širokopasovni brusilnik

Casadei LIBRA

Stanje: novo, Leto izdelave: 2026, CASADEI Libra 35 – Wide Belt Sander, Dual-Belt Version Immediately Available – Ex stock 54634 Bitburg Technical Data: Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Sanding belt width: 1115 mm Sanding belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table height adjustment motor: 0.25 kW Drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Illustration with optional equipment. Wide belt sander in dual-belt configuration for up to 1100 mm working width, with numerous equipment options for cost-conscious craftsmen and workshops. Robust mono-block steel machine frame, reinforced with tubular supports and high-mounted working units for maximum rigidity User-friendly operation thanks to clearly arranged control panel at the front Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air demand Automatic star-delta start for main motor Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Hsdpfxscr S Ecs Adkoni Feed belt drive via geared motor with two speeds Flexible steel pressure bar before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with fine adjustment capability for the grit/belt thickness Quality – Made in Europe Version RTC: 1st unit: diagonally grooved steel roller Ø 120 mm, with fine adjustment for calibration 2nd unit: combination unit with fine adjustable working height for calibration and fine sanding; rubber-coated roller Ø 120 mm (45 Shore), and hard sanding pad with graphite plate on replaceable insert Scope of delivery: Working table height adjustment with electronic display of working height Oscillation of sanding belts via electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-backflow device (C.E.) Star-delta starting of main motors Grooved calibration steel roller Selector switch for sanding pad positioning from control panel Optional accessories: – Semi-hard flat sanding pad – Automatic belt centering system Location: Ex stock Bitburg – at a special price

Stanje: dober (rabljeno), Leto izdelave: 2000, Swing diameter: 340 mm Turning length: 2000 mm Control: FAGOR 8055 Swing over bed: 550 mm Spindle bore: 108 mm Spindle speeds – stepless: 2500 rpm Drive power: 16.5 kW Quill stroke: 220 mm Quill diameter: 100 mm Total power requirement: 19 kW Machine weight approx.: 4,300 kg Space requirement approx.: 4,300 x 1,600 x 1,800 mm This EMCO E 300x2000 cycle lathe is offered complete with all accessories. Description: - Coolant system - 1 open steady rest 20-145mm Hnjdpfxjvwgpbo Adkji - 1 closed steady rest 15-185mm - 1 face plate - 1 three-jaw chuck - 1 wedge bar chuck D=400mm - Parat 4-position tool holder - Assorted tool holders

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Hnedpfx Adjgf Sw Nekei Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: rabljeno, Leto izdelave: 2020, Delovna širina 1100 mm Širina trakov 1115 mm Obseg trakov 1900 mm Delovna višina min/max 4/170 mm Jekleni vhodni valj – gumirani valj – jekleni izhodni valj Zaključna sani Sonda za plošče Glavna moč motorja 11 kW – 15 KM Moč pogonskega motorja 0,4 kW – 0,7 KM Dve pogonski hitrosti 4,5/9 m/min Napetost 380 V Hjdpfsx A D Arjx Adksni

Stanje: rabljeno, POSREDNIŠKI STROJ – ZASEBNA PRODAJA Hnedpfx Adeymxxdjkji Naprodaj je trojna kombinirana naprava Emco Rex 2000. Tehnični podatki: - Širina skobljanja: 260 mm - Rezkalni stroj - Nosilec za vzdolžno vrtanje Za vprašanja se obrnite neposredno na prodajalca: G. Florian Gerbenjak Lokacija stroja – 5422 Bad Dürrnberg

Stanje: novo, Leto izdelave: 2024, Working width: 950 mm Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Height adjustment: electronic Workpiece thickness display: digital Control unit: Fox 500 KTR Units: 1 1st unit: Combination unit for calibrating and sanding / Helically grooved steel roller Ø 120 mm with fine height adjustment / Hard sanding pad with graphite backing Dust removal brush: no Motor power: 7.5 kW Hnjdpfoknyhljx Adkoi Extraction connection: 140 mm Machine length: 1388 mm Machine width: 1545 mm Machine height: 1668 mm Weight: 660 kg

Stanje: novo, Leto izdelave: 2023, Working width: 1100 mm Hjdpfx Adoirmg Uskjni Minimum workpiece height: 4 mm Maximum workpiece height: 170 mm Height adjustment: electronic Workpiece thickness display: digital Sanding heads: 2 1st unit: Helical-grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off control of the roller 2nd unit: Combination unit with fine-adjustable working height for calibration and fine sanding: rubber-coated roller Ø 120 mm (45 Sh), hard sanding pad with graphite lining on replaceable insert, and pneumatic on/off control of the roller Segmented sanding pad: elastic, segment spacing 56 Control: FOX 500 KTR Dust removal brush: no Motor power: 15 kW Dust extraction port: 2 x 140 mm Machine length: 1650 mm Machine width: 1820 mm Machine height: 1960 mm Weight: 1170 kg

Stanje: novo, Leto izdelave: 2022, I am selling a new wide belt sander Casadei Libra 45 RTC 110, year of manufacture 2022. Configuration: - Planing cylinder with spiral knives - Combination unit: hard rubber cylinder + pneumatic segmented pad with jump-in function - Working width: 1100 mm Hodpsrddh Isfx Adkeni - Electronic height adjustment with digital readout: 3–160 mm - 1 main motor - 2 feed speeds - Programmable jump-in / jump-out for the pad - Sensitive adjustment of the pad position - Sensitive adjustment of the cylinder position - Pneumatic adjustment of pad and cylinder pressure - Pressure rollers for short workpieces - Air-blow sanding belt cleaning unit Condition: NEW! The machine has never been used. Available immediately. Includes full documentation and CE certificate.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AB00021322, skupna širina: 1.820 mm, skupna višina: 1.960 mm, skupna dolžina: 1.650 mm, delovna širina: 1.100 mm, skupna masa: 1.160 kg, moč: 11 kW (14,96 KM), dolžina brusnega traku: 1.900 mm, višina obdelovanca (maks.): 170 mm, širina brusilnega traku: 1.115 mm, vhodna napetost: 400 V, - The calibration and fine sanding machine LIBRA 35 is an extremely versatile and multi-purpose machine. - Robust, tube-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. - Operator-friendly thanks to a clearly arranged control panel on the front side. - Motorized table height adjustment. - Digital display for working height. - Electronically controlled sanding belt oscillation with reduced compressed air requirement. - Automatic star-delta start for the main motor. - Natural rubber feed belt with negative profile. Hnsdpfxowwkuyo Adkji - Support table with two rollers at the infeed and outfeed of the feed belt. - Feed belt drive by gear motor with two speeds. - Flexible steel pressure rail in front of the first unit. - Rubber pressure rollers in front of and behind each working unit. - Pneumatic belt tensioning for each unit, with decimal adjustment option for grit/belt thickness.

Stanje: novo, Leto izdelave: 2022, številka stroja/vozila: MR004406, Wide belt sander with a maximum working width of 950 mm. The maximum working height of this machine is 170 mm. The price is ready for use, supplied with power cable, and the machine is equipped with the following options: - Machine compliant with CE regulations - Activation of calibration roller via switch on control panel - Activation of sanding pad via switch on control panel - Automatic table positioning with thickness sensor Hnjdol Dxgyspfx Adkji - Automatic centering feed belt Technical specifications: - Number of sanding units: 1 - Sanding unit 1 type: Combination calibration sanding shoe - Maximum sanding width: 950 mm - Maximum working height: 170 mm - Minimum working height: 4 mm - Feed speed: 4.5/9 m/min - Sanding belt length: 1,525 mm - Sanding belt width: 970 mm - Motor power: 10 HP - Serial number: AB00024845