Morbidelli + Mahros (Scm Group) Powerflex + Brush nakup rabljenega (6.184)

Stanje: zelo dobro (rabljeno), CNC-nadzorovana, prilagodljiva linija za obdelavo Minimalna/maksimalna širina plošče (os X) s sistemom PWX100: mm 250 / 3000 Minimalna/maksimalna debelina plošče (os Z) s sistemom PWX100: mm 12 / 60 Minimalna/maksimalna dolžina/globina plošče (os Y) s sistemom PWX100: mm 100 / 1200 (ali 600+600) Bodpjzxn N Isfx Aqtsdg A) Sistem za dovajanje (portal) "MAHROS", dvojna postaja za nalaganje, model Brush CDL B) 1. Valjčni transportni sistem "MAHROS" LS z motoriziranimi 90-stopinjskimi transportnimi trakovi (prehod iz vzdolžne v prečno smer) C) Povezovalni transport s sistemom za obračanje (180°) "MAHROS", model Rib/C HS-C D) CNC obdelovalni center (portal) za vrtanje MORBIDELLI, tip PowerFlex (PWX) 100 - Št. 6 mobilnih, CNC-nadzorovanih konzol (delovnih miz) na osi X - Št. 4 zgornje vrtalne enote - Št. 2 horizontalne vrtalne enote (1 desna + 1 leva) s po 1 vrtalno glavo s 21 vreteni (21+21 = 42) E) 2. Valjčni transportni sistem "MAHROS" TR-C z motoriziranimi 90-stopinjskimi transportnimi trakovi (prehod iz vzdolžne v prečno smer) F) Sistem za razkladanje (portal) "MAHROS", dvojna postaja za nalaganje, model Brush SDL, s čistilnim strojem "WANDRES".

Stanje: zelo dobro (rabljeno), CNC-upravljana, prilagodljiva tekoča linija za vrtanje in rezanje (razrezovanje) Minimalna/maksimalna širina plošč (os X) s sistemom PWX100: mm 250 / 3000 Minimalna/maksimalna debelina plošč (os Z) s sistemom PWX100: mm 12 / 60 Bdsdpfezxc Ncsx Aqtog Minimalna/maksimalna dolžina/globina plošč (os Y) s sistemom PWX100: mm 100 / 1200 (ali 600+600) Z avtomatskim sistemom za upravljanje s podpornimi ploščami A) Sistem za dovajanje (portal) "MAHROS", dvojna postaja za nalaganje, model Brush CF-SX/D (z avtomatskim sistemom za upravljanje s podpornimi ploščami) in z dvojim sistemom za etiketiranje WEBER B) 1. transportni sistem "MAHROS" LS z motoriziranimi transportnimi trakovi za preusmeritev za 90° (od vzdolžne do prečne smeri) C) Povezovalni transport z obratno napravo (180°) "MAHROS" model Rib/C HS-C D) CNC obdelovalni center (portal) za vrtanje MORBIDELLI, tip PowerFlex (PWX) 100 - Št. 5 mobilnih CNC-upravljanih konzol (delovnih površin) na osi X - Št. 5 zgornjih vrtalnih enot B, vsaka sestavljena iz: - 2 vrtalnih glav z vsako 30 vertikalnimi vreteni (skupno 60 na vrtalno enoto), vrtljivo od 0° do 90° (osi X in Y) - 2 horizontalnih vretena (skupno 4 na vrtalno enoto), vrtljivo od 0° do 90° (osi X in Y) Skupno 300 vertikalnih vrtalnih vreten + skupno 20 horizontalnih vrtalnih vreten (osi X in Y) - Št. 2 horizontalnih vrtalnih enot (1 desna + 1 leva) z vsako 1 vrtalno glavo z 21 vreteni (21 + 21 = 42) E) 2. transportni sistem "MAHROS" TR-C z motoriziranimi transportnimi trakovi za preusmeritev za 90° (od vzdolžne do prečne smeri) F) Sistem za razrezovanje (dolžinski rez/razdelitev) "CELASCHI", model SPL Base 2 (za razrez plošč na dva dela) Z št. 3 delovnimi skupinami. Širina plošč po razrezu (MIN 70+70 mm; MAX 600+600 mm) G) Sistem za odlaganje (portal) "MAHROS", dvojna postaja za nalaganje, model Brush SSL/D (z avtomatskim sistemom za upravljanje s podpornimi ploščami), z čistilnim strojem "WANDRES".

Stanje: zelo dobro (rabljeno), GANTRY LOADER with DOUBLE LOADING STATION Gantry Machine (Bridge Type), part of the line (SOFIT Code: W05025) Vacuum system (including pump) No. 2 Vertical columns supporting the top crossbeam No. 1 Top horizontal crossbeam (for movement of mobile carriage) No. 1 Motorized mobile carriage to which horizontal arms are connected No. 2 Adjustable horizontal metal arms with vacuum suction cups No. 2 Floor rollers for feeding panel stacks into the Loader No. 1 Motorized roller table supplying panels to the Unloader Separate electrical control panel MAGELIS PLC electronic control Bodpjyywi Asfx Aqtjdg Metal perimeter safety guarding Working capacity (cycles/minute): approx. 15-18 Min/max panel thickness: approx. 10-60 mm Minimum panel size: approx. 210 x 230 mm Maximum panel size: approx. 1200 x 3200 mm Installed power: kW

Stanje: zelo dobro (rabljeno), CNC-OBDELAVALNI CENTER S 3 OSMI (X-Y-Z) Gibljiva plošča (obdelovanec), gibljiva obdelovalna glava Vertikalna plošča (obdelovanec) Krmilnik MAESTRO konzola "eye-M PRO" Programska oprema "3D PROBE" za samodejno preverjanje dimenzij plošč Varnostna kabina obdelovalne glave Št. 2 vpenjal za pritrditev plošč Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 50 x 8 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 1300 x 95 Skupna priključna moč (A) 43 DELOVNE SKUPINE: Št. 1 Vrtalna enota (5 strani s tehnologijo Ro.Ax. – rotacijsko-aksialna tehnologija) F31LTC (moč kW 3,9) z vreteni: Bedszx Dvdepfx Aqtedg - Št. 21 neodvisnih vertikalnih vreten - Št. 10 neodvisnih horizontalnih vreten (6 v osi X + 4 v osi Y) - Št. 3 neodvisnih vreten (za tečaje) Št. 1 Enota za krožno žago (za obdelavo v osi X), premer (mm) 125 Št. 1 vertikalno glavno vreteno (rezalna enota) HKS63 (moč kW 7,5) Samodejni sistem za menjavo orodij – mesta v skladišču (št. 6 mest za orodja)

Stanje: zelo dobro (rabljeno), Popolna proizvodna linija za pohištvo, sestavljena iz naslednjih glavnih strojev: 293000) Fleksibilna linija za obdelavo robov in formatiranja „HOMAG“ KFL (z visoko zmogljivim paketom) 239100) Fleksibilna CNC-perforacijska linija „MORBIDELLI+MAHROS“ PowerFlex s sistemom CELASCHI za odstranjevanje odrezkov 231200) Fleksibilna CNC-perforacijska linija „MORBIDELLI+MAHROS“ PowerFlex 238000) Fleksibilna CNC-perforacijska linija „MORBIDELLI+MAHROS+RBO“ Flexa 912 238400+200027) 2 x fleksibilna CNC-perforacijska linija „MORBIDELLI+MAHROS“ Author 912/924 231200 Fleksibilna CNC-perforacijska naprava „COMEC+KUKA“ Frontal za fronte 214000) Digitalna tiskarska naprava „PROJECTA+GIARDINA+UNIVERSAL+KUKA“ 200002) Linija za nanašanje prevlek (obdelava površin) „HYMMEN-KONTRA“ 200037) Proizvodna linija za fronte/predale (5 kosov) „OMGA+BALESTRINI+GANNOMAT+DOUCET“ Bedpfezwk Idjx Aqtsdg 200006) Ploščna krojna žaga „HOLZMA“, model HPL 400/43, z robotskim sistemom KUKA za razkladanje in zlaganje 237100+237200) 2 x CNC-obdelovalni center „BIESSE“ Skipper 130 + 237000+200028) 2 x CNC „BIESSE“ Skipper 100 237300+200078) 2 x CNC-obdelovalni center „MORBIDELLI“ CX 200 + CX 210 200034+200033) 2 x CNC-obdelovalni center za vrtanje in vstavljanje lesenih čepov „KOCH+BIESSE“ Sprint PTP + HELIX K3 200029 + 200030) 2 x CNC-obdelovalni center za obdelavo po principu "nesting" „BIESSE“ Rover A FT 1531 (1 z napravo za dovod in odvod materiala) 200031A + 200032A) 2 x CNC-obdelovalni center „BIESSE“ Rover B 1967 Edge (z robotskim sistemom KUKA) 200035) CNC-obdelovalni center „BIESSE“ Excel (4 vertikalne elektrovretena) za fronte 220700) Stroj za obdelavo robov „HOMAG“ KAL 330 (z napravo LIGMATECH za vračanje obdelovancev) 200009+200010) 2 x stroji za obdelavo robov „SCM“ STEFANI XD (1 z napravo za vračanje obdelovancev) 200018+200019) 2 x stroji za obdelavo robov „HOMAG-BRANDT“ KDF 440 C in KDF 650 261200 + 261300) 2 x linije za pakiranje v kartonske škatle „DYNATEC+ROBOPAK+KUKA“ 2VAC01 + 2VAC02) Sesalni sistemi (AIREX, TECO Westinghouse, Ingersoll-Rand) In še veliko drugih strojev (različni kompresorji podjetij ATLAS COPCO in INGERSOLL RAND, stroji za obdelavo robov podjetja HOMAG KL/KR, ploščne žage podjetij HOLZMA in SELCO, embalažni stroji podjetja ROBOPAC) ter transportni sistemi, police itd. Stroji so še vedno nameščeni pri prejšnjem uporabniku in jih je mogoče ogledati po dogovoru.

Stanje: rabljeno, Complete, highly productive, and flexible drilling line with automatic loading and unloading system General technical data: Bdedjv N Hifjpfx Aqteg - Panel width: min. 250 mm, max. 3000 mm - Panel depth: min. 100 mm, max. 900 mm - Panel thickness: min. 12 mm, max. 60 mm - Maximum panel weight: 50 kg - Worktop height: 1060 mm - Linear speed of the panel conveyor (frequency inverter controlled): 20 – 95 m/min - For panel weights over 50 kg, the speed must not exceed 50 m/min - Line production capacity: up to 25 pieces per minute Technical data of numerical control and line management: - Numerical control: TPA – Albatros – CNC 2000 - EASYTOOL software for creating and modifying machine tooling. Allows defining the arrangement of tools mounted on each drilling machine within a single file. Files created by Easytool are further processed by the machine line optimizer to balance workloads along the production line. Line comprises the following machines: * Double-cell automatic loader by MAHROS, model BRUSH – with motorized pre-loading rollers * Panel turner by MAHROS * Flexible drilling machine by MORBIDELLI, model POWERFLEX – No. 5 segmented lower vertical drilling heads; automatic flexible NC-controlled machines – with 26 independent spindles per head * No. 3 heads of automatic flexible segmented upper vertical drilling machine with NC control – also with 26 independent spindles per head * No. 2 horizontal drilling heads with segmented heads and 28 + 28 independent spindles each (per side; arranged on two levels) * Flexible drilling machine by MORBIDELLI, model POWERFLEX – No. 5 segmented lower vertical drilling heads; automatic flexible NC-controlled machines – with 26 independent spindles per head * No. 3 heads of automatic flexible segmented upper vertical drilling machine with NC control – with 26 independent spindles per head * No. 2 horizontal drilling heads with segmented heads and 28 + 28 independent spindles each (per side; arranged on two levels) * Automatic dowel inserting machine by MORBIDELLI * Panel turner by MAHROS * Automatic double-cell unloader by MAHROS, model BRUSH – with motorized unloading rollers and system for managing sacrificial panels

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Drilling line consisting of: 1. MAHROS - BRUSH CF loading system 2. MORBIDELLI - ZENITH F2 CDM through-feed drilling machine 3. MORBIDELLI - ZENITH F2 CDM through-feed drilling machine 4. MAHROS - BRUSH SF unloading system Machine is connected and operates daily in a single shift. The first drilling machine is equipped with: Upper vertical heads – 3 units Bjdpfxjgb D Afs Aqtsdg Lower vertical heads – 6 units Horizontal heads left + right – 2 units The second drilling machine is equipped with: Upper vertical heads – 3 units Lower vertical heads – 6 units Horizontal heads left + right – 2 units Rear horizontal heads – 6 units Below you will find detailed information about the machine and a video. It is possible to inspect the machine any day. The machine will be available in August 2021.

Stanje: rabljeno, Leto izdelave: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTION TABLE – WORK CELL VERSION X400 CELL Drilling and milling, made for you! This numerically controlled machining center comes equipped with a comprehensive range of milling/drilling tools to meet any requirements for processing wood and similar materials. - Highly efficient, equipped with drilling spindles at 8,000 rpm and the most robust spindle technology available on the market, offering more than 1,000 maintenance-free operating hours. - Superior and more comprehensively equipped: various configuration options via the multifunction table, allowing the machine to be optimally equipped according to specific requirements. Bodpovvi N Isfx Aqtjdg - Easier and more intuitive programming, thanks to the integrated Maestro CNC CAD/CAM module. - User-friendly: The work table is always accessible, the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers. Load-Bearing Structure The load-bearing structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid. The especially wide support surface was specially designed to provide the machine with maximum stability, ensuring lasting precision regardless of operating conditions, and does not require anchoring to the floor. The base forms a large and solid support for the moving gantry: the work unit is thus equipped with a balanced, stable, and highly resilient support, capable of withstanding even the most demanding stress loads, leading to improved performance quality and greater accuracy. The moving gantry is a solid single component anchored to both sides of the base and slides along prismatic guides with recirculating ball shoes of the highest quality. Dual motorization along the X-axis ensures top performance even under heavy-duty operating conditions. Movement of the lower mobile unit (X-axis) and the working unit along the beam of the mobile unit (Y-axis) is achieved via a helical rack and pinion drive. This provides greater tooth-on-tooth engagement, achieving higher acceleration as well as increased speed along the X and Y axes. The specially designed helical gearing ensures reduced wear of mechanical components and quieter operation. The vertical Z-axis is driven by a recirculating ball screw, ensuring perfect balance under dynamic loads and allowing for strong acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring the finest machining quality by eliminating vibrations. Movement along X-Y-Z axes is provided by brushless motors, powered by static inverters, delivering: - Reduced processing times thanks to improved acceleration - Greater positioning accuracy thanks to high-resolution encoders - No more reference point setup at machine startup due to absolute encoders - Eliminated general maintenance for the drive system since the brushless system contains no brushes Management of axis movements and general machine components is performed via an industrial NS module with digital D...

Stanje: rabljeno, Leto izdelave: 2016, Delovno območje X-Y-Z: 5300 x 1700 x 180 mm Dolžina giba X-Y-Z: 6040 x 1810 x 280 mm Vrtalna glava s 30 + 8 vreteni Hitrost vrtenja: 6000 1/min Moč: 2,2 kW Avtomatsko centralno mazanje Delovna miza TV s 10 oporami, L = 1500 4 delovna območja 2 križni laserji Bsdpfx Aoy Dta Seqtsdg Vakuumska črpalka, 250 m³/h Računalniško upravljanje Windows Vertikalna rezkalna enota ISO 30, 7,5 kW, z menjalnikom orodij RAPID 14 in vektorjsko osjo Dodatna vrtalna enota (os E) Ključek (dongle) za programsko opremo XILOG Lokacija skladišča: Sonnefeld

Stanje: rabljeno, Leto izdelave: 2012, SPLOŠNE LASTNOSTI Bsdpfjzrvvvjx Aqtedg CNC obdelovalni center s fiksno strojno mizo in premičnim nosilcem orodij v portalski izvedbi za vrtanje in freziranje plošč iz različnih materialov (iverne plošče, MDF, masivno les, plastika itd.). KONSTRUKCIJA STROJA Osnovna konstrukcija je monolitna izvedba iz jekla z debelimi stenami, ki je po celotni površini strojnega postelja ojačana z varjenimi deli, kar zagotavlja izjemno stabilnost. Uporabljena oblika mize z veliko podlago je skrivnost za dolgotrajno natančnost in stabilnost. Razporeditev stroja uporabniku omogoča optimalen delovni tok, kljub minimalni uporabi premičnega portala, ki je izdelan iz trdnega monobloka. V smeri X je pozicioniran na prizmatičnih, brušenih vodilih s krogličnimi grebeni. Na tem premičnem nosilcu orodij je obdelovalna enota ponovno pritrjena na prizmatičnih, brušenih vodilih in s krogličnimi grebeni. Gibanje osi je omogočeno s "brezčetačnimi" motorji v osi X/Y/Z. Pogonski sistem v osi X poteka preko vnaprej napete natančne zobate letve, v osi Y/Z pa preko brušenih krogličnih vreten z najvišjo stopnjo natančnosti. GIBANJE OSI Pomik vseh osi poteka na prizmatičnih linearnih vodilih z velikim prečnim prerezom in krogličnih grebeni z veliko površino stika, kar zagotavlja optimalno drsenje tudi pri najvišjih hitrostih in pospeških. Natančno in hitro pozicioniranje premičnega portala (osi X) poteka preko zobnika in zobate letve s poševnimi zobmi. Kroglična vretena z velikim prečnim prerezom zagotavljajo natančno pozicioniranje obdelovalne enote vzdolž premičnega portala (osi Y in Z). Popolna mehanska dinamika in maksimalna natančnost pozicioniranja sta pod nadzorom visokokakovostnih pogonov in brezčetačnih motorjev. STANDARDNA IZVEDBA STROJA Rezalnik s pozicioniranjem na 5 osi, moč 11 kW (15 KM), HSK63, 1200-20000 vrt/min. Obdelovalna enota je sestavljena iz močnega motorja z močjo 11 kW (15 KM), ki je hlajen s tekočino in omogoča pozicioniranje na 5 osi. Ta lastnost omogoča obdelavo z orodjem, ki ga je mogoče orientirati v kateri koli smeri; zato ni potrebe po uporabi številnih kotnih orodij. Osnovna konstrukcija rezkalne enote temelji na načrtu z dvema neortogonalnima osima, ki se križata poleg orodja. Ta lastnost zagotavlja robusten nosilec za težke rezkalne aplikacije. Zaradi neortogonalnih osi je mogoče izvesti številne ponovne pozicije, ne da bi pri tem porabili veliko prostora. To omogoča obdelavo kompleksnih geometrijskih oblik brez nevarnosti trčenja z obdelovancem in doseganje kota -10° glede na mizo stroja. Vse obdelave so omogočene zahvaljujoč majhni dimenziji enote glede na os vrtenja vretena: ko je enota v horizontalni legi, znaša dimenzija le 35 mm. DELOVNA MIZA Delovna miza je zasnovana tako, da uporabniku zagotavlja največjo "prostost gibanja". Sistem hitre vpenjalne plošče na podtlak omogoča največjo prilagodljivost pri natančni poziciji in optimalnem prijemu obdelovanca. Miza je sestavljena iz premičnih konzol, ki se v smeri X premikajo po brušenih vodilih s krogličnimi grebeni in imajo poseben profil za zagotavljanje ...

Stanje: rabljeno, Leto izdelave: 2011, Base Machine M800 X5 TV 1 WORKING AREA X: 5,020 mm Y: 1,830 mm Z: 675 mm Clearance height: 300 mm (from 50 mm suction cup height) MACHINE STRUCTURE The base structure is a monolithic construction made of thick-walled steel. It is reinforced across the entire machine bed with welded components, ensuring extreme stability. The large-base table design is the secret to guaranteeing long-term precision and stability. The machine’s layout allows the operator optimal workflow with minimal space requirements. The moving gantry carrier is built from a solid monoblock. It is positioned in the X-direction on prismatic ground guides with recirculating ball carriages. The working unit is mounted on this mobile aggregate carrier, also using prismatic ground guides and recirculating ball carriages. AXIS MOVEMENT All axes move on large-section prism linear guides and recirculating ball carriages with a large contact area, ensuring optimal gliding even at the highest speeds and accelerations. The precise and rapid positioning of the moving gantry (X-axis) is achieved via slanted-tooth rack-and-pinion drive. Large-cross-section recirculating ball screws guarantee the precise positioning of the working unit along the moving gantry (Y- and Z-axes). Top-quality drives and brushless motors govern perfect mechanical dynamics and maximum positioning accuracy. Maximum axis speeds: · X-axis = 90 m/min · Y-axis = 90 m/min · Z-axis = 30 m/min Safety device with bumper and light barrier 1 Bumpers with sensors are installed around the mobile support, and a light curtain system is mounted in front of the machine. If the operator enters the active zone, the X-axis travel speed is reduced to 25 m/min without stopping the machine. This system allows workpieces to be loaded during pendulum operation, without the access restrictions typical with foot mat systems. This prevents unwanted interruptions of the machining cycle and allows greater freedom of movement around the work table. CE certificate for the safety system 1 Bdodexy Tmnjpfx Aqtog Safety guard fence 1 Side and rear protective fencing Automatic central lubrication controlled by CNC 1 Lubrication of the X, Y, and Z axes is regulated by the CNC control at regular intervals, without manual intervention on the machine. Central extraction port 1 All individual extraction ports of the processing units are combined into a central port. Various slide gates within the port are controlled via NC, reducing the required extraction air flow. Chip conveyor 1 Maxi - 5 axis electrospindle 11 kW HSK-63 "Prisma K 1 5-axis electrospindle rated for 11 kW at 20,000 rpm in S1 (100% ED) Speed: max. 20,000 rpm Left/right rotation Liquid cooling Tool interface HSK 63F 18 kW inverter, stepless, constant power output Max. rotation: B-axis = 200° (+-100°) C-axis = 650° Thanks to the non-orthogonal axes, complex horizontal positioning in limited working areas is possible. This enables the machining of complex geometries without the risk of collisions.

Stanje: dober (rabljeno), Koda: 0260 Blagovna znamka: DMC SCM GROUP Model: UNISAND 2000 - CE standard Samodejni širokopasovni brusilni stroj z dvema vzdolžnima enotama in eno prečno enoto na vhodu, namenjen za brušenje pohištva, stavbnega pohištva, pohištva po meri, plošč, lesenih vrat, okenskih okvirjev, polizdelkov in raznovrstnih lesenih elementov – skladno s CE standardom. Tehnični podatki: Največja delovna širina: 1350 mm Najmanjša delovna širina: 52 mm Najmanjša dolžina obdelovanca: 400 mm Delovna višina (min./maks.): 4/170 mm Dovod traku z motorjem s spremenljivo hitrostjo Dolžina brusnega traku (vzdolžni): 1370 x 2620 mm Dolžina brusnega traku (prečni): 150 x 6550 mm Dolžina lamelarnega traku: 140 x 6300 mm Avtomatsko centriranje traku Avtomatsko pozicioniranje mize Digitalni prikaz delovne debeline Krmilna plošča z membransko tipkovnico, odporno proti prahu Elektronski sistem za nihanje traku Pritisni valji prevlečeni z gumo Avtomatsko centriranje traku 1. Skupina: Prečna brusna blazinica z dolžino 6550 mm, opremljena z lamelarnim trakom, ki zagotavlja stabilnost in odlično napetost brusnega traku Sekcijska elektronska blazinica "EPICS" z elektronskim nadzorom "HYDRA" s 46 sektorji, razmik med sektorji 30 mm LED zaslon omogoča preverjanje delovanja aktiviranih sektorjev blazinice Enota je opremljena z izpihovalci za čiščenje brusnega traku Dvomotorna moč: 12/15 kW Premer odsesovalne kapuce: 160 mm Kombinirana vzdolžna kalibracijska/brusilna skupina z jeklenim valjem in sekcijsko elektronsko blazinico "EPICS" s 46 sektorji in razmikom 30 mm Pregradna pregrada s 46 sektorji Mere brusnega traku: 1370 x 2620 mm Premer valja: 220 mm Moč motorja: 15/18,5 kW Oscilacijski izpihovalci z elektronskim nadzorom Sekcijska elektronska brusna blazinica "EPICS" s 46 sektorji in razmikom 30 mm Pregradna pregrada s 46 sektorji Moč motorja: 15 kW Oscilacijski izpihovalci Satinirni valj Scotch Brite Premer: 150 mm Moč motorja: 3 kW Premer odsesovalne kapuce: 160 mm Vakuumska miza Elektronsko krmiljenje HYDRA 35 Kompresiran zrak: 8 bar Skupne dimenzije sestavljene naprave: 3200 x 2900 x 2400 (V) mm Dimenzije za transport: 3200 x 2300 x 2400 (V) mm Bdsdpfxsx Dm Tvs Aqtsg Teža: 4400 kg

Stanje: zelo dobro (rabljeno), Dvostranska samostojna strojna enota (1. in/ali 2. strojna enota v proizvodni liniji) Debelina roba (min/maks) mm 0,4 / 3 Debelina plošče (min/maks) mm 10 (približno) / 60 Delovna širina (min/maks) mm 260 (približno) / 3200 Nadzor MAESTRO PRO EDGE / programsko opremo EYE-M Hitrost podajanja (nastavljiva) m/min 10-40 Kabina za varnost in zmanjšanje hrupa + razdalja med gredami (mm) 400 OBDELAVA ROBOV (za vsako stran): Zaščitni rezalnik (za obdelavo roba) AS (1 x Kw 4) Obdelovalni stroj DTR (2 x Kw 8) z navpično nastavitevjo s krmilnikom CN Naprava za nanašanje (za tekočo proti-lepilno snov) AAR ENOTA ZA NANAŠANJE OBROBNEGA TRAKU (za vsako stran): Predgrevalne žarnice + enota za nanašanje lepila (PU lepil + predgrevalnik) Nastavitev višine obrobnega traku, upravljanega s krmilnikom CN Območje pritiska (upravljano s krmilnikom CN) + rezervoar za obrobni trak (št. 6) – pozicioniranje obrobnega traku s krmilnikom CN Enota za obrezovanje YU/SP-750 (30 m/min) Predrezalna enota RSP Večprofilna rezalna enota (upravljana s krmilnikom CN) RI/S 2P Rezalna enota za oblikovanje (kopirna) C1+C2 (4 x Kw 0,35) ED-SYSTEM e Fast-Release Enota za rezanje profilov RAS/S Univerzalna rezalna enota za izdelavo utorov/utora in oblikovanje U (1 x Kw 5,5) na levi strani Enota za rezanje ravnih robov RCA/2C Naprava za nanašanje (za polirno tekočino) Enota za čiščenje SPE Bodpfx Aozmfg Toqtsdg

Stanje: zelo dobro (rabljeno), 4-sided DOUBLE END PROFILER LINE, currently configured for INTERIOR DOORS, Consisting of the following machines: Bdodpfx Aowzmbqsqtjg X10023A) CELASCHI powered roller conveyor for infeed X10023B) CELASCHI DOUBLE END PROFILER Model TSA 3 B 480 A Installed total power: 65 kW X10023C) CELASCHI 90° transfer (L-shaped powered roller conveyors) X10023D) CELASCHI DOUBLE END PROFILER Model TSA 2 B 360 Installed total power: 65 kW

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED SIZING AND EDGE BANDING MACHINES – First (1st) machine in a production line Edge Material (roll) Thickness (min/max) mm: 0.3 / 3 Panel Thickness (min/max) mm: 10 / 60 Working Width (min/max) mm: 230 / 1600 (approx.) Control / Software: WinEdge Feed Speed (adjustable) m/min: 10 - 30 (approx.) Protective and soundproof enclosures SIZING UNIT (per side): No. 2 Hogging units (2 x 5.8 kW approx.) No. 2 Jointing units aft (2 x 4 kW approx.) EDGE BANDING SECTION (per side): Gluing unit (Hot Melt glue + pre-melter) Bjdol Hydmepfx Aqtjdg Pressing zone (CNC-controlled) Edge magazine for rolls (slot number): 6 Pre-milling unit 08.055 (2 x 1 kW approx.) Milling unit (2 x 0.5 kW approx., 0°-30°) No. 5 Universal milling units for grooving/rabbeting and profiling (5 x 4 kW approx.) Profile scraping unit Flat scraping unit Spraying unit (for polishing liquid) Buffing unit + hot air blower – edge finisher

Stanje: zelo dobro (rabljeno), Double-sided single machine (or 1st and/or 2nd machine in a machine line) Edge thickness in rolls (min/max): 0.4 / 3 mm Panel thickness (min/max): 14 / 60 mm Working width (min/max): approx. 260 / 3200 mm Control / Software: MAESTRO PRO EDGE Feed speed (adjustable): 10–40 m/min Safety and noise protection cabin + cam spacing (mm): 400 Panel processing (for each side): - Protection cutter (pre-milling) AS (1 x 4 kW) - Chipper unit DTR (2 x 8 kW) - Spray unit (for liquid anti-adhesive) AAR EDGE BANDING SECTION (for each side): - Radiator to heat workpiece edges - Gluing station (hot melt + pre-melter) - Pressure zone (CNC controlled) - Motorised edge magazine for rolls (2 positions) - End trimming unit YU/SP-750 (30 m/min) - Pre-milling unit RSP - Multi-profile milling unit (CNC controlled) RI/S 2P - Copy shaping unit (profile tracing) C1+C2 (4 x 0.35 kW) ED-SYSTEM and Fast-Release - Profile scraping unit RAS/S - Flat scraper unit RCA/2C - Spray unit (for polishing liquid) Bdjdpfxewhi Sls Aqteg - Buffing unit SPE - Universal milling unit for grooving/rabbetting and profiling U (1 left + 1 right) 2 x 5.5 kW

Stanje: zelo dobro (rabljeno), Independent machine – Universal machine (first & second in a machine line) Electronic control system – EasyLing programmer Safety and soundproof enclosure No. 3+3 vertical columns, supporting working units Minimum usable working width (mm): 240 Maximum usable working width (mm): 3100 Minimum usable working thickness (mm): 3 Maximum usable working thickness (mm): 150 Retractable stop cams, spacing (mm): 800 Feed speed (stepless, min/max) (m/min): 4 – 24 Total power output 4 working units (for each side of the machine): Bjdpfxswhmdfs Aqtedg - Scoring unit - Automatic scoring unit 1 x 3 kW (RPM 6000) - Planing unit 1 x 6 kW (RPM 6000), 0–10° - Universal milling unit (electropneumatically controlled) 1 x 6 kW (RPM 6000), 0°–90° - Universal milling unit 1 x 6 kW (RPM 6000), 0°–90°

Stanje: zelo dobro (rabljeno), Double-sided stand-alone machine (or 1st and/or 2nd machine in a production line) Edge thickness in rolls (min/max) mm: 0.3 - 3 Edge thickness in strips (min/max, option): mm 20 Panel thickness (min/max) mm: 10 / 60 Working width (min/max) mm: 250 / 3000 (approx.) Feed speed (adjustable) m/min: 12 - 40 (approx.) Safety and noise protection cabin Cam spacing (mm): 500 EDGING PROCESSING (for each side): Spraying unit (for liquid anti-adhesive) Protection milling unit (pre-milling) (1 x approx. 4 kW) Rough-milling unit (2 x approx. 5.8 kW) Universal profiling spindle, 1 x approx. 4 kW EDGE BANDING SECTION (for each side): Gluing unit (hot melt + pre-melter) Edge magazine for rolls (2-fold) + edge pressure zone End trimming unit (2 x approx. 0.35 kW) Pre-milling unit (2 x approx. 1 kW) Bdodpsk Nk R Defx Aqtjg Milling unit (2 x approx. 0.5 kW) 0°-30° Multi-function unit (radius/contour milling unit) with 2 revolvers (8+8 positions) – max. 27 m/min Universal grooving/rebating and profiling spindle 1 x approx. 4 kW (0° - 90°) Profile scraping unit + flat scraping unit + buffing unit

Stanje: zelo dobro (rabljeno), Solo Machine - Universal Machine (first & second in a processing line) Second DEP in the line X10023 Electronic Control: OMRON Separate control cabinet and operator console Safety and soundproof enclosure No. 3+3 vertical support columns for work groups As the second machine, it processes panels with a depth of 1900 mm Min. useful working width (mm): 300 Max. useful working width (mm): 2500 Min. useful working thickness (mm): approx. 6 Max. useful working thickness (mm): 60 Cam distance (mm): 400 Adjustable feed speed (min/max) (m/min): 4-24 Total power: 65 kW Bodpfx Aqoyz Si Hetedg No. 3 working units (for each machine side): - No. 1 universal milling unit (electro-pneumatically operated), spindle length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically operated), spindle length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically operated), spindle length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC-controlled with horizontal and vertical adjustment. - Spare slot

Stanje: zelo dobro (rabljeno), Flexible NC line for drilling, milling and hardware insertion. Numerical control "TPA" Albatros. Consists of: 1) "Igel" loader with 12 positions (for 12 panels), vertical panel feed. 2) Drilling machine, NC pantograph model Over 25.13 with inserter (bushings, shelf support and base). - No. 1 working spindle (approx. 5.5 kW) with turret (10 positions) - No. 1 drill head with 24 independent spindles (X-axis) - No. 1 boring head with 2 independent spindles (Y-axis) - No. 1 drill head with 5 independent spindles (Z-axis) - No. 1 assembly unit (screwing) - No. 1 assembly unit (press fitting) - No. 1 storage and feed hopper 3) Unloading unit (90° transfer), with motorized conveyor for vertical panel discharge. Bdedpfxshvagke Aqtog 4) Unloading unit (0°-90°), with motorized conveyor to transfer panels from vertical to horizontal.

Stanje: zelo dobro (rabljeno), Solo machine - Universal machine (First & Second in a processing line) First DEP in the line X10023 Electronic control OMRON Separate electrical cabinet and operator console Safety and soundproof enclosure No. 2+2 vertical support columns for working units Min. useful working width (mm): 300 Max. useful working width (mm): 2000 Min. useful working thickness (mm): 6 Bedpfx Aqsyz Siaotjdg Max. useful working thickness (mm): 60 Cam spacing (mm): 400 Adjustable feed speed (min/max) (m/min): 4–24 Total power Kw: 60 No. 4 working units (for each side of the machine): - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) - No. 1 universal milling unit (electro-pneumatically controlled), shaft length 300 mm, belt-driven motor (9.2 kW at 3000 rpm) NOTE: These three vertical universal milling units are CNC controlled with horizontal and vertical adjustment. - No. 1 standard universal milling unit (1.5 kW at 1470 rpm)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, številka stroja/vozila: AA2/004582, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 14.500 h, potovalna razdalja osi X: 3.120 mm, pomik osi Y: 1.320 mm, število osi: 5, TEHNIČNI PODATKI Pomik osi X: 3.120 mm Pomik osi Y: 1.320 mm Število osi: 5 Bdsdpfx Aqjy Akr Aotjg PODROBNOSTI O STROJU Delovne ure: pribl. 14.500 h OPREMA Sesalniki vgrajena pihalna šoba novo nameščena krmilna enota Opomba: Stroj je bil že razstavljen s strani proizvajalca.

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna masa: 452 kg, Planer-thicknesser, jointer TECNOMAX FS 41 elite - after technical inspection, ready for operation Specification: • Condition: used, after comprehensive inspection • Manufacturer: TECNOMAX (SCM Group) • Model: FS 41 elite • Working width: 410 mm • Thicknessing height: 240 mm • Table length: 200 cm • Noise-reducing combs at the cutterblock • 3.0 kW motor • Three-knife cutterblock for traditional knives • Extraction port diameter: 120 mm Bedpsy Inuxjfx Aqtsdg • Two feed speeds (6 and 12 m/min) • Original paintwork • Weight: 452 kg • Year of manufacture: 2009 • Overall dimensions: 220 x 90 x 100 cm (L x W x H) Additional information: • The machine is in good technical condition and ready for immediate use • The photos shown represent the actual condition of the item for sale • The machine can be started and inspected on site • The auction price does not include VAT or transport costs Financing and transport: • We arrange transport via MDD fleet, courier companies, or external hauliers • We offer financial solutions such as leasing or lease loan options

Stanje: dober (rabljeno), Leto izdelave: 2007, Technische Daten: - Maximale bearbeitbare Länge: 3.200 mm - Minimale bearbeitbare Länge: 200 mm - Maximale Breite: 200 mm - Minimale Breite: 40 mm - Maximale Werkstückhöhe: 130 mm - Nutztiefe bei max. Zapfendurchmesser Ø 320 mm: 105 mm - Zapfenschlitten-Geschwindigkeit min./max.: 0/100 m/min - Mindest-/maximale Profilieranlage-Geschwindigkeit: 3/15 m/min Bdjdpfxot R T Hcs Aqtog Zapfeneinrichtung: 1. Kappsäge, 5,5 PS (4 kW), Sägeblatt-Ø 400 mm 2. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung 3. Zapfenfrässpindel, Gegenlager 50 x 620 mm, 15 PS (11,3 kW), max. Werkzeugdurchmesser Ø 320 mm, Achshub 575 mm, automatische Splitterschutzvorrichtung, vertikale Positionierung mit kontinuierlicher Achse 4. Digitaler Winkelanschlag Profilieranlage: 5. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, zeitverzögerte Splitterverhinderung bei Kalibrierung, doppelte Drehrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse 6. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, Achshub 280 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 7. Rechts profilierende Frässpindel, Welle 50 x 320 mm, 10 PS (7,5 kW), Werkzeug-Ø 130/240 mm, vertikale und horizontale Positionierung mit kontinuierlicher Achse 8. Auslauf-Werkstückrückführungseinrichtung, vertikale und horizontale Positionierung mit kontinuierlicher Achse, Vorrichtung zur Flügelentnahme (Hfutwt78Z) 9. Untere horizontale Nutspindel, vertikale und horizontale Positionierung mit kontinuierlicher Achse, 8,5 PS (6,4 kW) 10. Digitale Führung 11. Rückführung der Werkstücke zum Bediener

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Delovno območje X: 3600 mm Delovno območje Y: 2200 mm Bjdpfx Aqszwc Nmjtodg Elektrovreteno s 4 osmi, priključek HSK 36F Število vrtalnih vreten za vertikalno vrtanje: 12 Število vrtalnih vreten za horizontalno vrtanje X: 4 Število vrtalnih vreten za horizontalno vrtanje Y: 2 Rezilo za utore v smeri X Linearno menjalnik orodij z 20 položaji Delovna miza za optimizacijo rezanja (Nesting) Programska oprema: Xilog Plus in Maestro CNC Krmilna plošča 2 vakuumske črpalke, vsaka s kapaciteto 250 m3/h Približna teža: 5000 kg. Vključno z 1 agregatom z 2 izhodi in 6 sesalnimi prijemali. Na voljo januarja 2027.