Oblikovalec površin CASADEI PF 52 TERSA Holzkraft CASADEI

CASADEI Abrichthobel PF 52 TERSA Holzkraft

Stanje: novo, Technical data: Lhodpfxogtm U Ao Adlog Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Stanje: dober (rabljeno), Koda: 0299 Znamka: SCM Model: S 630/E - CE standard Avtomatski debelinski skobeljni stroj za mizarske delavnice, izdelavo pohištva po meri, lesena okenska okna, lesno mizarstvo, žage, plastiko, kompozitne materiale in razne druge namene - CE standard Tehnični podatki: Elektronska nastavitev višine mize Pnevmatska nastavitev pritiska valjev Pogonski sistem s 3 velikimi motoriziranimi zgornjimi valji - enostavno zamenljivi Elektronski variator hitrosti podajanja 4/20 m/min Dimenzije delovne mize: 630 x 1000 mm Maksimalna delovna širina: 630 mm Minimalna/maksimalna delovna višina: 3/300 mm Minimalna delovna dolžina: 260 mm Lhedpfxsyi E T Tj Adleg Število nožev: 4 Motor: 7,5 KM Motor podajanja: 2 KM Premer sesalne cevi: 150 mm Skupne dimenzije (mm): 1360 x 1080 x 1220 (v) Teža: 1000 kg

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Lsdsrigxyepfx Adlehg Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Lhodpfx Asdqzcxodljg Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2026, A550 Vollautomatische Massivholzsäge 9 m Vollautomatisches Schneiden von mittelgroßem bis großem Vollholz mit benutzerfreundlicher Automatisierung. Legen Sie irgendein Holzstück ab und die Maschine erkennt es automatisch und schneidet es mit hochpräziser Servomotor-Materialpositionierung entsprechend den eingegebenen Zuschnittsaufträgen. Import von Excel-Auftragslisten über WLAN für effiziente Übernahme großer Schneidlisten. Ihre vollautomatische Säge kann optional als Inline-Optimierungssäge geliefert werden. Jedes aufgelegte Holzstück, ungeachtet der Länge, wird von einem Lasersensor vermessen. Unser leistungsfähiger Optimierungsalgorithmus verarbeitet Ihre Zuschnittliste und kalkuliert den optimalen Abschnittsplan, sodass der Verschnitt minimiert wird. Dieser Vorgang erfolgt in Echtzeit während des Maschinenbetriebs, ohne dass ein Eingriff Ihrerseits erforderlich ist. Ausstattung: • Vollautomatischer Schneidbetrieb mit Stangen-/Riegelzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für den vollautomatischen Betrieb, Auftrag eingeben und in Sekunden schneiden Lhedpfx Aef Ekngedljg • Komfortables Schneiden von Einzelteilen, Serien oder umfangreichen Excel-Listen • Bündel-/Mehrfachstangen-Schnitt und automatische Zählfunktion • Remote-Eingabe von Excel-Auftragslisten per WLAN mit umfassenden Datenzuordnungsmöglichkeiten • Vollständig einstellbare Schnitt- und Vorschubgeschwindigkeiten für maximale Produktivität • Automatischer Etikettendruck für Teile basierend auf den Auftragsdaten (manuelle Etikettenanbringung, optional) • Direktdruck auf das Material während des Durchlaufs ohne Bedienereingriff (optional) • Barcode- oder QR-Code-Druck/-Scan für Auftragsdatenerfassung (optional) • Automatisierte Servo-Einstellung des Sägegehrungswinkels bis ±75° (optional) Ideal geeignet für: • Rahmen- und Fachwerkproduktion • Fertigung von Gartenhäusern/Holzhütten • Möbelherstellung • Gehrungs-Holzkonstruktionen • Serienmäßiger Zuschnitt großer Holzvolumina Modell: A550 Schnittlänge: 9 m Materiallänge: 8.580 mm Schubkraft: 20–40 kg Software: Optimierer HOCHWERTIGE, IN AUSTRALIEN HERGESTELLTE MASCHINEN.

Stanje: novo, Tubend aluminium circular saw / under-table saw AC 550 Special equipment included in the price: - Pneumatic vertical and horizontal clamping via 4 clamping jaws - Infinitely variable saw blade feed - Minimum quantity lubrication system - 3m roller conveyor Lhodpjkckx Uofx Adljg Description: Saw blade diameter: 550 x 32 x 4 mm Speed: 3580 rpm Cutting capacity at 90° (rectangular): 260 x 200 mm Cutting capacity at 90° (square): 155 x 155 mm Cutting capacity at 45° (rectangular): 180 x 200 mm Cutting capacity at 45° (square): 130 x 130 mm Operating pressure: 6 – 8 bar Operating voltage: 380 V Total power requirement: 3 kW Machine weight: approx. 250 kg

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Ljdpfsi Dfidjx Adlehg Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Lsdpfx Ashp Rcrjdlehg Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Ljdsdqzh Rjpfx Adlshg Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 3.200 mm, premer orodja: 400 mm, premer vretena: 50 mm, pomik vretena: 640 mm, največja hitrost vretena: 3.000 obr/min, dolžina vretena za rezkanje: 320 mm, premer žaginega lista: 400 mm, vrsta nastavitve višine: električni, vrsta vhodnega toka: Klimatska naprava, delovna višina: 130 mm, delovna širina: 200 mm, SCM Windor 60/100 – Angular Processing Centre Manufacturer: SCM Group Year of manufacture: 2005* 1. General Plant Description This production line is a window and door manufacturing line of the type Windor 60/100 by SCM Group, year of manufacture 2005. It is a CNC-controlled angular processing centre designed for industrial machining of frame and sash components. The system is engineered for series production, enabling precise and reproducible machining through integrated process steps. 2. Main Components of the System 2.1 Angular Processing Centre SCM Windor 60/100 The SCM Windor 60/100 features a modular design and is constructed as an angular system. Machining takes place on a tenoning side and a profiling side arranged at right angles to one another. The plant combines multiple operations such as milling, drilling, grooving, rebating, and tenoning in a continuous CNC-controlled process. Key Features: * CNC multi-side machining * Multiple milling and processing spindles * Automated tool guidance and changeover * High dimensional accuracy and repeatability 2.2 Fleximat Drilling Centre The Fleximat drilling centre is integrated into the system and serves for the precise drilling of joints and hardware fittings. Machining is CNC-controlled with vertical and horizontal drilling units. 2.3 Profiler Centre The profiler centre is designed for profile milling operations, consisting of two processing sides: Right Side: * Lifting spindle with height adjustment Lodpox Nqqxefx Adlehg * For variable profile and contour processing Left Side: * 24-position tool changer * Automatic tool change to minimise setup times * Suitable for complex profile milling tasks 2.4 Löwer Surface Sander A surface sanding machine from Löwer is integrated into the production line. The machine is used exclusively for surface sanding and improves the surface quality of the machined components. 3. Control, Operation, and Safety The plant is equipped with a CNC control system, which manages all machining sequences, tool changes, as well as feed and spindle movements. Operation is semi- or fully-automated by trained specialist personnel. The safety features correspond to the state of the art at the time of installation (year 2005) and include in particular: * Mechanical safety guards and enclosures * Emergency stop devices * Safety interlocks on moving machine parts 4. Optional Expansion: SCM Topset XL Planer (10-spindle) For expansion of the existing machinery, installation of a 10-spindle SCM Topset XL planer is intended. The machine will be operated as a stand-alone processing station at a separate location within the production hall and will not be directly connected to the CNC control of the Windor system. The system is available and can be dismantled at any time. Dismantling and transport are to be organised by the buyer. Available from: 07/01/2026