Stroj za odstranjevanje napak iz pločevine

ERNST EM5N II + 2F

Working Width / mm
Workpiece Height / mm

Workpiece Thickness: 1-70 mm
Minimum Workpiece Length: 350 mm
Minimum Workpiece Length with Magnetic or Vacuum Conveyor: 80 mm
Band Filter Unit Volume Ab=900 approx. 350 l
Band Filter Unit Volume Ab=1400 approx. 400 l
Constant Working Height 1000 mm
Feed Speed 2/4 m/min
Feed Speed, stepless adjustment: 1.5-8 m/min
Operating Voltage 400 VAC
Control Voltage 24 V DC, 230 VAC
Frequency 50 Hz
Compressed Air Connection R 3/8"
Minimum Compressed Air Pressure 5 bar
Minimum Compressed Air Volume EMSN II +2F 10 NI/min
Minimum Compressed Air Volume EMSN II /L +2F 80 NI/min
Total Electrical Connection See Layout Plan
Machine Weight, Working Width 900 mm approx. 4200 kg
Machine Weight, Working Width 1400 mm approx. 5100 kg
Machine Weight, Working Width 1540 mm approx. 5600 kg
Abrasive Belt Dimensions, Sanding Drum AB=900: 1540 mm length x 900 mm width
Abrasive Belt Dimensions, Sanding Drum AB=1400: 1540 mm length x 1400 mm width
Abrasive Belt Dimensions, Sanding Drum AB=1540: 1540 mm length x 1540 mm width

5. Technical Description
The machine operates using a wet grinding process and may only be used with a suitable grinding emulsion.

A band filter system is responsible for filtering grinding dust out of the emulsion.

The machine is equipped with an elastic grinding drum, which is used for regrinding and burr removal. Two counter-rotating flap brush rollers or, alternatively, stainless steel brush rollers are then used for edge rounding. Two subsequent spring steel brushes are used to remove oxide layers from the cut surfaces.

Within the machine, pressure rollers hold the workpieces down on the continuous conveyor belt to ensure they remain in position during the grinding process, which determines the minimum workpiece length of 350 mm.

At the machine's outlet, there is an integrated drying unit that dries the workpieces before they exit the machine.

The machine is fitted with a continuous conveyor belt for workpiece transport.

Special configurations may include an integrated vacuum extraction unit or magnetic conveyor, making it possible to process smaller workpieces. For non-magnetic small parts, a minimum length of 80 mm with a minimum area of 200 cm², and for magnetic small parts, a minimum length of 80 mm with a minimum area of 40 cm² is required.

All grinding and brush elements are equipped with spray tube nozzles, which continuously spray the tools with emulsion, enabling the processing of aluminum and its alloys.

The grinding residue is carried by the emulsion to the band filter unit and captured by an appropriate filter fleece.


ERNST
Automatic Sheet Metal Deburring Machine with Wet Grinding System
Type EM 5 N/II/L + 2 F 1400
Year of Manufacture 2008 Factory No. 780063

Klsdpfxjinwwzo Al Nsr
Machine/Equipment:
Sheet metal deburring machine with wet grinding system for stamped, laser-cut, and nibble parts of various materials, featuring a flexible sanding drum and two flap brushes for especially high edge rounding.

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.