Ahmobn Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-performance gear shaping machine Type LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm* (possibly larger) Max. internal gearing diameter approx. 350 mm Max. gear width 75 mm Module range 0.5-6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Clearance between shaping spindle / machine body 205 mm Spindle bore approx. MT 5 Stroke rates roughing/finishing 118 - 1,000 /min Table size 400 mm Table bore 125 mm Height between table and shaping head min./max. 190/290 mm Fixed shaping spindle overhang 250 mm Axial table travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Circular feed at tool Ø 125 0.125 - 3.150 mm /stroke Spindle/main drive approx. 19 kW / 25 kW- 380 V - 50 Hz Weight 7,000 kg Accessories / special equipment: - Hydrostatic linear guides with separate hydraulic unit, - Built-in 100 mm intermediate plate for increased shaping head position, - Hydraulic workpiece clamping (RINGSPANN make) integrated in table for flat workpieces and internal clamping, various clamping chucks for different workpiece diameters - Infinitely variable stroke rate adjustment for roughing and finishing operations (SIMOREG DC-Master) - Automatic stroke rate and automatic feed change for roughing and finishing in up to 3 cuts, - Automatic and motorized stroke end lock in upper position after finishing, - Separate control and switch cabinet, - Integrated coolant system with chip conveyor and magnetic separator - Approx. 20 change gears, Condition: satisfactory to good, soon ready for demonstration Delivery: ex stock - as inspected Payment: strictly net, upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 300 mm Maximum turning length: approx. 550 mm Control: PC Fusion CNC 640 T Standard turning diameter: 276 mm Maximum swing diameter: 525 mm Distance from spindle nose to turret face: 115 – 690 mm Spindle speed range – main spindle: 35 – 4,000 rpm Drive power – main spindle: 22 kW Maximum torque: 351 Nm Spindle nose: A2-6" Spindle bore: 76 mm Maximum bar capacity: 64 mm Maximum chuck diameter: 250 mm C-axis: 360° Number of tool stations: 12 positions Tool holder: VDI 40 Shank diameter: 25 mm Gbedpfx Asxmagushmjn Drill shank diameter: 40 mm Turret indexing time: 0.2 / 0.6 sec. Speed range – driven tool positions: 25 – 4,500 rpm Drive power – driven tool positions: 3.7 kW Maximum torque: 35 Nm Speed range – sub-spindle: 35 – 4,000 rpm Drive power – sub-spindle: 7.5 kW Maximum torque: 57 Nm Maximum chuck diameter: 150 mm X-axis travel: 190 (185 + 5) mm Z-axis travel: 575 (580 + 5) mm Sub-spindle (B-axis) travel: 585 (580 + 5) mm C-axis: 360° Rapid traverse X/Z: 30 m/min Rapid traverse C: 400 rpm Rapid traverse B: 18 m/min Feed range X/Z: 0 – 5,000 mm/min Feed range C: 1 – 2,000 °/min Total power requirement: 34 kVA Machine weight: approx. 5.9 t Space requirement: approx. 5.0 x 3.0 x 2.5 m CNC turning and milling center MAZAK – Super Quick Turn 250 MS - Main and sub-spindle - Driven tools - C-axis

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 400 mm, merilno območje os Z: 200 mm, potovalna razdalja osi X: 400 mm, pomik osi Y: 400 mm, pomik po osi Z: 200 mm, vhodna napetost: 230 V, Oprema: Na voljo je tipska ploščica, osvetlitev, Year of manufacture: 2012 Tactile probe: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C: 1.7 + L/250 E0 XY (2D) in [μm] at 20 ±2 °C: 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C: 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP: 2.7 [μm] Single stylus probing deviation, form MPE according to ISO 10360-5:2010 PFTU: 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C: 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C: 1.7 + L/250 Probing deviation MPE according to ISO 10360-7:2011 PF2D 5): 1.7 [μm] Probing deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5): 1.2 [μm] Gbodpfxjuq Nfhe Ahmjn Available services: Delivery, commissioning

Stanje: rabljeno, Paleta z utori T 18H7, primerna za DMG DMC 100 H in DMG DMC 100 U ter DMC 125H/U Duoblock Gbodpoqx Uh Nsfx Ahmen Na voljo več kot 10 palet

Stanje: rabljeno, System: Used piston-diaphragm high-pressure pump / feed pump Type: HMD-G-50-500 Flow rate: 40.0 m³/h Pressure: 1.6 MPa Godpfx Asdkdi Tshmsbn

Stanje: dober (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.000 mm, moč: 13 kW (17,68 KM), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a oscillating head as well as a 750 mm diameter grinding plate. With this machine, the surfaces of both hard stones and soft stones (marble) can be polished, satin-finished, or bush-hammered using the appropriate tooling. Gsdpfx Aherpi E Ajmsbn

Stanje: dober (rabljeno), Leto izdelave: 2011, Ref.-št.: 10615 Proizvajalec: DMG Tip: DMU 210 P Leto izdelave: 2011 Tip krmiljenja: CNC-krmiljenje Krmiljenje: Heidenhain ITNC 530 Lokacija skladišča: Halberstadt Država izvora: Nemčija Št. stroja: 128/XXXX X-hod: 1800 mm Y-hod: 2100 mm Z-hod: 1250 mm Zasukalni razpon: -30 / +180 ° Obremenitev mize: 10000 kg Največji premer vrtljive mize: 1700 Ø Gbodpfx Ahoy H Epwjmsn Območje vrt. hitrosti mize: 12 min/-1 Vpenjalo orodja: HSK 63 Število mest za orodje v magazinu: 60 Vretenaste hitrosti – brezstopenjsko: 24.000 U/min Pribl. teža stroja: 41 t Vreteno: 24000 U/min Pogon za podajalno os A, C: 30 min/-1 Horizontalna glava: 130-1.380 mm Vertikalna glava: 230-1.480 mm Dodatne informacije: Stroj si je mogoče ogledati pod napetostjo.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 540 mm, pomik po osi Z: 850 mm, največja hitrost vretena: 1.500 obr/min, premer struženja nad prečnim suportom: 1.000 mm, skupna dolžina: 2.510 mm, skupna višina: 3.546 mm, skupna širina: 4.155 mm, hitrost pomika os X: 20 m/min, hitrost podajanja os Z: 20 m/min, višina struženja: 825 mm, montažni premer: 1.000 mm, premer obdelovanca (maks.): 1.100 mm, skupna masa: 16.000 kg, VERTICAL LATHE WITH MOTORIZED TOOLS TECHNICAL SPECIFICATIONS: Axes: - Maximum swing diameter: 1100 mm - Maximum turning height: 825 mm - Maximum turning diameter: 1000 mm - X Axis: 500+40 mm - Z Axis: 850 mm Spindle: - Maximum speed: 1500 rpm - Spindle nose: ASA A2-15 - Maximum workpiece weight (including chuck): 1250 kg Turret: - Number of stations: 12 - Maximum speed: 3000 rpm - Turret interface: BMT-85 Feed Rates: - Rapid traverse X - Z: 20 - 20 m/min - X axis ballscrew: Ø 50 x 8 mm - Z axis ballscrew: Ø 50 x 8 mm Motors: - Spindle motor power: 37 - 45 kW - Motorized tool motor power: 7 kW - X - Z axis servo motors: 4 - 7 kW General Data: - Length: 2510 mm - Width: 4155 mm - Height: 3546 mm - Weight: 16000 kg Gbodpfx Ahoyxg N Aomen INCLUDED ACCESSORIES: - CNC control unit 0i-TF Plus (15''), Type 0, color graphic display, Manual Guide I, ONG keyboard, electronic handwheel - Serial, Ethernet, and USB outputs - Belt-driven spindle, 1500rpm, Alpha40/6000i, 37-45 kW, ASA A2-15 - Without chuck - Servo-assisted BMT turret, 12 stations, prepared for motorized tools - Chip conveyor - High-pressure pump 15 bar - 3-color alarm and end-of-cycle signal light - Integrated machine work light - Support feet - Tool box with service keys - Air blow through spindle system - Upgraded turret motor (from Fanuc a30iF (30Nm) to Fanuc a40iF (38Nm)) - Pressure release (dual pressure) - Manual Renishaw M.T.P. presetter - Oil skimmer - Static toolholder kit - Fume extractor preparation - Black color BRAND NEW MACHINE AVAILABLE FOR IMMEDIATE DELIVERY

Stanje: rabljeno, Leto izdelave: 2010, Maximum turning diameter: 320 mm Turning length: 810 mm Control: MSX 701 Maximum spindle speed: 6,000 rpm Drive power – main spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Maximum spindle speed: 6,000 rpm Drive power – sub spindle: 22 / 18 kW Maximum usable bar diameter: 52 mm C-axis: 0.001° Spindle nose: JIS A2-5 Collet chuck: 140 mm Gjdpfx Aev E R E Aohmebn Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW Y-axis travel: 110 mm Number of tool stations: 16 positions Number of driven tool stations: 16 positions Speed range – driven tools: max. 6,000 rpm Drive power – driven tools: 7.5 / 5.5 kW X-travel 1/2: 210 mm Y-travel: 110 mm Z-travel 1/2: 810 mm B-axis: 900 mm Total power requirement: 86 kVA Machine weight approx.: 8.1 t Space requirement approx.: 8.0 x 3.5 x 2.8 m CNC Turning and Milling Center MORI SEIKI - NZ 1500 T2Y - Main and sub spindle - 2 turrets, upper and lower - Y-axis - 2x 16 driven tool positions