Polavtomatska Krožna Žaga Za Aluminij nakup rabljenega (92.674)

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 600 HA 90°, Semi-automatic The semi-automatic circular saw UK 600 HA 90° is an upcut machine, primarily used for cutting profile material made of cast aluminum, copper, and hard plastics (solid material only to a limited extent). The machine stands out for its simple operation and quick, convenient material changes. Please note that only 90° cuts are possible with this machine! The saw feed is automatic via push button. Material clamping is done by two pneumatically operated vertical and two horizontal clamping cylinders. The standard equipment includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Ports for a chip extraction system are provided. In addition, the machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic system for lifting the safety hood. Equipment: - Large worktable, powerful drive motor - Two-button control for initiating the cutting process (optional single-button control available) - Clearly arranged control panel - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material support jaw can be moved backwards to increase cutting capacity - Large safety hood fully covers the working area - Minimum quantity lubrication system with 2-liter reservoir - Adjustable blade/feed rate - Air gun for cleaning the machine - Saw blade diameter: 600 mm Operation Sequence: 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed 4. Bring the clamping cylinders up to 20 mm near the material 5. Clamp the material 6. Press the start button; the machine is ready for operation 7. Press and hold both SAW buttons; the material will be cut 8. At the end of the cycle, release both SAW buttons and press the STOP button 9. Open the clamp and remove or advance the material Technical data such as cutting range, output, etc. (see data sheet in email attachment). We look forward to your inquiry! Plantec Maschinen GmbH Isdspa Nxdopfx Adgsba

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw UK 650 HA, Semi-automatic Ibsdpfeidun Dox Adgoa The semi-automatic circular saw UK 650 HA is an upcut machine primarily used for cutting profile materials made of aluminum castings, copper, and hard plastics (solid material only to a limited extent). The machine is distinguished by its user-friendly operation, quick and convenient material changeover, and easy miter angle adjustment. The UK 650 HA features a continuously adjustable miter range to the left and right up to 20° (pivoting range twice 70°). The saw feed operates automatically at the press of a button, while material clamping is achieved via two pneumatically controlled vertical and two horizontal clamping cylinders. Standard equipment includes a minimum quantity lubrication system and an air gun for cleaning the machine! This machine is also fitted with connections for a chip extraction system. Furthermore, optional accessories include a digital miter angle display, a marking laser, and a pneumatic device for lifting the safety hood. Equipment: - Double miter 20° – 90° – 20°, large support table - High-performance main drive motor - Two-button control for initiating the sawing cycle (optional one-button control available) - Clearly arranged control panel - Adjustable blade/feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lifting with oil level indicator - Fixed material fence can be repositioned to the rear to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade ø 650 mm Operating Procedure: 1. Set the cutting angle 2. Insert the material 3. Adjust the lift speed 4. Bring the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. By pressing the start button, the machine is ready for operation. 7. Press and hold both SAW buttons; the material will be cut. 8. Upon cycle completion, release both SAW buttons and press the STOP button 9. Open the clamping vise and remove or advance the material You are welcome to visit and view the desired system in our manufacturing/demo hall at any time. Please feel free to contact us regarding this matter. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for cutting profile materials made from cast aluminum, copper, and hard plastics (limited suitability for solid material). The machine is characterized by its user-friendly operation, quick and convenient material changes, and easy miter adjustment. The UK 352 HA features a stepless miter range adjustable from left up to 45° and right up to 0°. Saw feed is automatic at the press of a button, while material clamping is provided by two pneumatically operated vertical clamping cylinders. Standard equipment includes a minimum-quantity lubrication system and an air spray gun for machine cleaning! Connections for a chip extraction system are provided as standard. Equipment • Precision under-table circular saw • Miter adjustment: left 45º / 90º / right -45º • Includes 2 pneumatic vices (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction device • Mist lubrication system for air-oil cooling • Air gun with spiral hose • Includes maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included in the scope of delivery! You are welcome to inspect the desired machine in our production/demonstration hall at any time. Please do not hesitate to contact us. Ibodpfx Adsgwt Rrjgea We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK-400-A is an “upcut” machine, primarily used for cutting profiles made of cast aluminum, copper, and hard plastics (solid material to a limited extent). The machine is characterized by its intuitive operation, quick and convenient material changes, and easy mitre angle adjustment. The UK-400 A features a continuously adjustable mitre range to the left and right up to 20° (swivel range two times 70°). The saw feed is automatic and activated by pressing a button, while the material is secured by two pneumatically operated vertical and horizontal clamping cylinders each. The standard configuration for this machine includes a minimum quantity lubrication system and an air spray gun for cleaning the machine! Connections for a chip extraction system are provided. Additionally, this machine can optionally be equipped with a digital mitre angle display, a marking laser, and a pneumatic device for lifting the protective hood! Equipment • Precision under-table circular saw Iedpfsgwt Rnsx Adgjba • Continuously adjustable mitre angles: 0º/45º/90º/-45º/-60º • including 2 pneumatic clamps (vertical) • Infinitely variable saw blade feed • Two-hand safety operation • Adjustable rear material stop • Chip extraction device for chip extraction system • Mist spraying unit for air-oil cooling • Air gun with spiral hose • Including maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height: 130 mm • Saw blade: 400 mm • Saw blade not included! You are welcome to inspect the desired unit at any time in our production/showroom facility. Please feel free to contact us. We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an “upcut” machine, predominantly used for separating profile materials made of cast aluminum, copper, and hard plastics (to a limited extent, solid materials). The machine is distinguished by its user-friendly operation, rapid and convenient material change capability, and easy mitre angle adjustment. The UK 352 HA offers a continuously adjustable mitre range of up to 45° to the left and 0° to the right. The saw feed is automatically driven at the push of a button, and material clamping is performed by two pneumatically operated vertical clamping cylinders. As standard, this machine comes equipped with a minimum quantity lubrication system and an air spray gun for cleaning the machine. The machine is prepared for connection to a chip extraction system. Features • Precision under-table circular saw • Mitre adjustment: left 45°, 90°, right -45° • Includes 2 pneumatic vertical clamps • Infinitely adjustable saw blade feed • Two-hand safety control system • Adjustable rear material stop • Extraction system for chip extraction unit • Mist spray system for air-oil cooling • Air gun with spiral hose • Maintenance unit with pressure regulator included Ibodpfsgwt Ryex Adgja • Ergonomically arranged control panel • Max. cutting height 125 mm • Saw blade Ø 350 mm • Saw blade not included! We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, pritisk: 6 letvica, The semi-automatic circular saw UK-600-A is an “upcut” machine, primarily used for cutting profile materials made of aluminum casting, copper, and hard plastics (to a limited extent, also solid material). This machine is characterized by its ease of operation, quick and convenient material change, and straightforward miter angle adjustment. The UK-600 A features a continuously adjustable miter range of up to 20° to the left and right (swivel range of two times 70°). Saw feed is automatic at the push of a button, while material clamping is performed by two pneumatically controlled vertical and horizontal clamping cylinders each. As standard, this machine comes equipped with a minimum quantity lubrication system and an air blow gun for machine cleaning. Connections for a chip extraction system are also provided. Additionally, this machine can optionally be equipped with a digital miter angle display, a line laser, and pneumatic hood lifting. Features: • Precision underfloor circular saw • Stepless miter adjustment 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Continuously adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Extraction system—chip extraction connection • Mist spray device for air-oil cooling • Air gun with coiled hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Maximum cutting height 230 mm • Saw blade 600 mm • Saw blade not included! You are welcome to view the desired unit at any time in our production/showroom. Please contact us for an appointment. Isdpfxogcbwge Adgsba We look forward to your inquiry! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 500 HA is an “upcut” machine, predominantly used for cutting profile materials made of aluminum cast, copper, and hard plastics (suitable for solid material to a certain extent). The machine stands out for its ease of use, fast and convenient material change, and simple mitre angle adjustment. The UK 500 HA offers a continuously adjustable mitre range from 30° to the left up to 0° to the right. The saw feed is automatically operated by pressing a button, while material clamping is achieved with two pneumatically controlled vertical and horizontal clamping cylinders each. The standard configuration of this machine includes a minimal lubrication system and an air blow gun for cleaning the machine! Connections for a chip extraction system are provided on this machine. Ibedpegwt R Dofx Adgja Features • Precision underfloor circular saw • Continuously adjustable mitre adjustment at 0º/ 45º/ 90º/ -45º / -60º • Includes 2 pneumatic clamps (vertical) • Saw blade feed continuously adjustable • Two-hand safety control • Adjustable rear material stop • Chip extraction device for suction unit • Air-oil mist lubrication unit • Air gun with spiral hose • Includes maintenance unit with pressure regulator • Ergonomically arranged control panel • Max. cutting height 180 mm • Saw blade 500 mm • Saw blade not included in delivery! You are welcome to inspect the desired machine at any time in our manufacturing/demonstration hall. Please feel free to contact us. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminum Circular Saw BC 450 HA, Semi-automatic (MG FRONT-450) Iodepa Nxajpfx Adgoba The BC 450 HA is a double miter saw with a swiveling range of 45° to the left and 22.5° to the right and automatic miter adjustment via stop functions. The saw feed operates automatically, and the material is clamped pneumatically. The saw blade (450 x 30 mm) operates horizontally. Additionally, this machine can optionally be equipped with a digital miter angle display, a marking laser, and a pneumatic safety guard lifting system! Features - Double miter saw with a powerful drive motor - Two-button control for triggering the sawing cycle (optionally also available as a single-button control) - Large miter range from -22.5° to +45°, swivel range 67.5° – 0° – 45° - Automatic miter adjustment, fixed stop functions at -45° / 90° / +45°, plus two variable stop functions adjustable to the desired angle! - Two horizontal pneumatic clamping cylinders - Clear and accessible control panel - Large safety guard covering the entire working area, lifted pneumatically - Adjustable blade feed rate - Connections for extraction system - Minimum quantity lubrication system - Air gun for machine cleaning - Saw blade diameter 450 mm Operating Process 1. Set the cutting angle 2. Insert the material 3. Adjust the feed rate 4. Move the clamping cylinders to within 20 mm of the material 5. Clamp the material 6. The machine is ready for operation by pressing the start button 7. Press and hold both SAW buttons to cut the material 8. Upon completion of the cycle, release both SAW buttons and press the STOP button 9. Open the clamping device and remove or advance the material Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, Aluminium Circular Saw UK 800 HA, Semi-Automatic The semi-automatic circular saw UK 800 HA is an upcut machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (limited suitability for solid materials). The machine is characterized by its easy operation, quick and convenient material change, and simple mitre angle adjustment. The UK 800 HA offers a continuously adjustable mitre range to the left and right up to 20° (swivel range of two times 70°). The saw feed is actuated automatically at the press of a button; material clamping is provided by two pneumatically controlled vertical and two horizontal clamping cylinders. A minimum quantity lubrication system and an air blow gun for machine cleaning come as standard equipment! The machine is also equipped with connections for a chip extraction system. Additionally, optional features include a digital mitre angle display, a laser marking system, and pneumatic lifting for the safety hood. Equipment - Double mitre 20° – 90° – 20°, large support table - High-performance drive motor - Two-button control for saw activation (optional one-button control available) - Clear control panel - Adjustable blade feed rate - Two vertical and two horizontal pneumatic clamping cylinders - Hydropneumatic saw blade lift with oil level indicator - Fixed material stop can be moved backward to increase cutting capacity - Large safety hood covering the entire work area - Minimum quantity lubrication system with 2-liter reservoir - Air gun for cleaning the machine - Saw blade diameter: 800 mm Workflow 1. Set the cutting angle 2. Insert the material 3. Adjust the lifting speed Ibodpfx Adeidun Ijgoa 4. Move the clamping cylinders up to 20 mm from the material 5. Clamp the material 6. Press the START button to ready the machine 7. Press and hold both SAWING buttons to initiate cutting 8. After the cycle, release both SAWING buttons and press the STOP button 9. Open the clamping vice and remove or advance the material You are welcome to inspect the desired equipment at any time in our production/showroom. Please feel free to contact us for an appointment. Plantec Maschinen GmbH

Stanje: novo, Leto izdelave: 2026, The semi-automatic circular saw UK 352 HA is an "upcut" machine, primarily used for cutting profile materials made of cast aluminum, copper, and hard plastics (solid material possible to a limited extent). The machine stands out due to its user-friendly operation, quick and convenient material change, as well as easy mitre angle adjustment. The UK 352 HA offers an infinitely adjustable mitre range from 45° left to 0° right. Saw feed is automatic at the press of a button, and material clamping is provided by two pneumatically operated vertical clamping cylinders. As standard, the machine comes equipped with a minimum-quantity lubrication system and an air blow gun for machine cleaning! Connections for a chip extraction system are also available on this machine. Equipment • Precision under-table circular saw • Mitre adjustment: 45º left / 90º / 45º right • Incl. 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable rear material stop • Chip extraction device interface • Mist spraying system for air-oil cooling • Air gun with spiral hose • Incl. maintenance unit with pressure regulator • Ergonomically arranged control panel Iodegwt Rvepfx Adgoba • Max. cutting height: 125 mm • Saw blade: 350 mm • Saw blade not included! You are welcome to view the desired machine at any time in our production/showroom. Please feel free to contact us. Plantec Maschinen GmbH

Stanje: novo, Krožna žaga Profilma 502, reprezentativna za raznoliko serijo »Profilma« idealna za proizvodnjo oken in fasad, avtomobilsko industrijo, strojno in opremijsko industrijo, fotovoltaiko/solarne sisteme itd. • za aluminijaste in plastične profile • popolnoma avtomatizirano upravljanje • krmilnik Siemens S7 z zaslonom na dotik, vključno s števcem izdelkov • diagnostika napak, vključno z usmerjevalnikom IXON za VPN-povezavo • množitelj količin za uporabo svežnjev materiala • prikaz časa cikla v sekundah • za uporabo žagastih listov premera Ø 550 mm • pogon 7,5 kW, S6, 400 V, 50 Hz, 2.850 vrt/min • motorizirano podajanje žage, rezanje žage od spodaj • razširitev rezalne plošče na obeh straneh žagastega lista • enota za podajanje materiala s krogličnim vijačnim mehanizmom in servomotorjem • dolžina podajanja: 3–800 mm • drsna sani z dvižno in spuščeno podporno valjčno • povratna naprava do dolžine segmenta največ 4,0 m • samodejni izklop prek končnega stikala ob koncu žaganega materiala • ostanki od 75 mm (odvisno od profila) Osnovni stroj je na voljo tudi kot avtomat za žaganje, vrtanje in navojno rezanje ali kot avtomat za žaganje in izsekovanje. S hitrostjo in učinkovitostjo ter natančnostjo in visokim številom izdelkov boste hitro in učinkovito izvedli naročila. Ibsdpfx Adszlr Rcjgsa Druge avtomatizirane krožne žage, tudi za večje dimenzije profilov ali drage materiale, so na voljo v preizkušenem standardnem programu Pressta-Eisele. Na podlagi vaših specifikacij obdelave vam z veseljem svetujemo!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 5.000 mm, dolžina podajanja os X: 500 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.800 obr/min, priključek za stisnjen zrak: 7 letvica, Brez najnižje cene – zagotovljen prodaja po najvišji ponudbi! TEHNIČNE PODROBNOSTI Premer žage: 500 mm Število vrtljajev: 2.800 vrt/min Isdpfx Aezqbltedgoba Dolžina podajanja na cikel: 5.600 mm Kot reza: 90° Funkcija nagiba glede na konfiguracijo stroja PODROBNOSTI O STROJU Primerni materiali: aluminijasti profili, tankostenični profili iz lahke kovine, profili za okna in vrata Napajanje: 230/400 V, 3~ Frekvenca: 50 Hz Priključek za stisnjeni zrak: 7 bar OPREMA Odsesavanje žagovine

Stanje: dober (rabljeno), Leto izdelave: 1994, obratovalne ure: 1.000 h, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 550 mm, Obseg rezanja okroglega jekla pri 90°: 200 mm, vrsta vhodnega toka: Klimatska naprava, vrtljajska hitrost (min.): 2.800 obr/min, največja hitrost vrtenja: 2.800 obr/min, skupna masa: 1.000 kg, premer rezanja: 200 mm, Zelo malo rabljena aluminijasta krožna žaga z merjenjem dolžine na valjčni progi ZNAMKE ELUMATEC POGON S KOMPRESORJEM Premer žaginega lista 550 mm Maksimalna dolžina reza 200 mm pri 90 stopinjah Iodpfx Adszavzvsgjba Ponudba vključuje valjčne proge in merjenje dolžine Viličar za nakladanje na voljo

Stanje: novo, premer žaginega lista: 550 mm, maks. debelina aluminijaste pločevine: 4 mm, skupna dolžina: 1.130 mm, skupna širina: 980 mm, skupna višina: 1.430 mm, Obseg rezanja okroglega jekla pri 90°: 155 mm, Razpon rezanja okroglega jekla pri 45°: 130 mm, vrtljajska hitrost (min.): 3.580 obr/min, največja hitrost vrtenja: 3.580 obr/min, The Gerd Wolff AC 550 is an automatic aluminium cutting machine, manufactured in Turkey by a renowned producer for our distribution brand "GERD WOLLF Maschinenfabrik". CUTTING CAPACITIES: Ibsdpfjxb Urnox Adgsa Cutting range at 90° round: 155 mm Cutting range at 90° square: 155 x 155 mm Cutting range at 90° rectangular: 260 x 200 mm Cutting range at 45° round: 130 mm Cutting range at 45° square: 130 x 130 mm Cutting range at 45° rectangular: 180 x 200 mm Standard equipment: - Index points for 15° – 22.5° – 30° – 45° – 67.5° - Locking handle for securing at intermediate angles - Adjustable cutting speed for different profile types - Saw guard with safety interlock - Belt-driven saw - Two-hand safety operation - Easy-to-change saw blade - 2 x pneumatic vertical cylinders with clamps - 1 x pneumatic air gun Optional equipment: - Hydrocheck – hydraulic speed adjustment for aluminium profiles - Coolant system for aluminium cutting - Auxiliary conveyor with measuring scales

Stanje: novo, premer žaginega lista: 400 mm, maks. debelina aluminijaste pločevine: 4 mm, skupna dolžina: 720 mm, skupna širina: 760 mm, skupna višina: 1.330 mm, Obseg rezanja okroglega jekla pri 90°: 120 mm, Razpon rezanja okroglega jekla pri 45°: 100 mm, vrtljajska hitrost (min.): 3.000 obr/min, največja hitrost vrtenja: 3.000 obr/min, Gerd Wolff AC 400 je avtomatski stroj za rezanje aluminija, ki ga za našo prodajno znamko »GERD WOLLF Maschinenfabrik« izdeluje priznani proizvajalec iz Turčije. Standardna oprema Vpenjalne točke za 15° - 22,5° - 30° - 45° - 67,5° Zatezni ročaj za fiksiranje pri vmesnih kotih - Nastavljiva hitrost rezanja za različne tipe profilov - Pokrov žage z varnostnim stikalom - Žaga s pogonom na jermen - Dvoročna varnostna upravljalna enota - Enostavna menjava žaginega lista - 2 x pnevmatski vertikalni cilindri s sponami - 1 x pištola za stisnjen zrak Opcijska oprema - Hydrocheck – hidravlično prilagajanje hitrosti za aluminijaste profile - Hladilni sistem za rezanje aluminija - Pomožni transporter z merilnimi letvami Ibsdpexb Ur Usfx Adgea

Stanje: dober (rabljeno), Leto izdelave: 2012, premer žaginega lista: 250 mm, dolžina podajanja os X: 250 mm, skupna dolžina: 1.400 mm, skupna širina: 1.200 mm, skupna višina: 2.400 mm, vrtljajska hitrost (min.): 1.400 obr/min, največja hitrost vrtenja: 5.360 obr/min, skupna masa: 450 kg, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Avtomatska precizna žaga za aluminij +/- 0,02 mm, letnik 2012, premer žaginega lista 250 mm, zmogljivost rezanja Ø 3-65 mm, motor 2,5 kW, dolžina podajanja 250 mm, SIEMENS Simatic HMI, z visokimi obrati, minimalno olje/zrak mazanje, posebne čeljusti 2-30 mm za enojno ali dvojno vpenjanje, dovajalna proga dolžine 3 m, nastavljiva po višini, LED svetilka za stroj, opozorilna luč na stroju, 10 rezervnih žaginih listov, navodila za uporabo. Ibodpfx Ajyyl Hpedgea

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, skupna masa: 580 kg, Precision Aluminium Circular Saw VELOX 350 VA-MPS Hydropneumatic Fully Automatic For saw blades up to 350 mm diameter, mitre cuts left/right up to 45°, and bevel cuts up to 45° left. Cutting capacity: - 90°: 120 mm round, 105 mm square, 200 x 80 mm flat - 45° left: 65 mm round, 60 mm square, 180 x 50 mm flat - 45° right: 115 mm round, 100 mm square, 150 x 80 mm flat Standard features: • State-of-the-art microprocessor control with multifunction display • Safety package including: 1. Inlet minimum pressure monitoring 2. Vise monitoring / material clamping • Hydropneumatic saw head control Ibodpfjzpxh Nox Adgja • Pneumatic dual clamping device • Pneumatic vertical clamping device • Electro-pneumatic material feed unit • Vernier scale for precise length adjustment • Integrated coolant spray unit • Connection for chip extraction system Speed: 3600 rpm

Stanje: rabljeno, Leto izdelave: 2007, Technical data: Speed: 2800 rpm Saw blade: ø 380 mm Ibsdpfxerwlwvj Adgoa Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (W x D x H), approx.: 1760 x 800 x 1680 mm

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 520 mm, CNC-controlled double-head mitre circular saw machine with electronic saw unit swiveling A high-performance circular saw designed for precise and efficient cutting of aluminium profiles, non-ferrous metals, and various plastics. Ibedezhkazjpfx Adgoa The machine can be used for single cuts—utilizing both saw heads simultaneously to cut the profile—or in automatic mode, where the double-head saw functions as a single-head saw automaton. Electronic mitre adjustment of the saw heads. Mitre angles infinitely programmable between 20° and 135°. Saw blade drive power: 2 x 2.2 kW Saw blade diameter: Ø 520 mm Max. cutting length with both saw heads simultaneously: 4,000 mm or 5,000 mm Max./min. cutting length in automatic mode: unlimited (the profile is pushed and pulled) Length of infeed roller conveyor: 2,300 mm Maximum required floor space: approx. 7.2/8.2 m (saw unit fully to the right) x 1.25 m x H 1.6 m Weight: approx. 1,500 kg / 1,700 kg - CNC control with touch-screen and color graphics on a movable operator panel - Import and export of CSV / LTE files (for loading cutting lists from an external CAD software) - Graphical profile display Optionally equipped with a label printer.

Stanje: rabljeno, Kapna in kotna žaga za aluminij EISELE tip LMS II HVG-225 Št. stroja: 0107, Letnik: 1980 Območje žaganja 90° = 150 x 100 mm 45° = 120 x 100 mm Maksimalni premer žaginega lista: 400 mm Kotni rez: +/- 45° Hitrost vrtenja žaginega lista: 1700 / 3400 1/min Iedpfx Adezinzrjgsba Moč motorja: 1,4 / 1,9 kW Električni priklop: 380 V, 50 Hz Velikost mize pred kotnim prislonom: 580 x 350 mm - Motor tip RF 1,5 / 4 / 2-7 - Žagalni agregat nagiben za šifterski rez 45° levo - Stroj opremljen z žaginim listom za aluminij Ø 400 mm - Priključek za cev za odsesavanje odrezkov Ø 80 mm - Stabilno kovinsko ogrodje Potrebna površina D x Š x V: 1050 x 1020 x 1700 mm Teža: 150 kg V dobrem stanju

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 350 mm, skupna dolžina: 1.000 mm, skupna širina: 1.150 mm, skupna višina: 1.550 mm, Obseg rezanja okroglega jekla pri 90°: 125 mm, skupna masa: 620 kg, hitrost žaginega lista: 2.800 obr/min, dolžinski omejevalnik: 2.000 mm, ALU circular saw semi-automatic, saw blade Ø 350 mm, cutting capacity Ø approx. 125 mm, motor 3.7 / 4.5 kW, 2-speed 1420/2880 rpm, vertical clamp, stops at 30°, 45°, 60° and 90° on both sides, saw blade; dimensions 100x115x155 cm, approx. 600 kg Isdpfxetqfvyo Adgeba

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 499 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1587 / 1588, premer žaginega lista: 500 mm, This model combines precise cutting to length with integrated punching operations, making it ideal for complex manufacturing processes: Saw unit: Equipped with a saw blade diameter of 500 mm. The drive is provided by a 7.5 kW motor (400 V) with infinitely variable speed control. Punching unit: Features a hydraulic punching unit on the discharge side with a punching force of 250 kN. The punching direction is vertical from above, and up to 8 profile punching tool cassettes can be used simultaneously. Material feed: The feed is managed via a ball screw and a servomotor, with a maximum feed length of 400 mm per individual stroke. Control: Modern variants often utilize a Siemens S7 control system with a touch display for intuitive operation and precise programming. The machine is built for continuous industrial use and has the following physical characteristics: Weight: approx. 1,000 kg to 1,500 kg (depending on configuration). Dimensions (saw): approx. 2,100 x 2,000 x 1,600 mm (LxWxH). Hydraulic unit: approx. 900 x 600 x 800 mm. 2 machines in stock. ----- Ibsdpjyyz Txsfx Adgsa Attractive offer – flexible & worry-free We not only offer you a high-quality product, but also tailor-made financing options to suit your needs. Whether down payment, installment payments, or individual financing models – together we will find the right solution for you. On request, we also handle complete transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you have nothing to worry about. 📞 Please feel free to contact us for further information or a non-binding quotation. We provide you with personal and expert advice. Interim sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 450 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1589 / 1590, premer žaginega lista: 500 mm, Fully Automatic Sawing and Punching System for Aluminium and Plastic Profiles The Profilma 502 ST - V combines precise sawing and punching in a continuous, automated work process. Based on the proven Profilma 502 model, this machine is ideal for high production volumes, complex machining operations, and processing of bundled materials. Control is handled via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnosis. An IXON router provides secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. Sawing Range & Feed: 500–550 mm saw blades Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Infinitely variable speed regulation Saw cut from below, motorized feed Material feed: 3–800 mm, reversible up to 4,000 mm Ballscrew with servo drive and round-shaft guide Remnant piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching Unit: Vertical hydraulic punching unit (outfeed side) with automatic oil cooling Punching force: 300 kN Stroke: 20 mm Double-stroke cycle time: 2–3 seconds Punch scrap ejection into frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, reduced pressure) 3 chip extraction ports, Ø 100 mm, volt-free contact for extraction control Minimum quantity lubrication system with 2x 3-liter tank and fill level display Noise reduction package: hood and internal saw blade guard insulated Roller conveyor (740 mm) with operator protection on infeed side Sturdy stationary machine frame, working height: 960 mm Manually operated safety hood Saw blade housing located below table surface Max. Cutting Range: Profile height: up to 65 mm Profile width: up to 170 mm Technical Data: Ijdpfx Aoyyz Ebjdgoba Dimensions (W × D × H): approx. 311 × 153 × 197 cm 2 machines available ----- Attractive Offer – Flexible & Worry-Free We offer not only a high-quality product but also tailor-made financing options that suit your needs. Whether down payment, installment plan, or individual financing models – together we’ll find the right solution. On request, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. Our advice is personal and professional. Subject to prior sale, changes and errors excepted!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2023, obratovalne ure: 67 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1591 / 1592, premer žaginega lista: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automated process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Control is managed via a Siemens S7 system with touch display, piece counter, cycle time indicator, and integrated fault diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. The horizontal punching unit can be deactivated if needed. Sawing range & feed: 500–550 mm saw blades Ijdjyyzxhspfx Adgjba Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm Continuously variable speed control Up-cut sawing, motorized feed Material feed: 3–800 mm, reversing up to 4,000 mm Ball screw spindle with servo drive and round shaft guide Offcut: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching unit: Vertical and horizontal hydraulic punching (discharge side) with automatic oil cooler Punching force: 2 × 150 kN Stroke: ≤ 20 mm Vertical stroke infinitely adjustable (also suitable for embossing) Horizontal punching cylinder can be switched off separately Double-stroke cycle time: 2x 2–3 seconds Punch waste is discharged laterally from the machine frame Conveyor belt 250 × 800 mm for parts removal Equipment: 2 pneumatic clamping cylinders (vertical, pressure-reduced) 3 chip extraction nozzles Ø 100 mm, potential-free contact for extraction control Minimum quantity spray unit with 2x 3-litre tanks and level indicators Noise protection package: hood and saw blade guard with internal insulation Roller conveyor (740 mm) with reach-in protection on infeed side Sturdy stationary frame, working height: 960 mm Manually opening safety hood Saw blade housing below the tabletop Max. cutting range: Profile height: up to 65 mm Profile width: up to 135 mm Technical data: Dimensions (W × D × H): approx. 311 × 153 × 197 cm A total of 2 units available. ----- Attractive offer – flexible & worry-free We offer not only a high-quality product, but also tailored financing options that suit your needs. Whether it’s a down payment, installment plan or individual financing models – together, we’ll find the right solution. On request, we can also handle the complete transport logistics. From planning to reliable delivery, we ensure a smooth and punctual process so you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding offer. We provide personal and competent advice. Subject to prior sale, changes and errors excepted!

Stanje: dober (rabljeno), Premer žaginega lista: 400 mm Premer reza: 130 mm Območje reza pri 90 stopinjah: ploščato 260 x 60 mm Območje reza pri 90 stopinjah: kvadrat 105 mm Območje reza pri 45 stopinjah: ploščato 200 x 45 mm Območje reza pri 45 stopinjah: kvadrat 90 mm Območje vrtljajev, 2 stopnji: 1400 / 2800 obr./min Moč pogona, preklopni poli: 2 / 4 kW Mere stroja (D x Š x V): cca 1100 x 1100 x 1700 mm Teža: cca 850 kg Siegfried Volz Orodni stroji Rüschebrinkstr. 151-153 Ibjdsx Rvb Sspfx Adgsa DE – 44143 Dortmund - Wambel / Nemčija