Veb Höhe 130 Mm nakup rabljenega (85.517)

Stanje: rabljeno, Engine centering flange, motor flange, pump flange, motor centering bellhousing, coupling bellhousing, pump mount for large pumps, hydraulic pump, oil pump, gear pump Credpfx Ajd R Hq Ssnush - Motor centering diameter: 250 mm - Pump centering diameter: 62 mm - Height: 130 mm - Material: "Aluminum" - Quantity: 7x centering flanges available - Price: per piece - Dimensions: 285/285/H130 mm - Weight: 3.1 kg/piece

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Faceplate Diameter: 600 mm Height: 130 mm Bolt Circle for mounting: Diameter 128.5 mm Slot width: 16 mm Crsdpjd Tyvfofx Anujh Locking thread: 200 x 4 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, obratovalne ure: 33.107 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 1.300 kN, premer vijaka: 25 mm, delovna prostornina: 79 cm³, tlak vbrizgavanja: 2.398 letvica, izmetalna sila: 6.100 N, hod izmetalca: 100 mm, odmični hod: 606 mm, dolžina plošče: 750 mm, širina plošče: 850 mm, skupna masa: 10.600 kg, Oprema: dokumentacija / priročnik, ENGEL V 330H/80V/130 Combi – strojne za brizgano oblikovanje iz dveh komponent, namenjene za čiste prostore, leto izdelave 2006. Stroj izvira iz farmacevtske proizvodnje in je zasnovan za uporabo v čistih prostorih. Tehnični podatki: • 33.107 delovnih ur • Vijak 25/22 mm • Teža stroja 10.600 kg Razpoložljiva dodatna oprema: • Robot GEKU SR 500 ST • Zaščitna kletka • Vrteči se podstavek • Transportni trak Credpot A Ui Ajfx Anueh Lokacija: Schwaigern, Nemčija. Dodatna tehnična dokumentacija in ogled po dogovoru.

Leto izdelave: 2010, stanje: zelo dobro (rabljeno), Measuring column in matching transport case Height: 500 mm Crodpfx Anofdzvaeujh Diameter: 120 mm Weight: 37 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 500 mm, premer orodja: 120 mm, število rezil: 4, vrsta aktuacije: električni, največja hitrost vrtenja: 4.700 obr/min, skupna dolžina površin za skobljanje: 800 mm, skupna širina: 920 mm, skupna višina: 1.140 mm, skupna masa: 450 kg, GRUBOSTIČARICA VEBA S500 | 500 MM | 4 REZILA | 4,3 kW | 2009 | ITALIJA | Profesionalna grubostičarica / strigalna naprava VEBA S500 priznanega italijanskega podjetja VEBA Meccanica S.r.l. Naprava je namenjena natančnemu striganju lesenih elementov na določeno debelino. Robustna in kompaktna konstrukcija ter 4-rezilni valj za tradicionalna rezila zagotavljajo, da se naprava odlično obnese tako v tesarski delavnici kot pri proizvodnji elementov iz masivnega lesa. Naprava je izdelana v Italiji, rabljena in pripravljena za delo. NAJPOMEMBNEJŠE PREDNOSTI: - priznana italijanska znamka VEBA - model S500 - širina striganja 500 mm - 4-rezilni valj - tradicionalna rezila - robustna konstrukcija - 2 hitrosti podajanja - obseg višine obdelovanega materiala do približno 240 mm - maksimalna globina striganja do 8 mm - nastavitev višine mize - 2 valja v mizi za lažje podajanje materiala - naprava opremljena s certifikatom CE - leto izdelave 2009 TEHNIČNI PODATKI: - Širina striganja: 500 mm - Dimenzije delovne mize: približno 500 × 800 mm - Obseg višine obdelovanega materiala: približno 4–240 mm - Maksimalna globina striganja: 8 mm - Strigalni valj: Ø 110 mm - Število rezil: 4 kos - Vrsta rezil: tradicionalna - Hitrost vrtenja valja: približno 4700 vrt/min - Hitrost podajanja: 6,5 / 13 m/min - Valji v mizi: 2 kosa Credpsz A A Iwsfx Anuoh - Nastavitev višine: električna in mehanska MOTOR / NAPAJALNIK: Moč motorja: 4,3 kW Napetost: 400 V Napajanje: 3 faze DIMENZIJE IN MASA: Dimenzije naprave: približno 1000 × 920 × 1140 mm Masa: 450 kg – glede na oznako na napravi Vabimo vas, da preizkusite napravo na licu mesta. Možnost financiranja naprave preko lizinga ali obročnega plačila. ORGANIZIRAMO TRANSPORT.

Stanje: rabljeno, Mitralna hladna krožna žaga WMW (VEB DDR) Tov. št. 189886 Leto izdelave 1989 Premer žaginega lista max. 300 mm Območje reza pri 90° okroglo pribl. Ø 75 mm Kvadratno pribl. 70 x 70 mm Območje reza pri 45° okroglo pribl. Ø 55 mm Kvadratno pribl. 50 x 50 mm Vpenjalna širina primeža: 100 mm Crodjy Ra D Depfx Anuoh Hitrost žaginega lista: 31,5 obr/min Moč motorja: 0,37 kW Priključek: 230 V, 50 Hz - Nastavitev kota mitre do 45° - Materialni primež - Nameščen žagin list Ø 275 mm Potrebni prostor (d x š x v): 600 x 600 x 700 mm Teža: 47 kg V dobrem stanju

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 19,5 kW (26,51 KM), Avtomatski mehanizem Winkel Wolf K+G WETTER, premer 130 mm • Popolnoma obnovljen v tovarni, v ceno je vključeno 1-letno jamstvo. • Vključuje velik sprejemni lijak z zmogljivostjo nad 200 litrov in napravo za odstranjevanje tujkov (tovarniško nameščena). • Proizvedeno v Nemčiji. • Moč: 19,5 kW, z 2 hitrostmi za veliki vijak za dovod materiala in 2 hitrostmi za delovni vijak. • Dimenzije dovoda: 130 mm. Csdpfx Ajzum T Renusrh • Zunanje dimenzije: 1300 mm x 920 mm x 1650 mm. • Naprava ima 3 vijake: delovni, dovodni in mešalni. • Cena za dodatni avtomatski dvigalnik: 4.000 evrov, brez DDV.

Leto izdelave: 2002, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Izjemno zanesljiv ekstruder za plastiko OMP Prealpina s premerom 130 / 160 mm, ki smo ga dobavili leta 2002. Od takrat poznam zgodovino tega ekstruderja, saj sem bil prvotno dobavitelj. Sprva je bil namenjen za predelavo polipropilenskih filmov za embalažo sladkarij, pri čemer je bil film natisnjen v 100-odstotni meri, ekstruder pa je zelo dobro deloval pri odstranjevanju plinov in mešanju plastičnih materialov, dokler se pogodba ni iztekla. Ekstruder je v kaskadni izvedbi, kar omogoča znatno dodatno odvajanje plinov in mešanje polimerov. Za to se uporablja drugi, krajši cilindr ekstruderja s premerom 160 mm, ki dovaja staljeno in čisto plastiko v rezalno glavo, nato pa sledi centrifugiranje za sušenje pelet. Na linijo je bil nedavno nameščen izjemno učinkovit, popolnoma avtomatski mrežni filter FIMIC, ki zagotavlja verjetno najučinkovitejšo filtracijo, ki je na voljo podjetjem, ki se ukvarjajo z recikliranjem plastike. Zaradi kaskadne konfiguracije, vrhunske filtracije in odvajanja plinov je ta linija najbolj primerna za recikliranje težkih plastičnih folij ali vlaken. Linija ima silo s prostornino 7 kubičnih metrov, ki neposredno napaja v sistem s prisilnim dovodom v obliki stožca, ki dovaja material v podajalno cono ekstruderja s premerom 130 mm. Vključena je tudi naprava za doziranje koncentrata/aditivov. Leta 2022 je bila linija prodana podjetju v Litvi od prejšnjega lastnika v Združenem kraljestvu, vendar se plastični material, za katerega se je predvidevalo, da bo na voljo v Litvi, ni nikoli zagotovil. Linija je bila od takrat shranjena in je še vedno razstavljena ter pripravljena za takojšnjo dostavo novemu kupcu. Crodozwhtdopfx Anujh

Stanje: dober (rabljeno), Ročne vzvodne škarje, škarje z dolgim rezilom za pločevino in okroglo jeklo, vzvodne škarje, škarje za pločevino, škarje za profilirano jeklo, ročne vzvodne škarje Cedpfxox Ehlpe Anusrh - Proizvajalec: VEB, ročne vzvodne škarje tip ScDH 5 - Dolžina reza: 200 mm - Rezilna zmogljivost: 5/7 mm - Pridržalo: brezstopenjsko nastavljivo - Dimenzije: 470/120/V1270 mm - Teža: 28,1 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking, used: Hot-dip galvanized bolt-together system Scope of delivery: - 4 double-sided racking uprights, height 3,500 mm, each with 1,200 mm base parts - 24 cantilever arms, depth 1,200 mm, standard - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Incl. mounting hardware (floor anchors not included) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available anytime) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - All components with hot-dip galvanized finish - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright has 6 bolted cantilever arms and 2 base sections, depth 1,200 mm, standard = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (floor anchors not included) - Supplied with assembly instructions and C4 rated load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection available Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notice before delivery. The material is packed for easy unloading. Csdpsmkixwjfx Anuerh When installing outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, flat, and suitable for anchoring as well as capable of supporting the applied loads. It is the customer's responsibility to check and ensure the suitability and load-bearing capacity of the substrate and obtain any necessary permits. Racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to German safety guidelines, it is recommended that the uprights have a minimum overhang of 500 mm above the highest storage level.

Stanje: rabljeno, Lever shear, long blade sheet and round steel shear, lever shear, sheet metal shear, section steel shear - Delivery: as is, as inspected Cjdpfx Anov Eakbjuorh - Hand lever: missing - Manufacturer: VEB Pels, lever shear section steel shear type HS 7 - Cutting length: 250 mm - Angle profile: see photos - Dimensions: 580/170/H600 mm - Weight: 76 kg

Stanje: rabljeno, Leto izdelave: 1991, skupna višina: 2.100 mm, skupna dolžina: 4.200 mm, skupna širina: 1.700 mm, Couleur : vert Poids à vide : 4 000 kg - Année de construction : 1991 - Documentation disponible : Non - Certificat CE présent : Non - Commande : Conventionnelle - Puissance [kW] : 5,0 - Nombre d’essieux [pcs.] : 3 - Course de l’axe X [mm] : 1600 - Course de l’axe Y [mm] : 500 - Course de l’axe Z [mm] : 310 - Largeur de table [mm] : 1730 - Profondeur de table [mm] : 320 Cjdpfx Asy Tug Sjnuerh - Largeur de l’aimant [mm] : 1600 - Profondeur de l’aimant [mm] : 300 - Puissance de la broche principale [kW] : 5 - Options : Affichage digital - Dimensions de transport : 4200mm x 1700mm x 2100mm (L x l x h) - Poids transport [kg] : 4000kg - Colis de transport [pcs.] : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de la marge : TVA récupérable pour les professionnels Livraison et reprise possibles à tout moment pour tout matériel industriel Lukas van Rossum

Stanje: rabljeno, Tailstock, counter bearing for dividing head, indexing device, lathe - Tailstock: center height 110 mm Cedpfxjit Evws Anusrh - Dimensions: see drawing in the photos - Quantity: 2 tailstocks available - Price: per piece - Dimensions: 130/100/H160 mm - Weight: 2.7 kg/unit

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm Csdpfx Anjmidyfoujrh - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Credpfx Ansmhhl Houjh Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance Csdsh Ek Daopfx Anuerh - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: rabljeno, Tehnični podatki o prečni letvi paletnega regala: Regalni sistem: Jung Heinrich Tip: Delta Vključen je naslednji obseg dobave: 01x prečna letva paletnega regala, rabljena Barva materiala: rumena Škatlasti profil: 130 x 50 mm Kljuke: 3 HK (kljuke) Svetla širina: pribl. 2.700 mm 02x varnostni zatiči, rabljeni Izvedba: popolnoma pocinkano Za zavarovanje nosilcev Vaši kontakti v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Credpfxsyiz Dus Anuoh Splošne informacije o artiklu: Ta artikel je na voljo samo za osebni prevzem. Dodatni prevoz ali pošiljanje tega artikla je povezan z dodatnimi stroški, ki jih je mogoče posebej preveriti glede na kraj dostave oziroma obseg dobave.

Stanje: dober (rabljeno), Technical data for pallet rack beam: Shelving system: Nedcon Type: NS Codpfxjv Tu Epe Anusrh Scope of delivery includes: 01x pallet rack beam, used Material color: blue Box profile: 130 x 50 mm Connector: 7 HK (hooks) Clear span: 3,700 mm Max. load per pair of beams: 3,000 kg with evenly distributed load 02x safety pins, used Material color: Sendzimir galvanized For securing the cross beams against unintentional lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply. These costs can be requested from us separately, depending on the delivery location and scope.

Stanje: dober (rabljeno), Leto izdelave: 2007, Pripomočki Eckold ECKOLD - FWR1307X Orodje za raztegovanje za MAX. 6 mm MACH-ID 3811 Proizvajalec: ECKOLD Tip: FWR1307X Orodje za raztegovanje za MAX. 6 mm Leto izdelave: 2007 Crsdpfxszdgb Io Anuoh Prosimo, upoštevajte: Podatke na tej strani smo po svojih najboljših močeh pridobili sami in, kjer je bilo mogoče, od proizvajalca. Podatki so podani v dobri veri, vendar točnosti ni mogoče zagotoviti. Posledično ne predstavljajo nikakršnih jamstev ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Csdpsmhhypefx Anuorh Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. Crjdomhh Dhepfx Anush According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth Credpfxemhhx Ie Anuoh 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Credpomhh Anofx Anueh Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. Csdpfx Ajmhhyajnuorh The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards Credemhh Dzspfx Anush - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.