Casadei Fs 51 nakup rabljenega (79)

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is supported on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise protection and chip protection curtains at the infeed and outfeed sides Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating High-performance industrial motor Equipment Details TERSA models with Tersa cutterblock Knife change in seconds When the machine starts, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is set automatically without the need for setting jigs Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard equipment includes electric table adjustment Thanks to the special lifting device, the table position remains secure even without locking Helical-toothed steel infeed rollers ensure a constant and even wood feed Second, rubber-coated feed roller at outfeed Solid kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and Weights Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser: 150 mm Drive Power Main motor: 9 kW Installation Information Required space length: 1305 mm Required space width/depth: 1080 mm Required space height: 1197 mm Space requirement explanation: The dimensions consider maximum travel distances or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Working area explanation: Please add the indicated measurements to the required space to obtain the recommended free installation area for the machine. Thicknesser Thickness table length: 630 mm Thickness table width: 1000 mm Minimum working height: 3.5 mm Maximum working height: 300 mm Ncodpfx Absff Efasbsl Minimum working length: 210 mm Maximum cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phase(s): 3 phases Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Nodjd Hx E Ijpfx Abbecl Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa cutterhead Knife changes in seconds When the machine starts, centrifugal force automatically tensions the knives—self-locking The knife projection is automatically set without using jigs Work table The work table is mounted on four large trapezoidal-thread spindles, guaranteeing maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting system, the table position is reliably maintained even without locking Helically toothed steel feed rollers for constant and even wood feed Second, rubberized feed roller at outfeed Heavy-duty anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions & weights Length: approx. 1170 mm Width/depth: approx. 1003 mm Weight: approx. 660 kg Dust extraction connection Extraction port diameter (thickness): 150 mm Drive power Main motor: 7.5 kW Installation information Required length: 1170 mm Required width/depth: 1003 mm Required height: 1197 mm Note on required space: Dimensions account for maximum travel or working lengths. Machine body length: 1170 mm Machine body width/depth: 705 mm Length: 1000 mm Width: 2000 mm Note on working area: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Thicknessing Thickness table length: 520 mm Thickness table width: 1000 mm Min. working height: 3.5 mm Max. working height: 250 mm Min. working length: 210 mm Max. cutting depth: 8 mm Electrical data Connection voltage: 400 V Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 4500 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Compact wide belt sander with combination sanding unit With special features package – Top condition – Special features package: - On/off switching of the sanding shoe from the control panel - On/off switching of the drum from the control panel - Electronic control Fox 500 KTR - Table extension with two rollers for infeed and outfeed - Automatic table positioning via push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard-equipped with diagonally grooved steel drum Ø 120 mm for calibration Fine adjustment of working height Clear, user-friendly control panel at the front Robust tube-reinforced monoblock steel machine body, robot-welded, with working units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal adjustment option for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel drum Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal design for calibration and sanding of solid wood, particle boards, and veneer Technical data Length (product) approx. 1388mm, height (product) approx. 1668mm Width/depth (product) approx. 1545mm Dust extraction connection Suction nozzle diameter 140mm Electrical data Supply voltage 400V, current type AC Phase(s) 3Ph, mains frequency 50Hz Feed motor power 0.33 / 0.55kW Table height adjustment motor power 0.25kW Drive motor power 7.5kW Nedpfx Abjxac E Hebscl Sanding unit Sanding belt length 1525mm, max. sanding width 950mm Sanding belt width 970mm Feed unit Feed speed 4.5 / 9m/min Workpiece Min. workpiece height 4mm, max. workpiece height 170mm Location: ex stock 54634 Bitburg – immediately available –

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Nsdpjdqzcxefx Abbocl Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, E450PM – AVTOMATSKI ROBNI LEPILNI STROJ V000047 LME450PM-5 z enoto za rezkanje spojev Stroj v vrhunskem stanju Ncedoxac Hwspfx Abbol NAPETOST 400/50/3 KRMILJENJE S 7'' ZASLONOM NA DOTIK ZAMENLJIVA LEPILNA ENOTA VR – MULTIFUNKCIJSKA ČELILNA ENOTA Orodje za ravno/zaobljeno čeljenje KOMPLET ORODIJ R=2 mm SKOBELNA REZILO ZA POVRŠINO ENOTA ZA LOČILNO SREDSTVO LED NOTRANJA OSVETLITEV DOKUMENTACIJA V NEMŠČINI INFRARDEČA SVETILKA za ogrevanje plošč SKOBELNA ENOTA Lokacija: iz zaloge 54634 Bitburg - na voljo takoj -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Casadei Panel Saw Xenia 40, Year 2022 Robust steel and cast iron construction ensures precision, smooth operation, and durability Smooth-running, precise sliding table made from anodized aluminum with proven, permanently smooth ball contact system on hardened rails – 10-year warranty against wear on carbide guideways Six-year HOLZKRAFT warranty against wear on the tilting segments of the saw unit Cast iron saw table Large support surfaces thanks to standard table extension and widening Fold-away rip fence, manually adjustable with fine adjustment Miter fence adjustable, extendable up to 3200 mm, with two folding stops Outrigger with material support roller TECHNICAL DATA Dimensions and Weights Net weight (approx.): 661 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter blade guard: 80 mm Setup Information Ncsdpfjxac R Asx Abbjl Transport width: 1150 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor output: 0.9 kW Motor power output: 7.0 kW Drive motor duty type: S6 Drive motor operating time: 40% Sliding Table and Table Crosscut frame length: 3200 mm Panel Saw Unit Cutting width with rip fence: 1270 mm Max. crosscut width left of saw blade: 3200 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 140 mm Max. cutting height at 45°: 99 mm Saw blade diameter: 400 mm Saw blade speed: 3700 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 8500 rpm EQUIPMENT Scoring unit Anodized aluminum sliding table Handle for sliding table Material support roller on crosscut frame Saw rip fence with round bar guide Stops: professional folding stops Table extension Table widening Pendulum saw blade guard Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Large surfacing tables made of grey cast iron The adjustment of the surfacing table is done via a precise parallelogram system, ensuring that the distance between the table ends and the cutter shaft remains constant in every position The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° The fence tilt can be read from the operator's position Supplied as standard with auxiliary fence Large four-knife cutterhead, precision bearing Smooth operation due to precision unit and heavy cast construction Powerful industrial motor Maximum operator safety with utmost ease of use Chip removal display via scale Manual table adjustment Motor protection switch Equipment Details Including folding auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale and clamping rotary knob Safety Guard The safety guard is foldable and designed to ensure operator protection without hindering the workflow TERSA Models with Tersa Cutterhead System No more adjustment or screwing Cutter knives change within seconds Self-locking Very low noise emission Nodpfx Abjff Efcobecl Perfect planing results Dimensions and Weights Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total table length 2720 mm Infeed table length 1498 mm Max. chip removal 8 mm Fence length 1200 mm Fence height 190 mm Fence tilt range 90° - 45° Dust extraction connection Extraction port diameter 120 mm Drive Power Main motor 7 kW Installation Information Required length 2750 mm Required width/depth 1604 mm Space requirement explanation: Dimensions include maximum travel paths or usable lengths. Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Location: Ex-stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, CASADEI PF 520 M Tersa – Jointer/planer for professional use, with 520 mm planing width and motorized adjustment of the infeed table - Oversized jointer tables made of hardened and stress-relieved cast iron - Rigid steel-cast iron design for precision and durability - The robust fence is easily adjustable and offers a generous support surface - Large fence, tiltable from 90° to 45° Ncsdpob D Sblofx Abbel - Fence tilt angle can be read easily from the operator's position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision unit and heavy-duty cast construction - Powerful 7.0 kW (S6) motor - Maximum operator safety with the simplest operation Scope of delivery: - PF 520 M Tersa - Tilting auxiliary fence - TX-Matic planer cutterhead guard - Reinforced main motor 7.0 kW Technical data: Total length of jointer tables: 2960 mm Planing width: 520 mm Fence dimensions: 1100 x 160 mm Fence tilt range: 90° - 45° Max. depth of cut: 8 mm Cutterhead diameter / number of knives: 120 mm / 4 pcs. Speed: 5000 rpm Motor output 400 V / 50 Hz / P2 / S1: 7.0 kW (9.0 HP) Extraction port diameter: 120 mm Weight: Location: Ex-stock Bitburg Available for immediate delivery

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Ncedegf Sw Nepfx Abbjl Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: novo, Leto izdelave: 2026, CASADEI Libra 35 – Wide Belt Sander, Dual-Belt Version Immediately Available – Ex stock 54634 Bitburg Technical Data: Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Sanding belt width: 1115 mm Sanding belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table height adjustment motor: 0.25 kW Drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Illustration with optional equipment. Wide belt sander in dual-belt configuration for up to 1100 mm working width, with numerous equipment options for cost-conscious craftsmen and workshops. Robust mono-block steel machine frame, reinforced with tubular supports and high-mounted working units for maximum rigidity Nsdpfocr S Ecjx Abbecl User-friendly operation thanks to clearly arranged control panel at the front Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air demand Automatic star-delta start for main motor Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt drive via geared motor with two speeds Flexible steel pressure bar before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with fine adjustment capability for the grit/belt thickness Quality – Made in Europe Version RTC: 1st unit: diagonally grooved steel roller Ø 120 mm, with fine adjustment for calibration 2nd unit: combination unit with fine adjustable working height for calibration and fine sanding; rubber-coated roller Ø 120 mm (45 Shore), and hard sanding pad with graphite plate on replaceable insert Scope of delivery: Working table height adjustment with electronic display of working height Oscillation of sanding belts via electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-backflow device (C.E.) Star-delta starting of main motors Grooved calibration steel roller Selector switch for sanding pad positioning from control panel Optional accessories: – Semi-hard flat sanding pad – Automatic belt centering system Location: Ex stock Bitburg – at a special price

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, Splošni podatki Višina meritev: 1445 mm Dimenzije Dolžina stroja: 2740 mm Ta CASADEI Bordatrice E350PM je bila izdelana leta 2022. Omogoča razpon višine panela od 10 do 45 mm in podpira debelino robnega traku od 0,4 do 2 mm. Stroj deluje s hitrostjo podajalnega traku 7 m/min in močjo ogrevanja posode za lepilo 1490 W. Razmislite o nakupu tega robilnika CASADEI Bordatrice E350PM. Kontaktirajte nas za več informacij. Vrste uporabe Njdpfjx D Icfsx Abbocl Oplemenitenje robov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Casadei Matrix A – identical machine to SCM Compact O, R, L, U - 2-axis control for positioning the units - Four-side planer and profiling machine - Working width: 25 to 230 mm - Working height (wood thickness): 6 to 155 mm - Max. final cross-section of workpiece: 155 x 230 mm - Minimum workpiece length: 480 mm - Max. adjustable cutting depth: 10 mm - Spindle speed: 6,000 rpm MACHINE EQUIPMENT: - Robust, welded machine frame - Sound-insulated, large-area hood with gas struts - Raised control panel on operator side - Steel infeed table 2,500 x 250 mm Table height: 880 mm Side-mounted, spring-loaded infeed conveyor Manual table lubrication after jointer 1) Lower horizontal spindle 5.5 kW 2 & 3) Vertical spindles right and left, each 7.5 kW 4) Upper horizontal spindle 7.5 kW FEED SYSTEM: - Feed speed, adjustable: 5 to 25 m/min Feed motor: 1.1 kW (1.5 HP) ADDITIONAL FEATURES: - CE marking - Power supply: 380 V three-phase, 50 Hz - Lockable main switch, automatic star-delta start Emergency stop at front and rear - Installed power: 37 kW (50 HP), IN 62A - Braked motors - Spindle drive via universal joints Nodpsx Dx Acofx Abbjcl Motor for height adjustment: 0.37 kW - Axial spindle adjustment: Lower horizontal spindle: 0 to 15 mm Upper horizontal spindle: 0 to 25 mm Vertical spindles: 0 to 25 mm - Permissible tool diameters: Lower horizontal spindle: Ø 120 to 140 mm Vertical spindles: Ø 100 to 180 mm Upper horizontal spindle: Ø 100 to 180 mm End milling cutter: Ø 140 x 12 x 40 mm - Recommended compressed air supply: 7 bar Operating pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G Operating manual and tools Year of manufacture: 2000 Price: 9500.-

Stanje: novo, - Stable steel/grey cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation due to precision components and high dead weight - Standard with forward/reverse rotation and electronic interlock during direction change - Five speeds from 3,000 to 10,000 rpm - Speed change is simple and convenient from the side of the machine - Standard with MK 4 interchangeable spindle system - Large worktable made of cast iron for sustained precision - Easy handling via controls and speed display on the front of the machine - Large-dimensioned milling fence with fine adjustment and aluminum fence jaws as standard - Fence adjustment via hand crank - Numerical display of the set spindle height, accurate to a tenth of a millimeter - High-performance industrial motors Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 PO Box 168 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Weight (net) approx.: 510 kg Extraction connection: - Number of extraction ports: 2 - Extraction port diameter: 80 mm - Number of fence extraction ports: 1 - Fence extraction port diameter: 120 mm Worktable: - Worktable length: 2,500 mm - Worktable width: 810 mm - Table height: 923 mm Installation information: - Explanation of required space: Dimensions reflect maximum travel or useable lengths. - Working area length: 3,700 mm - Working area width/depth: 5,000 mm - Working area explanation: Please add the given measurements to the required space to achieve the recommended available footprint for the machine. Equipment: - Milling fence: heavy-duty professional model with aluminum fence jaws and fine adjustment, adjustment from the front via hand crank with digital numeric display - Curved milling safety hood - Manual spindle height adjustment - Manual spindle tilt adjustment - Controls: manual height and tilt adjustment of the milling unit - Control position: on the machine body - Table design: table extensions left and right and pull-out workpiece support (total width 2,500 mm) Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW Spindle: - Spindle tilt: -45° to +45° - Usable spindle length: 140 / 180 mm - Usable spindle length explanation: for spindle Ø 30 – 35 / for spindle Ø 40 – 50 mm Nodpfsu T Hhkox Abbocl - Spindle travel: 90 mm - Interchangeable spindle: MK 4 - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm Max. milling tool diameter: - Max. retractable tool diameter: 320 x 60 mm - Max. tool diameter for profile milling: 250 mm - Max. tool diameter for tenoning: 350 mm - Max. tool diameter for contour milling: 160 mm

Stanje: novo, - Motorized thickness table adjustment with two speeds - Digital display for working height - Thickness table made of cast iron - Thickness table mounted on four large trapezoidal-thread spindles for maximum stability and precision - Four feed speeds - Optional with two rollers in the thickness table - Standard with noise and chip protection curtains at material infeed and outfeed - Adjustable pressure for feed rollers - Front infeed roller with helical toothing - Outfeed roller with rubber coating - Powerful industrial motor Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3 - PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product) approx.: 1305 mm - Width/depth (product) approx.: 1080 mm - Weight (net) approx.: 750 kg Extraction Connection: - Extraction port diameter, thickness: 150 mm Installation Information: - Required length: 1305 mm - Required width/depth: 1080 mm - Required height: 1197 mm - Note on required space: Dimensions account for maximum travel or usable lengths. - Machine body length: 1305 mm - Machine body width/depth: 725 mm - Working area length: 1000 mm Ncjdpju T Hq Esfx Abbel - Working area width/depth: 2000 mm - Note on working area: Please add these dimensions to the required space to determine the recommended free installation area for the machine. Thickness Table: - Thickness table length: 630 mm - Thickness table width: 1000 mm - Working height thickness min.: 3.5 mm - Working height thickness max.: 300 mm - Working length thickness min.: 210 mm - Chip removal max. thickness: 8 mm Electrical Data: - Motor power: 9 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 pcs - Cutterblock speed: 4500 rpm - Planing width max.: 630 mm Feed: - Feed speed: 5/8/12/18 m/min

Stanje: novo, - Large jointer tables made from grey cast iron - The adjustment of the jointer tables is performed via a precise parallelogram system, ensuring that the distance between the table edges and the cutterhead remains constant in every position - The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° - The fence tilt angle can be read directly from the operator’s position - Supplied as standard with auxiliary fence - Large four-knife cutterhead, precision-mounted - Smooth operation due to precision unit and heavy cast design - Powerful industrial motor - Maximum user safety with simple operation - Chip removal indicator via scale - Manual table adjustment - Motor protection switch Equipment Details - Including fold-down auxiliary fence for narrow workpieces - Manual quick adjustment of chip removal with scale and locking knob Guard Device - The guard device is foldable and designed so that the operator is not hindered during work yet remains protected TERSAs models with Tersa planer cutterhead system - No adjustment or screwing required - Planer knife change in seconds - Self-locking - Exceptionally low noise - Perfect planing results Manufacturer SCM Group S.p.A. Via del Lavoro 1/3-Po box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (product) approx.: 2750 mm - Width/Depth (product) approx.: 1500 mm - Weight (net) approx.: 680 kg Jointer: - Total table length: 2720 mm - Infeed table length: 1498 mm - Max. chip removal, jointer: 8 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilting range: 90 – 45 ° Extraction Connection: - Extraction port diameter, thicknesser: 120 mm Setup Information: - Required length: 2750 mm - Required width/depth: 1604 mm - Explanation of required space: The dimensions take into account maximum travel or working lengths. Electrical Data: Nsdpfx Abou T Hrcobscl - Drive motor power: 7 kW - Connection voltage: 400 V - Network frequency: 50 Hz Cutterhead: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 pcs - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm

Stanje: rabljeno, Leto izdelave: 2002, številka stroja/vozila: MR006281, Rabljeni namizni rezkalni stroj v dobrem stanju, opremljen s podajalnikom, takoj pripravljen za uporabo. Cena iz Staphorsta Ncodpfxjx Tt N Ee Abbel Tehnične specifikacije: - Nagibno rezkalno vreteno: Ne - Premer vretena: 40 mm - Serijska številka: KK000101

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Skupna moč 14 kW Nsdsx Hdtnopfx Abbocl Prva kalibrirna enota s kovinskim valjem Druga kombinirana enota z gumiranim valjem Delovna širina 950 mm Dve hitrosti pomika traku Električna nastavitev višine mize Čevljev z nastavitvijo časa delovanja Oscilacija s fotocelicami CE oznaka Leto proizvodnje 2007

Stanje: zelo dobro (rabljeno), Štiristranski skobeljni stroj Casadei C4 Ncedexxiw Tspfx Abbel Delovna širina: 220 mm Delovna višina: 120 mm Število vreten: 4 Razporeditev vreten: 1. Spodaj 2. Desno 3. Levo 4. Zgoraj Obratovalna hitrost vreten: 6000 obr/min Premer vretena: 40 mm Dve hitrost posuva: 6–12 m/min Velikost orodja: 125–140 mm Podajalni pogon na kardansko gred Tehnična dokumentacija

Stanje: rabljeno, Leto izdelave: 2020, Delovna širina 1100 mm Širina trakov 1115 mm Obseg trakov 1900 mm Ncodpfxex A D Ars Abbol Delovna višina min/max 4/170 mm Jekleni vhodni valj – gumirani valj – jekleni izhodni valj Zaključna sani Sonda za plošče Glavna moč motorja 11 kW – 15 KM Moč pogonskega motorja 0,4 kW – 0,7 KM Dve pogonski hitrosti 4,5/9 m/min Napetost 380 V

Stanje: novo, Leto izdelave: 2024, Working width: 950 mm Ncedpfx Aboknyhlobjl Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Height adjustment: electronic Workpiece thickness display: digital Control unit: Fox 500 KTR Units: 1 1st unit: Combination unit for calibrating and sanding / Helically grooved steel roller Ø 120 mm with fine height adjustment / Hard sanding pad with graphite backing Dust removal brush: no Motor power: 7.5 kW Extraction connection: 140 mm Machine length: 1388 mm Machine width: 1545 mm Machine height: 1668 mm Weight: 660 kg

Stanje: novo, Leto izdelave: 2023, Working width: 1100 mm Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Height adjustment: electronic Workpiece thickness display: digital Sanding heads: 2 1st unit: Helical-grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off control of the roller 2nd unit: Combination unit with fine-adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding pad with graphite lining on replaceable insert, and pneumatic on/off control of the roller Segmented sanding pad: elastic, segment spacing 56 Control: FOX 500 KTR Dust removal brush: no Motor power: 15 kW Dust extraction port: 2 x 140 mm Machine length: 1650 mm Machine width: 1820 mm Machine height: 1960 mm Weight: 1170 kg Nsdpfxoirmg Uo Abbocl

Stanje: novo, Leto izdelave: 2021, New machine Year of Manufacture: 2021 Features and Technical Data: Dimensions and Weights Length (Product) approx. 1170 mm Net Weight approx. 660 kg Width/Depth (Product) approx. 1003 mm Dust Extraction Connection Extraction port diameter (thicknessing) 150 mm Installation Information Required space length: 1170 mm Machine body width/depth: 705 mm Required space width/depth: 1003 mm Working area length: 1000 mm Required space height: 1197 mm Working area width/depth: 2000 mm Explanation of required space: The dimensions take into account the maximum travel distances or note regarding working area. Please add the specified dimensions to the required space to determine the recommended unobstructed area for installation. Machine body length: 1170 mm Ncedpjkwg Unjfx Abbol Thicknessing Details Thickness table length: 520 mm Max. working height (thicknessing): 250 mm Thickness table width: 1000 mm Min. working length (thicknessing): 210 mm Min. working height (thicknessing): 3.5 mm Max. cutting depth (thicknessing): 8 mm Electrical Data Drive motor output: 7.5 kW Mains frequency: 50 Hz Connection voltage: 400 V Cutterhead type: TERSA Cutterhead speed: 4500 rpm Cutterhead diameter: 120 mm Max. planing width: 520 mm Number of planer knives: 4 pcs. Feed speed: 5/8/12/18 m/min Location: Flörsheim Availability: Short notice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical parameters specified in the manual, on workpieces made of: plastic, PVC, ABS, methacrylate, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical worktable allows for easy loading and unloading of processed parts and minimises the maximum dimensions of the machine to the essential minimum. Tool changing using a 10-position side-mounted tool magazine enables a wide range of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Ncedpfxsmzbr Sj Abbsl Z = 20 mm Rapid traverse speed (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp – ER32 Drilling head unit T3: Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Stanje: dober (rabljeno), Koda: 0441 Znamka: CASADEI Model: SYNCRO Štiri-stranski skobelni stroj z 4 vreteni za les, okenske okvirje, pohištvo, vrtno pohištvo, žage in različno rabo Ncsdou Tqm Rjpfx Abbjl Tehnični podatki: - Enodelno jekleno ohišje - Min./maks. delovna širina: 20/180 mm - Min./maks. delovna višina: 6/105 mm - Dolžina dovodne mize: 2000 mm - Nastavitev dovodne mize in vodila: 10 mm - Premer vretena: 35 mm - Hitrost podajanja: 6/12 m/min - Premer utornega rezkarja: 120 mm - Dvig podajalnega sistema na motorni pogon Sestava: 1. Vreteno skobeljni stroj – motor 10 KM – dimenzije 190 x 100 mm, Z3 2. Desno vreteno rezkalni stroj – motor 7,5 KM – dimenzije 120 x 100 mm, Z3 3. Levo vreteno rezkalni stroj – dimenzije 120 x 100 mm, Z3 4. Vreteno debelinski skobeljni stroj – motor 10 KM – dimenzije 190 x 100 mm, Z3 - Premer odsesovalnih priključkov: 120 mm - 4 skobeljne glave - Skupne dimenzije: 3000 x 1160 x 1555 mm (V) - Teža: 900 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Automatic edgebander for pre-glued edges Njdpfxowfw A He Abbecl