Ernst Em 5 N/Ii/L + 2 B/1400 nakup rabljenega (126.817)

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Dcjdpfx Ast Hw Iijahjl Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Stroj je opremljen z opremo, prikazano na sliki. Djdpefa S E Iefx Aahjcl

Stanje: rabljeno, Leto izdelave: 2008, Working Width / mm Workpiece Height / mm Workpiece Thickness: 1-70 mm Minimum Workpiece Length: 350 mm Minimum Workpiece Length with Magnetic or Vacuum Conveyor: 80 mm Band Filter Unit Volume Ab=900 approx. 350 l Band Filter Unit Volume Ab=1400 approx. 400 l Constant Working Height 1000 mm Feed Speed 2/4 m/min Feed Speed, stepless adjustment: 1.5-8 m/min Operating Voltage 400 VAC Control Voltage 24 V DC, 230 VAC Frequency 50 Hz Compressed Air Connection R 3/8" Minimum Compressed Air Pressure 5 bar Minimum Compressed Air Volume EMSN II +2F 10 NI/min Minimum Compressed Air Volume EMSN II /L +2F 80 NI/min Total Electrical Connection See Layout Plan Machine Weight, Working Width 900 mm approx. 4200 kg Machine Weight, Working Width 1400 mm approx. 5100 kg Machine Weight, Working Width 1540 mm approx. 5600 kg Abrasive Belt Dimensions, Sanding Drum AB=900: 1540 mm length x 900 mm width Abrasive Belt Dimensions, Sanding Drum AB=1400: 1540 mm length x 1400 mm width Abrasive Belt Dimensions, Sanding Drum AB=1540: 1540 mm length x 1540 mm width 5. Technical Description The machine operates using a wet grinding process and may only be used with a suitable grinding emulsion. A band filter system is responsible for filtering grinding dust out of the emulsion. The machine is equipped with an elastic grinding drum, which is used for regrinding and burr removal. Two counter-rotating flap brush rollers or, alternatively, stainless steel brush rollers are then used for edge rounding. Two subsequent spring steel brushes are used to remove oxide layers from the cut surfaces. Within the machine, pressure rollers hold the workpieces down on the continuous conveyor belt to ensure they remain in position during the grinding process, which determines the minimum workpiece length of 350 mm. At the machine's outlet, there is an integrated drying unit that dries the workpieces before they exit the machine. The machine is fitted with a continuous conveyor belt for workpiece transport. Special configurations may include an integrated vacuum extraction unit or magnetic conveyor, making it possible to process smaller workpieces. For non-magnetic small parts, a minimum length of 80 mm with a minimum area of 200 cm², and for magnetic small parts, a minimum length of 80 mm with a minimum area of 40 cm² is required. All grinding and brush elements are equipped with spray tube nozzles, which continuously spray the tools with emulsion, enabling the processing of aluminum and its alloys. The grinding residue is carried by the emulsion to the band filter unit and captured by an appropriate filter fleece. ERNST Dcsdpfjinwwzex Aahel Automatic Sheet Metal Deburring Machine with Wet Grinding System Type EM 5 N/II/L + 2 F 1400 Year of Manufacture 2008 Factory No. 780063 Machine/Equipment: Sheet metal deburring machine with wet grinding system for stamped, laser-cut, and nibble parts of various materials, featuring a flexible sanding drum and two flap brushes for especially high edge rounding.

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), 2 x Müller Martini Warenkkeber 423 z Robatech Hotmelt Concept B 5/2, letnik 2006 za Müller Martini Tempo zbirni spenjač. Djdpfxexfwvqo Aahecl V dobrem stanju

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, CIP Installation Westfalia Separator AG CIP Installation Westfalia Separator AG | Tank, Pump, Heat Exchanger System Type: CIP (Cleaning In Place) Manufacturer: Westfalia Separatoren AG / GEA Group Complete CIP (Cleaning In Place) system from the renowned manufacturer Westfalia Separator AG, designed for automatic cleaning and disinfection of technological lines in the food and dairy industries. The system is equipped with stainless steel tanks with heating jackets, circulation pumps, GEA Ecoflex plate heat exchanger, and a control cabinet. Main components of the installation: 1. Stainless steel CIP tanks Brand: Westfalia Separator AG Type: CIP-TANK 3000 L (2 pcs.) Serial Numbers: 96/00408-1 and 96/00408-2 Year of manufacture: 1996 Capacity: (2×) 3300 liters Operating pressure: 0 bar Operating temperature: 80 °C Dimensions: (2×) 3000 × 1900 × 2300 mm 2. Stainless steel platform with stairs Dimensions: 2950 × 2200 × 2400 mm 3. Stairs Dimensions: 600 × 600 × 500 mm Dedpfx Aaextvb Uohjcl 4. Centrifugal pump Brand: Hilge Type: EURO-HYGIA-B-SUPER-II/60 B Number: 23/96/11349 Capacity: 30 m³/h Power: 11.0 kW Dimensions: 750 × 350 × 450 mm 5. Flow meter Brand: Endress + Hauser Model: Promag 53 Dimensions: 350 × 200 × 200 mm Accurate flow measurement for CIP media 6. Anema centrifugal pump Dimensions: 530 × 300 × 300 mm 7. Plate heat exchanger Brand: GEA Ecoflex GmbH Type: VT20 CDS Serial number: 170/13832 Dimensions: 900 × 550 × 1500 mm High heat exchange efficiency in CIP solution preparation process 8. Control cabinet Dimensions: 670 × 220 × 800 mm Responsible for operation control and system monitoring 9. Stainless steel buffer tank (CIP tank) Tank dimensions: Ø 800 × 800 mm Overall dimensions: 1150 × 900 × 1770 mm 10. Anema centrifugal pump, number: 32078 Operating pressure: 12 bar Dimensions: 650 × 400 × 450 mm The Westfalia Separatoren AG CIP installation is a complete solution for cleaning process systems, providing: - high process hygiene, - control of cleaning parameters (temperature, flow, time), - the possibility of integration with dairy, food, or beverage production lines. The use of components from brands such as GEA, Hilge, Endress + Hauser, and Anema ensures reliability and long service life of the system.

Leto izdelave: 2001, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Typ SUT 550 N-EM, STEUP SU 550 N mostna žaga / naprava za rezanje – 12,5 kW – 400 V – brez mize Naprodaj je robustna STEUP naprava za rezanje / žaga, model SU 550 N. Stroj je primeren za profesionalno uporabo pri obdelavi kamna, zlasti za rezanje naravnega kamna in podobnih materialov. Tehnični podatki glede na ploščico: - Proizvajalec: STEUP Maschinenbau GmbH - Model: SU 550 N - Moč: 12,5 kW - Napetost: 400 V - Frekvenca: 50 Hz Dsdjzuzq Depfx Aahjcl - Varovalka: 3 × 50 A - Nadzorna napetost: 24 V - Število vrtljajev: 1.400 vrt/min - Premer rezalne plošče: Ø 400–600 mm - Številka stroja: 965/00-05 (glede na ploščico) Stroj je masivno izdelana komercialna mostna žaga in je zato zanimiv za kamnoseške obrate, obdelavo naravnega kamna in komercialne delavnice. Pomembno: Žaga je na prodaj BREZ mize. Stroj se izrecno prodaja brez mize. Rabljen, z ustreznimi znaki uporabe. Tehnično stanje je treba preveriti ob ogledu na kraju samem. Prodaja po stanju, kot je prikazano na fotografiji. Če ste zainteresirani, se javite. Ogled je možen po predhodnem dogovoru.

Stanje: dober (rabljeno), Leto izdelave: 2017, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 4480, skupna dolžina: 14.500 mm, skupna širina: 7.800 mm, skupna višina: 3.500 mm, skupna masa: 20.000 kg, Reichenbacher Machining Center VISION III-TT-L – 5-axis, 3-axis, MBG8, 5x SNA Equipment: 5-axis unit with gimbal-mounted spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed programmable from 0 – 24,000 rpm, adjustable in 1 rpm increments Clockwise/counterclockwise rotation programmable Drive by frequency converter Maintenance-free Water-cooled Hybrid bearing Automatic spindle stop in emergency stop situation Orientated stop for tapping Tool holder: HSK-F63 hollow shaft taper as per DIN 69893-6 Max. usable tool length from spindle nose: 240 mm Max. usable tool weight: 6 kg 3-axis unit with vertically mounted spindle: Max. speed: 24,000 rpm Nominal speed: 10,000 rpm Power in S1*: 15 kW Max. power in S6: 20 kW Torque in S1*: 14.5 Nm Torque in S6: 19 Nm Nominal voltage: 380 V Nominal current: 37 A Nominal frequency: 380 Hz Speed programmable from 0 – 24,000 rpm, adjustable in 1 rpm increments Clockwise/counterclockwise rotation programmable Drive by frequency converter Maintenance-free Water-cooled Hybrid bearing Automatic spindle stop in emergency stop situation Orientated stop for tapping Tool holder: HSK-F63 hollow shaft taper as per DIN 69893-6 Max. usable tool length from spindle nose: 240 mm Max. usable tool weight: 6 kg 8-spindle drilling unit (1 pc): L-shape, Grotefeld Drilling spindles: individually selectable Rotation direction: clockwise/counterclockwise Hole pitch: 32 mm Power: 2.5 kW Speed: fixed at 5,000 rpm Z +75 Mount: D = 10 mm H7 Feed stroke: 80 mm Grooving unit (5 pcs): Dodpoywzq Sofx Aahjcl GROTEFELD angle saw unit F100-S Working/milling stroke pneumatically actuated. Drive: three-phase motor with Poly-V belt LEFT-hand design Drive rotation direction: clockwise/counterclockwise Speed ratio: 1:2.86 – belt drive Power: 2.20 kW – 220-240/380-415 V – 50 Hz Speed: n1 = 2,800 rpm n2 = 8,011 rpm at 50Hz Spindle power: 2.2 kW Feed rate: 150 mm Tool holder: ø30 x 1.5 mm – 5.0 mm Tool holder rotation: counter to drive rotation Feed force: 2,565 N Underfloor drilling unit in machine bed (1 pc): GROTEFELD angle milling head G06-1.1-P Working/drilling stroke pneumatic. Drive motor: 1.1 kW 220-240/380-415 V 50-100 Hz Drive rotation: right Speed ratio: 1:1.55 gear drive Drive speed: 2,800 – 5,600 rpm Tool spindle speed: 4,340 – 8,680 rpm Tool holder: 1x HI-Q/ERM25 DIN6499-C (8°) for collet chuck ER25 DIN 6499-B, ø0.5–16 mm max. Tool holder rotation: right Flange clamp: FK45 Feed slide: with pneumatic cylinder, dual steel shafts Feed: 80 mm

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, Ponujamo obnovljene turbine iz serije Rösler RRB 22/5-L. Tip turbine – Hurricane H42. Navedena cena je za 1 kos. Turbine so obnovljene z uporabo originalnih nadomestnih delov iz orodnega jekla. Peskalna naprava, brizgalna pištola, peskalno brizgalna naprava, peskanje, brizganje, metanje s turbino. Dcedpfoztp Aljx Aahol

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, Predelava po želji stranke! - Tmax 160°C - Dvižna vrata - Notranje dimenzije (D x Š x V): 3300 x 2500 x 1150 mm - Krmilnik JUMO IMAGO - Zračno upravljanje: 6 ventilatorjev, 6000 m³/h na ventilator - Lastna teža: 3000 kg - Priključna moč: 65 kW - Priključek: 400V 50Hz-3/N/PE 100A/faza Peč, peči, industrijska peč, predgrelna peč, sušilna peč, kalilna peč Dsdsxd A N Topfx Aahscl

Stanje: zelo dobro (rabljeno), Prodam motorno reduktor Mannesmann Demag AF06-L-M-0-145-1 s trifaznim motorjem Demag ZBA90 A4 B020. Naprava je v celoti delujoča, preizkušena in pripravljena za uporabo. Vizualno stanje je dobro, vidne so normalne sledi uporabe. Djdpfezpbufsx Aahocl Opombe: ena montažna ušesca je bila skrajšana – to ne vpliva na delovanje ali pravilno montažo motornega reduktorja, na plastičnem pokrovu motorja je majhna razpoka, ki ne vpliva na delovanje naprave. Tehnični podatki: Proizvajalec: Mannesmann Demag AG Model reduktorja: AF06-L-M-0-145-1 Model motorja: Demag ZBA90 A4 B020 Moč: 1,1 kW Napajanje: 3×400 V AC, 50 Hz Napetost zavore: 180 V DC Nazivni tok: 2,80 A Število vrtljajev motorja: 1400 vrt/min Izhodna hitrost: približno 23 vrt/min Prestavno razmerje: i = 60,1 Zavorni moment: 20 Nm Cos φ: 0,75 Stopnja zaščite: IP54 Razred izolacije: F Masa: 21,2 kg

Stanje: zelo dobro (rabljeno), Na prodaj vakuumska črpalka Rietschle CL 25 VE priznanega nemškega proizvajalca Rietschle. Naprava je namenjena ustvarjanju podtlaka v strojih, tehnoloških linijah ter sistemih sesalnih prijemal in sesalnih miz. Črpalka je opremljena s posodo za olje z indikatorjem nivoja in električnim pogonom. Robustna konstrukcija zagotavlja dolgo življenjsko dobo in zanesljivo delovanje. Vizualno stanje je skladno s fotografijami – normalne sledi uporabe. Tehnični podatki: Proizvajalec: Rietschle Model: CL 25 VE Serijska številka: 325202 Država proizvodnje: Zahodna Nemčija Pretok: 25 m³/h Število vrtljajev: 1400 vrt/min Maksimalni podtlak: ≥ 90 % Moč motorja: 1,1 kW (1,5 PS) Napetost: 380/220 V Frekvenca: 50 Hz Stopnja zaščite: IP44 Razred izolacije: B Uporaba Črpalka se uporablja, med drugim, v: CNC strojih, strojih za obdelavo lesa, pakirnih napravah, sesalnih mizah, vakuumske sesalne prijemalne glave, Dcsdezi Hf Aepfx Aahel sistemih za transport s podtlakom, laboratorijski opremi, tehnoloških instalacijah. Prednosti: robustna konstrukcija nemške proizvodnje, visoka zmogljivost 25 m³/h, trpežna rotacijska črpalka, ki se podmazuje z oljem, indikator nivoja olja, ki olajša nadzor delovanja, enostavna montaža in priključitev.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2022, obratovalne ure: 10 h, ABB IRB 1200-5 /0.9 +krmilnik +TPU DEMO ROBOT, stanje kot nov RAZVOJ PODJETJA GSG ROBOTICS Dcjdpozxbndefx Aahjl GSG Robotics GmbH, ustanovljeno leta 2005 v Güterslohu, ima sedež v Marlu od leta 2015 in ponuja obsežno servisno območje za vzdrževanje in popravilo robotov. Skozi leta smo se razvili v celovitega partnerja pri vseh vprašanjih, povezanih z industrijskimi roboti in tehnologijo avtomatizacije. Smo ponudnik celovitih storitev za dva znana proizvajalca robotov, ABB in Fanuc.

Stanje: rabljeno, Ponujamo rabljeni sistem za pripravo salamurnih mešanic proizvajalca Schröder Maschinenbau GmbH, zasnovan za pripravo salamur, ki se uporabljajo v mesnopredelovalni in živilski industriji. Sistem omogoča hitro in učinkovito mešanje salamur, vključno s tistimi z visokimi koncentracijami suhih snovi, kot so sol, fosfati, začimbe, tehnološki dodatki in funkcionalne sestavine. Sestavljen je iz dveh rezervoarjev — pripravljalnega in skladiščnega. Ta konfiguracija omogoča istočasno pripravo novega serija salamure ter shranjevanje končne mešanice za nadaljnjo obdelavo. Sistem je opremljen z dvema visokozmogljivima črpalkama, analognim upravljanjem priprave salamure in hladilnim sistemom, ki zagotavlja ustrezno temperaturo mešanice. Mešalne enote za salamuro Schröder omogočajo hitro pripravo homogene salamure, kar je ključno za nadaljnje faze proizvodnje, kot so injiciranje, masiranje, zorenje in mariniranje. Pravilno pripravljena salamura zagotavlja enotnost in ponovljivost proizvodnega procesa ter visoko kakovost končnega izdelka. Sistem je uporaben v mesnopredelovalnih obratih, perutninskih obratih ter obratih za proizvodnjo narezkov, šunk, suhomesnatih izdelkov, marinad in drugih proizvodov, ki zahtevajo pripravo salamure pred injiciranjem ali masiranjem. Schröder Maschinenbau GmbH – sistem za pripravo salamure z dvema rezervoarjema, ki vključuje: - pripravljalni rezervoar za salamuro - skladiščni rezervoar za končno salamuro - dve visokozmogljivi črpalki - sistem za mešanje in cirkulacijo salamure - analogna nadzorna plošča procesa - sistem za hlajenje salamure - cevovod ter procesni ventili - konstrukcija iz nerjavečega jekla - priključki za povezavo z nadaljnjim procesom Dedozhwkmepfx Aahecl Tehnične specifikacije: Proizvajalec: Schröder Maschinenbau GmbH Tip opreme: sistem za pripravo salamure Leto izdelave: 2001 Število rezervoarjev: 2 Tip rezervoarjev: pripravljalni in skladiščni Število črpalk: 2 Upravljanje: analogno Hladilni sistem: da Napajanje: 400 V Frekvenca: 50 Hz Moč: 4 kW Nazivni tok: 9 A Stisnjen zrak: 8 bar Dolžina: 2400 mm Širina: 1400 mm Višina: 2400 mm Ključne prednosti: - hitra priprava homogene salamure - možnost obdelave večjih količin suhih snovi - dva rezervoarja — pripravljalni in skladiščni - dve visokozmogljivi črpalki - sistem za hlajenje salamure - analogno upravljanje procesa - stabilna priprava salamure za injiciranje in masiranje - izboljšana ponovljivost proizvodnega procesa - pozitiven vpliv na kakovost končnega izdelka - konstrukcija iz nerjavečega jekla - proizvajalec z ugledom: Schröder Maschinenbau GmbH

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1989, številka stroja/vozila: WB-Res, DEMAG KBK mostni žerjav, nosilnost okoli 11 x 7 m – možnost podaljšanja! Nosilnost / obremenitev 1000 kg – 1 t Tehnični podatki sistema: Mostna železnica iz Demag KBK2 tirnic Sistem se dostavi v celoti: KBK tirnice, povezovalniki tirnic, podvozi, končne plošče, kabelski sistem, nosilci itd. vključno z napelavo za električno energijo v mostu! Dodozxa Rwepfx Aahscl vključno z Demag PK5 1000 kg verižnim dvigalom Žerjav je razstavljen in takoj na voljo Na voljo je več mostov, dolžina od 5 do 8 m. Zaželene mere (dolžina in širina) lahko povprašate! Na voljo so različne nosilnosti: 500, 700, 800, 1000 kg Odlično stanje, glejte slike Lokacija artikla je 75053 Gondelsheim Pošiljanje prek špediterja ali osebni prevzem le po predhodnem dogovoru Demag KBK1, KBK2 in KBK3 tirnice so stalno na zalogi! Na voljo so tudi drugi KBK sistemi. Nosilnost 125 kg – 1600 kg. Prosimo, da povprašate za svojo mostno železnico z nosilnostjo in dimenzijami.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2004, številka stroja/vozila: WILres, DEMAG KBK stropno dvigalo Kranova proga približno 13x7 m Nosilnost / dvižna teža 500 KG - 0,5 t Tehnični podatki naprave: Kranova proga iz Demag KBK2 tirnic Naprava se dobavi kompletna: KBK tirnice, povezovalni elementi, vozički, zaključne plošče, kabelska vleka, nosilci/obešala itd. Vklj. starejša Demag PK2 500KG verižna dvigalka (na sliki je prikazana Demag DK2) Kran je demontiran in takoj na voljo Rabljeno stanje, glej slike Lokacija artikla je 75053 Gondelsheim Dostava preko špediterja ali osebni prevzem samo po dogovoru Demag KBK1, KBK2 in KBK3 tirnice so na zalogi! Dcedpfx Aajy Hpbdehsl Na voljo so tudi druge KBK naprave. Nosilnost 125KG - 1600KG Prosimo, povprašajte za vašo kranovo progo z razponom in dimenzijami.

Stanje: dober (rabljeno), Leto izdelave: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Model: EM 75-120 Unilog B4 All-electric Year of manufacture: 2005 Clamping Unit Clamping force: 75 tons Opening stroke: 800 mm Tie bar spacing (h x v): 405 x 405 mm Min. mold height: 150 mm Max. mold height: 480 mm Injection Unit Screw diameter: 18 mm Shot volume: 30 cm³ Shot weight PS: 27 g Injection pressure: 2440 bar Dimensions and Weight Overall dimensions (LxWxH): 4.5 x 1.7 x 2.0 m Machine weight: 4,500 kg Additional Information: BATTENFELD EM 75/120 UNILOG B4 All-electric precision injection moulding machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality all-electric injection moulding machine manufactured in Austria. The EM series by BATTENFELD was already among the most advanced servo-electric machine concepts in its class at the time, specifically developed for energy-efficient and highly precise production processes. All main movements of the machine are driven by state-of-the-art servo motors. As a result, the machine offers: * very low energy consumption * high repeatability * smooth and quiet operation * low maintenance costs * stable and precise production processes The machine is particularly suitable for: * technical plastic parts * electronic components Dsdpfxjwl Rucs Aahjcl * precision parts * small and medium series production Thanks to the all-electric technology, substantially improved energy efficiency and process stability are achieved compared to conventional hydraulic machines. Equipped with the proven BATTENFELD UNILOG B4 control system, the machine provides: * user-friendly operation * precise process control * stable cycle times * reliable servo axis control The machine has approximately 69,094 operating hours and is in well-maintained optical and technical condition. Notable features include: * a clean control cabinet * well-maintained mechanical components * well-preserved servo units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic production.

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, skupna masa: 6 kg, Naprodaj je modul Siemens SINAMICS S120 za dva motorja, številka izdelka: 6SL3120-2TE15-0AD0. Serija: SINAMICS S120 Izvedba: Modul za dva motorja Vhod: DC 600 V (nominalna vrednost; medsebojni tok DC 510–720 V) Izhod: 3 AC 400 V Nominalni izhodni tok: 2 x 5 A Izvedba: Booksize D-Type Hlajenje: Notranje zračno hlajenje Stopnja zaščite: IP20 / UL, odprta izvedba Izdelek izvira iz skladišča/skladišča rezervnih delov. Vizualno stanje je razvidno iz priloženih slik. Dcedpfx Aszxnfpsahsl Po želji vam na zahtevo z veseljem ponudimo dodatno tehnično dokumentacijo ali podrobnejše slike. Ogled in prevzem sta možna po predhodnem dogovoru. Pošiljka je možna ob dodatnih stroških. Pridržujemo si pravico do sprememb, napak in vmesne prodaje.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, Širina pločevine: 2050 mm Debelina pločevine: 4 mm Hod: 41 mm/min Višina mize: 850 mm Teža stroja cca: 2.900 kg Dedpfxszbarno Aahocl Dimenzije: 2700 x 2200 x 1400 mm

Stanje: zelo dobro (rabljeno), DOUBLE-SIDED EDGE BANDING MACHINE Edge thickness in rolls (min/max) mm 0.3 / 3 Edge thickness in strips (min/max) mm 0.8 / 12 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 274 / 3300 Control system: ICOS OPEN Feed speed m/min (adjustable) 6 - 30 Dedpfx Aed Rcigjahjcl No transmission bar (Master & Slave systems) Top pressure driven by V-belt Sprayer unit (for liquid anti-stick agent) Jointing milling unit 08.376 (4.5 kW x2) Free position Glue application unit (hot melt glue) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 2 End trimming unit 08.42 (0.66 kW x 2) 0°-25° Milling unit 08.055 (1 kW x 2) 0°-30° Multifunctional unit (radius and profile milling unit) 08.342 (0.66 kW x 2) Profile scraper unit 08.519 Flat scraper unit 08.50 Sprayer unit (for polishing fluid) Buffing unit 08.612 Free position (for grooving/rabbetting unit)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, številka stroja/vozila: TD2002/0297, 1 Demag KBK II stenski vrtljivi žerjav, nosilnost 250 kg / dvigalna nosilnost Doseg: 5 m, nosilnost 250 kg Dcedpfxezv H T Tj Aahel z Demag DC verižnim dvigalom, nosilnost 250 kg Teža, vključno s stensko konzolo: približno 300 kg Komplet, vključno z verižnim dvigalom, kabelskim vodilom, podvozkjem in manjšim materialom Območje vrtenja: 270° Lokacija izdelka: 75053 Gondelsheim Naprava je popolnoma razstavljena in takoj na voljo Pošiljanje s špediterjem ali osebni prevzem Prosimo, za stroške pošiljanja vprašajte glede na poštno številko.

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, dovoljena osna obremenitev (os 1): 9.000 kg, dovoljena osna obremenitev (os 2): 9.000 kg, dovoljena osna obremenitev (os 3): 9.000 kg, prva registracija: 05/2017, skupna dolžina: 12.890 mm, skupna širina: 2.480 mm, skupna višina: 1.350 mm, vzmetenje: zrak, velikost pnevmatike: 385/55R22.5, medosna razdalja: 10.540 mm, Leto izdelave: 2017, Konfiguracija osi Znamka osi: SAF Zavore: bobnaste zavore Vzmetenje: zračno vzmetenje Zadnja os 1: dimenzija pnevmatike: 385/55R22.5; dvižna os; maks. obremenitev osi: 9000 kg; krmilna Zadnja os 2: dimenzija pnevmatike: 385/55R22.5; dvižna os; maks. obremenitev osi: 9000 kg; krmilna Dodpfxjznl Iaj Aahjcl Zadnja os 3: dimenzija pnevmatike: 385/65R22.5; dvižna os; maks. obremenitev osi: 9000 kg Zadnja os 4: dimenzija pnevmatike: 385/65R22.5; maks. obremenitev osi: 9000 kg Zadnja os 5: dimenzija pnevmatike: 385/65R22.5; dvižna os; maks. obremenitev osi: 9000 kg; krmilna Teže Lastna teža: 9.250 kg Nosilnost: 53.750 kg Maksimalna dovoljena masa (zGG): 63.000 kg Vzdrževanje, zgodovina in stanje Tehnični pregled (APK): veljaven do 06.2027 Tehnično stanje: dobro Vizualno stanje: dobro Finančne informacije Cena: na zahtevo Identifikacija Registrska tablica: OP-94-TV Dodatne informacije Za dodatne informacije se obrnite na Arieja. = Dodatne možnosti in dodatna oprema = - Elektronski zavorni sistem (EBS) - Dvižna os - Zračno vzmetenje - Zaklepni sistem za kontejnerje (twist-locks)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, številka stroja/vozila: FI126/4 / FI128/5, 1 Demag KBK II stenski vrtljivi žerjav, nosilnost / dvižna zmogljivost 250 KG Na voljo 2 kosa!!! Izmet 4 m, nosilnost 250 kg Z verižno dvigalko Demag PK, nosilnost 250KG (starejši model) Teža z vključno stensko konzolo cca 200 kg Kompletno z dvižnim mehanizmom, kabelskim vodilom, vozičkom in drobnim materialom Območje vrtenja 270° Dsdpfoyl Syfjx Aahocl Lokacija artikla: 75053 Gondelsheim Naprava je popolnoma razstavljena in takoj na voljo Pošiljanje s špediterjem ali osebni prevzem Prosimo, povprašajte za stroške pošiljanja glede na poštno številko

Leto izdelave: 2006, stanje: dober (rabljeno), številka stroja/vozila: WIZ, DEMAG KBK Crane Runway System - Dimensions approx. 15x4 m Dcsdoiwdaqjpfx Aahol Steel Structure (Space Requirement): 13.2 x 5.5 m Load Capacity / Lifting Capacity: 500 kg - 0.5 t Technical Data of the System: Crane runway made of Demag KBK2 rails External dimensions of steel structure (space requirement): 13.2 x 5.5 m Height of steel structure: 4.85 m, underside of steel structure: 4.65 m Underside of runway: 4.4 m, underside of bridge: 4 m, hook height: 3.8 m Support spacing: 4 + 4 + 4.9 m System is delivered complete: KBK rails, rail connectors Trolleys, end plates, cable trolley system, brackets/suspenders, etc. + complete steel structure (HEA180) Incl. Demag DC 500 kg chain hoist Crane is dismantled and available immediately Item location: 75053 Gondelsheim Good condition, see pictures (contaminated by oil mist – can be easily cleaned) Shipping by freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails in stock!

Stanje: rabljeno, Leto izdelave: 2011, vrsta goriva: dizel, Dvižna zmogljivost: 1.000 kg Za več informacij se obrnite na center za rabljeno opremo. Djdpjzi Ngcjfx Aahecl

Stanje: rabljeno, Leto izdelave: 2023, For inquiries regarding the attachment, Mr. Herden will assist you (via phone). Seppi M. MINI-BMS 105 / 5-10t / Forestry Mulcher / CUT CONTROL / DEMO unit / Year of manufacture: 2023 / in stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - Suitable for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm Ø - For excavators from 5-10 tonnes - Can be mounted with various attachment plates - Drive designed for hydraulic motor, depending on carrier’s output - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front protection with chains - Rear protection with chains - Adjustable skid runners, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - approx. 200 mm high Optional: MS08 adapter plate including bolts and installation = €1,410.00 net We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available immediately. For operation, an autonomous hydraulic system is recommended. Three hydraulic lines are required: feed, return, and drain. Additionally, a double-acting hydraulic connection is necessary for the hydraulic hood. The unit is supplied without hoses, fittings, and mounting plate. Financing options available upon request. We are official sales and service partners of Westtech, Gierking GMT, OilQuick, Weber MT, Holp, DMS, Seppi M., Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. Furthermore, with 800 used vehicles, we are one of Germany’s largest commercial vehicle dealers. Dcodpfx Aaeyltv Uohel We supply the complete Seppi M. range! Subject to errors and prior sale! Internal No.: 170048 Please contact Marius Herden for further information.