Brusilnik s širokim pasom

Casadei LIBRA 35/2 RTC 110

Stanje: novo, Leto izdelave: 2026, CASADEI Libra 35 – Wide Belt Sander, Dual-Belt Version Immediately Available – Ex stock 54634 Bitburg Technical Data: Sanding width: 1100 mm Min. / max. working height: 4 / 170 mm Ndjdpfocr S Ecox Ac Hjb Sanding belt width: 1115 mm Sanding belt length: 1900 mm Feed speeds: 4.5 / 9 m/min Feed motor: 0.33 / 0.55 kW Table height adjustment motor: 0.25 kW Drive motor power: 11 kW Electrical voltage: 400 V Phase(s): 3 Ph Mains frequency: 50 Hz Length: 1650 mm Width/depth: 1820 mm Height: 1960 mm Illustration with optional equipment. Wide belt sander in dual-belt configuration for up to 1100 mm working width, with numerous equipment options for cost-conscious craftsmen and workshops. Robust mono-block steel machine frame, reinforced with tubular supports and high-mounted working units for maximum rigidity User-friendly operation thanks to clearly arranged control panel at the front Motorized table height adjustment Digital display for working height Electronically controlled sanding belt oscillation with reduced compressed air demand Automatic star-delta start for main motor Natural rubber feed belt with negative profile Support table with two rollers at infeed and outfeed of the feed belt Feed belt drive via geared motor with two speeds Flexible steel pressure bar before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with fine adjustment capability for the grit/belt thickness Quality – Made in Europe Version RTC: 1st unit: diagonally grooved steel roller Ø 120 mm, with fine adjustment for calibration 2nd unit: combination unit with fine adjustable working height for calibration and fine sanding; rubber-coated roller Ø 120 mm (45 Shore), and hard sanding pad with graphite plate on replaceable insert Scope of delivery: Working table height adjustment with electronic display of working height Oscillation of sanding belts via electronic system Rubber-coated grooved pressure roller at infeed, 1st position, with anti-backflow device (C.E.) Star-delta starting of main motors Grooved calibration steel roller Selector switch for sanding pad positioning from control panel Optional accessories: – Semi-hard flat sanding pad – Automatic belt centering system Location: Ex stock Bitburg – at a special price

Stanje: rabljeno, številka stroja/vozila: 007984, Maks. obdelovalna širina: 1300 mm Min. obdelovalna debelina: 4 mm Delovna miza: fiksna višina Ndedpjwqdbmofx Ac Hjb Podtlak preproga: da Število delovnih agregatov: 4 kos

Stanje: novo, Tip: 1300-2S Ndedpfx Acem Dr Rgs Hob Delovna širina: 1300 mm Minimalna delovna dolžina: 400 mm Delovna debelina: 2–80 mm Hitrost brusnega valja – s frekvenčno regulacijo Hitrost podajanja: 5–20 m/min Skupna moč motorjev: 6,27 kW Transportne dimenzije: 1700 x 2100 x 1400 mm Teža: 1200 kg Cena: 6.100 EUR (EXW Jonava, Litva)

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 MACHINESEEKER ENQUIRIES: Please note that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Specification and technical data: The Master delivers precision sanding. It encapsulates the essence of our 75 years’ experience in sanding technology. This means it comes equipped "out of the box" with all the features essential for fast, reliable production of perfect surfaces—nothing more, nothing less. The core model Kündig Master is fitted with a calibration roller and a sanding pad unit, based on a proven design that guarantees long-term maintenance of high sanding precision—even across its generous working width of 1350 mm. In addition, a control unit is integrated for fast and intuitive operation. Sanding units – Proven combination The sanding system relies on a tried-and-tested combination of calibration roller and sanding pad. For optimal workpiece guidance, a parallel-sprung steel pressure roller is fitted at the machine infeed, with rubber pressure rollers placed between the sanding units. Ndjdpfx Acew Naano Hjb Calibration Unit (R): The calibration unit consists of a grooved rubber contact roller of proven hardness. It is ideal for calibration tasks, even for higher material removal rates if required. The contact roller level is infinitely adjustable to compensate for the thickness of the inserted abrasive grain. Segmented sanding pad (E): Equipped with the E-Plus configuration, the fine sanding unit features—not pneumatically, but—an electronically controlled, segmented sanding pad with a scanning width of 35 mm. This enables even more precise fine sanding at the edges of workpieces. The edge pressure of the sanding segments is automatically regulated, but can also be precisely adjusted via the touchscreen to further refine the finish around the workpiece edges. Changing the graphite glide belt is also quick and easy. Equipment – At a glance Construction: In terms of robustness and durability, the Master is on par with our other model ranges. It benefits from the same solid construction that makes all of our machines long-term investments, and is designed to deliver precise sanding results for many years. Upper section adjustment: For over thirty years, we have equipped our machines exclusively with upper section adjustment. Why? Although it is more complex to engineer than table adjustment, it offers numerous advantages: Greater permissible workpiece weights, better long-term precision, and the consistent working height. Workpiece dimensions: Adjustment of the upper section (clearance opening) is motorized and finely regulated via touchscreen. The maximum clearance height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, well-established standard dimension.

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Ndedpfx Acjg A D Anj Hjb Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Stanje: zelo dobro (rabljeno), RABLJEN STROJ - V380/50 - "CE" Koda: CAL-052 _ _ _ Delovna širina: 1100 mm Ndedpexp Ecyofx Ac Hob 1. skupina: jekleni valj 2. skupina: gumijasti valj 3. kombinirana skupina: valj/blazinica Moč motorjev: 2 x 15 kW

Stanje: novo, Load capacity 500 kg. Number of suction cups: 6 units Diameter of suction cups: 215 mm Suction capacity: 8.0 m³/h Crane eye diameter: 80.0 mm Voltage: 400 V Total power requirement: 0.18 kW Machine weight: approx. 120 kg Space requirements: approx. 2400 x 1100 x 584 mm Equipment: - For horizontal transport of smooth, dry, and airtight panels - Robust steel load-bearing frame - Painted in RAL 2000, featuring a low dead weight - Galvanized longitudinal beam, length 2,400 mm - 3x galvanized crossbeams, each 1,000 mm long - 6x spring-loaded, articulated, and adjustable suction cup holders - 6x suction pads Ø 215 mm - Low-maintenance, high-quality, dry-running rotary vane vacuum pump - With a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3-phase 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Telescopic operating handle, extendable up to 1,000 mm from beam center - Sturdy sheet metal holder for your crane control - "Suction / Release" operation via manual slide valve - Control and safety device for vacuum lifter * Robust control cabinet * Contactor control circuit for the vacuum pump * Safety warning system with acoustic sounder * Vacuum gauge with danger zone indicator * Large vacuum reservoir with safety check valve * Two-step operation for load release Njdjxak Ddopfx Ac Hedb - Fine dust filter for vacuum pump protection - Documentation * Special accessories included: - 6x ball valves for isolating individual suction cups * Enables handling of smaller formats without the need to move suction cups or crossbeams - Small spiral connection cable * Extension length up to 3,500 mm, designed as * Extension cable with CEE plug and coupling * Routed alongside the load chain to the lifting device

Stanje: novo, Leto izdelave: 2024, Delovna širina: 600 mm Delovna višina: 5 mm do 300 mm Minimalna dolžina obdelovanca: 250 mm Agregati: 2 1. Žagalni agregat Random System: izgled žagalnega reza 2. Krtača: Tynex, premer 210 mm Nastavitev višine: električna Nodeupy Spopfx Ac Hodb Prikaz višine: digitalni Podajalna hitrost: 4 - 14 m/min Moč motorja žagalnega agregata: 1,1 kW Moč motorja krtače: 4 kW Moč motorja podajanja: 0,37 kW Dolžina stroja: 1400 mm Širina stroja: 1500 mm Višina stroja: 1600 mm Teža: 700 kg

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Nedpfxogf Sw Nj Ac Hsdb Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: dober (rabljeno), Leto izdelave: 2000, Schroeder Mosaic Press 160 mm. Bonding patterns – brick/bond (English pattern) panel 640x274 mm and halves 640x137 mm, bonded in 6 variants: - single brick, offset 50% - double brick, offset 50% Nedpjr Iyvbjfx Ac Hjdb - triple brick, offset 50% - single brick, offset 25% - double brick, offset 25% - triple brick, offset 25%