Gecam Euro Fintec Stroj Za Odstranjevanje Napak Iz Pločevine nakup rabljenega (97.109)

Stanje: novo, Condition: new Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €153,200 Leasing rate: €2,895.48 Working width: 1350 mm Sheet thickness range – mild steel: 0.4 – 120 mm Abrasive belt dimensions: 1370 x 2200 mm Extraction capacity: 6000 m³/h Connection for extraction: Diameter 150 mm Compressed air connection: 6 bar Length: 4200 mm Width: 2300 mm Height: 2350 mm Weight: 4200 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT ABOVE * The machine is built from welded and normalized steel to ensure a stable and rigid structure. * Worktable with motorized height adjustment enabled by synchronized movement of 4 screws. * Independent motors with emergency brakes integrated within the machine frame. * Dust extraction hoods within the machine. The control panel includes: * Automatic star-delta starter for main motors * Digital display for material thickness with decimal accuracy * Thickness adjustment with control (+/- 0.1) * Alarm control center for immediate visualization of emergencies and/or faults. FEED UNIT * Table constructed of a solid metal structure with a ground and wear-resistant gliding surface. * Modified structures for vacuum systems available on request * Table lifts and lowers from 780 mm to a maximum height of 950 mm above floor level. Table height adjustment motor output: 0.25 kW. * Maximum permissible load on the table: 140 kg. * Variable feed speed via inverter from 0.4 to 4.5 m/min, optional: 0.2 to 2.0 m/min or 0.6 to 6.0 m/min. * Conveyor belt made of special natural rubber, oil- and heat-resistant, with automatic centering system. * Side guides preventing the conveyor from lifting. * Rubberized pressure rollers, oil- and heat-resistant, fitted before and after each working unit. * Automatic centering device for the conveyor belt * Automatically servo-cooled motor * Speed motor displayed on the main touchscreen 1ST DEBURRING UNIT WITH ABRASIVE BELT Iajdpfx Aasynmw Ro Ujr * Rectified and balanced contact roller, 180 mm diameter. Coated with oil- and heat-resistant nitrile rubber. Standard roller hardness 55° Shore. Mounted on an eccentric shaft, allowing control of working position and compensation for abrasive belt wear, up to 8 mm. This system is controlled by a pneumatic cylinder which enables the group to be engaged automatically and, in the event of an emergency and/or machine stop, allows immediate withdrawal of the belt from the working area. Abrasive belts and/or Scotch-Brite can be mounted. * Pneumatic ON/OFF switch. * Roller adjustment up/down ("grain" stroke 10 mm) * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotational speed in feed direction: 4 – 18 m/s. * Adjustable width and duration of oscillation. * Pneumatic abrasive belt tensioning system. LED indicator for wear control. * Abrasive belt centering system with electronic photo cell indicator; amplitude and intensity of oscillation adjustable. 2ND ROTARY BRUSHING UNIT * Consisting of 8 deburring brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and...

Stanje: novo, Condition: New Delivery time: approx. 12 - 14 weeks from order Country of origin: Italy Price: €74,000 Leasing rate: €1,398.60 Working width: 1,350 mm Sheet thickness range (mild steel): 0.5 - 170 mm Abrasive belt dimensions: 1,370 x 2,200 mm Extraction capacity: 4,000 m³/h Extraction connection: diameter 200 mm Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Length: 1,750 mm Width: 2,100 mm Height: 2,180 mm Weight: 2,000 kg EQUIPPED WITH 2 WORKING STATIONS: 1 x ABRASIVE BELT AND 1 x TOP BRUSH UNIT Machine made of stress-relieved steel welded construction for stable and rigid structure. Worktable with motorized height adjustment via 4 synchronized spindles. Independent drive motors for each working station. Extraction hoods inside the machine, one per station. Touch screen for * Automatic star-delta switching of main motors * Analog ammeter for each station * Digital sheet thickness display with decimal point tolerance Iodpfx Asynmwkea Ujar * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm messages FEED SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter, 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant. Automatic conveyor belt centering. Side guides to prevent the belt from lifting. Rubber pressure rollers before and after each station, oil and temperature resistant. Idler rollers at the front and rear of the table. 1st WORKING STATION – R Balanced contact roller, anti-oil and anti-heat nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation of abrasive belt wear. Pneumatic cylinders for automatic engagement in working position and lifting during emergency stop. Abrasive belts and/or Scotch-Brite can be used. Motorized adjustment and electronic control of contact roller height. Variable-speed motor with automatic emergency brake. Pneumatic belt tensioning system. Abrasive belt centering system with electronic photo cell. Oscillation adjustment for width and timing. Contact roller adjustment precision: ±0.02 mm Contact roller adjustment speed: 10 m/min Contact roller diameter: 180 mm Rubber roller hardness: 55 Shore Contact roller stroke (grit adjustment) up/down: 8 mm Abrasive belt speed: 3 – 18 m/s Motor power: 11 kW 2nd WORKING STATION – X 2 rows of vertical brushes, 10 rotating clockwise and 10 counterclockwise Oscillating cross movement of the whole group Quick-change system for brushes Brush diameter: 115 mm Number of brushes: 20 pcs Oscillation stroke: 15 mm Rotational motor power: 5.5 kW Rotational speed: 300 – 1000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s OPTIONS AND ACCESSORIES B Group – External horizontal drum brush Ø 150 mm over Scotch-Brite brush: €5,580.00 over wire brush 0.3 mm: €5,900.00 R Group – ABRASIVE BELT Motor 15 kW: €1,060.00 OPTIONS: Return to Sender system (workpiece is discharged to the front): €1,290.00 Conveyor belt with vacuum system, 300 mm wide, 4.0 kW: €4,780.00 2 additional PVC-coated rollers at infeed and outfeed sides: €2,040.00 Tampico brush system for component cleaning, 0.55 kW, Ø 150 mm: €4,5...

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, delovna širina: 1.500 mm, hitrost pomika os X: 4 m/min, vrsta vhodnega toka: trifazni, najv. debelina pločevine: 102 mm, skupna dolžina: 2.300 mm, skupna širina: 2.600 mm, skupna višina: 2.500 mm, skupna masa: 4.000 kg, delovna višina: 950 mm, dolžina obdelovanca (maks.): 102 mm, Double-sided deburring in just one pass – with 100% reproducible results and precise processing of both internal and external edges: only the EdgeRacer 1500 D offers this. The double-sided deburring EdgeRacer 1500 D is the right choice for precise double-sided deburring and edge rounding. In addition to flat sheets, it can also process sheets with beads, notches, threaded holes, and similar features. The maximum workpiece height is 102 mm. The brushes working from above and below can be adjusted independently. Thanks to the roller conveyor, the adjustment can also take place below or above roller table level. Iaedpfx Aeucw Rboa Usr

Stanje: novo, Condition: New Delivery time: approx. 12 weeks from order Country of origin: Italy Price: €57,900 Leasing rate: €1,094.31 Bestseller 1 Working width: 650 mm Sheet thickness range – mild steel: 0.5 – 170 mm Abrasive belt dimensions: 670 x 2200 mm Extraction capacity: 4,000 m³/h Dust extraction port: 120 mm diameter Compressed air connection: 6 bar Noise level: 78 (+/-2) dB Motor power: 22 kW Length: 2,600 mm Width: 1,350 mm Height: 2,100 mm Weight: 1,125 kg WITH 2 WORKING UNITS: 1 X ABRASIVE BELT AND 1 X BRUSH UNIT, TOP SIDE The machine features a stress-relieved, welded steel frame for a stable and rigid structure. Motorized height adjustment of the work table via 4 synchronized spindles. Independent drive motors for each working unit. Extraction hoods inside the machine, one per station. Touch screen for: * Automatic star-delta switching of main motors * Analog ammeter for each unit * Digital sheet thickness display with decimal point accuracy * Material thickness setting (+/- 0.1 mm) * Machine status monitoring with alarm notifications FEED SYSTEM Robust steel construction with wear-resistant surface. Vacuum conveyor belt available on request. Variable feed speed via frequency inverter: 0.6 to 6.5 m/min. Rubber conveyor belt, oil- and heat-resistant. Automatic conveyor belt centering. Side guides to prevent belt lift-off. Rubber pressure rollers before and after each station, oil- and heat-resistant. Idler rollers at front and rear tables. INCLUDES OPTIONAL TAMPICO BRUSH FOR CONVEYOR BELT CLEANING 1st WORKING UNIT – R Balanced contact roller with oil- and heat-resistant nitrile rubber coating. Adjustable via eccentric shaft for working position and compensation for abrasive belt wear. Pneumatic cylinders for automatic positioning as well as lift-off in case of emergency stop. Can be equipped with abrasive belts and/or Scotch Brite. Motorized adjustment and electronic control of contact roller height. Motor with variable speed and automatic emergency brake. Pneumatic abrasive belt tensioning. Abrasive belt centering system with electronic photo sensor. Oscillation adjustment for width and timing. Contact roller adjustment accuracy: +/-0.02 mm Contact roller adjustment speed: 10 m/s Contact roller diameter: 125 mm Rubber roller hardness: 55 Shore Contact roller adjustment stroke (grit compensation, up/down): 8 mm Abrasive belt speed: 3–18 m/s Motor power: 7.5 kW 2nd WORKING UNIT – X 2 rows of vertical brushes, 4 rotate clockwise and 4 counterclockwise. Oscillating traverse movement of the entire unit. Quick-change brush holders. Brush diameter: 115 mm Number of brushes: 8 pcs. Oscillation stroke: 15 mm Rotation motor power: 2.2 kW Rotation speed: 1,000 rpm Oscillation motor power: 0.37 kW Abrasive brush speed: 10.0 m/s Optional equipment: B Unit – external horizontal drum brush Ø 150 mm * with Scotch Brite brush: €5,150.00 * with 0.3 mm wire brush: €6,060.00 R UNIT – ABRASIVE BELT Motor 11 kW: €740.00 X UNIT – CUP BRUSHES Motor with variable speed 5.5 kW 350/1100 Included OPTIONS: Return to Sender system (workpiece is returned to operator): €1,770.00 Conveyor belt with vacuum system – 3.0 kW: €5,150.00 Iaodpfxswiqukj Aa Ujr

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 84659300, Stroj je sestavljen iz 3 delovnih enot: 1. XSV ščetke (12 rotirajočih in nihajnih ščetk) 2. XSV ščetke (12 rotirajočih in nihajnih ščetk) 3. Valjasta ščetka Dovajalni trak 1350 mm. Isdpfx Aaexn Ifuo Usar

Stanje: zelo dobro (rabljeno), Leto izdelave: 2026, Timesavers Serie 10 Manual Deburring Machine This machine is a demonstration unit, which has occasionally been used for demonstrations. Very simple operation and comfortable handling. Features a grippy rubber conveyor belt as well as an additional vacuum zone for small parts. Iasdpfjfhb N Sex Aa Uer Speed is infinitely adjustable. The machine is located in our warehouse and can be inspected, tested, and accepted under power at any time.

Stanje: novo, Leto izdelave: 2025, Specifikacije stroja za zaobljenje robov TFON: Isdpfx Ajui Ih Rea Ujar Združljivost materialov: jeklo, aluminij, nerjavno jeklo. Proces: zaobljenje robov. Debelina materiala: 0 – 120 mm. Največja širina materiala: 1.000 mm. Minimalne dimenzije kosa: 50 × 50 mm. Največja teža materiala: 500 kg. Hitrost transporterja: 0,6 – 4,0 m/min. Teža stroja: 3.000 kg.

Stanje: novo, Leto izdelave: 2025, - TFON Kantenverrundungs- & Oberflächenbearbeitungssystem Für maximale Vielseitigkeit und Präzision entwickelt, ist dieses System ausgelegt zur Bearbeitung von Baustahl, Aluminium und Edelstahl mit Materialstärken von 0 bis 120 mm. Es bietet fortschrittliche Kantenverrundungs- und Oberflächenreinigungslösungen, optimal abgestimmt auf anspruchsvollste industrielle Anwendungen. - Materialkompatibilität: - Baustahl, Aluminium, Edelstahl - Bearbeitbare Materialstärken: - 0 – 120 mm Kantenverrundung: Radius 2 Kantenverrundung für glatte, sichere Kanten – verbessert Optik und Funktionalität. Präzise Steuerung: Integriertes Siemens-Automatisierungssystem für exakte und gleichbleibende Prozesskontrolle. Unabhängige Bearbeitungsstationen: Mehrere Stationen ermöglichen simultane oder sequenzielle Bearbeitung, für flexible Arbeitsabläufe. Tischgrößen: Verfügbar mit 650 mm, 1000 mm oder 1300 mm Arbeitsbreite – passend für vielfältige Produktionsanforderungen. Tischvarianten: Magnet-, Vakuum- oder Magnet-Vakuum-Tische bieten sichere, anpassungsfähige Aufspannung für verschiedenste Materialien und Werkstückgrößen. Plasma- & Sauerstofftechnik: Modernste Plasma- und Sauerstoffsysteme entfernen effizient starke Grate und Schlacke nach dem Schneiden, für saubere Oberflächen. Oberflächenreinigung: Beseitigt effektiv Schmutz, Rost, Oxide und Zunder – ideale Vorbereitung für nachfolgende Prozesse wie Schweißen oder Beschichten. Iajdpfx Aei E Tkasa Uor Kantenverrundung für Beschichtung: Erzeugt gleichmäßige, fehlerfreie Kanten – perfekt für Lackier- und Beschichtungsanwendungen. Einsatzbereiche: Stahlhandel, Energiewirtschaft, Bergbau, Bauwesen, Automotive – konstruiert für hochbelastbare und leistungsstarke Anwendungen. Gleichmäßiges Kantenbild: 8 Lamellenräder sorgen für konstanten Radius an jeder Kante. Pneumatisches Oszillationssystem: Verlängert die Lebensdauer der Schleifbänder und gewährleistet gleichbleibende Leistung durch verschleißarme, pneumatische Oszillation. Für industrielle Präzision konstruiert. Für Langlebigkeit gebaut. Für vielseitige Anwendungen entworfen. TFON – Exzellenz in Kantenbearbeitung und Oberflächenvorbereitung.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2022, - Rabljeni stroj za brušenje robov iz serije Surfacer TFON RB-2510. - TFON RB-2510 je zanesljiv, dobro vzdrževan rabljen stroj, pripravljen za takojšnjo uporabo. Iajdpfoiih Aaox Aa Usr - Predhodno je bil izključno uporabljen v naši lastni proizvodnji za posnemanje robov in zaobljanje robov. Naprava je v odličnem delovnem stanju in popolnoma funkcionalna. Izkazala se je kot zanesljiva in vzdržljiva izbira za dolgoročno uporabo v vaši proizvodni liniji.

Stanje: novo, Leto izdelave: 2025, -Stroji po meri, prilagojeni vašim proizvodnim potrebam. -Naši stroji po meri so natančno zasnovani in izdelani tako, da ustrezajo specifičnim zahtevam vaših proizvodnih procesov. Ne glede na to, ali gre za dodelavo, odstranjevanje oksida ali zaobljanje robov, ti stroji zagotavljajo izjemno natančnost in zmogljivost. -Dodelava (Finishing): Za doseganje gladke, visokokakovostne površinske obdelave na različnih materialih, ki zagotavlja stalen profesionalen in poliran videz. -Odstranjevanje oksida: Učinkovito odstranjevanje površinskih oksidov za čisto, neonesnaženo površino – ključno za nadaljnjo obdelavo ali nanos premazov. -Zaobljanje robov: Natančno zaobljanje robov po vaših specifikacijah izboljša varnost ter celotno kakovost končnih izdelkov. Možnosti prilagoditve Iajdpfohq Dbxox Aa Usr Vsak stroj je zasnovan posebej po vaših zahtevah in omogoča prilagodljivost pri: Hitrosti obdelave: Nastavljiva hitrost, ki sledi vašemu tempu proizvodnje. Posebne funkcije: Možnosti vključujejo sisteme za odsesavanje prahu in dima, nastavljive pritiske ter programabilne konfiguracije za optimalen potek dela. Zgrajeni za dolgo življenjsko dobo. Naši stroji po meri so izdelani za dolgotrajno in zanesljivo delovanje skozi dolga proizvodna obdobja. Ne glede na to, ali gre za manjše projekte ali zahtevno industrijsko proizvodnjo, ti stroji leto za letom zagotavljajo vrhunske rezultate.

Stanje: novo, Leto izdelave: 2025, - TFON natančen sistem za zaobljanje robov in površinsko obdelavo Iaodpfohq Dbmex Aa Usr Zasnovan za vrhunsko površinsko obdelavo in natančno zaobljanje robov v različnih materialih in industrijah, sistem TFON združuje napredno avtomatizacijo z raznolikimi konfiguracijami, ki ustrezajo vašim specifičnim proizvodnim zahtevam. - Združljivo z materiali: Primeren za uporabo na aluminiju, nerjavnem in konstrukcijskem jeklu. - Velik razpon debelin: Učinkovito obdeluje materiale debeline od 0 do 120 mm. - Vrhunski rezultati obdelave: Konstruiran za doseganje kakovostne površinske obdelave, ki izboljša estetiko in funkcionalnost izdelka. - Industrijska vsestranskost: Idealen za medicinske naprave, profesionalno kuhinjsko opremo, avtomobilske dele in kovinske dodatke. - Natančno zaobljanje robov: Omogoča natančno zaobljanje robov z radijem 2, s čimer povečuje varnost in vizualni učinek končnega izdelka. - Napredna avtomatizacija: Vgrajen Siemensov krmilni sistem zagotavlja visoko natančnost in zanesljivo delovanje. - Neodvisne delovne postaje: Omogočajo prilagodljivo in učinkovito večstopenjsko obdelavo, prilagojeno kompleksnim proizvodnim procesom. - Različne širine miz: Na voljo z delovnimi mizami širine 650 mm, 1000 mm ali 1300 mm za najrazličnejše proizvodne potrebe. - Prilagodljive možnosti transporterja: Možnost izbire vakuumskega, polmagnetnega ali polvakuumskega transporterja za varno in zanesljivo rokovanje s kosi. - Čiščenje površin: Učinkovito odstranjuje rjo, okside in površinske nečistoče ter tako pripravi kose za nadaljnjo obdelavo. - Izboljšana varnost upravljavca: Postaja za zaobljanje robov zmanjša tveganje za ureznine in poškodbe zaradi ostrih robov. - Vrhunska površinska obdelava: Opremljen s tehnologijo Scotch-abraziva za enakomerno in gladko obdelavo. - Podaljšana življenjska doba abrazivov: Pnevmatski oscilacijski sistem podaljša življenjsko dobo brusnega traku in Scotch-abraziva ter zmanjšuje izpade stroja. - Konstanten radij obdelave: Šest lamelnih brusilnih kolutov zagotavlja enakomeren radij robov pri vseh kosih za dosledno kakovost. Konstruiran za zmogljivost. Oblikovan za varnost. Ustvarjen za industrijsko vsestranskost. TFON – popolnost površin, vsakič.

Stanje: novo, Leto izdelave: 2025, - TFON Sistem zaobljenja ivica i površinske dekontaminacije. - Kompatibilnost materijala: Pogodno za nisko-ugljenični čelik, aluminijum i nerđajući čelik. - Radni spektar debljine: Obrađuje materijale debljine od 0 do 120 mm. - Zaobljenje ivica: Obezbeđuje zaobljenje ivica radijusa 2, za glatke i sigurne ivice koje unapređuju izgled i funkcionalnost izratka. Iasdehq A T Ujpfx Aa Usr - Precizna kontrola: Opremljen Siemens automatskim sistemom za preciznu i doslednu kontrolu tokom celokupnog procesa. - Nezavisne stanice: Više procesnih stanica omogućava raznovrsne operacije – različiti zahvati mogu se izvoditi istovremeno ili uzastopno. - Opcije radne površine: Dostupne dimenzije radnih stolova: 650 mm, 1000 mm ili 1300 mm, u zavisnosti od potreba proizvodnje. - Tipovi stolova: Fleksibilne konfiguracije uključuju magnetne, vakuumske ili magnetno-vakuumske stolove, što omogućava sigurno fiksiranje raznih materijala i veličina delova. - Plazma i kiseonička tehnologija: Koristi naprednu plazma i kiseoničku tehnologiju za efikasno uklanjanje debelih strugotina i šljake nakon sečenja, omogućavajući čistiju i glatkiju površinu. - Površinska dekontaminacija: Efikasno uklanja površinske nečistoće kao što su rđa, oksid ili skala, pripremajući delove za dalje procese. - Zaobljenje ivica za potrebe zaštitnog premaza: Savršeno priprema površinu za farbanje i nanošenje zaštitnih premaza, obezbeđujući ravnomernu i besprekornu završnu obradu. - Industrijske primene: Idealan za centre za obradu čelika, energetiku, rudarstvo, građevinsku i automobilsku industriju – prilagođena rešenja za zahtevne primene. - Ujednačeni rezultati: Šest lamelnih točkova radi sinhronizovano, obezbeđujući konstantne, jednako zaobljene ivice na svakom delu. - Pneumatski sistem oscilovanja: Produžava vek trajanja brusnih traka minimiziranjem habanja i održavanjem stalnog kvaliteta obrade tokom vremena.

Stanje: novo, Leto izdelave: 2025, - TFON sistem za natančno zaobljanje robov in končno obdelavo površin. - Zasnovan za vrhunsko obdelavo površin in zaobljanje robov pri najrazličnejših materialih in industrijskih panogah. Sistem TFON združuje napredno avtomatizacijo z raznolikimi konfiguracijami, da zadovolji vaše specifične proizvodne potrebe. Primeren materiali: Primeren za uporabo pri aluminiju, nerjavnem jeklu in konstrukcijskem jeklu. Širok razpon debelin: Učinkovito obdeluje materiale debeline od 0 do 120 mm. Vrhunska končna obdelava: Konstrukcijsko zasnovan za visokokakovostno obdelavo površin, ki izboljšuje estetiko in funkcionalnost končnega izdelka. Industrijska vsestranskost: Idealen za industrije medicinskih naprav, profesionalne kuhinjske opreme, avtomobilskih delov in kovinskih dodatkov. Natančno zaobljanje robov: Omogoča precizno zaobljanje robov z radijem 2 mm, kar povečuje varnost in izboljšuje videz izdelka. Napredna avtomatizacija: Integriran Siemensov krmilni sistem zagotavlja večjo natančnost in operativno zanesljivost. Neodvisne procesne postaje: Omogočajo fleksibilno in učinkovito večstopenjsko obdelavo, prilagojeno zahtevnejšim delovnim procesom. Več možnosti širine delovne mize: Na voljo z delovno širino 650 mm, 1000 mm ali 1300 mm za različne potrebe proizvodnje. Prilagodljive možnosti transportnega traku: Izbirate lahko med vakuumskim, pol-magnetnim ali pol-vakuumskim transportnim trakom za varno in zanesljivo manipulacijo obdelovancev. Površinsko čiščenje: Učinkovito odstranjuje rjo, okside in površinske nečistoče ter pripravi obdelovance na nadaljnjo obdelavo. Izboljšana varnost operaterja: Postaja za zaobljanje robov zmanjša tveganje za ureznine in poškodbe zaradi ostrih robov. Visoka zmogljivost končne obdelave: Opremljen s Scotch abrazivno tehnologijo za gladko in enakomerno obdelavo površin. Podaljšana življenjska doba abrazivov: Pnevmatski oscilacijski sistem povečuje življenjsko dobo abrazivnih trakov in Scotch materialov ter zmanjšuje zastoje. Ijdpfxehq A Txo Aa Uoar Enoten izhodni radij: Šest lamelnih diskov zagotavlja enakomeren radij robov na vseh obdelovancih za dosledno kakovost. Zasnovano za zmogljivost. Izdelano za varnost. Ustvarjeno za industrijsko vsestranskost. TFON – popolnost površin, vsakič znova.

Stanje: novo, Leto izdelave: 2025, -TFON Lite SURFACER® serija. Iodpfx Aaeqzxhyo Uear TFON Lite SURFACER® serija omogoča hkratno obdelavo več kosov in izjemno prilagodljivost zahvaljujoč široki paleti potrošnih materialov ter učinkoviti vakuumski mizni enoti. Uporabniku prijazna zasnova omogoča hitro menjavo ščetk in možnost namestitve dveh različnih ščetk za vaše specifične potrebe. Ščetke so nameščene vzporedno z mizo, kar zagotavlja brezhibno brušenje pri vsakem prehodu. Ergonomska zasnova omogoča, da težo motorja nosi sama konstrukcija stroja, kar močno zmanjšuje utrujenost operaterja in povečuje varnost pri delu. S TFON-ovo zanesljivo garancijo SURFACER® serija predstavlja optimalno ravnovesje med minimalnimi obratovalnimi stroški in maksimalno kakovostjo površinske obdelave. Ključne tehnične specifikacije: -Minimalna velikost materiala: 80 × 80 mm Debelina materiala: 3 – 200 mm Maksimalna širina materiala: 800 mm Maksimalna dolžina materiala: 500 mm.

Stanje: dober (rabljeno), Leto izdelave: 2011, Edges and contours - Deburring machine Iedpfx Aajwnpflo Usar ROLEI Type: 00645-KKE2, year 2011.

Stanje: rabljeno, Leto izdelave: 2023, Condition: Used Year of manufacture: 2023 Stock number: 5542 Delivery time: Prompt, subject to prior sale Country of origin: Italy Price: €11,600 Available in stock: 1 Working width: 1300 mm Sheet thickness range – mild steel: 150 mm Brush diameter: 150 mm Iaodpfswiryhjx Aa Ujr Vacuum area: 250x350 mm Table height: 945 mm Motor: 0.75 kW Length: 1400 mm Width: 1000 mm Height: 1450 mm Weight: 300 kg Demonstration machine / as new condition Net price (original price €13,600.00) The Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding, and polishing for a range of materials – stainless steel, steel, copper, brass, and aluminium. The grinding head with two rotating tools (grinding disc or brush) is mounted on a swivel arm. The Easy T features an infinitely adjustable speed and a vacuum system, enabling the workpieces to be fixed securely to the table. It is a cost-effective and efficient solution for conventional grinding and deburring. All edges of the workpiece are processed from every angle and direction. The grinding head can be rotated by 180°, allowing for quick tool changes. Features: * Grinding pressure applied manually * Easy operation, low operating costs The flap brush ensures precise rounding of the edges of the workpiece. Standard brushes have a diameter of 150 mm. For deburring, a support pad with a grinding disc is used. Depending on the height and hardness of the burr, the grinding disc can be set at a slight angle to apply greater pressure to the burr.

Stanje: zelo dobro (rabljeno), Product information: "POLY-PTX 800 Satin Finishing Machine" From the inventor of the longitudinal grinder. Our multifunctional longitudinal grinder featuring a 1750 W motor, variable speed control, ergonomic design, and versatility—also suitable for working widths up to 150 mm. High torque and power reserves ensure professional, continuous operation and enhanced profitability. Features: - Infinitely variable speed adjustment from 1000 to 3800 min⁻¹, with a tachogenerator ensuring constant speed even under load. - Grinds from coarse to the finest grades. - Balanced, straightforward manual guidance without support rollers. This enables free movement (oscillation effect). Guarantees shadow-free, seamless, highly decorative surfaces in satin, matte, and industrial finishes. - Satin finishes, mirror-polishes, and enhances stainless steel, steel, non-ferrous metals such as brass, bronze, copper, aluminium, as well as wood. - Ultra-fine grinding on large surfaces without shadows or edges. - Removes welds, deep scratches, rust, dirt, paint layers, and oxides. - Achieve everything from rough grinding to mirror polishing of stainless steel and non-ferrous metals in just three steps. - Also ideally suited as a tube/pipe grinder using a belt roller attachment. - Grinds and polishes open and closed tubular structures. - For pipe processing, the “hole system” enables safe and rapid connection of non-woven and felt belts to closed tubular structures. No complicated adhesive bonding required. - Extensive selection of grinding tools offering a solution for every task. - Rubberized handle for optimal operation! Scope of delivery: - 1 POLY-PTX® 800 base unit - 1 robust, impact-resistant plastic carry case - 1 QUICK-LOCK 4 m cable - 1 POLY-PTX® clamping screw - 1 non-woven wheel, 100 mm width Device type: Satin finishing machine Iajdpsu Su Tzsfx Aa Ujr Cord/battery: Corded Compatible tools: Brushes, sleeves, polishing rings, wheels Plug/power connection type: EU (C+F) 220–240 V ~ 50–60 Hz Power consumption: 1750 watts Max. tool dimension: Diameter 115 x width 100 mm Tool holder: 19 mm splined shaft WEEE reg. no: DE 51395731 Speed (min⁻¹): 1000 - 3800

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, delovna širina: 1.525 mm, najv. debelina pločevine: 100 mm, skupna masa: 6.400 kg, La série 42 offre la solution pour les fabricants qui fournissent des produits de qualité supérieure. Cette qualité exceptionnelle est obtenue grâce à un agrégat de brosses multirotatives doté de 8 brosses lamellaires abrasives, qui assurent un ébavurage uniforme et un arrondi parfait des arêtes du métal. Machine à brosses rotatives multidirectionnelles (RB), pour l’ébavurage homogène et la finition des pièces planes en tôle. Un traitement complet en un seul passage, la surface de la pièce étant dotée d’une finition de surface non directionnelle. Équipée d’un ou plusieurs agrégats à bande abrasive (W) pour le pré-ébavurage et la finition fine. Agrégat à brosse coupelle (TB) pour l’ébavurage, la cassure d’arêtes, la finition non directionnelle ou l’élimination de la calamine. Ijdpfx Aaexw Ih Us Usar - Agrégat à bande abrasive (auto-étalonnant) - Agrégat à brosse coupelle (auto-étalonnant) - Agrégat à brosses rotatives avec 8 brosses (auto-étalonnant)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, delovna širina: 1.100 mm, najv. debelina pločevine: 100 mm, Serija 32 RB ponuja rešitev za proizvajalce, ki zagotavljajo izdelke v vrhunski kakovosti. Ta visoka kakovost se doseže z večrotacijskim krtačnim agregatom s štirimi abrazivnimi lamelnimi ščetkami, ki enakomerno odstranjujejo robove (odiglujejo) in popolno zaokrožijo robove kovine. Večsmerni rotacijski brusni stroj s krtačami (RB) omogoča enakomerno odstranjevanje robov in fini brus ploščatih kovinskih delov. Postopek omogoča enostransko obdelavo v enem prehodu, pri čemer je površina dela obdelana z brezsmernim površinskim finišem. Opremljeno je z enim ali več brusnimi tračnimi agregati (W) za predhodno odstranjevanje robov in fini brušenje. - Brusni tračni agregat Iaedpfjxw Ikcox Aa Uor - Rotacijski krtačni agregat (samokalibrirajoč) - Brusni tračni agregat

Stanje: rabljeno, Leto izdelave: 2008, Working Width / mm Workpiece Height / mm Workpiece Thickness: 1-70 mm Minimum Workpiece Length: 350 mm Minimum Workpiece Length with Magnetic or Vacuum Conveyor: 80 mm Band Filter Unit Volume Ab=900 approx. 350 l Band Filter Unit Volume Ab=1400 approx. 400 l Constant Working Height 1000 mm Feed Speed 2/4 m/min Feed Speed, stepless adjustment: 1.5-8 m/min Operating Voltage 400 VAC Control Voltage 24 V DC, 230 VAC Frequency 50 Hz Compressed Air Connection R 3/8" Minimum Compressed Air Pressure 5 bar Minimum Compressed Air Volume EMSN II +2F 10 NI/min Minimum Compressed Air Volume EMSN II /L +2F 80 NI/min Total Electrical Connection See Layout Plan Machine Weight, Working Width 900 mm approx. 4200 kg Machine Weight, Working Width 1400 mm approx. 5100 kg Machine Weight, Working Width 1540 mm approx. 5600 kg Abrasive Belt Dimensions, Sanding Drum AB=900: 1540 mm length x 900 mm width Abrasive Belt Dimensions, Sanding Drum AB=1400: 1540 mm length x 1400 mm width Abrasive Belt Dimensions, Sanding Drum AB=1540: 1540 mm length x 1540 mm width 5. Technical Description The machine operates using a wet grinding process and may only be used with a suitable grinding emulsion. A band filter system is responsible for filtering grinding dust out of the emulsion. The machine is equipped with an elastic grinding drum, which is used for regrinding and burr removal. Two counter-rotating flap brush rollers or, alternatively, stainless steel brush rollers are then used for edge rounding. Two subsequent spring steel brushes are used to remove oxide layers from the cut surfaces. Within the machine, pressure rollers hold the workpieces down on the continuous conveyor belt to ensure they remain in position during the grinding process, which determines the minimum workpiece length of 350 mm. At the machine's outlet, there is an integrated drying unit that dries the workpieces before they exit the machine. The machine is fitted with a continuous conveyor belt for workpiece transport. Special configurations may include an integrated vacuum extraction unit or magnetic conveyor, making it possible to process smaller workpieces. For non-magnetic small parts, a minimum length of 80 mm with a minimum area of 200 cm², and for magnetic small parts, a minimum length of 80 mm with a minimum area of 40 cm² is required. All grinding and brush elements are equipped with spray tube nozzles, which continuously spray the tools with emulsion, enabling the processing of aluminum and its alloys. The grinding residue is carried by the emulsion to the band filter unit and captured by an appropriate filter fleece. ERNST Automatic Sheet Metal Deburring Machine with Wet Grinding System Isdpfx Aajinwwzs Uoar Type EM 5 N/II/L + 2 F 1400 Year of Manufacture 2008 Factory No. 780063 Machine/Equipment: Sheet metal deburring machine with wet grinding system for stamped, laser-cut, and nibble parts of various materials, featuring a flexible sanding drum and two flap brushes for especially high edge rounding.

Stanje: zelo dobro (rabljeno), Gebrauchte Gecam - Euro Fintec 128 Rohrschleifmaschine / Bandschleifer / Poliermaschine zu verkaufen Fintec 128 Rohrbearbeitungsmaschine zu verkaufen Iajdpfswbh Dyjx Aa Uor Kann unter Strom mit Ihren Stahlrohren vorgeführt werden.

Stanje: rabljeno, Leto izdelave: 2024, številka stroja/vozila: SN071679, 12 mesecev garancije, 1800 delovnih ur Iajdpfxjx A Tgms Aa Usr

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Iedpet Hw Iisfx Aa Uear Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: rabljeno, Wide Belt Sander Used Make: TimeSaver Model: WRB Series Machine No. 2480-19 Dry-working deburring/edge rounding machine with contact rollers and a rotary brush unit Max. working width: 1350 mm Abrasive belt dimensions (W x L): 1350 x 1900 mm Brush outer diameter: 530 x 350 mm Table opening: 0.8–100 mm Min. part size: 50 x 50 mm Brush speed: 6–17 m/sec Abrasive belt speed: 11 m/sec Feed speed: 0.2–8 mm/sec Power consumption: Unit W: 11.0 kW Iaedpfx Asudb R Ioa Usr Unit RB: 1.5 kW Brushes: 4 x 1.5 kW Connection: 400 V, 50 Hz Compressed air required: 6 bar Total consumption: 25 l/min Including ceramic brush set R plus 350 x 530 mm and zirconium brush set, grit 180 Machine has been completely overhauled (refurbished) New conveyor belt installed Application Area: Abrasive belt roller unit W: Pre-deburring with abrasive belt or Scotch-Brite belt Removal of heavy burrs Applying a sanding or brush finish Repairing a sanding or brush finish RB unit: Deburring and edge rounding of flat and contoured parts Weight: 6,200 kg

Stanje: kot nova (razstavni stroj), obratovalne ure: 170 h,