Debelina planerjev

Casadei / SCM PS 63 Tersa - sofort verfügbar -

Stanje: rabljeno, Leto izdelave: 1994, AUTOMATIC 5-SPINDLE MOULDER WEINIG MOD. PROFIMAT 23 – USED Isdpsrm Rxwjfx Aqueih Configuration: - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle - 4) Top horizontal spindle - 5) Bottom horizontal spindle Working width: 230 mm Year: 1994 Voltage: 380/50

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, but without saw blade The machine can be tilted via a handwheel and worm gear (rear) Iisdpfji Dfidex Aqush Saw blade diameter: 520 mm, saw blade bore: 50 mm Saw blade speed: 2,800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swivelled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swivelled to one side up to approx. 25 degrees for acute angles and tilted to the left up to 30 degrees Machine weight: approx. 250 kg Location: Ex stock 54634 Bitburg - Immediately available -

Stanje: rabljeno, vrsta goriva: dizel, barva: modra, Leto izdelave: 2010, Leto izdelave: 2010 Uporabni material: beton Oznaka CE: da Poškodbe: nobene Iiodpfx Aqeuu A S Neuoh Cena: Na zahtevo

Leto izdelave: 2002, stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack with automatic infeed with multi-blade cross-cut saw with stacking unit Specification: Wood infeed length: min. 150 mm max. 1000 mm average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Outfeed wood length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint execution vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: Connection voltage: 400 V Control voltage: 24 V 50 Hz Plant completely wired up to the control cabinet. Iiedeg D Ugkspfx Aqush Finger length / possible wood cross-section and glue type can still be adapted Performance: 6 milling tables/min Working height: 960 mm Table width: 600 mm Glue application: double-sided Technical parameters: Input material: Input length of parts (min. - max.): 150-1000 mm Part width (min. - max.): 40-155 mm Part thickness (min. - max.): 20-80 mm Working height: 960 mm Table width: 600 mm Glue application: double-sided application

Stanje: dober (rabljeno), • Electronic 11-spindle straight line edging and polishing machine for flat edges and mitres, feed direction right to left Iiederhilxopfx Aqush • Edge angle adjustable from 0 to 45 degrees • Model: TL 11 AV • Serial number: 497-01 • Machine configuration: o 2 x 150 mm diamond wheels for edges o 2 x 150 mm polishing wheels o 2 x 150 mm polishing wheels o 1 x cerium-impregnated wheel o 1 x 150 mm diamond wheel for rear arris o 1 x 150 mm polishing wheel for rear arris o 1 x 150 mm diamond wheel for front arris o 1 x 150 mm polishing wheel for front arris Special price: €6,500

Stanje: novo, Leto izdelave: 2024, Martin T 54 Surface Planer Only with a high-quality surface planer can you achieve truly perfect foundational work. The T54 was developed precisely with this objective in mind. It allows you to effortlessly dress workpieces at the highest modern standards and accurately apply angled edges. The machine comes standard with a TERSA solid steel cutterblock. The Xplane cutterblock with a shearing cut is available as an optional extra. Chamfer planing is handled with ease, as the user-friendly single-lever adjustment allows you to quickly set any angle between 90° and 45°. The robust cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require even more support surface, both the infeed and outfeed tables can be extended by 380 mm each – also in cast iron, of course. Technical Data: Table width: 500 mm Table length: 2,840 mm Maximum depth of cut: 8 mm Cutterblock: 125 mm diameter, 5,000 rpm, Tersa Z4 Speed: 5,000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorized table adjustment Features: T 54 T 5462-a Suvamatic T 541-a Tersa 4-knife cutterblock Location: In stock, 54634 Bitburg - available immediately - Iiedpjpgkmwefx Aquoh

Stanje: novo, Leto izdelave: 2025, Robust steel and cast iron construction With fixed milling spindle 3 spindle speeds from 3,500 to 10,000 rpm Milling spindle with reversible rotation (right/left) Large-dimensioned cast iron milling unit, mounted directly on the table With extraction hood beneath the worktable for improved dust removal Solid and precise cast iron table Quick and effortless speed changes High-performance 5.0 kW motor Standard safety hoop guard Quality made in Italy Equipment details Cast iron milling unit: Mounted directly on the milling table Milling spindle mounted high with precision ball bearings, resulting in minimal bearing load and maximum service life 3 milling speeds from 3,500 to 10,000 rpm Powerful motors Equipped with a robust three-phase motor Milling protection The standard milling guard comes with a height-adjustable guide rail and protective plate for maximum safety Fence Precise milling fence with quick adjustment and fine adjustment with scale at the fence jaw Integrated extraction port ensures clear visibility Table opening A large table opening enables the use of larger panel raising cutters as well as tenoning and slotting tools both above and below the table Safety hoop guard Supplied as standard Reversible fence jaws Versatile, integrated fence for bridging the tool gap Enables safe operation even with narrow workpieces TECHNICAL DATA Dimensions and weights Net weight approx.: 240 kg Extraction Extraction port diameter: 2 x 120 mm Worktable Table length: 1,945 mm Table height: 900 mm Table width: 695 mm Installation details Required space length: 1,945 mm Machine body width/depth: 575 mm Required space width/depth: 920 mm Working area length: 1,600 mm Note on space requirements: The specified dimensions take into account the maximum travel or usable lengths. Working area width/depth: 1,600 mm Machine body length: 1,000 mm Note on working area: Please add the specified measurements to the required space to obtain the recommended free area for the machine. Electrical data Supply voltage: 400 V Drive motor power: 5.0 kW Network frequency: 50 Hz Milling spindle Usable spindle length: 100 mm Spindle speed(s): 3,500 / 7,000 / 10,000 rpm Spindle projection max. above table: 130 mm Spindle shaft diameter: 30 mm Milling tool diameter, max. Max. lowerable tool diameter: 180 mm Iiodpfehp Rcrex Aqueh SCOPE OF DELIVERY Safety hoop guard Aluminium fence jaws Table extension left and right Extendable workpiece support

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, minimax ti 55es LL - Spindle Moulder Image shows T 55 i elite s standard version The professional joiner's machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting Isdpfjdqzh Rsx Aqueih Stable steel/cast iron construction Large-dimension spindle unit made from cast iron, tiltable up to -45° to the rear Spindle speeds displayed via LEDs Quick and easy speed change thanks to eccentric clamp Reversible spindle rotation (clockwise/counter-clockwise) Height and tilt indication accurate to 0.1 mm Heavy-duty professional fence: fine adjustment via rack-and-pinion, digital readout, aluminum fence jaws, 3-position settings for fast repeatability Scope of delivery: Aluminum fence jaws Curved guard Table extension left and right Model: minimax ti 55es LL Article No.: 5502252 Technical Data Table dimensions: 2500 x 655 mm Sliding table size: Useful spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilt: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400 V/50 Hz/S6-40%: 5.0 kW Extraction port diameter: 2 x 120 mm

Stanje: novo, Leto izdelave: 2024, Martin Thickness Planer T 45 with Tersa Cutterhead The T45 thickness planer provides ideal conditions for modern manufacturing: It delivers cleanly planed surfaces, is quick and simple to operate, and also works extremely quietly. The standard electronic control with 99 stored planing dimensions makes height adjustment so easy that even the very first workpiece fits perfectly. Naturally, the thickness table can be moved at the push of a button or incrementally adjusted upwards in 0.1 mm steps. The feed control elements are also conveniently within reach. The heavy, vibration-damping composite base combined with the high-quality cutterhead bearings guarantees outstanding surface quality. Thanks to the sound-insulated construction, the standard version already operates with low noise emissions. • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Minimum workpiece length: 270 mm • Speed: 5,000 rpm • Controls: Single-axis control for planing dimension, up to 99 values storable, 49 of which can be used in a freely programmable planing sequence; buttons for manual rapid and fine adjustment according to digital display, pushbuttons for cutterhead start/stop, integrated operating hour counter • Cutterhead: TERSA solid steel Z4 Ø 125 mm; with lock for easy knife change • Thickness table: Electric adjustment with fine setting, travel speed 10 mm/s, four supporting spindles for tilt-free stability, precision-planed table surface • Feed: 2 speeds – 6 / 12 m/min, electrically selectable during operation; large rubber feed rollers Ø 85 mm for compensating varying timber thicknesses, gentle on material and self-cleaning, easy roller change; sectional pressure bar at infeed • Extraction: Swiveling, split hood with chip extraction port Ø 160 mm, connectable on left or right (dual-sided in special cases); minimum extraction airflow: 27 m³/min at 20 m/s Iiedpfxeqlckpe Aqujh • Maintenance system: Central lubrication rail for oil points; lubrication of bearings/cutterhead via nipple • Accessories: 1 grease gun (filled with long-life grease) 1 oil gun 1 open-ended wrench 1 tool for knife change 1 pair of dummy knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV • Emission values: Emission sound pressure level at workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (with extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Low-dust emissions according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Stanje: rabljeno, Formatna žaga SCM 320cm SiX Voziček 320cm, Iijdpfx Aezd Uf Tequjh Agregat nagibljiv v obe smeri od +45 do -45 stopinj, Nagib in dvig/spust žaginega lista motorno nastavljiva, Ograja na desni strani motorno nastavljiva do 1500mm, Dvoosni predrezkar električno nastavljiv, Motor 7,5KW, hitrosti na frekvenčnem pretvorniku Maks. premer lista 550mm, Voziček lomljiv pod kotom Rabljena stroj, v dobrem stanju Stroj ima novo neoriginalno krmiljenje Vse nastavitve delujejo.