Stroj za odstranjevanje napak iz pločevine

ERNST EM 5 N/II/L + 2 B/1400

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital Itjdpfxet Hw Shj Ai Noi position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: novo, Leto izdelave: 2024, Bending force: 320 t Year of manufacture: New (delivery time 6-8 weeks) Control: DT 15 Bending length: 3050 mm Distance between uprights: 2600 mm Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed (max.): 140 mm / s R-axis travel range: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (dual guideway, aluminium) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motorized adjustment, linear guide and ball screw Backgauge finger with height adjustment (R-axis, manual) CE die holder system (upper dies) Front sheet support arms, sliding (with T-slot and stops) Hydraulic blocks and valves in special design according to internationally recognized standards Electrical equipment according to internationally recognized standards Options: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) Itedpjfifg Hefx Ai Nsi CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 l Length: 4300 mm Width: 1820 mm Height: 3230 mm Weight: approx. 17,250 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1994, številka stroja/vozila: SN1744271, Mostovno dvigalo ± 11.550 mm x 5.000 kg Itjdpfx Aijv Ipvxj Nji

Stanje: rabljeno, Leto izdelave: 2002, Stroj (dodatno): Vrtljivi žerjav Največja nosilnost: 2000 kg Iztegnjenost: 4 m Isdpexykvmofx Ai Njti Višina: 4,60 m

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2012, obratovalne ure: 55.771 h, laserske ure: 35.157 h, laserska moč: 3.200 W, najv. debelina pločevine: 20 mm, najv. debelina jeklene pločevine: 20 mm, maks. debelina aluminijaste pločevine: 8 mm, dolžina mize: 3.000 mm, širina mize: 1.500 mm, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 150 mm, hitrost pozicioniranja: 140 m/min, natančnost pozicioniranja: 0,02 mm, leto zadnje generalne obnove: 2024, dolžina podajanja os X: 3.000 mm, dolžina pomika po osi Y: 1.500 mm, dolžina podajanja os Z: 150 mm, Oprema: dokumentacija / priročnik, hladilna enota, varnostna svetlobna zapora, Laser je v obratovanju, možen ogled in preizkus. Redno servisiran, v dobrem tehničnem stanju. Vsa ogledala so bila popolnoma zamenjana leta 2024. Ijdpfx Ajv Hxbboi Neti

Stanje: novo, Leto izdelave: 2022, SPECIAL PRICE, stock machine year 2022, condition: new List price: €4,200 STOCK MACHINE – The ARG 235 plus is a manual metal bandsaw offering high cutting precision. This machine enables continuously adjustable mitre cuts from -45° to +30° (swivel range: 45° to the left and 60° to the right). Technical specifications: ● Cutting capacity: - 90° round: 235 mm / square: 230 mm / rectangular: 280 x 180 mm - 45° right round: 165 mm / square: 145 mm / rectangular: 185 x 180 mm - 30° right round: 115 mm / square: 80 mm / rectangular: 115 x 80 mm - 45° left round: 185 mm / square: 160 mm / rectangular: 185 x 100 mm ● Saw blade drive power: 0.9/1.4 kW / 400 V / 50 Hz ● Blade speed: 40 and 80 m/min ● Saw blade: 2710 x 27 x 0.9 mm Standard equipment: ● Powerful belt drive ● Infinitely variable feed adjustment from the operator panel ● Manual clamping of the workpiece, movable vice with dovetail guide Itsdpfemftv Rox Ai Nei ● Simple setting of the saw for mitre cuts by rotating the saw frame (stops at 45°, 60°, and 90°) ● 250 mm material stop without scale --> Also available in various sizes and configurations!

Stanje: rabljeno, Polavtomatski stroj za pihanje PET plastenk Proizvajalec: FERENC Tip: F-1400 Leto proizvodnje: 2006 Kapaciteta: cca 800 kosov/uro Število orodij v stroju: 2 x 5 L (pokrivka 48 mm) Dimenzije peči: - dolžina: 900 mm - širina: 900 mm - višina: 1200 mm Dimenzije pihalnega stroja: - dolžina: 1800 mm - širina: 750 mm - višina: 2000 mm Teža kompleta: 1200 kg Iedpeugu E Refx Ai Nsti Tehnično stanje: rabljeni stroj

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheet Metal / Flat Material, new The compact machining center for deburring, slag removal, derusting, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. Isdpfx Asnah Tdji Nsti Thanks to its fixed working height, this machine can be optimally integrated into a production line and is suitable for processing large components. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt length: 2620 mm Equipped as standard with a vacuum holding system, optionally with a magnetic holding system The use of 2620 mm long abrasive belts ensures a consistently smooth surface finish and reduces consumable costs due to the belts' longer lifespan. Thanks to the modular design of the machine, the optimal configuration for the customer's processing requirements can be offered. The machine structure can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine frame and feed table, in combination with advanced mechanics and electronics, make this series a universal machining center for deburring and final finishing. Please contact us for further information and images via email (at) or *

Stanje: rabljeno, Leto izdelave: 2020, DOOSAN PUMA 3100LY Krmiljenje FANUC LETO IZDELAVE: 2020.11 Velikost vpenjalne glave: 12 palcev Največji premer struženja: 420 mm Največja dolžina struženja: 1285 mm Premer obdelovanca (palica): 102 mm Pomik osi Z: 1350 mm Ijdpezc Nznsfx Ai Noti Pomik osi Y: 130 mm Pomik osi X: 293 mm Konjiček Podpora SMW AUTOBLOCK - Transporter za odvoz odrezkov s strojem - Dokumentacija

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 14.901 h, Funkcionalnost: popolnoma funkcionalen, DMG MORI / GILDEMEISTER CTX beta 1250 TC 4A Ijdpfx Aiozbg Txs Neti CNC Turning/Milling Center DMG CTX beta 1250 TC 4A, year of manufacture 2012. The machine is equipped with Siemens 840D / ShopTurn 3G control and features main and counter spindles, B-axis, Y-axis, upper milling spindle, as well as a lower turret. Current operating hours approx. 14,901 h, current spindle hours approx. 5,000. The machine is still connected to utilities and can be inspected by appointment. Condition: Exceptionally Good / Meticulously Maintained Technical Data Process: Turning / Milling / Complete Machining Machine type: CTX beta 1250 TC 4A Year of manufacture: 2012 Weight: approx. 16,000 kg Power: 85 kVA Control: Siemens 840D / ShopTurn 3G Main spindle / Counter spindle: each 1 x FNC 250, up to 5,000 rpm Main spindle: Hainbuch Spanntop nova Modular 80 Main spindle through bore: diameter 77 mm Counter spindle partial through bore: diameter 67 mm x 700 mm Coolant supply: 8 / 20 / 40 / 80 bar Short bar loader: IRCO ILS-RBK 100/16 Upper milling spindle: HSK-63A, 24-position disc magazine Travel of upper unit: B-axis +/-110 degrees, Y-axis +/-100 mm, X-axis 450 mm, Z-axis 1,200 mm Lower turret: VDI 40, 12 tool stations, X-axis 195 mm, Z-axis 1,200 mm Extra: Turret-mounted steady rest SMW SLU-X-2-ZS 8–101 mm Footprint: approx. 9,200 x 2,600 mm incl. exhaust filtration system, chip conveyor, and bar loader Video footage and a large photo collection available on request via WhatsApp.