CNC obdelovalni center

SCM morbidelli M 400

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X Ksdpfx Aiox D H Hcs Nsdp • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: rabljeno, Leto izdelave: 2018, Delivery time approx. 5 months. Machine from school operation – TOP condition, low hours (edge banding unit unused). Without tools. Plus dismantling / delivery / installation and commissioning / training. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm. Edge banding – Made for You. The CNC machining centre is equipped with an extensive range of edge banding tools to meet every requirement in woodworking. MAIN ADVANTAGES: - High performance, featuring the advanced edge banding unit H80C, drilling spindles with 8,000 rpm and the most robust spindle technology on the market, providing over 1,000 maintenance-free operating hours. - Superior and more comprehensive equipment: suction cups can be excluded and configured with the FLEX worktable to optimally equip the machine according to requirements. - Easier and more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies 'MAESTRO EDGE'. - Easy to use: the lowered frame keeps the worktable accessible at all times; the control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, there are no safety barriers necessary. Kdodpfxeyuw Sro Ai Nep Frame construction: The base structure is a monolithic construction out of thick-walled steel, reinforced throughout the entire machine bed by welded square-section plates, providing exceptional rigidity. The shape of the machine bed, with a broad base, ensures lasting precision and stability. The supporting structure consists of a particularly robust monolithic steel base, heavily ribbed and very rigid; the especially wide footprint is specifically designed to provide stability, guaranteeing consistent accuracy regardless of operating conditions, with no need to anchor the machine to the floor. The base forms a large and solid support for the moving gantry: the working unit therefore benefits from a balanced, stable, and resilient support capable of withstanding maximum loads, ensuring superior performance and higher accuracy. The moving gantry is made from a solid single piece anchored to the base and runs on high-quality prismatic guides with ball-bearing carriages. The working unit is mounted on it and moves along the Y and Z axes on prismatic guides with ball-bearing carriages. Movement of the lower moving unit (X axis) and the working unit along the moving beam (Y axis) is via a helical rack and pinion system, giving more tooth-to-tooth engagement for greater acceleration and higher speeds along the X and Y axes. The specially designed helical teeth reduce wear and lower mechanical noise. The vertical Z axis is driven by a ball screw, ensuring perfect balance under dynamic loads and supporting rapid acceleration and deceleration. The main milling unit is directly coupled to the Z-axis slide, ensuring absolute machining quality.

Stanje: rabljeno, Leto izdelave: 2002, Obdelovalne mere (premer orodja 25 mm): X=3015 mm Y=1483 mm Z=325 mm Maks. hodilci: X=3268 mm Y=1483 mm Z=325 mm največja programska hitrost: X/Y = 75 m/min / Z = 30 m/min Orodni nosilec HSK 63F Vrtalna enota 7964, 14 vertikalnih vrtalnih vreten s 32 mm razdaljo (10 v x / 4 v y) Žagalna enota 7946, 3,6 kW, pnevmatsko vrtljivo za 90° Glodalna enota 7933, 9 kW Lesena C-os (vektorska os) Magazin za orodja (krožnik s 6 mesti) Ročna upravljalna naprava Laserska naprava (pozicioniranje sesalcev) PC upravljalna konzola z 17" monitorjem Operacijski sistem Windows 2000 Programska oprema: TwinCAM32 - office verzija Vakuumska črpalka 100 m³/h suhi tek Selektivne varnostne stopalne preproge (3-polno delitev) Lokacija zaloge: Nattheim Kdodpfx Aevvi Nbsi Nop

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, Delovno območje X: 6.400 mm Delovno območje Y: 1.500 mm Število rezkalnih vreten: 1 Glavni motor: 13 kW Maksimalna hitrost vrtenja: 24.000 obr/min Sistem za vpenjanje orodja: HSK-F63 Mesta za menjavo orodja: 8 Vertikalne vrtalne glave: 20 Horizontalna vrtala X: 4 Horizontalna vrtala Y: 4 2 vakuumski črpalki po 360 m³/h Nesting Daljinsko upravljanje Programska oprema: BIESSE WORKS Dimenzije: 11004 × 5334 mm Teža: 4900 kg Kdsdpfjwlcqvjx Ai Nep

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, obratovalne ure: 3.000 h, 5-axis CNC portal machine; Console table with 6 movable consoles, each with 2 vacuum cups, side and longitudinal positioning pins, LED position display for vacuum cups Venture 316 Future Package 10 lift rails, connection for Power-Clamp, vacuum connection for templates WORKPIECE PARAMETERS: – Maximum workpiece lengths: All units, single: 3300 mm; pendulum max.: 1740 mm Tool diameter 25 mm: single 3475 mm; pendulum max.: 1915 mm – Workpiece width: Front stop: 950 mm, all units / 1050 mm with tool diameter 25 mm Rear stop: up to 1400 mm / 1550 mm – Workpiece thickness: – Max. 250 mm including clamping fixtures – Up to 60 mm with standard clamps SAFETY AND PROTECTION FEATURES: EC-compliant; SAFETY FENCE ON RIGHT WITH DOOR Kdjdpfx Aiey E Npfs Njp Left and rear: wall installation! Equipment: 10 kW Drive5C spindle and 14-position tool changer (carousel) + 9-position linear changer, side-mounted Drilling head with 16 spindles (vertical 12 / horizontal 4 / none at 90°) AGGREGATE INTERFACE DRIVE5C+ TOOL MEASURING PROBE CHANGER SOFTWARE FOR POSITION MEASUREMENT AND ROTATION OF CNC COORDINATES TOOL TRANSFER STATION COOLANT TANK FOR MACHINING SPINDLE VACUUM PUMP 300/360 m3/h Powerclamp pneumatic package Control: POWERCONTROL PC85 with POWERTouch control system; IPC PowerPack, Operator pedestal for program start; camera system with tablet PC WOODWOP CAD/CAM INTERFACE STANDARD Documentation and control texts: German Delivery includes only the pictured tools and HSK holders!

Stanje: rabljeno, Leto izdelave: 2020, max. workpiece length 3740 mm milling spindle 1 unit main motor 15 kW CNC control system Felder Format4 Type Profit H500S 16.38 CNC machining center for sale on behalf of customer ----- - From a wood window production facility. - Machine is still connected and ready for demonstration Kdedsyq Sztjpfx Ai Njp - Without machining tools Technical Description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Axis travel paths: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional locking mechanism for the C-axis - Boring head DH 18 6H1S: vertical boring unit with 12 spindles (7 spindles in X-direction, 5 spindles in Y-direction, slot saw in X-direction) Horizontal boring unit with 6 spindles, 4 in X-direction and 2 in Y-direction. 1 slot saw in X-direction, max. diameter 120 mm - Disc tool changer with 24 tool positions on the right side of the machine stand max. tool diameter 240 mm max. tool height 370 mm - Tool change position for circular saw blade mounted on the gantry/tool changer, max. saw blade diameter 350 mm - Tool changer on the left in the machine stand with 10 tool positions. max. tool diameter 180 mm max. tool length 230/300 mm collet distance 110 mm - Disc tool changer with 24 tool positions mounted on the gantry, traveling in X-direction max. tool diameter 240 mm max. tool height 370 mm - Mobile pick-up station for chip deflector - 6 workpiece supports, s-motion, position-controlled - 2 machining zones for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved arch processing - Including all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - Software "WoodFlash" Lamello Clamex P Macro Notching Macro - "Greenline Package" for reduced energy consumption ----- Price for the above-mentioned machine on request! ----- Optional new Oppold tool set for H500: Windows Timber windows IV 68, 78 and 88 inward-opening, with changeable rebate on the side and top. Glazing rebate 20mm, frame and sash shoulder 20° bevel with loose and pre-milled glazing bead Old building timber windows IV 68, 78 and 88 inward-opening, without rain bar, with changeable rebate on side, top and bottom. Glazing rebate 20mm, frame and sash shoulder 15° bevel with hung weather bar Timber-aluminium windows (system provider: Gutmann Mira, slanted rebate system) HA IV 68, 78 and 88, inward-opening, 2 sash variants: square and slanted, changeable rebate bottom, side & top Entrance doors Timber HTIV 68, 78 and 88 with single rebate in the frame and double rebate in the sash, inward-opening, 1 sash variant, glazing rebate, without changeable rebate offset construction Timber-aluminium IV 68, 78 and 88 with single rebate in the frame and double rebate in the sash Lift-slide doors Timber-HS IV 68, 78 and 88, without frame production Timber-aluminium-HS IV 68, 78 and 88, without frame production Execution...

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.670 mm, pomik po osi Z: 500 mm, število osi: 4, This 4-axis CNC machining center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1,000–24,000 rpm and C-axis rotation from 0–360°. The machine is equipped with a linear tool changer with 12 positions and a comprehensive drilling head with 16 spindles. In addition, it has a robust safety system with light curtain. Take advantage of this opportunity and purchase this CNC machining center Felder Format 4 Profit H 200. Contact us for further information about this machine. • Automatic central lubrication • Working area: X 3300 mm / Y 1280 mm / Z 250 mm (clearance height from console level depending on clamping system) Kedpex D D Hmsfx Ai Nodp • Operator terminal on the left side of the machine • Handheld terminal with axis speed control and emergency stop • Software: Woodflash (CNC panel, tool database, program editor) • Position display for workpiece support and vacuum suction pads • Vacuum connection for template routing (left side), connection diameter 12 mm • Vacuum pump: 1x, total suction capacity 90 m³/h @ 50 Hz or 108 m³/h @ 60 Hz • Milling spindle: 12 kW (S6), HSK F63, 1,000–24,000 rpm, full rated power at ~12,000 rpm, air-cooled; C-axis 0–360° • Tool changer: 12-position linear on the left side of the machine frame, including storage for aggregates; max. tool diameter 250 mm; max. tool length 240 mm • Drilling head DH 16 4H 2S: 12 vertical spindles (7X / 5Y); 4 horizontal spindles (2X / 2Y); pre-stroke 70 mm; drilling depth 70 mm; shank diameter 10 mm • Grooving saws: 2 (one X, one Y); max. blade diameter 120 mm; max. thickness 5 mm; continuously adjustable speed up to 7,500 rpm • Safety: Front light curtain system

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm ± 20 mm - Operator side: left - Spray gun drive: single version - Dry extraction system Kdsdpfxev N D Ewe Ai Nsp - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable: 1.5 – 7 m/min - PLC control with touch screen - Number of installed spray devices: 0 pcs. - Height-adjustable spray devices - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: ~7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with an offer for assembly and commissioning of the system, as well as training for your personnel. On request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Stanje: dober (rabljeno), Leto izdelave: 2020, Masterwood Project 351 L 3-osiowy CNC Opis Kdsdpfx Ajvu U Itoi Nsp Chłodzony powietrzem 3-osiowy elektrowrzeciono frezujące 17,5 KM (HSK-63F) Przemiennik częstotliwości umożliwiający programowanie prędkości obrotowej 1.500–24.000 obr./min Zmieniacz narzędzi na 22 pozycje 6 pneumatycznych, wpuszczanych prowadnic paneli do załadunku/pozycjonowania ciężkich elementów Przygotowane do montażu docisków 2 poziome dociski do drewna klejonego warstwowo 6 punktów bazowych wzdłuż osi X (pozycjonowanie paneli przy tylnej krawędzi podpór) 8 punktów bazowych wzdłuż osi X (pozycjonowanie paneli w połowie długości podpór) Pełne odniesienie po prawej stronie wzdłuż osi Y Pełne odniesienie po lewej stronie wzdłuż osi Y 2 pola robocze 1 x pompa próżniowa 100 m³ 24 przyssawki próżniowe Pilot radiowy z cyfrowym wyświetlaczem Automatyczny system pomiaru narzędzi Taśmociąg do transportu odpadów Agregat wiertarski z 19 wrzecionami (rozstaw 32 mm) 2,2 kW - 7 pionowych wrzecion w kierunku X - 6 pionowych wrzecion w kierunku Y - 4 poziome wrzeciona w kierunku Y - 2 poziome wrzeciona w kierunku X (wszystkie wrzeciona wiertarskie programowane niezależnie) Jednostka sterująca z komputerem PC Oprogramowanie SINCRO CAD/CAM MASTERWORK Dane techniczne Zakres roboczy w osi X: 5.130 mm Zakres roboczy w osi Y: 1.550 mm Prędkość w osiach X-Y: 80 m/min Prędkość w osi Z: 25 m/min Maks. grubość obrabianego elementu: 200 mm Moc silnika frezującego: 17,5 KM (S1) Obroty elektrowrzeciona frezującego: 1.500–24.000 obr./min Agregat wiertarski: 3 KM System uchwytów narzędziowych: HSK63-F Zmieniacz narzędzi: 22 pozycje Pompa próżniowa: 100 m³ Średnica króćca odpylającego: 250 mm Wydajność powietrza: 4.500 m³/h Prędkość powietrza: 30 m/s Ciśnienie robocze sprężonego powietrza: 7 bar Zużycie sprężonego powietrza: 300–500 l/min Wartość zabezpieczenia: 40 A Waga: 7.000 kg (Wszelkie zmiany, błędy w danych technicznych, informacjach i cenach zastrzeżone. Dostępność może ulec zmianie. Bez gwarancji na dane drukowane!) Najlepsze maszyny do obróbki drewna z Holandii

Stanje: zelo dobro (rabljeno), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety cabin for the working head. Full machine safety enclosure Infeed table (workpiece support). Outfeed table (with conveyor belt) Workpiece feed using 3 conveyor belts (feed speed approx. max 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm: 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm: 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinet. Total installed power (kW): 99 No. 2 WORKING UNITS (TOP) – (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM) – (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) Kdjdpfxjgwbbqs Ai Njp No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 glue injection nozzles and dowel insertion units (right side) No. 8 glue injection nozzles and dowel insertion units (left side) No. 2 dowel magazines for automatic dowel insertion OPTIONS: BARCODE (WIRELESS SCANNER)