Profilni projektor

Baty SM300

Stanje: novo, Saw blade diameter: 350 mm Cutting range at 90 degrees, round: 115 mm Cutting range at 90 degrees, square: 95 mm Cutting range at 90 degrees, rectangular: 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, designed for serial cuts from 60° left to 45° right on steel. Lrodpofg Rlcefx Alhen The machine can also operate in semi-automatic mode. CNC automatic machine with multiprocessor and two axes controlled by the latest generation MEP controller, allowing the programming of up to 1000 different cutting programs—each with different cutting lengths and quantities—for the same material thickness.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Baty SM350 Profile Projector – Powerful Inspection for Demanding Applications The Baty SM350 is a high-end profile projector featuring a 350 mm screen and a robust, precision-machined stage with a measuring range of 250 mm x 125 mm. It is ideal for high-precision optical inspection in environments where reliability and accuracy are of utmost importance. Lsdpfx Aouyh Rpelhsrn XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands the functions to include geometric measurements, such as calculation of angles, radii, and distances. It also enables the creation of tolerance reports. FT2: The most advanced version features a touchscreen interface with Fusion 2D software. This variant includes optical edge detection and comprehensive reporting capabilities, including SPC charts and DXF overlays. The device is equipped with a 3-position lens turret that allows for rapid and effortless switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also delivers advanced measurement capabilities such as edge detection and DXF overlays. These features make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing environments.

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 16 mm - Max. workable length: 200 mm - Spindle speed: 15,000 rpm - Spindle drive power: 3.7 kW Lsdouhbb Ujpfx Alhorn - Minimum C-axis resolution: 0.001° SUB SPINDLE - Max. bar diameter: 16 mm - Z travel: 80 mm - Spindle speed: 10,000 rpm - Spindle drive power: 1.1 kW - Minimum C-axis resolution: 0.001° TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 4 - Driven tool speed: 6,000 rpm FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 200 V - Total power: 8 kW WEIGHT AND DIMENSIONS - Required space: 1850 x 1610 mm - Machine height: 1050 mm - Machine weight: 2050 kg MACHINE HOURS - Operating hours: 21,154 h ACCESSORIES - Control: Fanuc 31i - Driven guide bushing - Parts catcher - Parts ejector - Coolant tank - Bar feeder: LNS ALPHA ST320 - Electrical transformer

Stanje: novo, Leto izdelave: 2025, Faserlaser-Blechschneidmaschine mit Vollschutz Die maximale Schneidfläche beträgt bis zu 12.000 mm x 2.500 mm und eignet sich für eine Vielzahl von Schneidanwendungen. Die spezielle Faserlaser-Düse und der optimierte Schneidprozess ermöglichen ein schnelleres Sauerstoffschneiden von Baustahl, ein gas- und kostensparendes Niederdruck-Nitrogenschneiden von Edelstahl sowie qualitativ hochwertiges Luftschneiden von Baustahl. Durch einen konstanten Gasstrom mit minimaler Turbulenz werden Schneidleistung und Effizienz deutlich verbessert. Die Faserlaserköpfe erkennen hervorstehende Hindernisse, um die Schadensrate effektiv zu reduzieren und Wartungskosten der Laseranlage zu senken. Der Schneidprozess funktioniert zuverlässig auch am Rand dünner Bleche und garantiert schnittfreie Oberflächen ohne Rattermarken. Mit One-Click Processing lassen sich mehrere Bleche in Chargen mit nur einer Einrichtung bearbeiten - ideal für die Serienfertigung. Zustand: Neu Ledpfeh Hd A Ssx Alhern Lasertyp: Faserlaser Laserleistung: 1.000 W – 40.000 W Schneidbereich: 3.048 x 1.524 mm bis 12.500 x 2.600 mm Schneidgeschwindigkeit: 0–110 m/min Positioniergenauigkeit: ±0,05 mm Wiederholgenauigkeit: ±0,03 mm Unterstützte Grafikformate: AI, BMP, DST, DWG, DXF, DXP, LAS, PLT CNC-Steuerung: Ja Kühlungsart: Wasserkühlung

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 34.500 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, OPREMA: Krmilnik FANUC 18i Lrjdpfey Hq Tzox Alhjn Obdelava na zadnji strani Sinhronsko vreteno Pogonska orodja C-os Transportni trak za dele Magazin za nalaganje palic FMB TURBO 3-26

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 360 mm, največja višina reza: 100 mm, Obseg rezanja okroglega jekla pri 90°: 100 mm, dolžina odseka (min.): 300 mm, Fully automatic carbide straight-cut circular saw machine Type KMR 100 AP Completely overhauled to as-new condition – available from stock Lredpjh Uqpvsfx Alhsn WORKING RANGE Round material: 20 – 100 mm Square material: 20 – 80 mm DRIVE POWER Saw motor, frequency controlled: 11.0 kW CUTTING SPEEDS 20 – 150 m/min Includes feed magazine for 6 m bars and sorting unit for crop/end pieces and good parts Suitable for cut-off lengths up to 300 mm Cutting time for Ø 100 mm solid material (1.0037): approx. 7 seconds! Your advantage: – Machine directly overhauled by the manufacturer incl. 6 months parts warranty – All machines are completely disassembled and overhauled – Only original KALTENBACH spare parts are used

Leto izdelave: 2019, stanje: pripravljen za uporabo (rabljen), število osi: 2, This Nikon V-12BDC was manufactured in 2019. It features a 305 mm screen diameter, a measuring stage of 250 × 150 mm, and integrated digital XY and angular readouts for precise measurements. The device is equipped with a 3-position objective turret for quick magnification changes and high-quality halogen illumination for clear imaging. Ideal for production control and precision engineering. Contact us for further information on this machine. • Laterally correct image (no mirror inversion) for easy evaluation • 3-position objective turret for rapid magnification selection • Magnifications: 10×, 20×, 50×, 100× • Screen diameter: 305 mm • Measuring stage travel: 250 × 150 mm (8" × 6"); rotary table Type 2 • Maximum workpiece height: 100 mm • Integrated XY and angular digital display for precise readings • Illumination: combination of contour (transmitted light) and vertical (incident light) • Light source: 24 V / 150 W halogen for high-quality projection • 4-position condenser in transmitted light mode with automatic illumination adjustment for magnification • Optics: semi-transparent mirror for clear incident light images; telecentric lenses for distortion-free imaging across the entire field • Focusing via movable optical head (table remains stable to avoid measurement deviations) Lrsdpsx D I Etofx Alhjn • Measurement accuracy: contour illumination ±0.1%; tilt/surface illumination ±0.15% • Robust construction with precision-engineered guides; workshop-suitable and easy to operate • Proven Nikon quality, made in Japan • Large projection area, suitable for medium-sized and complex workpieces • Quick magnification changes via turret • Ideal for production control, toolmaking, precision engineering, and sample inspection • Flexible upgradability with digital interfaces or SPC connectivity

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, An optical 3D coordinate measuring system Keyence with a 360° 3D scan is available. Measurement accuracy: +/-10µm, repeatability: 2µm, resolution: 0.1µm, point density: 16 million, measuring diameter (low magnification): 300mm, measuring diameter low magnification/stitched: 200mm/500mm, rotation range: 360°, tilt range: 45°, maximum table load: 50kg. Machine dimensions X/Y/Z: approx. 1000mm/1000mm/1000mm, weight: approx. 65kg. Documentation is available. An on-site inspection is possible. Lrsdpfx Alewx Rcyehjn

Stanje: rabljeno, Leto izdelave: 1996, Diameter / mm Workpiece length / mm Lrsdpfxstvm Smo Alhon Length / mm MITUTOYO SURFTEST SV-500 surface roughness tester with OLZE measuring plate Size: 600 x 600 x 80 mm Nominal µm: 16 Actual µm: 10.00 Net weight: 85 kg Information regarding the scope of delivery The package includes only the ordered product. Any additional decorative items or other objects shown in the product images are not included in the delivery.

Leto izdelave: 1982, stanje: rabljeno, Technical Details: Z-axis travel: 260 mm Maximum test force: 49 - 7355 N (test load) Test height: 260 mm Workpiece weight: max. 160 kg Throat depth: 200 mm Interface: RS 232 Input voltage: 230V / 50Hz Total power requirement: 200 VA Machine weight approx.: 250 kg (without base cabinet) Machine dimensions approx. (LxWxH): 0.7 x 0.6 x 1.8 m (with base cabinet) The hardness testing machine, equipped for depth measurement operation, is offered for sale including a base cabinet (Emco model for hardness testers). The device is suitable for the following test methods (manufacturer specifications): Metals: Brinell, Vickers, Rockwell Plastic testing according to DIN 53 456 Other materials: testing possible only after consultation with the manufacturer. Test loads: electronically controlled via microprocessor, strain gauge and DC motor, for M4R-075 = 49 to 7355 N Test table Ø 90 mm, height adjustable via hand wheel Test table mount in accordance with DIN 51 225 = Ø 25 mm Lrjdpsu N Avxjfx Alhen Operation and programming via control panel with graphic-capable, illuminated LC display Accessories: Additional test tables/plates as shown in the photos Incl.