Gravirni laser 30 W - LAS 28 XLe
30 Watt Laser Systemtechnik Hölzer GmbH LAS 28 XLe 30 W / individuell anpassbar

Leto izdelave

2026

Stanje

Novo (popolnoma funkcionalen)

Lokacija

Kronberg im Taunus Nemčija

Gravirni laser 30 W - LAS 28 XLe 30 Watt Laser Systemtechnik Hölzer GmbH LAS 28 XLe 30 W / individuell anpassbar

30 Watt Laser Systemtechnik Hölzer GmbH LAS 28 XLe 30 W / individuell anpassbar

Podatki o stroju

Oznaka stroja:: Gravirni laser 30 W - LAS 28 XLe

Proizvajalec:: 30 Watt Laser Systemtechnik Hölzer GmbH

Model:: LAS 28 XLe 30 W / individuell anpassbar

Leto izdelave:: 2026

Stanje:: novo

Funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

najem:: je mogoče

Lokacija:: Westerbachstraße 4, 61476 Kronberg, Deutschland

Pokliči

Tehnične podrobnosti

Skupna masa:: 120 kg

Skupna dolžina:: 900 mm

Skupna širina:: 1.500 mm

Skupna višina:: 2.050 mm

Vhodna napetost:: 230 V

Laserska moč:: 30 W

Valovna dolžina laserja:: 1.064 nm

Natančnost ponavljanja:: 0,01 mm

Vrsta laserja:: vlakenski laser

Oprema:: USB priključek, osvetlitev

Podrobnosti ponudbe

ID oglasa:: A21596238

Referenčna številka:: Gravierlaser mit Touchbildschirm

Posodobitev:: nazadnje dne 26.03.2026

Opis

The universally applicable LAS 28 XLe laser marking system by Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. The integrated fiber laser allows you to mark almost any material, such as steel, hard metal, aluminum, and plastics.

Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become indispensable in many industries.

The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. The software automatically increments serial and item numbers after initial setup. Additionally, the software can import data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer them into predefined fields. The use of a handheld scanner is also possible.

Standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be equipped with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as side cantilevers for marking long parts, movable Z-axis, drawer systems, etc., are available upon request.

Made in Germany

Fiber laser: 30W, 20W, or 50W
• Laser class 1
• Wavelength: 1064 nm
Rsdpfx Absyxccropjcb
• Marking field size: 150x150 mm (larger optional)
• Marking software EZCAD in German/English
• Optional: rotary axis (3-jaw chuck)
• Optional: digital height measurement system
• Optional: autofocus system – automatic focus distance determination
• Optional: extraction unit (including activated carbon filter)
• Pilot laser (easy preview, contour preview)
• Focus finder (easy focus adjustment)
• Signal tower for operating status display
• Max. component height approx. 300 mm
• Electrically adjustable Z-axis
• Integrated PC with Windows OS
• IPS PCAP touchscreen and height-adjustable keyboard platform
• Aluminum profile frame
• Air-cooled
• Door width approx. 700 mm / door height (pass-through): 400 mm
• Connection: 230V
• Dimensions: approx. 900 x 800 x 1900 mm (LxWxH)
• Weight: approx. 120 kg

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Ponudnik

Nazadnje na spletu: prejšnji teden

Registriran od: 2018

41 Oglasi na spletu

Pokliči

Pošlji povpraševanje

Sporočilo*

Ime*

E-pošta*

Telefon

Podjetje

Poštna številka in krajZemljišče

Sem trgovec

Prejmite ponudbe za podobne stroje

Opomba: Vaše povpraševanje bo posredovano vsem prodajalcem v kategoriji strojev. S tem lahko prejmete zelo veliko ponudb.

Izjava o varstvu podatkov

Telefon & Faks

+49 6173 ... oglasi

Zapomni si

Deli Prijavi oglas

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Rossum

944 km

CNC rezkalni stroj
HurcoVMX30 HSi

Pokliči

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, obratovalne ure: 3.900 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 762 mm, pomik osi Y: 508 mm, pomik po osi Z: 610 mm, največja hitrost vretena: 18.000 obr/min, delovne ure vretena: 3.900 h, Ponujamo zelo dobro ohranjen stroj Hurco VMX30 HSi z vretenom HSK-A63 in 18.000 vrt/min. Pomik po osi X: 762 mm Pomik po osi Y: 508 mm Pomik po osi Z: 610 mm Stroj ima naslednje možnosti: Rcsdpfx Abjx N E H Uepjb Notranje hlajenje 20 bar Menjalec orodij za 40 orodij Vreteno 18.000 vrt/min HSK-A63 Linearne merilne letve Merilna sonda Renishaw OMP40 Orodna sonda Renishaw TS27R Programska oprema Ultimotion Programska oprema za optimizacijo menjave orodja Prosimo, upoštevajte, da primeži niso vključeni v prodajo stroja.

Poglej podrobnosti

Mali oglas

Hurco TMX8MYS, (neposredna prodaja kupcu) HURCO Hurco TMX8MYS, Bj. 2011

Hallein

228 km

Hurco TMX8MYS, (neposredna prodaja kupcu)
HURCOHurco TMX8MYS, Bj. 2011

Pokliči

Mali oglas

Vertikalni obdelovalni center Hurco VMX30

Madžarska

362 km

Vertikalni obdelovalni center
HurcoVMX30

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Splošni podatki Širina: 2.300 mm Globina: 2.800 mm Višina: 2.700 mm Teža stroja: 4.500 kg Glavni pogon Območje vrtljajev vretena: 10.000 min⁻¹ Moč motorja vretena: CAT40 / SK40 Število osi: 4 Pomik Pomik osi X: 762 mm Hitri pomik osi X: 24 m/min Pomik osi Y: 508 mm Hitri pomik osi Y: 24 m/min Pomik osi Z: 610 mm Hitri pomik osi Z: 24 m/min Miza Velikost T-utora: 18 mm Število T-utorov: 5 Nosilnost mize: 750 kg Redsx D Ikpopfx Abpocb To štiriosno obdelovalno centro Hurco VMX30 je bilo proizvedeno leta 2004. Ponaša se s CNC rezkalnim strojem z vrtljivo mizo za funkcionalnost četrte osi. Ključne tehnične lastnosti vključujejo hod po osi X 762 mm, Y 508 mm, Z 610 mm in dimenzijo mize 1.016 × 508 mm. Največja hitrost vretena je 10.000 min⁻¹, revija za orodje ima kapaciteto 24 orodij. Izkoristite priložnost za nakup tega vertikalnega obdelovalnega centra Hurco VMX30. Za več informacij nas kontaktirajte. Uporaba Rezkanje

Poglej podrobnosti

Mali oglas

Stroj za izdelavo vijakov Hilgeland CH1 KHA

Lüdenscheid

785 km

Stroj za izdelavo vijakov
HilgelandCH1 KHA

Pokliči

Mali oglas

Stroj za valjanje navojev, stroj za hladno valjanje, stroj za valjanje navojev, profilni valjar, val PEE-WEE UPW 24

Hessisch Lichtenau

682 km

Stroj za valjanje navojev, stroj za hladno valjanje, stroj za valjanje navojev, profilni valjar, val
PEE-WEEUPW 24

23.000 €

Fiksna cena plus DDV

Pokliči

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Redjuz If Nspfx Abpocb Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Poglej podrobnosti

Mali oglas

Sistem za luščenje SANDMASTER FG2-20-2-9

Root

516 km

Sistem za luščenje
SANDMASTERFG2-20-2-9

Pokliči

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), SANDMASTER FG2-20-2-9 Shot Peening Machine Drive for Nozzle Traverse: 0.10 kW, Lighting: 24 W, Blasting Pressure Range: 0.5 - 8 bar, Abrasive Grain Size: 0.1 - 0.30 mm, Fan Motor: 250 W, Filter Surface Area: 1 m², Pressure Drop in Filter Housing (Inlet - Outlet Total): 170-250 Pa, Noise Level with Built-In Silencer: 62 dBa, Electrical Connection Voltage: Socket 3 x 400 V 50 Hz, 16A (3P+N+E), Compressed Air Connection: min. 1/4" air line with hose nipple for compressed air hose with 13 mm inner diameter, Required Compressed Air Quality: ISO 8573-1, Class 1.7.2, Maximum Traverse Length: 350 mm. Rsdofcpxuopfx Abpjcb

Poglej podrobnosti

Mali oglas

Weiterstadt

632 km

Obdelovalni center
HurcoVMX 24

Pokliči

Mali oglas

Laser za graviranje / laser za označevanje

Aachen

833 km

Laser za graviranje / laser za označevanje

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, OEM – Marking Laser (Laser Safety Class 4) The beam source is a 20 watt fiber laser with a wavelength of 1064 nm. The marking area is 120 mm x 120 mm; optionally, sizes up to 300 x 300 mm are available. No external cooling is required. Power supply: 230 VAC / 50 Hz. Typical applications include laser engraving and material removal. The Weldmark 3 control software is installed on the supplied PC, with Windows 10 Professional as the operating system. The laser head can be adjusted manually. Optionally, software-controlled linear axes and a rotary axis can also be integrated. The control software language is selectable (German, English, French). Rjdpon Atmvjfx Abpecb The laser system is prepared for integration into a higher-level production line, but can also be used as a stand-alone unit. Interfaces for interlock, emergency stop, external laser control, etc., are available for integration. We are happy to provide customer support according to your requirements by arrangement.

Poglej podrobnosti

Mali oglas

Hurco CNC TMX 8 MYSi Hurco CNC TMX 8 MYSi

Nemčija

653 km

Hurco CNC TMX 8 MYSi
HurcoCNC TMX 8 MYSi

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 346 h, število osi: 5, This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine is equipped with a 12-station tool turret and a rapid traverse rate of 24 m/min on the X-axis. If you are looking for high-quality turning and milling capabilities, the Hurco CNC TMX 8 MYSi turning-milling center should be considered. Contact us for further details. • X-axis travel: 203 mm • Y-axis travel: ±55 mm • Z-axis travel: 560 mm • W-axis travel: 640 mm • Rapid traverse X/Y/Z/W: 24 / 12 / 30 / 30 m/min Rcedsym T Itjpfx Abpjb • Positioning accuracy: 0.01 mm • Repeatability: 0.005 mm • Max. turning diameter: 508 mm • Max. turning length: 560 mm • Max. workpiece diameter over bed: 335 mm • Tool turret: VDI 40 • Number of stations: 12 • Max. driven tool speed: 5,000 rpm • Driven tool power: 6.3 kW • Driven tool torque: 28 Nm • Max. main spindle speed: 4,500 rpm • Max. sub-spindle speed: 6,000 rpm • Synchronizing spindle speed: 2,500 rpm • Main spindle power (S6 / S1): 25 / 17.2 kW • Sub-spindle power (S6 / S1): 15 / 11 kW • Main spindle torque (S6 / S1): 239 / 164 Nm • Sub-spindle torque (S6 / S1): 102 / 75 Nm • Main spindle chuck size: 203 mm • Sub-spindle chuck size: 150 mm • Main spindle bar capacity: 64.5 mm • Sub-spindle bar pass-through: 46 mm • Electrical supply: 400 V, 50 Hz, 3 phase • Largest motor: 22 kVA • Maximum motor current: 32 A • Full load: 58 kVA • Full load current: 83 A • Short-circuit resistance: 5 kA RMS symmetric • Interruption capacity: 10,000 A • Maximum ambient temperature: 35 °C • Coolant tank capacity: 203 L • Machine weight: 7,500 kg • Transport weight: 8,250 kg • BMT65 holders are included; swiveling holders are not included.

Poglej podrobnosti

Mali oglas

Varilna miza Protec Siegmund, Demmeler HDL 1500 Hub Drehtisch

Hergensweiler

430 km

Varilna miza
Protec Siegmund, DemmelerHDL 1500 Hub Drehtisch

Pokliči

Stanje: novo, Leto izdelave: 2024, nosilnost: 1.500 kg, Special Price Promotion: €2,000 Discount Perforated Table 1200 x 2400 x 200 mm Tabletop Thickness: 20 mm, Hole Diameter: 28 mm Redpfxouua Ino Abpjcb Swivel Range: 360° Height Adjustment: Hydraulic Motor, 800 to 1200 mm Rotational Speed: 0.5 rpm Motor Power: 0.75 kW We offer the tables in various sizes and load capacities: Load capacity 500 kg, Dimensions: 1000 x 1500 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 1000 kg, Dimensions: 1000 x 2000 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 1500 kg, Dimensions: 1200 x 2400 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 2000 kg, Dimensions: 1200 x 2400 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 3000 kg, Dimensions: 1200 x 2400 x 200 mm, 28 mm holes, with manual or automatic height adjustment Load capacity 5000 kg, Dimensions: 1500 x 3000 x 200 mm, 28 mm holes, with manual or automatic height adjustment

Poglej podrobnosti

Oglašujte tukaj