Brusilni stroj za zobnike

Reishauer RZ 301 S

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Premer kolesa - maks. 10 - 330 mm Širina kolesa 180 mm Modul - maks. 7 Modul - min. 0,5 Dolžina vpenjanja 420 mm Število zob 10 - 600 Kwjdpfsw I Hq Dox Aacju Nagibni kot - maks. +/- 45° Število obratov 1100 - 1900 vrt/min Premer brusnega koluta 280 - 350 mm Širina brusnega koluta 84 - 104 mm Teža stroja pribl. 5,1 t Potreben prostor pribl. 4,5 x 6,0 x 2,3 m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, This multi-axis lathe CMZ TTL-66-66-T1Y-T2Y was manufactured in 2021. It features a maximum bar diameter of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power of 35.5 kW. The machine is equipped with 2 high-performance spindles with a 66 mm bar capacity, 2 turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis for both upper and lower turret. A 35-bar high-pressure coolant system with filtration and an additional tank is included. Kwodpfxexmhdnj Aacsu Please refer to the attached brochure for further details or contact us directly. Equipment: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for left spindle - Hainbuch AXFIX 65 (standard) 2703/0008 collet chuck for right spindle - Tool presetter - Side chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure stages (35, 15 & 6 bar), including 75 µm filter - Coolant washing nozzle - TA/06000/10 coolant chiller, 8000 W - Machine status light - Tool life management - Tool load monitoring - Programmable automatic part catcher (pneumatic) - The parts extractor is equipped with a pneumatic gripper for part removal (opens and closes pneumatically) - Pneumatic ejector for sub spindle with 100 mm adjustable stroke, end position detected by sensor - Coolant supply through right-hand spindle - Interface for bar loader (unimag) - Preparation for extraction unit, connection flange Ø100 The machine is supplied with chip conveyor, coolant unit and tool package. It can be inspected under power and is available immediately. Operated in single-shift mode only. Further information available on request.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.). Kwsdouy Ifgspfx Aacsu

Stanje: dober (rabljeno), Leto izdelave: 1999, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 650341, Year 1999 with Fanuc 18 TB - 3 axes XZB Marposs E30/E20 Country of manufacture: CH Voltage: 400V/50Hz/3ph Dimensions: 410x220x190 cm Net machine weight: 5,000 kg TECHNICAL SPECIFICATIONS CNC control: Fanuc 18TB Intermediate Section Fixed intermediate section: grinding head R Swiveling section with manual indexing 2.5°: R / RS / UR / URS -210° to +30° Swiveling section with automatic indexing 2.5°: R / RS / UR / URS -210° to +30° Kwsdpew T Tb Hjfx Aacju B axis, resolution 0.1”: R / RS / UR / URS -210° to +30° Standard workhead Swivel range: -10° (+100°) Spindle speed (continuous): 6 – 600 rpm Internal taper mounting: MT5 Reducing sleeve: MT5/MT4 Short outer taper mounting: DIN 55026 / Size 5 Permissible load: 160 Nm Guaranteed roundness for chucking operations Standard: 0.5 µm Option: 0.2 µm Workpiece weight between centers: 150 kg Tailstock Taper mounting: MT4 Quill stroke: 50 mm / 2° Option: fine adjustment with correction (Ø +/- 150 µm) Wheel data Diameter 300: 27 m/s Diameter 400: 35 m/s Diameter 500: 45 m/s UR grinding head Power: 9.2 kW / 12.5 HP Left grinding wheel, max.: Ø 500 x 80 mm Right additional wheel, max.: Ø 400 x 63 mm Internal grinding device: HJN 828 spindle Lower table (Z axis) Distance between centers: 1000 mm Max travel: 1150 mm Max speed: 15 m/min Max resolution: 0.1 µm Upper table Distance between centers 1000 mm, swiveling 0 to 9° Grinding carriage (X axis) Max travel: 320 mm Max speed: 7.5 m/min Max resolution: 0.1 µm Pneumatics Minimum connection: 6 bar Air consumption: approx. 0.6 m³/h Coolant Max connection pressure: 3 bar Required space (version 1000): 3600 x 2000 mm Except for error or omission, technical data is supplied without obligation.

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Kwedpfxetzdyzj Aaceu Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, obratovalne ure: 8.185 h, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 18.000 obr/min, število osi: 5, This 5-axis DMG DMU 60 evo Linear machining center was manufactured in 2013, featuring travels of 600/500/500 mm, a spindle speed up to 18,000 rpm, and a 60-position tool magazine. It is equipped with a Heidenhain iTNC 530 control unit, internal coolant supply at 40 bar, and a chip conveyor with hinged belt. Ideal for complex machining tasks. Contact us for more information about this machine. • Tool magazine: 60 positions • Rapid traverse: 80 m/min • Dynamic package • Internal coolant: 40 bar • Swiveling observation window • Bed flushing system with rinse gun • Operating hours: 14,471 h • Spindle hours: 8,185 h Additional equipment Ksdpex D Dyaofx Aacewu • Hinged belt chip conveyor • Paper band filter, 600 liters • Oil and emulsion mist separator • Heidenhain TS 649 touch probe • 3D quickSET tool kit Technical Specification Tool taper: HSK 63

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna masa: 7.000 kg, Ta stroj je konfiguriran s 4 popolnoma elektronskimi CNC osmi in ima integrirano programsko opremo, ki generira samodejni program. Opis: Največji premer zobnika: 400 mm Širina zobnika: 76 mm Hod: 82 mm Obrati: 150 - 700 obr/min Modul: min. 0,5 mm Modul: maks. 6 mm Teža stroja: približno 7500 kg Električna oprema: – Obratovalna napetost: 380/400 V – Zaščita: 20kVA Stroj z novim CNC Siemens 808D Kwjdpowvbqiofx Aacou Siemens pogoni in servomotorji Nova nadgradnja 2025 Zasloni za samodejno generiranje programov Samodejni cikli NR12 Vključen je: Transporter odrezkov Rezervoar za hlajenje Samodejno mazanje Digitalni nadzor tlaka Hidrostatično vodilo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Siemens control system Bar capacity 32 mm 2 x 12-position turrets with driven tools Kjdpfx Aajwh U Edscewu Main / counter spindle Y-axis on upper turret Parts catcher Chip conveyor IRCO bar loading magazine

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 77.711 h, potovalna razdalja osi X: 650 mm, pomik osi Y: 600 mm, pomik po osi Z: 500 mm, model krmilnika: Heidenhain iTNC530, hitri pomik na osi Z: 45.000 m/min, hitro pomikanje X-os: 45.000 m/min, hitri pomik os Y: 45.000 m/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Hermle C30 U Siemens 840D Stroj VKLOPLJEN: 77.711 h, vreteno VKLOPLJENO: 16.294 h - Vreteno HSK-A63 10.000 min-1 - 32 mest za orodja - Okrogla miza SRT 280 mm z integriranim sistemom vpenjanja SK50 (če ni potreben, se lahko zapre ali pa se predela v sistem vpenjanja z ničelno točko) Kwjdpfx Aaoxcp R Ieceu - Zunanji dovod hladilne tekočine - Notranji dovod hladilne tekočine s papirnatim tračnim filtrom 80 bar - Pištola za čiščenje ostružkov - Transporter ostružkov - Ročni upravljalni modul - Avtomatska vrata kabine - 32 mest za orodja plus 87 dodatnih mest ZM87 - Toplotna kompenzacija - BLUM merjenje orodij Wange - Merilna tipala Renishaw - Posoda za ostružke - Signalna luč Stroj je bil popolnoma preverjen in obstaja geometrijski protokol ter krožni test meritve. Stroj si je možno kadarkoli ogledati in preizkusiti pod napetostjo. Zelo dobro ohranjen stroj.

Stanje: dober (rabljeno), Leto izdelave: 1989, obratovalne ure: 64.136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed/ways cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Speed range: 16 – 3,150 rpm Feed range, longitudinal and facing: 0.5 – 5,000 mm/min Rapid traverse, longitudinal + facing: 9 m/min Main drive: 30 kW Machine dimensions with chip conveyor (L x W x H): 5,400 x 2,200 x 2,000 mm Weight: 6,400 kg Accessories / Special Features: • CNC control GILDEMEISTER EPL 2 with TFT screen General Description: CNC manual input control system with program input via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu navigation and plain text display of all functions. Control keyboard, screen, and handwheel are housed in a separate chip protection cover. The EPL control offers the following features: Programs can be entered and edited directly by the operator via the EPL control without manual program preparation. NC programs in ISO/EIA format can be entered, output, or directly input manually via the serial interface RS 232. Machining cycles: Turning cycles for longitudinal, facing, and contour turning, including stock allowance. Thread cutting. Undercuts as per DIN 509 Form E and F and DIN 76, grinding allowance programmable. Axial and radial grooves according to DIN 471 and 472, including bottom finishing. Radii 90° and chamfers 45°. Automatic cutter radius compensation for cycles, undercuts, grooves, radius, and chamfering. Programming: Kedpfx Aasvr Eh Ejcewu Block-oriented, metric/inch, diameter in absolute input, radius in incremental input, full circle programming, subprogram technique, skip levels for program sections. Zero offset. Operating mode selection via menu. Program input and output: Menu-guided dialogue with operator prompts or direct dialogue. • Hydraulic 3-jaw chuck Ø 315 mm with hollow spindle Ø 80 mm • Hinged belt chip conveyor • 12-station VDI 40 turret, 6 standard tool stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric footswitch for 3-jaw chuck and tailstock quill • Lighting • 12 pcs. various standard tool holders (details to be discussed on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel