Debelinec

Grubościówka CASADEI R63 H3 – szerokość CASADEI R63 H3

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Podsi Dfidopfx Anporc The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, Formatna žaga SCM 320cm SiX Voziček 320cm, Agregat nagibljiv v obe smeri od +45 do -45 stopinj, Nagib in dvig/spust žaginega lista motorno nastavljiva, Ograja na desni strani motorno nastavljiva do 1500mm, Dvoosni predrezkar električno nastavljiv, Motor 7,5KW, hitrosti na frekvenčnem pretvorniku Maks. premer lista 550mm, Voziček lomljiv pod kotom Rabljena stroj, v dobrem stanju Stroj ima novo neoriginalno krmiljenje Prodpfxjzd Uf Tj Anpec Vse nastavitve delujejo.

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: Prsdpfjpgkmwsx Anpoc T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately -

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Podpjhp Rcrsfx Anporc Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm Prododqzh Rjpfx Anpsc

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available - Prjdpfxjqlckpj Anpsc

Leto izdelave: 2016, stanje: delavnici obnovljeno (rabljeno), Agregat z 2 hidravličnima pritisnima čevljema od zgoraj za brezpremični pritisk lepljenih deskastih lamel v mehanski stiskalnici. (Namesto velikega kladiva ali težkih uteži na žerjavni kljuki) Pogon SEW z reduktorskim motorjem in trenjskim kolesom 1,1 kW. Hidravlični agregat 5,5 kW. Prostornina oljnega rezervoarja: 160 l. Tlak: 40 / 250 bar. Stroj je bil leta 2012 v celoti obnovljen in opremljen z novo elektro omaro in novo električno napeljavo. Ker stranka ni plačevala obrokov, smo stroj po približno 1,5 letih ponovno prevzeli. Stroj je bil v uporabi največ 1 leto v urnem režimu. Prsdjd Dcmqopfx Anpec

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Altendorf F45 Elmo 3-osni upravljanje Dolžina vozička: 3200 mm Širina reza na vzdolžnem prislonu: 1300 mm Predrezilo: Pripravljeno Višinsko nastavljanje žaginega lista: električno / pozicijsko upravljanje Nagibno nastavljanje žaginega lista: električno / pozicijsko upravljanje Širinski prislon: električno / pozicijsko upravljanje Nastavitev dolžinskega prislona: ročno Prikaz kota žaginega lista: digitalni prikaz Prikaz višine reza: digitalni prikaz Dolžinsko merilo z funkcijo za poševen rez: da Premer žaginega lista: 450 mm Število obratov: 4 Moč motorja: 5,5 kW Priključek za odsesavanje: 80 in 120 mm Prsdpfxsy Sbvks Anpsc Duplex kotni prislon Leto izdelave: 2010 Cena: 15.500 €

Stanje: rabljeno, Tehnični podatki: Maksimalna širina glajenja: 630 mm Maksimalna višina glajenja: 300 mm Premer nožnega valja: 120 mm Število nožev: 4 Število valjev v mizi: Hitrost podajanja: 5/8/12/18 m/min Električno dvigovanje Priključek za odsesavanje: 150 mm Napajanje: 400 V Pedpfx Anexz Dlkspjrc Moč motorja: 7 kW Skupne dimenzije: Dolžina: 1280 mm Širina: 630 mm Višina: 1200 mm

Stanje: novo, Leto izdelave: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to high-precision assembly and heavy cast-iron construction Front steel feed roller with helical toothing for optimal feeding Brushed steel outfeed roller, optionally available with rubber coating Work table supported by four large columns to ensure maximum stability under all working conditions Thickness table adjustment via handwheel with numeric indicator for the set planing height (precise to 0.1 mm) Standard with two feed speeds, conveniently selectable from the operator panel High-performance industrial motor Robust cast-iron steel construction Equipment details: Work table Mounted on four large-diameter spindles providing optimum stability under all working conditions Special lifting mechanism ensures table position remains accurate without the need for locking Tersa planing cutterhead No more setting or screwing needed Prodjd Hx Hpepfx Anpec Planer knife change in seconds Self-locking system Motorized thickness table height adjustment for S 52 elite s Motorized thickness table height adjustment with electronic decimal display For higher precision and improved operator convenience Dimensions and weights Length approx. 1080 mm Width/depth approx. 1440 mm Weight approx. 455 kg Dust extraction connection Thickness extraction port diameter 120 mm Drive performance Main motor 7 kW Installation requirements Required length 1440 mm Required width/depth 1071 mm Required height 1088 mm Explanation installation space: dimensions allow for maximum movement or working lengths Machine body length 1030 mm Machine body width/depth 998 mm Length 1000 mm Width 1800 mm Explanation working area: please add the stated dimensions to the installation space to obtain the recommended free space for the machine Thickness planing Thickness table length 520 mm Thickness table width 850 mm Minimum working height 3 mm Maximum working height 240 mm Minimum working length 220 mm Maximum depth of cut 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 120 mm Number of knives 4 Speed 5000 rpm Maximum planing width 520 mm Feed Speed 5/8/12/18 m/min