Faymonville Multimax Satteltieflader (1+3) - Hydr. Gelenkt nakup rabljenega (105.611)

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) Nwjdpfx Anetx Nwnezjk * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: novo, skupna masa: 80.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Further vehicles available – excerpt from the equipment list. Full equipment details on request. GOOSENECK: * Gooseneck in SNT design for optimized loading bed length, length approx. 3,700 mm, rear with chamfer approx. 1,000 mm x 10° * For tractor units: 4x2, 6x2, and 6x4 * Front steel bulkhead, plug-in, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for controlling hydraulic functions (excluding hydraulic winches) * Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair horizontal lashing rings at the rear section of the gooseneck (LC 10,000 daN) * On the gooseneck: 1 pair removable ALU side boards approx. 400 mm high, anodized finish * On the gooseneck: 1 removable ALU rear board approx. 400 mm high, anodized finish * Over the gooseneck: approx. 40 mm hardwood flooring, over the king pin checker plate covering * 3.5-inch king pin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 2 pairs of suspended lashing rings with retaining spring on the outer beams of the gooseneck (LC 5,000 daN) Nwedpfxexarmas Anzsk LOADING BED: * Loading bed, extendable version, length approx. 8,800 mm with chamfer at the rear approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced locking positions, supply lines are protected within the extendable beams and automatically adapt to the respective bed length * BPW axles and suspension, first axle hydraulically steered, all other axles hydro-mechanically forced steered * First axle with electro-magnetic reverse lock, activated by reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * 235/75 R 17.5 3PMSF twin tyres – manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Modul B – static test load = 50,000 kg * Continuous hardwood flooring (approx. 50 mm thick) on the bed and between axles (interrupted), increasing friction coefficient. – Slots for attachable and adjustable bridging elements * At the front of the bed – 1 movable intermediate table approx. 300 mm wide for the large-section telescopic tube, with checker plate covering. – Front and rear slots for attachable and adjustable bridging elements * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 7 pairs of recessed folding lashing rings on the outer frame of the bed (LC 10,000 daN) * Extensions (galvanized), extendable by approx. 230 mm per side (without wooden planks) * 1 pair mechanical rear supports * Remote-controlled steering from front and rear via cable remote control, with single-track control of axles, without installation in the tractor unit * TPMS tire pressure monitoring sensors installed in all wheels * Locking of the bed with conically welded retaining profiles every 500 mm * Locking control left and right on the trailer * For the intermediate table approx. 300 mm wide, a mechanical lock for securing the table in the extension * 5 pairs of threaded blocks on the extendable beam for mounting M20 screw rings (LC 5,000 daN) BRAKING SYSTEM

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) Nodpjrgzv Nefx Anzswk * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: Nsdpfx Ansy Auh Iezswk * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: rabljeno, največja dovoljena obremenitev: 31.100 kg, skupna masa: 42.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2013, Leto izdelave: 2013, Oprema: ABS, * Faymonville F-S43-1ABA nizkopodvozna prikolica * Datum prve registracije: 03-2013 * hidravlično dvigovanje * hidravlično pomična dvojna zložljiva stranska ograja * vključno z vrvnim vitlom z radijskim upravljanjem * 3. os s krmiljenjem * osi SAF * zračna vzmet * bobnasta zavora * največja dovoljena masa: 10.900 kg * največja tehnično dovoljena masa: 31.100 kg Nwodpfx Ajzq N N Hsnzsk * največja dovoljena skupna masa: 42.000 kg * pnevmatike 235 / 75 R 17,5 * več slik in videoposnetkov pošljemo prek aplikacije WhatsApp * Podatki so zgolj informativni in ne zavezujejo, pridržana pravica do spremembe.

Stanje: rabljeno, Leto izdelave: 2014, Contact Theo Lelie for further information. Nwodpextqkwefx Anzek

Stanje: novo, največja dovoljena obremenitev: 38.953 kg, skupna masa: 49.500 kg, konfiguracija osi: 3 osi, Leto izdelave: 2026, MAX100-N-3B-9.30-U Technical Data Speed: 80 km/h Gross Vehicle Weight: 49,500 kg King Pin Load: 18,000 kg Axle Load: 31,500 kg Unladen Weight (+/- 3%): 10,547 kg Payload approx.: 38,953 kg Gooseneck Length: 3,850 mm Nwjdjg Sk Tropfx Anzsk Fifth Wheel Height (laden): 1,200 mm Loading Platform Length: 9,300 mm Extendable by: 0 mm Axle Spacing: 1,360 mm Rear Overhang Radius: 2,300 mm Loading Height at Max. Load: 860 mm Overall Width: 2,540 mm Suspension Travel: -55 / +145 mm Technical Description Gooseneck: Gooseneck with chamfered front corners 45° and rear chamfer approx. 750 mm x 10°. 3 pairs of lashing rings (LC 5,000 daN). Hardwood decking, 30 mm thick. Loading Platform: Hydraulically liftable and lowerable loading platform behind gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8°. 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN). 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN). Cutouts in the side frame of the loading platform for hooking in tension belts (LC 2,000 daN). Hardwood decking approx. 48 mm thick, chequered plate lining over the axles. Ramps: Two-piece steel ramps: One pair, galvanized, approx. 2,750 + 1,400 x 800 mm with hardwood decking approx. 48 mm thick. Ramps with hydraulically foldable ramp sections, hydraulic lifting unit, and hydraulically adjustable. Maximum load per pair: 40,000 kg Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for 24 t lift capacity (50 t test load). Tyres: 235/75 R 17.5 tyres as per manufacturer's choice. Axles: SAF axles, air-suspended, with drum brakes, with lifting/lowering function. The rear axle is self-steering with electro-magnetic reverse lock, activated via reverse gear or manually. Axle tools included. Brake System: Brake system in accordance with EU regulations, EBS-E (2S2M) without connecting lines to the tractor unit. Steel Structure: Steel frame constructed from high-tensile fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: Excellent and durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust priming coat. High-quality 2-component (2K) top coat, single colour, in RAL shades of your choice. Rear section metallized and painted in RAL 9010 (Pure White). No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting LED 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connector bar with 24N, 24S & 15-pin sockets. Connection as per ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Included Accessories 2" king pin One galvanized steel front wall, approx. 400 mm high. Yellow-red air couplings on the galvanized connector bar at the front. 4 wheel chocks with holder on the front wall. (± 5 kg) Cable for supplying the electro-hydraulic unit and/or electric winch (35mm², 3.5 m long, max. 250A) between trailer and tractor unit with connector (ANDERSON-ANDERSON) Galvanized folding support legs under the loading platform chamfer. One bracket for rotating beacon on the rear of the trailer. Control valves for the ramps mounted on the right side of the trailer. (± 4 kg) Yellow reflective tape as per EU regulations on the sides and rear of the trailer. Electro-hydraulic unit under the rear loading platform. (± 45 kg) On the gooseneck and on the ramps left...

Stanje: rabljeno, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, prva registracija: 09/2017, * SAF osi * Kolesni izrezi * Hidravlične nakladalne rampe, nastavljive po širini * Zračno vzmetenje * Možnost razširitve * Lastna teža: 11.020 kg ----Interna številka vozila: 11010----Napake in vmesna prodaja pridržane. WhatsApp podpora na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite udobno preko WhatsAppa Nodpfxewta Alj Anzjwk WhatsApp nemško, angleško -- WhatsApp nemško, angleško, arabsko

Stanje: dober (rabljeno), konfiguracija osi: 3 osi, prva registracija: 12/2007, vzmetenje: zrak, Leto izdelave: 2007, Oprema: ABS, = Dodatne možnosti in dodatna oprema = - EBS - Dvigalna os - Zračna vzmetitev = Dodatne informacije = Vzmetenje: zračna vzmetitev Zadnja os 1: krmiljena Zadnja os 2: krmiljena Zadnja os 3: krmiljena Lastna teža: 12.940 kg Nosilnost: 21.060 kg Dovoljena skupna masa: 34.000 kg Tehnično stanje: dobro Vizualno stanje: dobro Številka vozila: Nizkotlačna prikolica: 15 Faymonville / 3 x krmiljene osi z daljinskim upravljanjem SAF / podaljšljiva .: YA9TL35F02113453 SAF 3 x krmiljene osi z daljinskim upravljanjem Lastna teža: 12490 Skupna teža: 34000 Dolžina: 9,20 m s podaljškom 15,10 m + podaljšek 20,40 m, skupna dolžina 24,40 m Širina: m = Informacije o podjetju = Ne odgovarjamo za tiskarske in prepisne napake, spremembe, posredni prodaji in napake. Pridržana pravica! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobilni telefon: gospa Sabine Faust E-pošta. Nedpezvzt Ijfx Anzowk

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Celotno zalogo vozil, ki so na voljo takoj in v kratkem roku, najdete na naši spletni strani - ge.de. Izvleček iz opreme. Celotna oprema na zahtevo. GOSJA VRAT: * Gosja vrat v SNT dizajnu za optimizacijo dolžine tovornega prostora, dolžina približno 3.700 mm, zadnji del s poševnostjo približno 1.000 mm x 6° * Za SZM (prikolico z menjalnikom): 4 x 2 in 6 x 2 * ASPÖCK-UNIBOX * Na gosji vrati in zadnji poševnosti rešetkasta površina z 5 mm jekleno ojačitvijo * 2-palčna kraljevska vlečna glava * Vodilna plošča na gosji vrati za priklopno ploščo, približno 500 mm široka * Okrogla vtičnica NATO na priključni letev spredaj (Maeler & Kaege VG 96 917) Nwodpfsy Auhhsx Anzjk * Na gosji vrati 1 par vstavljivih aluminijastih stranskih platen, približno 400 mm visoke, v anodizirani izvedbi * 1 LED delovna luč, nameščena na levi in desni strani sprednje stene na vrhu, upravljanje preko vklopno/izklopnega stikala (upravljanje delovnih luči iz SZM v tem primeru ni mogoče) TOVORNI PROSTOR: * Tovorni prostor, dolžina približno 9.600 mm, z poševnostjo na zadnji strani približno 900 mm x 6° * Tovorni prostor za gosjo vratjo je hidravlično dvigljiv in spuščljiv, dolžina približno 3.000 mm, nosilnost do približno 9.000 kg * Na dvižni platformi in tovarnem prostoru neprekinjena rešetkasta površina z približno 5 mm jekleno podlago kot dodatna ojačitev, zasnovana za točkovno obremenitev PNEVMATIKE: 235/75 R 17.5 3PMSF, dvojne pnevmatike. Proizvajalec po naši izbiri * Sistem za nadzor tlaka v pnevmatikah (TPMS) v skladu z ECE R 141 OSI: * BPW osi in vzmetenje, 1. in 2. os fiksni, 3. os z zadnjim krmiljenjem * 3. os z elektromagnetno blokado za vzvratno vožnjo, ki se aktivira preko vzvratne prestave in ročno * 1. os z asistenco pri speljevanju * Tehnična obremenitev osi: 12.000 kg na os * Zračno vzmetenje z ventilom za dvig in spuščanje HIDRAVLIČNE RAMPE: * 1 par dvodelnih jeklenih ramp AXS z rešetkasto površino, dolžina približno 4.920 mm in širina približno 900 mm * Hidravlično odpirajoče se konice ramp * Rampe je mogoče posamično hidravlično premikati približno 235 mm navzven in približno 365 mm navznoter * Luči na zunanji strani konic ramp, stikalo poleg upravljanja ramp * Varnostno zaklepanje ramp v vožnji s hitro zaporo * Premazana peskana površina na zunanjem okvirju rampe in na konici rampe * Mehanske opore v obliki padajoče cevi, nameščene ob straneh ramp za podporo pri priključitvi na nakladalne rampe * Upravljalni ventili za hidravlične rampe na desni strani vozila ZAVORNI SISTEM: Zavorni sistem proizvajalca WABCO EBS-E v skladu z uredbami EU OBLIKOVANJE POVRŠINE: * HRM-metalizacija celotnega šasije vozila z ZINACOR 850 (85 % cink/15 % aluminij) za zagotavljanje najboljše zaščite pred korozijo LAKIRANJE: * Prikolica karminsko rdeča (RAL 3002) * Platišča srebrno siva * Stranske platne aluminijaste naravne barve * Pestne osi po proizvajalcu osi * Tabela z lučmi čisto bela (RAL 9010) OPREMA: * Sprednja stena iz jekla, vstavljiva, približno 1.600 mm visoka, vključno s priključno letev za oskrbovalne vodnike za SZM, nameščena približno 1.000 mm od spodnjega roba zunanjega okvirja * Možnost pritrditve pritrdilnih verig na notranji strani sprednje stene, levo in desno, vključno z aluminijasto kadjo pod njimi, na levi in desni strani za shranjevanje verig ali vrvnih zateg * Za sprednjo steno je privijana plošča DELIGNIT debeline približno 12 mm * 2 para privijačnih pritrdilnih obročev dodatno (LC 5.000 daN) * Električni vitel, vlečna sila približno 5.400 kg, z brezžičnim d

Stanje: rabljeno, največja dovoljena obremenitev: 35.600 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izvleček – oprema: Gooseneck prikolica: Gooseneck prikolica v izvedbi SNT za optimizacijo dolžine tovornega prostora, dolžina približno 3.700 mm. Gooseneck prikolica na zadnji strani s poševnim robom približno 1.000 mm x 6°. Težavna obremenitev sedla: 18.000 kg Za SZM (posebno vozilo za prevoz): 4 x 2 in 6 x 2 Tovorni prostor: Raztegljiv tovorni prostor, dolžina približno 9.600 mm, s poševnim robom na zadnji strani približno 900 mm x 6°. Tovorni prostor za gooseneck prikolico je hidravlično dvigljiv in spuščljiv, dolžina približno 3.000 mm. Nosilnost do približno 9.000 kg Rampe: DR-10-900-4920-GR-HV-AXS Par dvodelnih jeklenih ramp AXS s dolžino približno 4.920 mm in širino približno 900 mm. Odprta rešetkasta površina. Hidravlično zložljivi končni deli ramp. Rampe je mogoče posamično hidravlično premikati približno 235 mm navzven in približno 365 mm navznoter. Maksimalna obremenitev in naklon glede na tehnično specifikacijo: C470319 Maksimalni naklon pri spuščenem tovornem prostoru: približno 9° Osi in vzmetenje: Osi in vzmetenje BPW, 1. in 2. os fiksna, 3. os s sistemom sledenja. Težavna obremenitev osi: 12.000 kg Elektro-magnetna blokada za vzvratno vožnjo, aktivira se prek vzvratne prestave in ročno. Zračno vzmetenje z ventilom za dvig in spuščanje. Komplet orodij za osi. Zavorna naprava: Zavorna naprava blagovne znamke WABCO EBS-E v skladu z direktivami EU. Brez povezovalnega kabla za vlečno enoto. Pnevmatike: 235/75 R 17.5 3PMSF, dvojne pnevmatike. Proizvajalec po naši izbiri. Indeks nosilnosti 143/141J (144/144F) Barvanje: 6-plastna končna obdelava: Celotna jeklena konstrukcija po varjenju peskana. 1 plast osnovne barve na podlagi cinka, 1 plast prajmerja. Končna barva z 2 plastmi 2-komponentne barve (akril), enobarvna v barvi RAL 3002 karmin rdeča, nato zapiranje votlin s posebnim voskom. Platišča v srebrni barvi. Večbarvno in posebno barvanje proti doplačilu. Dodatna oprema (vključno): - ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S in 15-polna. - 24N priključek v skladu s standardom ISO-1185 - 24S priključek v skladu s standardom ISO-3731 - 15-polni priključek v skladu s standardom ISO-12098 - 3 kW elektro-hidravlična enota za upravljanje hidravličnih funkcij, razen hidravličnih vitlov. - Parkirni položaj na gooseneck prikolici za opozorilne table, ko niso v uporabi. - Zunanji nosilec na gooseneck prikolici z luknjami za pritrditev vijakov za pritrdilne obroče. - Prva luknja je približno 200 mm od sprednjega roba, nato približno vsakih 400 mm. - Ena luknja za pritrditev na zadnji zgornji strani zunanjega nosilca gooseneck prikolice za vijak za pritrdilni obroč. - 1 par vijakov za pritrdilne obroče (LC 10.000 daN). - 3 pari vgrajenih pritrdilnih obročev v notranjosti zunanjega nosilca gooseneck prikolice (LC 5.000 daN). Nedpfx Aezkx Hbonzowk - 3 pari vgrajenih pritrdilnih obročev na sredini gooseneck prikolice (LC 5.000 daN). - 1 par vgrajenih pritrdilnih obročev na zadnji strani na sredini gooseneck prikolice (LC 5.000 daN). - Na gooseneck prikolici in poševnem robu rešetkasta površina s približno 5 mm jeklene pločevine za dodatno okrepitev. - 2 palčni kraljevi zatič. - Vodilna plošča na gooseneck prikolici za sedežno ploščo, široka približno 500 mm. - Mehanske podpore sedla z 2-stopenjsko prestavo in ročico. - JOST Modul B - statična preizkusna obremenitev = 50.000 kg - Neprekinjena rešetkasta površina z 5 mm podlago iz jeklene pločevine kot dodatna okrepitev, zasnovana za točkovno obremenitev: - Zaklepanje tovornega prosto

Stanje: novo, največja dovoljena obremenitev: 36.500 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle stock, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. * Gooseneck, approx. 4,100 mm long with central beam * Platform deck, extendable twice, approx. 9,400 mm in length * BPW axles and suspension * All axles hydro-mechanically forced steered * Technical axle load: 12,000 kg * Air suspension with lifting and lowering valve * Tires: 235/75 R 17.5 3PMSF dual mounted * WABCO brake system, EBS-E * 3 kW electro-hydraulic power unit for hydraulic operations, without installation of supply connections at the tractor unit * 4 pairs of stake pockets recessed into the outer frame of the gooseneck, for insertable stakes approx. 100 x 50 mm * 2-inch king pin * 8 pairs of stake pockets recessed into the outer frame of the platform deck, for insertable stakes approx. 100 x 50 mm * 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the deck on the left in the direction of travel Nwedpfx Anjwvzg Rjzjk * Remote steering from the front and rear via cable remote control with push buttons; with single-track axle monitoring; no installation in the tractor unit * 2 axle load gauges mounted on the left side * Steel front wall, approx. 1,600 mm high * 3 transverse stake pocket strips in the platform deck, for insertable stakes approx. 100 x 50 mm * 1 transverse stake pocket strip in the gooseneck deck, for insertable stakes approx. 100 x 50 mm * 1 additional lockable INOX toolbox under the platform deck * WADER container pockets in the platform deck for transporting: 2x 20' containers or 1x 40' container * Central lubrication system with 2 pumps, brand BEKAMAX * Complete HRM metallization (High Resistance Metallisation)

Stanje: novo, največja dovoljena obremenitev: 48.300 kg, skupna masa: 71.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately and at short notice, can be found on our website. Below is an excerpt from the equipment list. Full specification available upon request. GOOSENECK: * Gooseneck with integrated single-axle running gear (pendulum axle) in a detachable version * Gooseneck hydraulically liftable and lowerable, including hydraulic connection linked to the hydraulic axle compensation of the first axles * Length: approx. 5,200 mm, with front tapering approx. 60° * Fifth wheel load according to data sheet: W25-DSR2700-12/22.7 * For tractor units: 6 x 4 or 8 x 4 * Steel front wall, plug-in type, approx. 400 mm high, with beveled design * 1 pair of mechanical supports at the front of the gooseneck * ASPÖCK-UNIBOX on the front connector panel with 24N, 24S & 15-pin sockets Njdpfxjyhkqne Anzjwk * 1 spare wheel holder inside the front wall of the gooseneck with jib * 2 pairs of recessed lashing rings on the gooseneck (LC 2,500 daN) * 2 pairs of recessed lashing rings on the outer frame of the running gear at the front, foldable outward (LC 10,000 daN) * 1 pair of lashing rings at the transition from running gear to loading platform (LC 10,600 daN) * On the gooseneck 1 pair of removable aluminum drop sides, approx. 400 mm high, anodized * On the gooseneck 1 removable aluminum rear wall, approx. 400 mm high, anodized * 3.5 inch kingpin * TPMS tire pressure monitoring system according to ECE R 141 * Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) * 1 stainless steel toolbox with 1 lid, mounted on the gooseneck on the right in the direction of travel by the aluminum drop side, approx. 1,350 x 400 x 400 mm (L x W x H) LOADING PLATFORM: * Low-bed with external beams, designed as a telescopic loading platform in low-profile design with front extension including fixed approx. 50 mm thick hardwood floor * Length x width approx. 8,000 mm x 2,740 mm * Mechanical bolt-lug coupling from low-bed to running gear for swapping the loading platform or installing extension beams * One locking position approx. every 500 mm on the extension * 4 pairs of recessed lashing rings fitted flat in the loading platform along the outer frame/external beams (LC 10,000 daN) * 1 lashing ring each on the left and right outer rear cross member (LC 10,000 daN) * Foldable extensions, approx. 230 mm per side (WITHOUT wooden boards) * Loose extension planks, steel-rimmed * Preparation for installation of bolted container positions for 1x 20’ or 1x 40’ container on the outer beams. Without container locks * 6 pairs of threaded blocks between the lashing rings under the top chord of the outer beam for mounting bolted M24 rings (LC 8,000 daN) * 2 pairs M24 bolt rings (LC 8,000 daN) included REAR RUNNING GEAR: * Rear running gear with closed outer frame, checker plate decking and continuous prism-shaped excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and foreplugs to secure in raised position * Final paint of axles in 2 layers of 2-component paint, single color, DB 7350 Novagrau * Technical axle load: 12,000 kg each * Hydraulic axle compensation * 245/70 R 17.5 3PMSF, brand at our choice * Remote steering from front and rear via cable control, with axle alignment check, no installation in the tractor unit * 4 pairs of hanging la

Stanje: novo, največja dovoljena obremenitev: 36.400 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment. Full specification available upon request. - Gooseneck in SNT design to optimize the platform length, approx. 3,700 mm long, rear with a chamfer of approx. 1,000 mm x 6° - For tractor units: 4 x 2 and 6 x 2 - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S, & 15-pin sockets - 3 kW electro-hydraulic power pack to control hydraulic functions, except for hydraulic winches. Without installation of supply connections on the tractor unit - Outer beams of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - One mounting hole at the rear upper section of the outer beams of the gooseneck for a bolted lashing ring - 1 pair of screw-in lashing rings included (LC 10,000 daN) - 3 pairs of recessed lashing rings inside the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of recessed lashing rings in the center of the gooseneck (LC 5,000 daN) - 1 pair of recessed lashing rings at the rear center of the gooseneck (LC 5,000 daN) - The gooseneck and rear chamfer feature grating flooring with 5 mm steel reinforcement - 2-inch king pin - Round NATO socket at the front connection panel (Maeler & Kaege VG 96 917) - Spiral cable to supply the electro-hydraulic power pack and/or the electric winch (approx. 35 mm², approx. 3.5 m long) between trailer and tractor unit with plug (NATO-NATO) - On the gooseneck: 1 pair of detachable aluminum side walls, approx. 400 mm high, anodized finish LOAD PLATFORM: - Load area, approx. 9,600 mm long, with rear chamfer approx. 900 mm x 6° - Loading platform behind the gooseneck hydraulically liftable and lowerable, approx. 3,000 mm long, loadable up to approx. 9,000 kg - TPMS tire pressure monitoring system according to ECE R 141 - BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steered. 3rd axle with electro-magnetic reverse lock activated via reverse gear and manually - Technical axle load: 12,000 kg each - Air suspension with lift and lower valve - 235/75 R 17.5 3PMSF twin tires. Brand at our discretion, load index 143/141J (144/144F) - Mechanical landing legs with 2-speed gearbox and crank - Continuous grating flooring with approx. 5 mm steel underlay as additional reinforcement, designed for point loads: - on the lift bed - on the load platform Nsdsyhkqujpfx Anzewk - Painted sand coating on the cover plates of the gooseneck as well as transition areas between gooseneck and lift bed, lift bed and load platform, and between load platform and ramps - 1 spare wheel mounting bracket under the load platform, right side before the axles - Cutouts in the outer frame of the platform and lift bed for hooking in tension belts (LC 2,000 daN) - 11 pairs of recessed lashing rings in the outer frame of the platform, foldable outward (LC 10,000 daN): - 3 pairs in the outer frame of the lift bed - 8 pairs in the outer frame of the platform - 11 pairs of recessed lashing rings along the central girder (LC 5,000 daN): - 3 pairs in the lift bed - 8 pairs in the rear part of the platform - Control valves for the hydraulic ramps on the right side of the vehicle - 1 pair of foldable mechanical rear supports with one-hand operation HYDRAULIC LOADING RAMPS: - 1 pair of two-part AXS steel ramps, approx. 4,920 mm long, and a...

Stanje: rabljeno, konfiguracija osi: 3 osi, prva registracija: 04/2019, dolžina tovornega prostora: 9.200 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 245/70R17.5, barva: siv, Leto izdelave: 2019, Faymonville F-S43-1AAF 660 cm, možnost podaljšanja Hidravlične rampe Vitli Prisilno usmerjeno = Dodatne informacije = Velikost pnevmatik: 245/70R17.5 Nodpfozinblex Anzewk Vzmetenje: zračna vzmet Prednja os: dvojne pnevmatike; usmerljiva; profil pnevmatike, levi notranji del: 50 %; profil pnevmatike, levi zunanji del: 50 %; profil pnevmatike, desni notranji del: 50 %; profil pnevmatike, desni zunanji del: 50 % Osrednja os: dvojne pnevmatike; usmerljiva; profil pnevmatike, levi notranji del: 50 %; profil pnevmatike, levi zunanji del: 50 %; profil pnevmatike, desni notranji del: 50 %; profil pnevmatike, desni zunanji del: 50 % Zadnja os: dvojne pnevmatike; usmerljiva; profil pnevmatike, levi notranji del: 50 %; profil pnevmatike, levi zunanji del: 50 %; profil pnevmatike, desni notranji del: 50 %; profil pnevmatike, desni zunanji del: 50 % Lastna teža: 13.500 kg Nosilnost: 47.500 kg Dovoljena skupna masa: 61.000 kg Številka modela: F-S43-1AAF / PODALJŠAN / HIDRAVLIČN = Informacije o podjetju = VSE CENE SO NETO ZA IZVOZ (Joris Versteijnen NL-DE-GB; Wouter Greutink NL-DE-GB-ES-IT). Govorimo rusko. Prizadevamo si, da bi navedli čim bolj natančne informacije. Kljub temu iz objavljenih besedil ne moremo izpeljati nobenih pravic.

Stanje: novo, največja dovoljena obremenitev: 36.040 kg, skupna masa: 53.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete inventory of immediately and short-term available vehicles can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck: * Gooseneck in SNT design to optimize loading deck length, approx. 3,750 mm long * Gooseneck hydraulically liftable/lowerable and detachable * For tractor units: 6 x 4 or 8 x 4 Lowbed: * Lowbed with exterior beams, extendable, SUPER LOW design, approx. 8,000 mm long * Lowbed with fixed hardwood flooring approx. 40 mm thick and mechanical locking * Supply lines routed protected within the extendable beams, automatically adapting to the lowbed length * 7 pairs of folding lashing rings outward (LC 10,000 daN) * 6 pairs of threaded mounting blocks on the inner beam for screwable RUD rings Rear chassis: * Rear chassis with closed outer frame and tread plate cover * Chassis with excavator recess, closed in the rear half to house air tanks * 3 pairs of folding lashing rings outward (LC 5,000 daN) * 1 pair of folding lashing rings outward (LC 10,000 daN) * 1 pair of horizontal lashing rings, positioned front & rear on the chassis (LC 10,000 daN) Axles: * BPW axles and suspension, all axles with hydro-mechanical forced steering * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * Tyres 245/70 R 17.5 3PMSF – manufacturer at choice. Load index (146/146F) Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Coating: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Finished with 2 coats of 2K paint, single-colored in RAL 3002 Carmine Red, per RAL System 841GL Includes accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * At the galvanized front connection strip, yellow-red air couplings * Remote axle steering, from front and rear, operated by cable remote control with push buttons, including axle alignment monitoring (without installation on the tractor unit) * Preparation for bolt-on container lockings to accommodate 1 x 20', 1 x 40', or 1 x 45' container on the outer rails. Without container locks * Hydraulic connections from gooseneck to lowbed with a multicoupling instead of screw couplings * Electrohydraulic unit * Spiral cable (approx. 35 mm², approx. 3.5 m in length, max. 250A) for the power supply to the electrohydraulic unit and/or the electric winch, with plug connection (NATO-NATO) between trailer and tractor unit * Yellow reflective tape according to EU regulations, on the sides, extension, and at the rear of the trailer * At the gooseneck front and rear left and right, each with a holder for warning signs, including socket * Manual and documentation on USB stick * Central lubrication system with 2 pumps BEKAMAX (Pico) with standard grease NLGI-2 and removable protection for the pumps Njdpfey Uwu Ijx Anzswk * 7 pairs of threaded blocks between the lashing rings under the top flange on the outer rail for mounting screwable RUD rings VLBG-4 * 2nd ride height, approx. 50 mm above standard ride position, selectable via manual control * On the gooseneck, plug-in ALU side and rear walls approx. 2,440 x 400 mm (L x H). The rear, galvanized plug-in stanchions are removable (superstructure length approx. 2,560 mm) * Separate air connection with air gun on the gooseneck * A stainless steel toolbox, INOX, approx. 1,350 x 400 x 400 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, moč: 48 kW (65,26 KM), vrsta goriva: dizel, lastna masa: 7.475 kg, Leto izdelave: 2010, obratovalne ure: 8.809 h, vrsta pogona: Diesel, Mini bager Tehnično stanje: dobro Opis: Bager – gosenični bager – mini bager TAKEUCHI TB 175 – – letnik 2010 – – 8809 delovnih ur – – hidravlični sistem za hitro menjavo – – –MARTIN-POWERTILT – – KLIMATSKA NAPRAVA – – 2 kos lopat za izkop, 40 + 60 cm – – 1 kos lopata za izravnavanje, 150 cm – – – 4-valjni dizelski motor YANMAR, 48,2 kW – – – gosenice, približno 50 % obrabe – – ČRPALKA ZA TOČENJE DIZLA – – 3. + 4. hidravlični krog – – 12-voltni sistem – – – dobro ohranjeno originalno stanje Hitri sistem za menjavo, lopate, 3. ventil, 4. ventil, delovne luči zadaj, delovne luči spredaj, gretje, popolna kabina, klimatska naprava. Nwjdpfx Anjzqxipszek

Stanje: novo, največja dovoljena obremenitev: 37.619 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 9.240 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLS 3 / 0N ? 18/30 | Year of Manufacture: 2025 | NEW | 40-t ramps | Top equipment Location: Germany Condition: New / unused Availability: Immediate Description: For sale: brand new Kässbohrer K.SLS 3 / 0N ? 18/30 low loader, year of manufacture 2025. Perfect for transporting construction machinery, equipment, and heavy goods. Robust chassis, high-quality axles, heavy-duty ramps – ready for immediate use. --- Technical Specifications Dimensions - Total length: 13,190 mm - Platform length: 9,240 mm Nwedpfx Aox Efzusnzsk - Platform height: 875 mm - Overall width: 2,550 mm (extendable by +600 mm with side extensions) - Gooseneck length: 3,950 mm - Unladen weight: approx. 10,381 kg Weights - Perm. total weight at 80 km/h: 48,000 kg - Perm. total weight at 60 km/h: 52,800 kg - Total axle load: 30,000 kg - King pin load: up to 18,000 kg --- Running Gear & Axles - 3 BPW axles, air suspension, drum brakes - 1 rear trailing axle - Lift axle (load-dependent + automatic control from the cab) - Tyres: 245/70 R17.5, M+S + 3PMSF - Tire pressure monitoring R141 - Wabco EBS 4S/3M, ABS + RSS - Wabco Smartboard (axle load, suspension, diagnostics, etc.) --- Ramps & Loading Area - Foldable 40-t drive-on ramps - Ramp length: 2,750 mm - Ramp width: 850 mm - Hydraulic sliding system - 45-mm hardwood floor + checker plate over wheel arches --- Load Securing - Multiple lashing points, 8,000 daN and 13,400 daN - 7×2 stake pockets + plug-in stakes - Container locks for 1×20 ft - Front board 450 mm, side & rear walls made of aluminium --- Body & Chassis - High-strength S700 MC steel - Partial metallisation (Zn/Al 85/15) – superior corrosion protection - Rear angle: 10°, 500 mm - 2" king pin - Mechanical support legs at the front - 45-t rear supports --- Equipment - 2× toolboxes - Rotating beacon - LED lighting - Reverse work lights - Wheel chocks - Extensions 9×2 (up to +300 mm) - Stake box - Reflective strips on sides and rear --- Colour: RAL 3020 traffic red For further information, please feel free to contact us.

Stanje: rabljeno, lastna masa: 10.600 kg, največja dovoljena obremenitev: 22.500 kg, skupna masa: 33.100 kg, konfiguracija osi: 3 osi, prva registracija: 12/1984, dolžina tovornega prostora: 11.900 mm, širina tovornega prostora: 2.730 mm, višina nakladalnega prostora: 950 mm, vzmetenje: jeklo, velikost pnevmatike: 7.50R15, barva: siv, prevoženi kilometri: 1.001 km, vrsta prenosa: drugo, voznikova kabina: drugo, Vehicle location: Bovenden, 3 axles, SAF axles, leaf suspension, lashing rings, split loading ramps (2-piece), mechanical ramps, side aluminium underrun protection, supports, twin tires Nedpoi Rp A Nsfx Anzjwk Body: 3-axle low-loader semi-trailer with 2-piece mechanical loading ramps, loading length on lower platform approx. 8,900 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Stanje: novo, največja dovoljena obremenitev: 37.350 kg, skupna masa: 45.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Selection of equipment features. Full equipment specification available on request. Chassis: * Welded construction using high-quality steel profiles with through cross-members, designed for high floor and point loads, equipped with heavy-duty outer frame * Rear loading deck as a steel welded construction with two welded-on external driving tracks made of 5-hole steel plate (Lohr/Rolfo pattern) over a length of approx. 2,250 mm, hydraulically lowerable by approx. 350 mm * Integrated at the rear of the vehicle is a hydraulically extendable loading platform (approx. 1,500 mm) as a steel welded construction with 5-hole steel plate (Lohr/Rolfo pattern) cover, lighting mount, and two ramp compartments with ramp supports * Rear operation and control via an electric-hydraulic unit mounted in a stainless steel box on the left side of the chassis, operated by remote control * Power supply via the towing vehicle’s battery * NATO socket on the front wall (no connecting cable to tractor unit) Coupling device: * 2-inch kingpin, replaceable from below Underrun protection: * Fixed installation compliant with EC regulations Landing legs: * 2 x 12 t support winches with 2-speed gearbox Axles: * 3 x 10 t air suspension axle units, SAF brand with disc brakes approx. 370 x 45 mm, ABS, 10-stud hub-centered ET120 wheel connection, total air suspension travel approx. 200 mm (lifting approx. 140 mm, lowering approx. 60 mm), air suspension controlled via hand valve with stop function Steering axle: * 3rd axle as trailing steering axle with manual and automatic reverse lock Lifting axle: * 1st axle automatically liftable, additionally switchable via control on chassis frame or via pin 12 of lighting socket Tyres: * 6 units, 445/45R19.5 brand of our choice, mounted on 14.00x19.5 rims, 10-stud ET120 Mudguards: * EC-compliant, 1/4 PVC mudguards before and after the wheels on the 1st axle (front and rear), 2nd and 3rd axles (rear) Spare wheel holder: * None Brake system: * Two-line brake system according to EC with EBS, automatic load-dependent braking * Spring-loaded brake as parking brake acting on 2 axles, anti-swapping couplings fixed on front cross beam, no connecting line to tractor unit, Wabco brand Lighting system: * EC-compliant, 24-volt, multi-chamber rear lights, license plate lights, LED side marker lights, LED front position lights, and LED lane departure lights at rear, 15-pin socket as well as 2x7-pin sockets fixed on front cross beam, no connecting cables to tractor unit Load securing: * 9 pairs of folding lashing rings evenly distributed, tie-down force approx. 8 t * 7 pairs of folding lashing rings evenly distributed, tie-down force approx. 2.5 t * 2 pairs of folding lashing rings at rear, tie-down force approx. 2.5 t * Drilled holes for tension belts in outer frame every approx. 500 mm Stake pockets: * 16 stakes approx. 100/40 mm, usable length approx. 800 mm Stake pocket holders: * Each side 8 pockets integrated into outer frame * 4 rows of transverse stake pockets across the platform Floor: * Approx. 28 mm Z-hardwood floor set into outer frame Front wall: * Solid front wall, stake holder for 16 stakes approx. 100/40 * Front wall bolted to head frame Nwodpfsy Up S Sox Anzok Equipment: * 2 wheel chocks with holders * 2 PVC toolboxes, approx. 600/400/500 mm * Rear beacon holder including lamp * 2 pcs LED rear ...

Stanje: rabljeno, Leto izdelave: 1994, Prostornina rezervoarja / l Izstopni tlak / bar Masa / kg HIDRAVLIČNA ENOTA HYDROPA 1ZP4N1-040/3 H2-2 008R Pretok: 40/8 l/min Nedezmapcspfx Anzjwk Moč: 5,5 kW Pmax.: 60/210 bar

Stanje: dober (rabljeno), Leto izdelave: 2002, Hydraulic power unit, hydraulic pump, universal hydraulic station -Manufacturer: Couperus Hydrauliek, hydraulic station from louvre/blind production -Housing: Stainless steel (VA) -Motors: 5x elsto 1.5 kW -Pressure: up to 250 bar -Flow rate: 10 l/min Nwedopy Rx Tjpfx Anzsk -Individual components: see photos -Dimensions: 2100/660/H1040 mm -Weight: 554 kg

Stanje: dober (rabljeno), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, swing cylinder -Manufacturer: Orsta, double-acting hydraulic cylinder, stroke 320 mm -Type: B2-40/18x320/3 TGL10906 -Piston rod: Ø 18 mm Njdpfx Ajv I Srionzewk -Mounting: Ø 25 mm / distance 525 mm -Dimensions: Ø 60 x 590 mm -Weight: 5.2 kg

Stanje: rabljeno, Hydraulic power unit, hydraulic pump -for: Zapfenschläger Harbs ZSMV/2 -maximum pressure: 70 bar -motor: 1.5 kW, 1405 rpm -quantity: 1 unit available -dimensions: 465 x 260 x H520 mm Nwjdpfx Aedwc I Ronzsk -weight: 58 kg

Stanje: dober (rabljeno), Hidravlična enota, hidravlična črpalka, univerzalna enota, zobniška črpalka, dvojna hidravlična črpalka -Proizvajalec: Orsta, dvojna hidravlična črpalka -Črpalka 1: Tip A 16 R Nwedpfoibd Sxox Anzok -Črpalka 2: Tip C16-3R -Motor: VEM 11 kW / 1440 obr/min -Količina: 2x hidravlična enota na voljo -Cena: na kos -Dimenzije: 840/270/V335 mm -Teža: 107 kg/kos.