Linija za spajanje prstov

NKT

Leto izdelave: 2007, stanje: delavnici obnovljeno (rabljeno), Fully automatic finger jointing line: Type Doppel-Pack Deded Tipajpfx Afnscd Machine is dismantled Machine is being overhauled Specifications: Wood input length: min. 150 mm max. 1000 mm average approx. 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood output length: 6030 mm Max. wood cross-section with 10 mm finger size: - Hardwood: 120 cm² - Softwood: 150 cm² Finger joint profile: vertical and horizontal Glue type: PVAC white glue, double-sided glue application Electrical data: - Connection voltage: 400 V - Control voltage: 24 V - Frequency: 50 Hz The system is completely wired up to the control cabinet. Finger length / possible wood cross-section and glue type can still be adapted on request. Performance: 6 milling tables/minute Working height: 960 mm Table width: 600 mm Glue application: double-sided application Technical parameters: Input material: - Input length of parts (min. - max.): 150 - 1000 mm - Part width (min. - max.): 40 - 155 mm - Part thickness (min. - max.): 20 - 80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided application (on both sides of the

Stanje: rabljeno, Sečnja hlodovine: 100–150 m³/h Sečnja manjših ostankov: 50–100 m³/h Teža: 3.165 kg Največji premer hloda: 254 mm Sekalnik Söderhamn Eriksson 670-56 CC z električnim motorjem. Sekalnik Söderhamn Eriksson 670-56 je namenjen izdelavi sekancev za proizvodnjo celuloze, vlaknenih in ivernih plošč. Za surovino se lahko uporabljata tako okroglo lesno deblo kot tudi odpadek iz žagarskih obratov. Podajanje lesa pri sekalniku 670-56 poteka vodoravno, pod kotom 37,5° glede na vlaknasto smer. Sekanci enakomerne, visoke kakovosti se lahko izločajo na dnu ali pa se odpihnejo naravnost navzgor. Bodite med tistimi lesno-predelovalnimi podjetji, ki znajo pametno upravljati z razpoložljivimi viri. Dcodpehclffofx Afnsd

Leto izdelave: 2010, stanje: pripravljen za uporabo (rabljen), Fully automatic finger jointing line: Type Doppel-Pack Machine is disassembled Machine will be inspected with operational guarantee Specification: Wood infeed length: min. 150 mm max. 1000 mm Dcodoncd Utepfx Afned average 400 mm Wood cross-section: min. 20 x 40 mm max. 80 x 180 mm Wood outfeed length: 6030 mm Max. wood cross-section with 10 mm finger size: Hardwood 120 cm² Softwood 150 cm² Finger joint type: vertical and horizontal Adhesive type: PVAC white glue, double-sided glue application Electrical supply: Connection voltage: 400 V Control voltage: 24 V 50 Hz System fully wired up to the control cabinet. Finger length / possible wood cross-section and glue type can be customised. Performance: 6 milling tables / min Working height: 960 mm Table width: 600 mm Glue application: double-sided With endless package feed Technical parameters: Input material: Input length of parts (min. - max.): 150 - 1000 mm Part width (min. - max.): 40 - 155 mm Part thickness (min. - max.): 20 - 80 mm Working height: 960 mm Bundle width: 600 mm Glue application: double-sided (on both sides of the part)

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 2.050 mm, vrsta nastavitve višine: pnevmatičen, višina skobljanja: 300 mm, 4-sided planer, working width: 2200 mm mounted on a rotary table for curved workpieces machine is enclosed Dcodpfx Aow A A Ebefned

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, Drying Paternoster for Finger-Jointed Boards Consisting of: - Transfer chain after finger jointing press, foldable - Drying paternoster approx. 7 m, suitable for board lengths up to 6 m - Cut-off and zeroing saw - Conveyor belt for residual wood disposal - Stacking system - Batten magazine is not for sale - Package cross conveyor Dcedpfowclkyex Afned The machine is in very good condition, very little operating time. The machine is still assembled but immediately available.

Stanje: pripravljen za uporabo (rabljen), For turning plates, discs, or bowls up to 250 mm diameter. Dcedpfx Asrh Hntofnsd Machine equipped with vacuum clamping.

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Location: In stock at 54634 Bitburg - immediately available - Dcedpfxjcqvhws Afnsd

Stanje: zelo dobro (rabljeno), SINGLE-SIDED DESTACKING STATION - Upper crossbeam can be shifted 180° (horizontally) - Console table with vacuum clamps - Internal lift table with motorized sheet metal roller conveyor - Front safety guard, movable Dcodpjcggy Sjfx Afned - Separate control cabinet and operator panel - External roller conveyor for handling destacked sheet stacks - External powered roller conveyor from destacking, also with belts for transfer at 90° sheet rotation - Operating capacity (cycles/min): 12-15 - Sheet thickness (min/max) mm: 10 - 40 - Min. sheet dimensions mm: 250 x 320 - Max. sheet dimensions mm: 1200 x 3000 - Total connected load kW: 10

Leto izdelave: 1999, stanje: rabljeno, Used Entex Extruder PL-WE150 complete with control cabinet, previously used for powder coatings, in good condition. Dcjdpfx Afjbqt Arenjd We can also offer you an Entex PL WE 70!

Stanje: novo, Leto izdelave: 2025, CASADEI PFS 520 – Surface and Thickness Planer with 520 mm Planing Width and Motorized Thickness Table Adjustment Robust steel and cast iron construction Large, ribbed surfacing tables made of cast iron, stress-relieved to prevent distortion Smooth operation due to high dead weight Four feed speeds Motorized thickness table lift with two speeds and digital display Segmented pressure shoes at the infeed 4-knife cutterblock, precision mounted Helical gear steel infeed roller for particularly uniform and gentle feeding of wood Outfeed roller with rubber coating Large surfacing fence, tiltable from 90° to 45°, easily readable from the front Standard with auxiliary fence Powerful S6 industrial motor (P2) Tersa Cutterblock System: Planer knife change in seconds When starting the machine, the planer knives are automatically tensioned by centrifugal force – self-locking The knife projection sets itself automatically, no adjustments or screws required The surfacing table is adjusted using a stable and precise parallelogram system, ensuring that the distance between the table edges and the cutterblock remains constant in any position The sturdy aluminum surfacing fence is anodized as standard, easily adjustable and provides a generous support surface Adjustable tilt from 90° to 45° is easily readable from the operator's position Auxiliary fence included as standard for safe planing, even of narrow workpieces Image shows machine with optional equipment The extraction port position remains the same for both surfacing and thickness planing No additional extraction hose or complicated repositioning around the machine is necessary Dcjdsbxz S Hopfx Afned Technical data: Total length of surfacing tables: 2300 mm Infeed table length: 1180 mm Planing width: 520 mm Fence dimensions: 1200 x 190 mm Fence tilt range: 90° – 45° Min./Max. planing height: 3 / 250 mm Cutterblock diameter/number of knives: 100 mm / 4 pcs Feed speed: 5 / 8 / 12 / 18 m/min Spindle speed: 5000 rpm Motor power: 400 V / 50 Hz / S6 Extraction port diameter: 120 mm Weight: 1020 kg Top machine Location: Bitburg – immediately available