Casadei Fs 51 nakup rabljenega (88)

Stanje: rabljeno, Leto izdelave: 1991, rabljeno Hodpew U Emdefx Ah Dsnu Proizvajalec Casadei Tip FS 51 Leto izdelave 1991 Št. stroja H 5884 Motor 4 kW Širina skobljanja cca 510 mm Višina skobljanja cca 230 mm Dolžina mize cca 2200 mm Izravnalne mize – popolne, dvižne Mizne letve z režami Mizne letve, tiho delovanje Motorska avtomatska zavora Število nožev 4 kosi Varnostna nožna gred Mizni vodilni valj 1x Podajanje 8 + 14 m/min. Digitalni prikaz višine skobljanja Električna nastavitev višine Priključek za odsesavanje D 140 mm Potreben prostor cca 2200 mm x 1300 mm x 1000 mm Teža cca 900 kg Skladišče 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v videnem stanju, brez garancije in jamstva.

Stanje: rabljeno, Leto izdelave: 2003, Delovna širina: 510 mm Skobeljniški valj: segmentni nož Število nožev: 4 Dolžina poravnalne mize: 2000 mm Nastavljiv kot poravnalnega vodila: da Ročno dviganje poravnalnih miz: ročno Največja debelina prehoda na debelinski skobelnik: 230 mm Električna nastavitev višine debelinske mize Prikaz debeline oblanja: digitalni prikazovalnik Podajalna hitrost: 7 / 14 m/min Vlečni valj: jeklo Izvlečni valj: jeklo Pritisna letva: neprekinjena Mizni valjčki: da Hjdpexgn N Refx Ah Djnu Moč motorja: 5,5 kW Motorna zavora: da Sesalni priklop: 160 mm Dolžina stroja: 2200 mm Širina stroja: 950 mm Teža: 800

Stanje: rabljeno, Leto izdelave: 1989, - Motor 3 kW - TERSA nožna gred - Pomožni prislon - Prilagoditvena letvica Hedsw I A Uropfx Ah Djnu

Stanje: novo, With a 520 mm planing width, motorized thickness table adjustment, and convenient switching - Robust steel and cast iron construction - Large, ribbed surfacing tables made from cast iron - Smooth running operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Sectional pressure bar at infeed - Precision bearing four-knife cutterhead - Helical-toothed steel infeed roller for especially uniform and gentle wood feed - Outfeed roller with rubber coating - Large surfacing fence, tiltable from 90 to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-changeover system with pneumatic lifting and lowering of the surfacing table - Extraction connection remains in the same position for both surface and thickness planing—no need for additional hoses or awkward switching/routing around the machine Scope of delivery: Technical Data: Dimensions and Weights: Length (product): approx. 2300 mm Width/Depth (product): approx. 1100 mm Weight (net): approx. 980 kg _____ Surfacing: Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. depth of cut, surfacing: 6 mm Surfacing fence length: 1200 mm Surfacing fence height: 190 mm Fence tilt range: 90 – 45° _____ Extraction Connection: Extraction port diameter (thicknesser): 120 mm _____ Installation Information: Space requirement length: 2300 mm Space requirement width/depth: 1610 mm Space requirement note: The dimensions account for maximum movement or workpiece length. Machine body length: 1235 mm Machine body width/depth: 850 mm Working area length: 1000 mm Working area width/depth: 3500 mm Working area note: Please add these dimensions to the space requirement to get the recommended clearance for the machine. _____ Thicknessing: Min. working height (thickness): 3.5 mm Max. working height (thickness): 250 mm Max. depth of cut, thicknessing: 8 mm _____ Electrical Data: Motor power: 7 kW Supply voltage: 400 V Line frequency: 50 Hz _____ Hnodexnqyhepfx Ah Dsu Cutterhead: Cutterhead type: TERSA Cutterhead diameter: 120 mm Number of knives: 4 Cutterhead speed: 5000 rpm Max. planing width: 520 mm _____ Feed: Feed speed: 5/8/12/18 m/min

Stanje: novo, Leto izdelave: 2025, CASADEI PFS 520 – Surface and Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust steel and cast iron construction Large, ribbed surfacing tables made of cast iron, stress-relieved to prevent distortion Smooth operation due to high dead weight Four feed speeds Hnodpfxsbxz S Hs Ah Deu Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutterblock, precision mounted Helical gear steel infeed roller for particularly uniform and gentle feeding of wood Outfeed roller with rubber coating Large surfacing fence, tiltable from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa Cutterblock System: Planer knife change in seconds When starting the machine, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection sets itself automatically, no adjustments or screws required The surfacing table is adjusted using a stable and precise parallelogram system, ensuring that the distance between the table edges and the cutterblock remains constant in any position The sturdy aluminum surfacing fence is anodized as standard, easily adjustable and provides a generous support surface Adjustable tilt from 90° to 45° is easily readable from the operator's position Auxiliary fence included as standard for safe planing, even of narrow workpieces Image shows machine with optional equipment The extraction port position remains the same for both surfacing and thickness planing No additional extraction hose or complicated repositioning around the machine is necessary Technical data: Total length of surfacing tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Fence dimensions: 1200 x 190 mm Fence tilt range: 90° – 45° Min./Max. planing height: 3 / 250 mm Cutterblock diameter/number of knives: 100 mm / 4 pcs Feed speed: 5 / 8 / 12 / 18 m/min Spindle speed: 5000 rpm Motor power: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available

Stanje: novo, - Robust steel and grey cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high intrinsic weight - Four feed speeds - Motorized thickness table adjustment with two speeds and digital display - Segmented pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical-geared steel infeed roller for particularly even and gentle wood feed - Outfeed roller with rubber coating - Large jointer fence, tiltable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the jointer table - The dust extraction port position remains the same during both jointing and thicknessing operations, eliminating the need for additional hoses or laborious reconfiguration around the machine. Manufacturer SCM Group S.p.A. Via del Lavoro 1/3 - P.O. Box 168, 36016 Thiene-Vicenza, Italy Dimensions and Weights: - Length (Product) approx.: 2300 mm - Width/Depth (Product) approx.: 1100 mm - Weight (Net) approx.: 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Jointer table width: 520 mm - Working height: 930 mm - Max. cutting depth (jointer): 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilting range: 90° – 45° Extraction Connection: - Extraction outlet diameter (thicknesser): 120 mm Installation Information: - Required length: 2300 mm - Required width/depth: 1610 mm - Floor space details: Dimensions account for maximum travel or usable lengths. Hedpfxeu T Hq Sj Ah Donu - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Working area note: Please add these values to the space requirements to ensure the recommended free installation space for the machine. Thicknesser: - Thickness table width: 520 mm - Min. working height (thickness): 3.5 mm - Max. working height (thickness): 250 mm - Max. cutting depth (thickness): 8 mm Electrical Data: - Main motor power: 7 kW - Supply voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Casadei R 51 H3 debelinkar Širina oblanja: 510 mm Moč motorja: 5,5 kW Število nožev na valju: 4 kosi (rezalni noži) Valj na mizi: 1 kos Podajanje: 5-10-15-20 m/min Jekleni podajalni valj je v zelo dobrem stanju Ta stroj je del kompleta skupaj z ravnalno širinsko obličarko z delovno širino 510 mm. Dodatne informacije o tem stroju na zahtevo. Hnodpfxexg Elve Ah Dou

Stanje: novo, Leto izdelave: 2022, Working width: 520 mm Cutterhead: Tersa Number of knives: 4 Jointing table length: 2300 mm Hedeiuldyopfx Ah Denu Tiltable fence: yes Jointing tables lift: pneumatic Maximum planing thickness (thickness planer): 250 mm Thickness table height adjustment: electric Planing thickness display: digital Feed speed: 5/8/12/18 m/min Infeed roller: steel Outfeed roller: rubber Pressure beam: segmented Table rollers: no Motor power: 7 kW Motor brake: yes, automatic Extraction port: 160 mm Machine length: 2300 mm Machine width: 1100 mm Weight: 980 kg

Stanje: novo, Leto izdelave: 2023, New machine Year of manufacture: 2023 Approximate length: 2300 mm Approximate width/depth: 1100 mm Approximate weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Planer fence swivel range: 90 - 45° Hnsdpfxow I U Nus Ah Dou Extraction port diameter (thicknessing): 120 mm Main motor: 7 kW Required length (installation space): 2300 mm Required width/depth (installation space): 1610 mm Note on required space: The dimensions account for maximum travel paths or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Note on working area: Please add the specified dimensions to the installation space to calculate the recommended free area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phase(s): 3 Ph Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Maximum planing width: 520 mm Feed speed: 5/8/12/18 m/min Availability: short-term Location: Solingen

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, skupna širina: 1.010 mm, skupna višina: 1.110 mm, skupna dolžina: 1.200 mm, skupna masa: 643 kg, premer ekstrakcijske šobe: 150 mm, delovna širina: 510 mm, število rezil: 4, vrsta vhodnega toka: trifazni, Thickness Planer / Surface Planer CASADEI R51h3 Specification: • Condition: Used • Manufacturer: CASADEI • Model: R51h3 • Maximum working width: 510 mm • Maximum working height: 300 mm • Table length: 950 mm • Main motor power: 5.5 kW • Star-delta starter • Cutterhead with 4 TERSA system knives • One sliding roller in the lower table • Upper feed roller: spiral-type • One steel roller behind the cutterhead • Electric height adjustment (raise/lower) • Analog planing thickness gauge • Table supported on four screws • Cutterhead diameter: 120 mm • Cutterhead rotation speed: 5,000 rpm • 4 feed speeds • Extraction port diameter: 150 mm • Weight: approx. 643 kg • Year of manufacture: 2006 • Overall dimensions: 120 x 101 x 111 cm (W x L x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos presented show the actual item for sale Hodeu A U R Ijpfx Ah Djnu • Possibility to connect and test the machine on site • The auction price does not include VAT or transport costs

Stanje: zelo dobro (rabljeno), Leto izdelave: 1982, Roller width: 510 mm Max. height: 200 mm 2-knife spiral cutterhead Feed roller in the table Motor power: 5.5 kW Hnsdpfx Ahjicld Eo Deu

Stanje: dober (rabljeno), Koda: 0441 Znamka: CASADEI Model: SYNCRO Štiri-stranski skobelni stroj z 4 vreteni za les, okenske okvirje, pohištvo, vrtno pohištvo, žage in različno rabo Tehnični podatki: - Enodelno jekleno ohišje - Min./maks. delovna širina: 20/180 mm - Min./maks. delovna višina: 6/105 mm - Dolžina dovodne mize: 2000 mm - Nastavitev dovodne mize in vodila: 10 mm - Premer vretena: 35 mm - Hitrost podajanja: 6/12 m/min - Premer utornega rezkarja: 120 mm - Dvig podajalnega sistema na motorni pogon Hnsdpfx Aeu Tqm Roh Dou Sestava: 1. Vreteno skobeljni stroj – motor 10 KM – dimenzije 190 x 100 mm, Z3 2. Desno vreteno rezkalni stroj – motor 7,5 KM – dimenzije 120 x 100 mm, Z3 3. Levo vreteno rezkalni stroj – dimenzije 120 x 100 mm, Z3 4. Vreteno debelinski skobeljni stroj – motor 10 KM – dimenzije 190 x 100 mm, Z3 - Premer odsesovalnih priključkov: 120 mm - 4 skobeljne glave - Skupne dimenzije: 3000 x 1160 x 1555 mm (V) - Teža: 900 kg

Stanje: novo, Robust craftsmen's machine with a spindle moulder that can be tilted 45° to both sides and MK4 interchangeable spindle. - Stable steel/cast iron construction - Dynamically balanced milling unit anchored to the worktable - Particularly robust design - Smooth operation due to precision assemblies and high intrinsic weight - Standard features include forward/reverse rotation and electronic interlock during direction change - Five speeds from 3000 to 10000 rpm - Convenient speed change from the machine side - Standard with MK4 interchangeable spindle system - Large cast iron worktable for lasting precision - Easy operation via controls and speed display at the machine front - Large-dimensioned fence with fine adjustment and aluminium fence jaws as standard - Fence adjustment via hand crank, with digital numerical display - Numerical indicator for set spindle height, precise to 0.1 mm - High-performance industrial motors Scope of supply: Technical data: Dimensions and weights: - Weight (net): approx. 510 kg _____ Extraction connection: - Extraction nozzle diameter at fence: 1 x 120 mm Hnodpfx Asxnqx Rjh Dju - Extraction nozzle diameter at machine: 2 x 80 mm _____ Worktable: - Table length: 2500 mm - Table width: 810 mm - Table height: 923 mm _____ Installation information: - Explanation of required space: Dimensions consider maximum travel or usable length. - Working area length: 3700 mm - Working area width/depth: 5000 mm - Explanation of working area: Please add the specified dimensions to the required space to calculate the recommended free installation area for the machine. _____ Equipment: - Fence: Heavy-duty professional version with aluminium fence jaws and fine adjustment, front adjustment by hand crank with digital indicator - Curved milling guard: YES - Spindle height adjustment: manual - Spindle tilt adjustment: manual - Control: manual height and tilt adjustment of milling unit - Control elements’ position: on the machine body - Table: table extension left and right and pull-out workpiece support (total width 2500 mm) _____ Electrical data: - Connection voltage: 400 V - Mains frequency: 50 Hz - Drive motor power: 7.0 kW _____ Milling spindle: - Spindle tilt: -45° to +45° - Usable spindle length: 140 / 180 mm - Explanation for usable spindle length: 30–35 mm spindle Ø / 40–50 mm spindle Ø - Milling spindle stroke: 90 mm - Interchangeable spindle: MK4 - Spindle speeds: 3000/4500/6000/8000/10000 rpm _____ Max. milling tool diameters: - Max. retractable tool diameter: 320 x 60 mm - Max. profile milling diameter: 250 mm - Max. tenoning diameter: 350 mm - Max. form milling diameter: 160 mm

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is mounted on four large trapezoidal-thread spindles, ensuring maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard noise and chip protection curtain at infeed and outfeed Adjustable roller pressure Front feed roller with helical toothing Outfeed roller with rubber coating Powerful industrial motor Equipment details TERSA models with Tersa cutterhead Knife changes in seconds When the machine starts, centrifugal force automatically tensions the knives—self-locking The knife projection is automatically set without using jigs Work table The work table is mounted on four large trapezoidal-thread spindles, guaranteeing maximum stability under all working conditions Standard with electric table adjustment Thanks to the special lifting system, the table position is reliably maintained even without locking Helically toothed steel feed rollers for constant and even wood feed Second, rubberized feed roller at outfeed Heavy-duty anti-kickback devices prevent workpiece kickback A 4-knife cutterhead ensures optimal planing results Dimensions & weights Length: approx. 1170 mm Width/depth: approx. 1003 mm Weight: approx. 660 kg Hnsdpfx Ahod Hx E Io Dju Dust extraction connection Extraction port diameter (thickness): 150 mm Drive power Main motor: 7.5 kW Installation information Required length: 1170 mm Required width/depth: 1003 mm Required height: 1197 mm Note on required space: Dimensions account for maximum travel or working lengths. Machine body length: 1170 mm Machine body width/depth: 705 mm Length: 1000 mm Width: 2000 mm Note on working area: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Thicknessing Thickness table length: 520 mm Thickness table width: 1000 mm Min. working height: 3.5 mm Max. working height: 250 mm Min. working length: 210 mm Max. cutting depth: 8 mm Electrical data Connection voltage: 400 V Cutterhead Type: TERSA Diameter: 120 mm Number of knives: 4 pcs Speed: 4500 rpm Max. planing width: 520 mm Feed Speed: 5/8/12/18 m/min

Stanje: dober (rabljeno), Koda: 0197 Blagovna znamka: CASADEI INDUSTRIA Model: K 30/10 HF - CE standard Avtomatska robna lepilka za ravne plošče z lepilnim lončkom za obdelavo lesa, furnirja, PVC-ja, melamina, ABS-a in različnih materialov Tehnični podatki: - Avtomatski tračni transporter za podajanje plošč – hitrost 7 m/min Hnedpfx Aew Hcinsh Deu - Višina plošče: 10–45 mm - Debelina robnega traku: do 3 mm - Enota za lepljenje: prostornina lepilnega lončka 1,2 kg – elektronska kontrola temperature - Prednja in zadnja pnevmatska enota za čelno rezanje s krožno žago Vidia – mikrometrična nastavitev globine reza – hitrost rezanja 9000 obr/min – premer rezalne plošče 80 mm - Zgornja in spodnja enota za obrezovanje koncev – Vidia rezkarji premera 80 mm – možnost kombiniranih rezkarjev za radij/posnetje – hitrost obrezovanja 9000 obr/min - Skupna moč: 2,2 kW - 3 odsesovalna priključka premera 60 mm - Transportni valjčni podajalnik za podporo plošč - Skupne dimenzije: 2150 x 800 x 1200 mm (VxŠxG) - Teža: 405 kg

Stanje: novo, Leto izdelave: 2025, Motorized thickness table adjustment with two speeds Digital display for working height Thickness table made of cast iron The thickness table is supported on four large trapezoidal-thread spindles for maximum stability and precision Four feed speeds Optionally available with two rollers in the thickness table Standard equipment includes noise protection and chip protection curtains at the infeed and outfeed sides Adjustable roller pressure Front infeed roller with helical gearing Outfeed roller with rubber coating High-performance industrial motor Equipment Details TERSA models with Tersa cutterblock Knife change in seconds When the machine starts, the knives are automatically tensioned by centrifugal force – self-locking The knife projection is set automatically without the need for setting jigs Work Table The work table is mounted on four large trapezoidal-thread spindles to ensure maximum stability under all operating conditions Standard equipment includes electric table adjustment Thanks to the special lifting device, the table position remains secure even without locking Helical-toothed steel infeed rollers ensure a constant and even wood feed Second, rubber-coated feed roller at outfeed Solid kickback devices prevent workpiece kickback A 4-knife cutterblock ensures optimal planing results Dimensions and Weights Hnodpfx Ahjff Efae Dsu Length approx. 1305 mm Width/Depth approx. 1080 mm Weight approx. 750 kg Dust Extraction Connection Extraction port diameter thicknesser: 150 mm Drive Power Main motor: 9 kW Installation Information Required space length: 1305 mm Required space width/depth: 1080 mm Required space height: 1197 mm Space requirement explanation: The dimensions consider maximum travel distances or usable lengths. Machine body length: 1305 mm Machine body width/depth: 725 mm Length: 1000 mm Width: 2000 mm Working area explanation: Please add the indicated measurements to the required space to obtain the recommended free installation area for the machine. Thicknesser Thickness table length: 630 mm Thickness table width: 1000 mm Minimum working height: 3.5 mm Maximum working height: 300 mm Minimum working length: 210 mm Maximum cutting depth: 8 mm Electrical Data Connection voltage: 400 V Phase(s): 3 phases Current type: AC Mains frequency: 50 Hz Cutterblock Type: TERSA Diameter: 120 mm Number of knives: 4 Speed: 4500 rpm Maximum planing width: 630 mm Feed Speed: 5/8/12/18 m/min Location: Ex stock 54634 Bitburg - available immediately -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, CASADEI F 25 LL FK - Spindle Moulder with Tilting Spindle and Table Extensions With Aigner integral fence and 3-roll power feeder - Machine in like-new condition - Spindle moulder with tilting spindle from -45° to +45° Solid steel and grey cast iron construction Dynamically balanced spindle assembly, anchored to the worktable Especially robust design Smooth operation due to precision assemblies and high dead weight Standard with reversible spindle rotation (right/left) and electronic lock when changing direction 5 speeds from 3000 - 10,000 rpm Speed can be changed easily and conveniently from the machine side Standard with MK 4 interchangeable spindle system Large worktable made of cast iron for lasting precision Easy operation thanks to controls and speed display on the front of the machine Spindle fence with fine adjustment and aluminium fence cheeks as standard Powerful industrial motor Equipment details: Spindle fence Spindle fence with hand crank/handwheel adjustment from the front With digital display Interchangeable spindle MK 4 interchangeable spindle standard on all CASADEI F 23 and F 25 models Sliding table option Optional sliding table for small tenoning jobs and slotting operations Scope of delivery: Manually tilting spindle from +45° to -45° Speed display via LED on the front Aluminium fence cheeks Curved moulding guard Reversible spindle rotation MK 4 interchangeable spindle Spindle fence with hand crank/handwheel adjustment from the front with digital display Table extensions left and right (2500 mm length) Extending workpiece support (2500 mm length) Model CASADEI F 25 LL FK Article No. 5220728 Technical data Worktable dimensions: 2500 x 810 mm Spindle tilting range: +45° to -45° Usable spindle length at diameter 30-35 mm: 140 mm Usable spindle length at diameter 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool diameter (profiling): 250 mm Max. tenoning tool diameter: 350 mm Max. form cutter diameter: 160 mm Max. lowerable tool diameter: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 rpm Motor power: 400 V / 50 Hz / S6-40% 7 kW Weight: 480 kg Hodpfjxac Eyex Ah Denu Extraction port diameter (fence): 1 x 120 mm Extraction port diameter (under table): 2 x 80 mm Location: Ex stock 54634 Bitburg - Available immediately -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Compact wide belt sander with combination sanding unit With special features package – Top condition – Special features package: - On/off switching of the sanding shoe from the control panel - On/off switching of the drum from the control panel - Electronic control Fox 500 KTR - Table extension with two rollers for infeed and outfeed - Automatic table positioning via push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding shoe for fine sanding Standard-equipped with diagonally grooved steel drum Ø 120 mm for calibration Fine adjustment of working height Clear, user-friendly control panel at the front Robust tube-reinforced monoblock steel machine body, robot-welded, with working units positioned high up for maximum rigidity Motorized table height adjustment with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed belt with negative profile Flexible steel pressure rail before the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal adjustment option for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width 950 mm Equipment details Combination unit for calibration and sanding Hedpfxexac E Hj Ah Donu Diagonally grooved steel drum Ø 120 mm with fine height adjustment Hard sanding shoe with graphite pad Universal design for calibration and sanding of solid wood, particle boards, and veneer Technical data Length (product) approx. 1388mm, height (product) approx. 1668mm Width/depth (product) approx. 1545mm Dust extraction connection Suction nozzle diameter 140mm Electrical data Supply voltage 400V, current type AC Phase(s) 3Ph, mains frequency 50Hz Feed motor power 0.33 / 0.55kW Table height adjustment motor power 0.25kW Drive motor power 7.5kW Sanding unit Sanding belt length 1525mm, max. sanding width 950mm Sanding belt width 970mm Feed unit Feed speed 4.5 / 9m/min Workpiece Min. workpiece height 4mm, max. workpiece height 170mm Location: ex stock 54634 Bitburg – immediately available –

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, CASADEI XENIA 40 M A With tilting 400 mm saw blade and scoring unit. MA version features motorized height and angle adjustment of the saw blade as well as electro-motorized adjustment of the rip fence. The machine is in excellent condition due to very low usage. - Robust steel and cast iron construction ensures precision, smooth operation, and durability - Smooth-running and precise sliding table made of anodized aluminum with proven, permanently smooth ball contact system on hardened guides – 10-year warranty on wear of carbide guide rails - Six-year HOLZKRAFT warranty on wear of the tilting segments of the saw unit - Cast iron saw table - Large support surfaces thanks to standard table extension and widening - Fold-down rip fence, manually adjustable with fine adjustment - Mitre crosscut fence, extendable up to 3200 mm, with two flip stops - Outrigger with material roller - Xenia 40 M A: solid round steel bar guidance, 50 mm diameter - Side-swivelling blade guard with integrated extraction port - M version standard with three saw blade speeds - Scoring unit with separate scoring motor TECHNICAL DATA Dimensions and Weights Net weight: approx. 1602kg Extraction Connection Extraction port diameter: 120mm Extraction port diameter blade guard: 80mm Installation Information Transport width: 1150mm Machine body length: 1800mm Machine body width/depth: 928mm Required space length: 7100mm Required space width/depth: 5050mm Required space explained: Dimensions account for maximum travel or usage lengths Working Area Length: 6400mm Working Area Width/Depth: 1900mm Working area explained: Please add the specified dimensions to the required space for the recommended free installation area for the machine. Electrical Data Supply voltage: 400V Line frequency: 50Hz Scoring motor power: 0.9kW Output power (main motor): 7.0kW Duty type of main drive motor: S6 Duty cycle main drive motor: 40% Sliding Table and Table Squaring frame length: 3200mm Saw Unit Cutting width with rip fence: 1270mm Hnedpfxsxiq Tqj Ah Deu Max. crosscut width left of blade: 3200mm Saw tilting: 90 - 45° Max. cutting height 90°: 140mm Max. cutting height 45°: 99mm Saw blade diameter: 400mm Saw blade speed: 3000 - 4000 - 5000 rpm Scoring Unit Scoring blade diameter: 120mm Scoring blade speed: 8500 rpm Location: ex stock 54634 Bitburg - Immediately available - Subject to prior sale

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, E450PM – AVTOMATSKI ROBNI LEPILNI STROJ V000047 LME450PM-5 z enoto za rezkanje spojev Stroj v vrhunskem stanju NAPETOST 400/50/3 KRMILJENJE S 7'' ZASLONOM NA DOTIK ZAMENLJIVA LEPILNA ENOTA VR – MULTIFUNKCIJSKA ČELILNA ENOTA Orodje za ravno/zaobljeno čeljenje KOMPLET ORODIJ R=2 mm SKOBELNA REZILO ZA POVRŠINO ENOTA ZA LOČILNO SREDSTVO LED NOTRANJA OSVETLITEV Hnjdpfxexac Hwj Ah Dou DOKUMENTACIJA V NEMŠČINI INFRARDEČA SVETILKA za ogrevanje plošč SKOBELNA ENOTA Lokacija: iz zaloge 54634 Bitburg - na voljo takoj -

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, CASADEI F 25 LL FK – Spindle Moulder with Tilting Spindle and Table Extensions Spindle moulder with tilting spindle from -45° to +45° Robust steel and cast iron construction Dynamically balanced spindle moulder unit anchored to the worktable Especially sturdy design Smooth operation thanks to precision aggregates and high net weight Standard with forward/reverse spindle rotation and electronic interlock during direction change 5 speeds from 3000 - 10000 rpm Speed change is simple and convenient from the machine side Standard with MK 4 interchangeable spindle system Large cast iron worktable for permanent precision Easy handling due to controls and speed display on the front panel Fence with fine adjustment and aluminium fence jaws as standard Powerful industrial motors Equipment features: Spindle moulder fence Fence with crank/handwheel adjustment from the front With numeric display Interchangeable spindle MK 4 interchangeable spindle as standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenoning operations and slotting Hnsdpjdqzcxsfx Ah Dju Scope of delivery: Manually tiltable spindle from +45° to -45° Speed display via LED on the front Aluminium fence jaws Curved guard for moulding operations Spindle rotation with forward/reverse switch MK 4 interchangeable spindle Fence with crank/handwheel adjustment from the front with numeric display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article No.: 5220728 Technical data: Worktable dimensions: 2500 x 810 mm Spindle tilt range: +45 to -45 degrees Usable spindle length for Ø 30-35 mm: 140 mm Usable spindle length for Ø 40-50 mm: 180 mm Spindle stroke: 90 mm Max. tool Ø profiling: 250 mm Max. tenoning tool Ø: 350 mm Max. shaper tool Ø: 160 mm Max. lowerable tool Ø: 320 x 60 mm Speeds, 5-step: 3000/4500/6000/8000/10000 rpm Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction port Ø at fence: 1 x 120 mm Extraction port Ø under table: 2 x 80 mm Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, Casadei Panel Saw Xenia 40, Year 2022 Robust steel and cast iron construction ensures precision, smooth operation, and durability Smooth-running, precise sliding table made from anodized aluminum with proven, permanently smooth ball contact system on hardened rails – 10-year warranty against wear on carbide guideways Six-year HOLZKRAFT warranty against wear on the tilting segments of the saw unit Cast iron saw table Large support surfaces thanks to standard table extension and widening Fold-away rip fence, manually adjustable with fine adjustment Miter fence adjustable, extendable up to 3200 mm, with two folding stops Outrigger with material support roller TECHNICAL DATA Dimensions and Weights Net weight (approx.): 661 kg Extraction Connection Extraction port diameter: 120 mm Extraction port diameter blade guard: 80 mm Setup Information Transport width: 1150 mm Electrical Data Connection voltage: 400 V Mains frequency: 50 Hz Scoring motor output: 0.9 kW Motor power output: 7.0 kW Drive motor duty type: S6 Drive motor operating time: 40% Sliding Table and Table Crosscut frame length: 3200 mm Panel Saw Unit Cutting width with rip fence: 1270 mm Max. crosscut width left of saw blade: 3200 mm Saw blade tilt: 90 - 45° Max. cutting height at 90°: 140 mm Max. cutting height at 45°: 99 mm Saw blade diameter: 400 mm Saw blade speed: 3700 rpm Scoring Unit Scoring blade diameter: 120 mm Scoring blade speed: 8500 rpm EQUIPMENT Scoring unit Anodized aluminum sliding table Handle for sliding table Material support roller on crosscut frame Saw rip fence with round bar guide Stops: professional folding stops Hodjxac R Aepfx Ah Dsnu Table extension Table widening Pendulum saw blade guard Location: ex stock 54634 Bitburg - immediately available -

Stanje: novo, Leto izdelave: 2025, Large surfacing tables made of grey cast iron The adjustment of the surfacing table is done via a precise parallelogram system, ensuring that the distance between the table ends and the cutter shaft remains constant in every position The large, stable fence made of anodized aluminum is easily adjustable and tiltable from 0° to 45° The fence tilt can be read from the operator's position Supplied as standard with auxiliary fence Large four-knife cutterhead, precision bearing Smooth operation due to precision unit and heavy cast construction Powerful industrial motor Maximum operator safety with utmost ease of use Hnedpoff Efcefx Ah Deu Chip removal display via scale Manual table adjustment Motor protection switch Equipment Details Including folding auxiliary fence for narrow workpieces Manual quick adjustment of chip removal with scale and clamping rotary knob Safety Guard The safety guard is foldable and designed to ensure operator protection without hindering the workflow TERSA Models with Tersa Cutterhead System No more adjustment or screwing Cutter knives change within seconds Self-locking Very low noise emission Perfect planing results Dimensions and Weights Length approx. 2750 mm Width/Depth approx. 1500 mm Weight approx. 680 kg Surfacing Total table length 2720 mm Infeed table length 1498 mm Max. chip removal 8 mm Fence length 1200 mm Fence height 190 mm Fence tilt range 90° - 45° Dust extraction connection Extraction port diameter 120 mm Drive Power Main motor 7 kW Installation Information Required length 2750 mm Required width/depth 1604 mm Space requirement explanation: Dimensions include maximum travel paths or usable lengths. Electrical Data Connection voltage 400 V Phase(s) 3 Ph Current type AC Mains frequency 50 Hz Cutterhead Type TERSA Diameter 120 mm Number of knives 4 pcs Speed 5000 rpm Max. planing width 520 mm Location: Ex-stock 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, CASADEI PF 520 M Tersa – Jointer/planer for professional use, with 520 mm planing width and motorized adjustment of the infeed table - Oversized jointer tables made of hardened and stress-relieved cast iron - Rigid steel-cast iron design for precision and durability - The robust fence is easily adjustable and offers a generous support surface - Large fence, tiltable from 90° to 45° - Fence tilt angle can be read easily from the operator's position - Supplied as standard with auxiliary fence - Large, four-knife cutterhead with precision bearings - Smooth operation thanks to precision unit and heavy-duty cast construction - Powerful 7.0 kW (S6) motor - Maximum operator safety with the simplest operation Scope of delivery: - PF 520 M Tersa - Tilting auxiliary fence - TX-Matic planer cutterhead guard - Reinforced main motor 7.0 kW Technical data: Total length of jointer tables: 2960 mm Hnedeb D Sblspfx Ah Deu Planing width: 520 mm Fence dimensions: 1100 x 160 mm Fence tilt range: 90° - 45° Max. depth of cut: 8 mm Cutterhead diameter / number of knives: 120 mm / 4 pcs. Speed: 5000 rpm Motor output 400 V / 50 Hz / P2 / S1: 7.0 kW (9.0 HP) Extraction port diameter: 120 mm Weight: Location: Ex-stock Bitburg Available for immediate delivery

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed Hsdpfx Ahsgf Sw No Djnu - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm