Mütek Systemtechnik Briketna Stiskalnica / Briketna Stiskalnica nakup rabljenega (2.810)

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Iijdjgfm Ryspfx Ab Ajb Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Motor power: 5.5 kW Iiedpfx Abjgl Nlms Ajb 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Iisdpfx Aodwktksb Aob Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Iiedschuvropfx Ab Aob Vgradna dolžina je lahko različna

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Iiodpfx Absv Rpxlj Aob Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: dober (rabljeno), Clean air extraction Used machine, good condition Pictures to follow Mobile Jet 160 Connection: 160 mm Iiodsrb D Nspfx Ab Ajb Fan: 2.2 kW Airflow: 1,850 m³/h / 400 V

Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months Very robust machine with high pressing force Iisdpfx Abeffh Ats Ajb - Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development and expertise + Several thousand machines in use with satisfied customers + Good price-performance ratio Options: Surcharge for cooling unit + €3,995 net (can also be retrofitted) * cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a stretch. Large pre-compactor chamber + €1,975 net Recommended for lightweight input materials such as planing shavings Customs tariff number: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Max. briquette stroke: 50 mm Optimal briquette stroke: 50 mm Capacity (depending on material): up to 110 kg/h* Last test: approx. 87 kg/h *Depending on bulk density *Based on a bulk density of 200 kg per cubic meter . Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,925 mm Width: 1,100 mm Height: 1,500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump: 37 liters Hydraulic pre-compactor Press tong cooling option: yes, with special accessory of coolable press tongs Cooling of the press tongs via a water tank (must be supplied by the customer) Hydraulic oil cooling option: yes Fill level monitoring option: yes Continuous briquette option: yes (material-dependent) CE compliant . Requirements for the raw material: - The moisture content (oven dry basis) must be at least 6% and no more than 18% - Maximum chip length: 15 mm - Installation temperature: heated room of at least +5°C - The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, The ideal machine for shredding cables including optimized cutting geometry approx. 9 operating hours Motor: 18.5 kW; 400 V - 50 Hz - 3 phase, Blades: 14 pieces, 40x40mm, multiple edges (reversible), Rotor diameter: 260 mm, Control: Omron PLC, Cutting chamber opening: 600 x 800 mm, Hopper volume: approx. 0.6 m³, Hydraulically operated pusher Screen perforation as required (15 - 40mm) Extraction nozzle Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at extra cost: - Double blade row + €995 net (28 instead of 14) - Extra charge for 4-sided segmented floor + €3,750 net (prevents pusher from jamming. Recommended for shredding plastics, paper, veneers with thickness less than 3 mm). - Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net - Angle conveyor belt (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with shredder) Bea9ia3l27 Raw material requirements: Isdpfx Abogmfa As Aoib - Mineral contamination such as sand, stones, etc. leads to increased wear. We are happy to offer you a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier and we will document the test with photos and videos.

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Iisdpfx Ajchqxxeb Asb Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2023, RUF LIGNUM CLASSIC BRIQUETTING PRESS FOR WOOD YOUR ADVANTAGES AT A GLANCE - Fully automated 24-hour operation possible - Long service life - Low maintenance costs - Compact design Iisdpfxjnxkrbj Ab Asb - Direct integration into existing production lines possible - Over 35 years of experience The RUF wood briquetting press LIGNUM Classic is ideally suited for briquetting medium quantities of wood chips produced in the woodworking industry. The briquetting process enables additional revenues while reducing storage and transport costs. Another advantage lies in the flexibility of our wood briquetting presses. They can process various material particle sizes into high-quality briquettes without the use of binders. As a result, RUF briquettes offer a higher utility value and optimal CO2 balance as a valuable energy source. In addition, our LIGNUM series stands out thanks to the innovative RUF hydraulics, which ensure high energy efficiency and low wear. Technical Data RUF LIGNUM CLASSIC - Max. output capacity wood (kg/h): 410 - Motor power (kW): 30 - Max. specific pressing pressure (kg/cm²): 1700 - Briquette size (mm): 150x60 - Dimensions (m) length x width x height: 2.1 x 1.9 x 2.0 - Approx. weight (t): 3.3 t - With extraction supports - PACKAGING TABLE FREE OF CHARGE

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2014, premer briketa: 150 mm, skupna masa: 3.000 kg, moč: 30 kW (40,79 KM), Performance: 450-500 kg/h Max. pressing force: 1700 kg/cm² Input moisture content: 15% Isdoqd Uy Ajpfx Ab Aoib Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, A used C.F. Nielsen BP 5000 briquette press in very good condition Iedpfx Aewiw Rxob Asib

Stanje: novo, Leto izdelave: 2024, Production time approx. +/- 4 months. The ideal machine, for example, for shredding pallets and wood waste. * prepared for extraction, see pictures 4 and 5 without additional accessories such as -exhibited hopper or -conveyor belt cutout Commodity code: 84659600 Main motor: 55 kW; 400 V - 50 Hz - 3 phase incl. turbo coupling, Hydraulic motor: 2.2 kW, 400 V - 50 Hz - 3 phase Knives: 76 pieces, reversible multiple times Knife size: 35 x 35 x 20 mm Rotor diameter: 360 mm Control system: Siemens S7-1200 PLC Hopper opening approx. 1530 x 1235 mm Hopper volume approx. 2.5 cbm Hydraulically operated pusher Screen perforation: 10 - 30 mm Extraction nozzle Ø 200 mm Weight approx. 4,500 kg Dimensions (LxWxH) approx. 2765 x 2520 x 1730 mm Turbo coupling Standard equipment includes: - V-rotor for maximum throughput - 2nd row of knives on rotor - Control cabinet with Siemens PLC control system - Automatic star/delta start - Fast hydraulic system - Automatic shutdown when rotor is idling - Rotation speed 70-90 rpm for high throughput - Cycle control to avoid idle time - Performance-enhancing step control for hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard and MDF, other materials upon testing and approval by the manufacturer. Iiodpfx Abed Hkqhj Ajb Requirements for raw material: - Moisture content (atro) must be below 30% - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear

Leto izdelave: 2007, stanje: rabljeno, Stroj (dodatno): kontrola preostalih tekočin, dna, ustja, stranske stene Moč: 3,6 kW Napetost: 400 V Frekvenca: 50/60 Hz Stisnjen zrak: min. 6 - maks. 10 bar Dolžina: 2,5 m Širina: 1 m Višina: 2,5 m Formati: Longneck, Steini, Vichy 0,33 l steklenice / 0,5 l Longneck, NRW 0,5 l steklenice Smer teka: desno-levo Iiodpfxexbpg He Ab Aob Upravljanje / Krmiljenje: Heuft Oprema: preostala tekočina, dno, ustje, stranska stena Teža: 1700 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, dolžina gredi: 1.064 mm, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 800 mm, skupna višina: 2.000 mm, skupna dolžina: 900 mm, skupna masa: 100 kg, trajanje garancije: 12 meseci, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vhodni tok: 16 A, potrebna širina: 800 mm, valovna dolžina laserja: 1.064 nm, delovna višina: 900 mm, zahteva za prostor dolžina: 900 mm, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, Oprema: odsesavanje hlapov, The universal LAS 28 XL laser marking system from Systemtechnik Hölzer GmbH is suitable for a very wide range of marking applications. With the integrated fiber laser, you can mark almost all materials, such as steel, hard metal, aluminum, and plastics. Depending on the requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, laser-based permanent marking has become essential. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be incremented automatically by the software after initial set-up. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also possible. The standard equipment includes a laptop with mount, Windows operating system, and laser software. Optionally, the LAS 28 XL laser marking system can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, adjustable Z-axis, drawer systems, etc., are also available. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (optionally larger) • Marking software: EZCAD in German / English • Signal lamp to display operating status • Optional: Rotary axis (3-jaw chuck) • Optional: Digital height measuring system • Optional: Fume extraction (incl. activated carbon filter) • Optional: Extensions for large components (one-sided or double-sided) • Optional: Autofocus system • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Maximum component height: approx. 300 mm • Electrically adjustable Z-axis • Laptop with mount and Windows operating system • Frame made of aluminum profile • Air-cooled • Door width approx. 700 mm / door height (pass-through): approx. 400 mm • Connection: 230V Iijdpfx Asywg Sbjb Aob • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 100 kg

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 140 kg, skupna dolžina: 900 mm, skupna širina: 800 mm, skupna višina: 2.000 mm, vhodna frekvenca: 50 Hz, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, vrsta hlajenja: zrak, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, the use of lasers has become indispensable in many industries. Iodoxuvk Eepfx Ab Asib The powerful laser software enables the creation of text, numbers, 2D codes, QR codes, and logos with just a few clicks and little programming knowledge. The software automatically increments serial and article numbers as preset. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically insert them into predefined fields. Using a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optional larger) • Marking software EZCAD in German / English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: extraction unit (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Pilot laser (simple preview, contour preview) • Focus finder (easy focus adjustment) • Signal light for operating status display • Max. workpiece height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows OS • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 2000 mm (LxWxH) • Weight: approx. 120 kg

Leto izdelave: 2025, stanje: novo, Granulator MVZ 7.5 kW Demonstration unit available at special price Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for the secondary size reduction of wood chips. More details can be provided after testing with your material. Our granulators are used for size reduction of a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for a variety of shredding tasks. For example, in injection molding machines, scrap parts and sprues are produced that need to be recycled. In blow molding machines, along with scrap parts, trim waste or start-up parisons must be processed. Materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes from blow molding can be processed. Material is fed from above via a hopper into the grinding chamber of the granulator. The internal rotor is equipped with knives. The material is shredded between the rotating knives and the stationary knives mounted in the grinding chamber housing until it passes, as defined regrind, through the screen located below the rotor. *Option: The ground material is usually pneumatically conveyed to big bags, silos, or other containers. The price applies only to the size reduction unit as shown in image 1 - Fan, cyclone, and filter are optional components. --- Technical Data: Granulator MVZ 7.5 kW Motor: 7.5 kW *Larger machines available on request (4 to 75 kW) Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material Application example: Shredding of PE 1000 plastic Input material: approx. 40 mm chip length Secondary shredding to approx. 6 mm Throughput up to 50 kg/h with a 6 mm screen (Throughput up to 80 kg/h with an 8 mm screen) ___ Significantly higher throughputs can be achieved when re-shredding G 30 wood chips. Up to a maximum of 400 kg/h with a 10 mm screen *metered feed, e.g., via conveyor belt or auger. Details available after a test run with approx. 30 kg. Rotor diameter: 180 mm 6 rotor knives, each 225 mm 4 stator knives, each 225 mm Iedpfxod N Dn Do Ab Ajib Dimensions: 930 x 730 x 1420 mm Weight: 450 kg Suction nozzle: 100 mm Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request Price per screen: €390 Price for replacement knife set: €679 Suitable for example for: - All types of plastic waste Various materials – HDPE, LDPE, PP, PS, PC, PA - Biomass - Wood - Herbs etc. Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc. --- Larger units available as options: Granulator MVZ / 18.5 kW Throughput up to 350 kg/h *dependent on screen and material Opening: 620 x 400 mm *optional with matching extraction/conveying system Granulator MVZ / 30 kW Throughput up to 400 kg/h *dependent on screen and material Opening: 620 x 500 mm *optional with matching extraction/conveying system --- To select the right machine, the following information is required: - Length x width x height of the feed material? - Required screen size (final output size in mm)? - Required throughput per hour in kg? - Wall thickness in mm? - Material description Photos can also be helpful

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 400 mm, skupna višina: 690 mm, skupna dolžina: 600 mm, skupna masa: 45 kg, vrsta nastavitve višine: električni, dolžina območja skeniranja: 110 mm, širina območja skeniranja: 110 mm, potrebna višina: 900 mm, valovna dolžina laserja: 1.064 nm, temperatura okolja (min.): 15 °C, okoljska temperatura (maks.): 35 °C, vhodna frekvenca: 50 Hz, vrsta laserja: vlakenski laser, The LAS 22 is a compact tabletop unit with a small working area, making it ideally suited for small parts or, for example, nameplates. Due to its compact design, the machine is very practical and can be used virtually anywhere. The device is very easy to operate and requires no programming knowledge. With the powerful laser software, texts, numbers, 2D codes, QR codes, and logos can be created in just a few clicks, without extensive programming skills. The software automatically increments serial and item numbers after initial setup. In addition, the software can retrieve data (such as variable information like drawing numbers, project names, etc.) from existing tables and automatically transfer it to predefined fields. The use of a handheld scanner is also possible. A laptop with a Windows operating system and laser software comes as standard. Optionally, the LAS 22 laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. - 30-watt fiber laser (optional: 20 watts, 50 watts) - Laser class 1 - Wavelength 1064 nm - Marking field size 110 x 110 mm - Marking software EZCAD in German/English - Pilot laser (easy preview/contour preview) - Focus finder (easy focusing) - Max. component height approx. 95 mm - Grid bores for fixtures - Clamping area 310 x 190 mm - Electrically adjustable Z-axis - Electric door with pinch protection - Optional: Fume extraction (incl. activated carbon filter) - Welded construction made of sheet steel - 230 V connection - Air-cooled - Laptop with Windows operating system (German or English) - Dimensions (W x D x H): 600 x 400 x 690 mm - Weight: approx. 45 kg - Low operating costs Iijdpfjy I Nbmox Ab Aob

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, hitri pomik os Y: 20 m/min, največja hitrost vretena: 60.000 obr/min, montažni premer: 3 mm, skupna širina: 800 mm, vrsta vhodnega toka: Klimatska naprava, dolžina mize: 320 mm, višina mize: 560 mm, trajanje garancije: 12 meseci, delovna širina: 560 mm, temperatura okolja (min.): 18 °C, okoljska temperatura (maks.): 30 °C, priključek za stisnjen zrak: 6 letvica, delovna dolžina: 320 mm, število osi: 3, The compact table-top version LOW MINI was specifically developed for depaneling small-format series, small quantities of large-format PCBs, and cost-conscious production. PCB materials with remaining tab connections can be quickly and economically separated up to a maximum size of 320 mm x 560 mm. The separation process is servo-controlled in all axes, with the milling spindle operating from above. The real highlight of the machine is the easy and straightforward switch of working area from small (320x280mm) to large (320x560mm) format. • Short cycle times due to shuttle operation Iijdpsxmfdxsfx Ab Asb • X-/Y-axes with linear motor technology • PCB fixation with pin technology • Flexible handling • PCBs with residual tab connections • Milling spindle adjustment with servo technology • Extraction unit • Easy operation • Excellent price/performance ratio Manual depaneling – flexible and cost effective The concept of manual depaneling offers significant advantages in terms of flexibility and cost. Medium batch sizes can be quickly and with minimal dust separated using the LOW MINI. The standard version features dual loading with linear motor technology; for enlarging the working area, single-shuttle operation is possible. Ease of maintenance and operation, combined with the outstanding price/performance ratio, provide a comfortable working experience, making the investment in this depaneler economically worthwhile as well. Axis speed: 160mm/s Repeatability: 0.02 mm Separation accuracy: 0.1mm Shank tools: 0.8 - 2.4mm

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 45 kg, skupna dolžina: 350 mm, skupna širina: 605 mm, skupna višina: 1.080 mm, vhodna napetost: 230 V, laserska moč: 20 W, valovna dolžina laserja: 1.064 nm, dolžina območja skeniranja: 70 mm, širina območja skeniranja: 70 mm, vrsta vhodnega toka: Klimatska naprava, vrsta laserja: vlakenski laser, The mobile LAS 23 portable laser is distinguished by its compact design. Small, handy, and equipped with custom-made attachments that can be individually exchanged via a quick-change system. Thanks to its mobile base frame, it can be moved directly to the workpieces to be marked. This makes it suitable for both large, heavy, and small workpieces. The powerful laser software enables text, numbers, 2D codes, QR codes, and logos to be created with just a few clicks, without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after prior configuration. Additionally, the software can read data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined areas. The use of a hand scanner is also possible. Made in Germany • Fiber laser 20W (optional: 30 watt, 50 watt) Iijdpeu Smcbsfx Ab Asb • Laser class 1 • CE compliant, according to EU directives • Wavelength 1064nm • Marking field size 70x70mm (optional: 110x110mm) • Signal light for operating status (on handheld unit) • Marking software: EZCAD • Power connection: 230V • Air-cooled • Laptop with Windows operating system • Dimensions: 350 x 605 x 1080mm (LxWxH) • Weight: approx. 40 kg • Weight of portable laser unit (handheld): 2.8 kg • Fiber optic cable approx. 2.50 m • Integrated extraction system

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 230 V, vrsta vhodnega toka: Klimatska naprava, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 1.500 mm, skupna višina: 2.050 mm, skupna dolžina: 900 mm, skupna masa: 120 kg, vrsta nastavitve višine: električni, širina odprtine vrat: 700 mm, višina odprtine vrat: 400 mm, dolžina območja skeniranja: 150 mm, širina območja skeniranja: 150 mm, potrebna širina: 1.550 mm, potrebna višina: 2.100 mm, valovna dolžina laserja: 1.064 nm, vhodna frekvenca: 50 Hz, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is designed for a wide range of marking applications. Thanks to its integrated fiber laser, you can mark nearly all materials, including steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. In many industries, utilizing a laser for permanent marking has become indispensable. The powerful laser software enables easy creation of texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no advanced programming knowledge required. The software can automatically increment serial and article numbers as preset. In addition, it can import data (such as drawing numbers, project labels, etc.) from existing tables and automatically transfer them to predefined fields. The use of a hand scanner is also supported. Standard features include an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe model can be outfitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W, or 50W Iiedpfx Aberxrrhj Aob • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150 x 150 mm (larger sizes optional) • Signal lamp indicating operational status • Options: rotary axis (3-jaw chuck) • Options: extraction unit (including activated carbon filter) • Options: digital height measuring system • Options: autofocus system for automatic focus adjustment • EZCAD marking software in German/English (other software available on request) • Pilot laser (easy preview, plain text preview) • Focus finder (simple focus adjustment) • Max. component height: approx. 300 mm • Electrically adjustable Z-axis • Integrated PC running Windows • Height-adjustable monitor and keyboard mount • Frame made of aluminum profiles • Air-cooled • Door width: approx. 700 mm / Door height (pass-through): approx. 400 mm • Power supply: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) with monitor mount: approx. 1500 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2022, skupna masa: 150 kg, skupna višina: 2.300 mm, skupna dolžina: 1.200 mm, skupna širina: 600 mm, model krmilnika: SPS-Steuerung, delovna širina: 300 mm, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, število predalov: 1, natančnost pozicioniranja: 1 mm, delovna višina: 30 mm, delovna dolžina: 400 mm, delovno območje: 400 mm, Oprema: CE označba, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped Iiedpfx Aoyx Hgbeb Ajb • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H)

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna masa: 120 kg, skupna dolžina: 900 mm, skupna širina: 1.500 mm, skupna višina: 2.050 mm, vhodna napetost: 230 V, laserska moč: 30 W, valovna dolžina laserja: 1.064 nm, natančnost ponavljanja: 0,01 mm, vrsta laserja: vlakenski laser, Oprema: USB priključek, osvetlitev, The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible. Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request. Made in Germany Fiber laser: 30W, 20W, or 50W • Laser class 1 • Wavelength: 1064 nm • Marking field size: 150x150 mm (larger optional) • Marking software EZCAD in German/English • Optional: rotary axis (3-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction unit (including activated carbon filter) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Signal tower for operating status display • Max. component height approx. 300 mm • Electrically adjustable Z-axis Iedpfeyxccrox Ab Aeib • Integrated PC with Windows OS • IPS PCAP touchscreen and height-adjustable keyboard platform • Aluminum profile frame • Air-cooled • Door width approx. 700 mm / door height (pass-through): 400 mm • Connection: 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, položaj glave za glodanje: mittig, največja hitrost vretena: 60.000 obr/min, skupna višina: 1.550 mm, skupna dolžina: 1.870 mm, skupna širina: 1.040 mm, največja hitrost vrtenja: 60.000 obr/min, vrsta vhodnega toka: trifazni, skupna masa: 560 kg, delovno območje: 420 mm, trajanje garancije: 12 meseci, vrsta pogona: Linearmotor, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Semi-automatic depaneling / Base machine with parallel shuttle Ijdpfxsxt Dk Re Ab Ajib The dynamic depaneling machine LOW 4322 is specifically designed for medium to high product volumes and meets the growing demands of the production process. PCB panels made of various materials are separated with maximum product flexibility, precision, and throughput using dust- and stress-minimizing sawing and milling techniques. Highly dynamic linear motor axes, tools, and grippers meet the highest quality standards, guaranteeing the depaneling machine superior durability and reliability. Semi-automatic depaneling – Solutions tailored to your needs The LOW 4322 allows for fast product changeovers while maintaining short separation and handling times. Panel loading is carried out via a parallel shuttle, with pick-up and fixation via pin clamping technology, and, if required, in combination with vacuum suction cups. Made in Germany The machine is equipped with: • A shaft and disc tool separation module on the Z-axis (automatically rotatable 0-90°) • X-Y cross table module with linear motor technology and high-resolution measuring system • Dual loading module designed as a parallel shuttle, separate left and right with sliding doors • Profile frame with two maintenance doors – left and right, ESD compliant • Standard vision system base module for teach-in programming • Working area of 420 x 330 mm per side • Automatic cutter length compensation • Remote maintenance/support via remote connection • Touch IPC with Windows operating system • Laser axis measurement including protocol • Air ionization • Cutter breakage control for slot cutters only • Prepared for vacuum clamping technology • Disc and sliding doors ESD compliant An optional dust extraction unit can be offered retrofitted if needed.

Stanje: novo, Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, skupna širina: 600 mm, skupna dolžina: 1.200 mm, skupna višina: 2.300 mm, skupna masa: 150 kg, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, delovno območje: 400 mm, višina izdelka (maks.): 30 mm, model krmilnika: SPS-Steuerung Siemens Simatic HMI, vhodna frekvenca: 50 Hz, priključek za stisnjen zrak: 6 letvica, nosilnost na stojalo: 50 kg, natančnost pozicioniranja: 1 mm, Oprema: CE označba, dokumentacija / priročnik, osvetlitev, varnostna svetlobna zapora, Feeding and Buffering System for Lightweight Items in Workpiece Carriers. Tray feeding for magazine storage in automated production lines. Specifically designed for components sensitive to surface or contour. Made in Germany • Designed for tray sizes up to 400 x 300 x max. 30mm • Fast tray changeover time (4-8 seconds) • Max. tray weight including workpieces: 5kg • Max. tray stacker weight: 50kg • Positioning accuracy: ± 1mm • PLC control with operation and monitoring display • ESD equipment • Safety package: Leuze light curtain for tray stacker • AGV communication interface prepared – Siemens IWLAN Client • RFID read/write head • Increased autonomy time: 1 stack • Machine safety: active door interlock • Compact footprint due to space-saving design • Flexible adaptation to various machines via different interfaces • Low investment costs • Fully equipped • Robust construction (solid steel frame, powder-coated) • No machine adapters required • Supply voltage 400V / 50Hz / 3ph • Minimum air pressure: 6bar • Dimensions: 1200 x 600 x 2300mm (L x W x H) Ijdpfxeyx Hrke Ab Aoib