Stroj za odstranjevanje napak iz pločevine

TFON Surfacer® TF-RB 2510

Stanje: rabljeno, Leto izdelave: 2007, Turning diameter 300 mm Swing diameter over bed 430 mm Swing diameter over cross slide 300 mm Control SIEMENS, SINUMERIK 840 D Travel path - X 160 mm Travel path - Z 510 mm Maximum workpiece length 480 mm Main spindle bore 53 mm Main spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Main spindle motor 15 kW Sub-spindle bore 53 mm Sub-spindle speed 0 - 7000 rpm Spindle nose DIN 55026 A2-5 Spindle torque 100 Nm Sub-spindle motor 15 kW C-axis resolution 0.001° C-axis rapid traverse 1000 rpm Tool turret 1 x 12 stations Number of driven tool stations 12 Tool holder shank (DIN 69880) VDI 25 Speed of driven tools 0 - 8000 rpm Torque 16 Nm Power 4 kW Feed force X/Z-axis 4000 / 6000 N Rapid traverse X-axis 24 m/min Rapid traverse Z-axis 30 m/min Total power requirement 38 kVA Machine weight approx. 4 t Machine dimensions L x W x H 2.65 x 1.84 x 2.32 m Accessories: Collet chuck 173 E on main spindle, Collet chuck 163 E on sub-spindle, Bar loader manufacturer FMB, type turbo 3-36/3200 A, Year 2018 for bar diameters up to 36 mm and bar lengths Rodswx R Rkjpfx Ag Tsp up to 3200 mm Various tool holders for turret (no driven holders), Coolant system

Stanje: rabljeno, Leto izdelave: 2016, Operating hours machine: 5,320 h Max. feed width: 300 mm Processable sheet thickness: 1-15 mm Voltage: 400V / 50 Hz Rated current: 13.5 A Rated power: 7.5 kW Protection class: IP42 Infinitely variable feed rate: 0-2 m/min Length: 2,600 mm Width: 2,300 mm Height: 1,300 mm Machine weight: 1,900 kg Standard equipment - With vacuum table for processing steel, stainless steel, and aluminium for part sizes from 45 x 45 x 1 mm up to a maximum of 200 x 200 x 15 mm (geometry-dependent) - Time-consuming turning and reworking of parts is eliminated - Thanks to the innovative swivelling station, parts with an edge length of more than 200 mm can also be processed on one side by folding away the station - High degree of automation enables economical and process-safe processing of large quantities of parts - High and consistent processing quality - Dry processing (no chemical additives required, as is the case with vibratory finishing) - Small parts are discharged on the loading side and collected in a catch box - No additional walking routes for the operator - Energy efficient - The processing principle ensures uniform tool wear across the entire working width - Fast and simple tool change - Simple and intuitive machine operation - Modern, compact machine design Additional equipment Rodpev N I Hlefx Ag Tep Lissmac DDE 1500 extraction unit

Stanje: rabljeno, Leto izdelave: 2007, dolžina zabojnika: 40 čevelj, barva: svetlo siva, skupna masa: 30.480 kg, lastna masa: 3.745 kg, prostornina tovornega prostora: 67,7 m³, širina tovornega prostora: 2.352 mm, dolžina tovornega prostora: 12.032 mm, višina nakladalnega prostora: 2.390 mm, Dear Sir or Madam, Thank you for your interest in the container from MT CONTAINER GmbH, Hamburg. Sea containers are wind- and watertight large-capacity units for the transport of goods by sea, land, or air freight. These ISO-standardized containers can be loaded, unloaded, and stacked quickly and easily. High Cube containers have the same footprint as standard containers but are constructed with extra height. While maintaining the same width and length, their increased height offers greater volume for additional cargo. Unlike standard containers with a height of 2,591 mm, High Cube containers feature a height of 2,896 mm. _____ This listing is for a: 40 ft High Cube Container _____ Our containers feature: ✅ Inspected and certified ✅ Valid CSC plate (container 'TÜV') ✅ Painted in light grey (custom colour upon request) ✅ Wind and watertight ✅ Odour-neutral interior Rsdpfjh Hm U Hsx Ag Tsp _____ Container specifications: External dimensions ■ L 12,192 mm x W 2,438 mm x H 2,896 mm Internal dimensions ■ L 12,032 mm x W 2,352 mm x H 2,698 mm Door opening ■ W 2,340 mm x H 2,585 mm Volume ■ 76.4 m³ Euro pallets ■ Up to 25 Other data: Tare weight ■ 3,880 kg Payload ■ 28,620 kg Gross weight ■ 32,500 kg Intended use: Dry cargo transport _____ ⭐ Additional services ■ Expert, no-obligation advice ■ Transport and delivery with or without container unloading (can be organised at additional cost) ■ Steel frame, stainless steel walls & aluminium floor ■ Custom paint finish/RAL colour of your choice ■ Lighting installation and electrical equipment available ■ Access ramp on request ■ Container support legs available ■ Accessible by pallet truck and forklift _____ ■ All prices are net and exclusive of VAT. ■ Inventory levels change daily; please request a current quote ■ Images are for reference only _____ Do you have further questions about containers or would you like a no-obligation offer? Feel free to call us or send your inquiry. We also welcome you to visit our container depot at Hamburg port. _____ *Important Note: The legal notice, information and the link to the EU Commission’s online dispute resolution platform, our General Terms and Conditions with customer information and privacy notice, as well as the cancellation policy and model withdrawal form, can be viewed by clicking on “Legal Information.” This ad serves solely as a basis for later contract negotiations. It does not constitute a binding offer or an invitation to make such an offer. If you are interested in the product, please send us a non-binding message by [email], [phone], [fax], or [post] to the contact details provided under “Legal Information,” or [using the “Send Message” function], stating your [email address], [fax number], or [postal address]. We will then provide you with a binding offer and our GTC with customer information as well as the privacy notice.

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Rodpfx Agjd Ev Upe Tep Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, Isitan Hydraulic 4-Roller Plate Bending Machine Model: 4R HMS 1270 x 130 Top and bottom rollers driven Hydraulic side roller adjustment 3 digital position displays Hydraulic drop end Hardened rollers Cone bending device Separate control panel Usable length: 1270 mm Top roller diameter: 130 mm Side roller diameter: 130 mm Total motor power: 3.3 kW Working speed: 5 m/min Weight: 2150 kg Dimensions (mm): 3200 x 1150 x 1110 (L x W x H) Bending capacity: 5 mm Pre-bending capacity: 4 mm All bending capacities are calculated based on 250 N/mm² yield strength Rsdpfx Agsiffwqj Tep Material: (ST 37 - ST 42 structural steel)

Stanje: novo, Leto izdelave: 2025, premer valja: 140 mm, dolžina valja: 1.570 mm, - Capacity 1570 x 4.5 mm - Electrically adjustable rear roll - Electrically adjustable bottom roll (material clamping) - Digital readout for rear roll movement Redpfx Aegg Nv Isg Tsp - Digital readout for bottom roll movement (material clamping) - Hardened rolls - Conical rolling - Brake motor - Emergency stop - Documentation - 400V

Stanje: novo, zadnji prislon: 750 mm, - Capacity 1050 x 6 mm - NC electric backgauge - Foot pedal - Rear photocell safety guard - Support arms Rodjgg N Hbspfx Ag Tjp - Cutting line illumination - Brake motor - Emergency stop - Documentation - Weight: 1800 kg - 400V

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. Rsdpfjd Ixadsx Ag Tjp The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump flow rate: 40 m³/h Pump power: 1.5 kW Sound level: 70 dB Redpfxou Egp Ij Ag Tep Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1750 mm Weight: 950 kg

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Redpfx Agsnah Tae Tsp Please contact us for more information and images via email (at) or