Faymonville Max810 Semi-Tieflader 2+6 - 2Fach Tele nakup rabljenega (101.148)

Stanje: novo, največja dovoljena obremenitev: 96.500 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 26.900 mm, skupna širina: 2.750 mm, Oprema: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Gooseneck: * Hydraulically lift/lowerable and detachable gooseneck, approx. 3,650 mm long * For tractor units: 6x4 or 8x4 Lsdezahp Sepfx Acajrr * Truck hydraulic connection with flow control (20 l/min), incl. gantry for supply line suspension; the tractor unit tank must have at least 80 l capacity * With MAX Trailer coupling units; otherwise, coupling units to be provided ex works by the customer * Gantry with winch for spare wheel mounted at the front of the gooseneck * 3.5-inch king pin * Steel front wall approx. 400 mm high * Removable aluminium side and rear boards on the gooseneck, approx. 400 mm high, anodised finish * Control lever on the gooseneck protected by a folding cover * Operator area lighting at gooseneck, with on/off switch * One 7-pin socket each at the left and right rear of the gooseneck for warning sign * BEKA-MAX central lubrication system for one gooseneck with standard NLGI-2 grease * Hydraulic connections from the gooseneck to the low-bed via screw couplings * Access steps on the gooseneck * Four warning panels extendable by approx. 1,000 mm (approx. 423 x 423 mm) each, with one LED position lamp and bracket for beacon * Mounting adapters for 2 spare wheels * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 hp) at 3,000 rpm * Hydraulic connecting lines between powerpack and connector plate at the gooseneck * One LED worklight left and right on the rear plate of the gooseneck, individually switchable * Radio remote control for: - Operating the powerpack, start/stop of diesel engine. - Operating remote steering (in addition to cable remote), with 2 LED indicator lights on receiver for single-track control. - Lift/lower gooseneck. - Lift/lower suspension of running gear 2-axle front module: * Bolt-eye coupling front and rear. Length: approx. 2,970 mm. Module width: approx. 2,750 mm * BEKA-MAX central lubrication system for 2-axle module with standard NLGI-2 grease (not connected to steering rods) * One 7-pin socket each at the left and right rear of the front module for warning signs * Platform surface with sand coating as slip protection * Yellow reflective tape in accordance with EU regulations at the sides, on the extension, and at the rear of the trailer * One 7-pin socket for warning signs, left and right on the front module, in the axle area * Extendable outriggers approx. 230 mm per side for the 2-axle module * 1 pair M42 threaded blocks between the axles of the front module * 1 pair brackets for plug-in warning panels in the stake pockets of the exterior frame of the loading area Loading platform: * 6-axle, double telescopic loading platform with bolt-eye coupling at the front and rear chamfer approx. 500 mm x 8° * Platform length: approx. 11,000 mm * Technically extendable by: approx. 8,200 + 7,700 mm * Axle spacing: approx. 1,500 mm * Base width: approx. 2,750 mm * Hydraulic coupling pin * BEKA-MAX central lubrication system for the platform with standard NLGI-2 grease * Platform surface with sand coating as slip protection * 11 pairs of recessed lashing rings in the external frame of the loading platform, foldable outwards (LC 10,000 daN) * Permanently welded intermediate table, approx. 500 mm long * 1 pa...

Stanje: novo, največja dovoljena obremenitev: 98.290 kg, skupna masa: 126.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our entire range of vehicles that are immediately and soon available on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * MAX810-neck-V-30-2.70-2{DSR 2 700/ASH 1300->1400} * Gooseneck hydraulically liftable/lowerable as well as removable. Length approx. 3,650 mm * Truck hydraulic connection with flow controller (20 l/min), * incl. gallows for suspension of supply lines, tractor unit (SZM) tank must hold at least 80 l, with MAX Trailer coupling pieces; otherwise, coupling pieces to be provided by the customer ex works. * For tractor units: 6 x 4 or 8 x 4 Lsdpjzbfuhofx Acajrr Loading Platform MAX810-6-A-11.00-17.5-1.50-2.75-PA-X * 6-axle extendable loading platform with pin-lug coupling at the front and approx. 500 mm x 8° chamfer at the rear. * Length: approx. 11,000 mm * Technically extendable by: approx. 7,700 mm * Axle spacing: approx. 1,500 mm * Hydraulic coupling bolt. Pendulum axle 2-axle front running gear, pendulum axle * All axles are hydromechanically forced steered. * MAX810-chassis-PA-X-F-2-17.5-1.50-2.75 pin-lug coupling front and rear. * Length: approx. 2,970 mm, chassis width: approx. 2,750 mm * BEKA-MAX central lubrication for a 2-axle running gear with standard grease NLGI-2 * Extendable widenings of approx. 230 mm per side for a 2-axle running gear. (± 27 kg) PENDULUM AXLE 6-AXLE LOADING PLATFORM, PENDULUM AXLE * All axles hydromechanically forced steered. * Hose burst valve on the axle compensation cylinder with automatic reset function. * Hydraulic cylinders with shut-off valves and pre-pin for securing in raised position. * Technical axle load: 13,740 kg each (30 km/h) * Hydraulic axle compensation. TYRES * 24 x manufacturer of our choice (M+S) 245/70 R17.5 * Load index 143/141L (146/146F) * TPMS: TPMS tyre pressure monitoring system in accordance with ECE R 141. Final coating of the axles * Painted with two coats of single-colour 2-component paint in DB7350 nova grey. * PAINTING Complete steel structure automatically blasted with shot blasting system after welding. * Second blast processing with corundum for optimal adhesion of the coating system. * HRM-metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection. * PAINTING Trailer carmine red (RAL 3002) Including the following accessories * Gallows with winch for spare wheel at the front of the gooseneck. * 3.5 inch king pin * Steel front wall approx. 400 mm high. * Plug-in ALU side boards and rear wall on the gooseneck, approx. 400 mm high, anodized version. * Control lever on the gooseneck protected by a foldable cover. * Lighting of the controls on the gooseneck with on/off switch. * One 7-pin socket left and right rear on the gooseneck for the warning sign. * Load gauge on the gooseneck for axle load determination on the running gear at front and rear * BEKA-MAX central lubrication for a gooseneck with standard grease NLGI-2. * Hydraulic connections from the gooseneck to the low bed with screw couplings. * Access possibility on the gooseneck. * 1-cylinder Hatz diesel engine (Silent Pack) with electric starter and starter battery. Output: 9.5 kW (12.9 HP) at 3000 rpm, emission level: EU Stage V, max. hydraulic pressure: 280 bar, max. flow: 21 l/min, installation on the gooseneck. * Hydraulic oil tank 100 L, frame hot-dip galvanized (± 480 kg) * Hydraulic connection lines between powerpack and plug-in plate on the gooseneck. * Radio remote contr

Stanje: rabljeno, največja dovoljena obremenitev: 34.030 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 07/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Celoten seznam naših vozil, ki so na voljo takoj ali v kratkem roku, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. "Labodji vrat" (swan neck) z zadnjim naklonom cca 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN) Trdna lesena obloga, debeline cca 30 mm. Tovorilna površina. Tovorilna površina se po "labodjem vratu" hidravlično dviga in spušča, dolžina cca 2.800 mm, z zadnjim naklonom cca 1.000 mm x 8°. 6 parov pritrdilnih obročev, z možnostjo zlaganja navzven (LC 5.000 daN). 2 para pritrdilnih obročev, z možnostjo zlaganja navzven (LC 10.000 daN). 1 par pritrdilnih obročev, z možnostjo zlaganja navznoter, na centralnem nosilcu spredaj (LC 10.000 daN). Rešetkasta obloga C40/4 (točkovna obremenitev cca 2,3 t na površini cca 20 x 20 cm) nad osmi. Obloga iz valjanega jekla. Dvodelne jeklene rampe. Ena para pocinkanih, dvodelnih jeklenih ramp, okrepljene izvedbe, cca 3.185 + 1.420 x 1.250 mm, z rešetkasto oblogo C40/5 (točkovna obremenitev cca 8 t na površini cca 20 x 20 cm). Rampa z hidravlično dvigljivimi in zlaganimi deli rampe ter hidravličnim dvižnim mehanizmom, maksimalna obremenitev na par: 40.000 kg. V skladu z uredbo 1230/2012/EU se rampe z dolžino, krajšo od 300 mm, v vožnji ne upoštevajo pri izračunu dolžine vozila (16.500 mm). Podporne noge sedelne spojke. JOST podpore sedelne spojke (mehanske) z 2-stopenjsko prestavo za cca 24 t dvižne nosilnosti (cca 50 t preizkusne nosilnosti). Pnevmatike 235/75 R 17.5 3PMSF. TPMS sistem za nadzor tlaka v pnevmatikah, skladno s standardom ECE R 141. Osi. BPW osi in vzmetenje. Lrodpszu Ebtefx Acaer 2 fiksni osi, 1 os z vodilnim členom. Tehnična nosilnost osi: 12.000 kg na os. Elektro-magnetična blokada za vožnjo nazaj, aktivira se preko prestave za vožnjo nazaj in ročno. Zračno vzmetenje z ventilom za dvig in spuščanje. Zavorna sistema. WABCO zavorna sistema v skladu z evropskimi predpisi z EBS-E (2S2M). Barve. Prikolica RAL 3002 karminsko rdeča. Platišča srebrna. Ponjava v RAL 9006 srebrna. Vključeno. 1 nosilec rezervnega kolesa pod tovorilno površino na desni strani, v smeri vožnje. 2 palčni kraljevski zatič. Ena pocinkana jeklena čelna stena. Na pocinkani priključni letev spredaj, rumeno-rdeče zračne spojke. 4 kosi klinih z nosilcem na čelni steni. 3 višine lesenih plošč. Pocinkane, zložljive podpore pod naklonom tovorilne površine. Višinsko nastavljiva nadgradnja s ponjavo *3.960 mm*. Pocinkana čelna stena z mehanizmom za napenjanje za drsno zaveso. Strop blagovne znamke EDSCHA, višinsko nastavljiv za cca 400 mm, premakljiv naprej na aluminijastem profilu strehe (privit na sprednjo in zadnjo steno). Na tovorilni površini 3 pari drsnih letven. Nadgradnja se lahko na zadnji strani na levi in desni strani hidravlično razširi za cca 750 mm. Drsna ponjava z cca 700 mm rezerve v dolžino, z napenjalnimi trakovi v razmaku cca 600 mm. Zgornji rob nadgradnje cca 3.960 mm (obremenjeno). Vožnja z odprto drsno ponjavo ni dovoljena in povzroči poškodbe ponjave. Na valjanem jeklu na "labodjem vratu" in na tovorilni površini, vgrajena plast peska kot zaščita proti zdrsu. Pokrivne plošče za premostitev prostora med rampami in tovorilno površino. Elektro-hidravlična agregat zadaj pod tovorilno površino. Na "labodjem vratu" in na rampah, na levi in desni strani, vsak nosilec za opozorilne table, vključno z vtičnico. Upravljalni ventili za rampe, nameščeni na desni strani prikolice. Rešetkasta obloga na naklonu "labodjega vrata" C30/3 (točkovna obremenitev cca 2 t na površini 20 x 20

Stanje: novo, največja dovoljena obremenitev: 42.900 kg, skupna masa: 55.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 29.000 mm, skupna širina: 2.540 mm, Oprema: ABS, The complete inventory of vehicles, including those available for immediate and short-term delivery, can be found on our website. Extract from the equipment list. Full specifications available upon request. Loading Platform: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform, double extendable, length approx. 9,300 mm * A support plate, approx. 200 mm wide, is permanently welded to the central beam * Pneumatic locking system with conical locking pin and reinforced locking positions; supply lines are protected within the extendable beams and automatically adjust to the current platform length (except for the supply of the first and second locking positions) * Technical fifth wheel load: 25,000 kg Suitable for tractor units: 4 x 2, 6 x 2, and 6 x 4 Ljdpfx Acjyvnd Nsaerr * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, all axles hydro-mechanically forced steered, mounted on turntables * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 275/70 R 22.5 3PMSF twin tires. Brand at our discretion * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic power unit for operating hydraulic functions * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable to the outside * 1 pair of lashing rings at the king pin (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets recessed in the outer frame of the gooseneck for plug-in stakes approx. 100 x 50 mm * 1 stake pocket bar mounted transversely on the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 1x at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets recessed in the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings in the outer frame of the loading platform, foldable to the outside * Remote steering from the front and rear via cable remote control, with axle tracking control, no installation required in the tractor unit * Last axle with air bellows venting activated when parking brake is applied * Steel front wall, approx. 1,600 mm high, certified design according to EN12642:2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light on each side at the landing gear, wired to the tractor unit connection bar * Approx. 32 mm wooden floor on the gooseneck and the loading platform * On the large-section extension tube, one locking position every approx. 500 mm * On the small-section extension tube, one locking position every approx. 1,000 mm, enabling locking at every approx. 500 mm * Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,500 daN) * 4 stake pocket bars mounted transversely on the loading platform floor for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder mounted under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in the direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in the direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle equipped with automatic lift axle function as well

Stanje: novo, največja dovoljena obremenitev: 39.720 kg, skupna masa: 50.960 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete range of vehicles, including immediately and short-term available units, can be found on our website. Excerpt from the equipment list. Full specification available on request. Gooseneck * With beveled front corners, approx. 45°, and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area * Extendable loading area version * 5 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of lashing rings laid flat at the front of the loading area (LC 10,000 daN) * Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) Lrodpfx Acsu Sd U Usajr * Hardwood flooring approx. 48 mm thick, checker plate covering above the axles Landing legs * JOST (mechanical) with two-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles * BPW axles, two fixed, two self-steering, with drum brakes * Air suspension with raise/lower function * Self-steering axle with electromagnetic reverse lock, activated by reverse gear or manually * Tyres: 205/65 R 17.5 Braking system * Wabco braking system meeting EU regulations with EBS-E (4S3M), without interconnection lines to the tractor unit Steel Construction * Made from high-tensile fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, long-lasting corrosion protection for the standard shot-blasted welded frame, ensured by a two-component (2K) zinc dust primer * High-grade, single-color two-component (2K) topcoat in RAL 3002 Carmine Red * Rear section metallized and finished in RAL 9010 (Pure White) * Wheels in silver Accessories included * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Spare wheel holder in front of the front wall * Yellow-red air couplings on galvanized front connection rail * 4 wheel chocks with holder on the front wall * Rear section of the gooseneck with mounting for aluminium ramps * Galvanized folding supports under the rear bevel of the loading area * Bracket for a beacon on the trailer’s rear * Yellow reflective tape on the sides, extension, and rear, in compliance with EU regulations * Holders for warning signs with socket on left and right of gooseneck and rear panel * TPMS tire pressure monitoring system according to ECE R 141. Data transfer to the towing vehicle is via the standardized EBS interface per ISO 11992; for correct display the towing vehicle must be able to receive and display the data * On the gooseneck: clip-on aluminium side and rear panels, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * One galvanized toolbox integrated into the beveled gooseneck * 6 pairs of WADER container pockets in loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container * Sliding brackets for aluminium ramps at the vehicle’s rear * 7 pairs of stake pockets for removable stakes, approx. 100 x 50 mm in the outer frame of the loading area * One galvanized transverse holder under the loading area * Galvanized, extendable outriggers for widening by approx. 230 mm per side * Lift axle on the front axle controlled by TEBS E depending on current axle load and loading condition * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 09/2020, barva: rdeča, Leto izdelave: 2020, Oprema: ABS, Rear axle 1: Dual tires Rear axle 2: Dual tires; Steering axle Lredsx Upxxspfx Acasr Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWBED TRAILER 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Length 680 cm + 420 cm extendable, total platform length 1,100 cm Platform width 254 cm Platform height approx. 86 cm Gooseneck length 330 cm Lashing eyes, stake pockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowbed trailer built in 2016, but sold as new in 2020 We speak German Hablamos Español We speak English

Stanje: rabljeno, največja dovoljena obremenitev: 19.080 kg, skupna masa: 28.480 kg, konfiguracija osi: 2 osi, prva registracija: 08/2025, naslednji pregled (TÜV): 08/2026, POZOR: upravljati samo s kipo hidravliko! BPW 10t osi, 2 krmiljeni osi, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, POZOR: upravljati samo s kipo hidravliko! Višina sedla 1,25 m, hidravlično 1400x700 + ročno 700, Lrsdpfxjykgkcs Acajr

Stanje: rabljeno, največja dovoljena obremenitev: 37.885 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 08/2024, naslednji pregled (TÜV): 08/2026, Oprema: ABS, Izvleček – oprema Nosilna površina * v izvlečni izvedbi z zadnjo nagibno površino, približno 1.000 mm x 8° Obloga iz trdega lesa * približno 48 mm debeline, nad osmi rebrasta pločevina JOST opore za sedelno prikolico * (mehanske) z 2-stopenjskim menjalnikom za približno 24 t dvižne obremenitve (približno 50 t testne obremenitve) BPW osi in vzmetenje * 2 trdni osi * 1 os s krmiljenim zglobom * Tehnična osna obremenitev: 12.000 kg na os Zračno vzmetenje * z ventilom za dvig in spuščanje Zavorna naprava * v skladu z direktivami EU, z EBS-E (2S2M) Dodatna oprema * 2-palčni kraljevi zatič * Ena pocinkana jeklena čelna stena, približno 400 mm visoka * Merilnik obremenitve za ugotavljanje osne obremenitve, vključno z diagramom obremenitve Lredszv A Aqjpfx Acaor * Na podaljšku (gooseneck) aluminijaste stranske stene in zadnja stena, ki se lahko pritrdijo, približno 2.440 x 400 mm (D x V) * Ena orodjarna omara, pocinkana, integrirana v nagibni podaljšek (± 47 kg) * 3 pari WADER žepov za kontejnerje na nosilni površini za 20' (30') ali 40' kontejner. (± 30 kg) * 6 parov žepov za podpore za vstavljive podpore, približno 100 x 50 mm, na zunanjem okvirju nosilne površine. (± 18 kg) * Podaljški, pocinkani, izvlečni za približno 230 mm na stran (± 230 kg) * Dvignjena os na sprednji osi * Premikalne vstavne letve za aluminijaste priklopne rampe na zadnji strani vozila * 2 LED luči za vzvratno vožnjo, nameščeni na zadnji plošči * 2 para Ferry obročev pod podaljškom in 2 para zadaj (± 16 kg) * Štiri opozorilne table, ki se lahko izvlečejo za približno 400 mm, približno 423 x 423 mm, z LED pozicijsko lučjo. (± 25 kg) * Na opozorilnih tablah nosilec za rotacijsko luč * Rotacijska luč, priložena ločeno * HRM-metalizacija (metalizacija z visoko odpornostjo) Lakiranje * Končni sloj lakiranja, enobarvna barva RAL 3002, karminsko rdeča.

Stanje: rabljeno, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 03/2026, Oprema: ABS, Izbor iz opreme. Celotna oprema na zahtevo. Prijeknica * s poševnimi robovi spredaj, približno 45° in zadaj, poševnost približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * trdna lesena obloga, debeline približno 30 mm, nakladalna površina v izvlečni izvedbi z zadnjo poševnostjo približno 1.000 mm x 8° * 5 parov pritrdilnih obročev, zložljivih navzven (nosilnost 5.000 daN) * 3 pari pritrdilnih obročev, zložljivih navzven (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščenih ležeče spredaj na nakladalni površini (nosilnost 10.000 daN) * izrezi v zunanjem okvirju nakladalne površine za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * trdna lesena obloga, debeline približno 48 mm, nad osmijo, obložena z rebrasto pločevino Podporke za sedelno prikolico * JOST-podporke za sedelno prikolico (mehanske) z 2-stopenjskim menjalnikom za dvigovno kapaciteto 24 t (testna obremenitev 50 t) Pnevmatike * 235/75 R 17.5 3PMSF Lsdpfx Acszkx Husaorr Osi * BPW osi * dve osi fiksni, dve osi s sledilnim sistemom * z zračno vzmetjo in bobnasto zavoro s funkcijo dvigovanja/spuščanja * Sledilne osi z elektromagnetno blokado pri vožnji vzvratno, ki se aktivira prek prestave za vožnjo vzvratno ali ročno Zavorna naprava * WABCO zavorna naprava v skladu z uredbami EU, z EBS-E (4S3M) brez povezovalnih kablov za priklopno enoto Barvanje * Kakovostna dvokomponentna (2K) barva * Končna barva, enobarvna, v odtenku RAL 3002 karmin rdeča Dodatna oprema * Nosilec za rezervno kolo pred čelno steno (brez rezervne pnevmatike) * 2-palčni priklopni člen (King Pin) * Pocinkana jeklena čelna stena, višina približno 400 mm * Na pocinkani priključni letev spredaj, rumeno-rdeči zračni priključki * 4 kosi zavornih klinov z nosilcem na čelni steni, nosilci na zadnjem delu prijeknice za aluminijaste nakladalne rampe * Pocinkane zložljive podpore pod poševnostjo nakladalne površine * Nosilec za okroglo luč na zadnjem delu prikolice * Rumeno refleksno traku v skladu z uredbami EU, na strani, na izvlečni sekciji in na zadnji strani prikolice * Na prijeknici in na zadnji plošči, na levi in desni strani, nosilci za opozorilne table, vključno z vtičnico * Dinamometer za merjenje obremenitve osi * Vključno z diagramom obremenitve Vključno s specialno dodatno opremo * Na prijeknici aluminijaste stranske stene in zadnja stena, vstavljive, približno 2.440 x 400 mm (D x V) * Orodjarna omara, pocinkana, integrirana v poševno prijeknico * 3 pari WADER-jevih zabojnikov na nakladalni površini za 20- (30-) ali 40-čevljen spodnji zabojnik * Premikajoče se vstavljive letev za aluminijaste nakladalne rampe na zadnjem delu vozila * 6 parov reže za vstavljive stojne palice, približno 100 x 50 mm * V zunanjem okvirju nakladalne površine, pocinkane, razširitve, izvlečne približno za 230 mm na stran * Dvignjena os na prednji osi, upravljanje prek TEBS E 2 LED-luč za vožnjo vzvratno, nameščena na zadnji plošči * 2 para Ferry-jevih obročev pod prijeknico in 2 para zadaj * Akustični opozorilni signal pri vožnji vzvratno, HRM-metalizacija (metalizacija z visoko odpornostjo)

Stanje: rabljeno, največja dovoljena obremenitev: 48.300 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, prva registracija: 03/2025, naslednji pregled (TÜV): 07/2027, Oprema: ABS, Izvleček iz opreme. Celotna oprema na zahtevo. Gansji vrat (swan neck) z nagnjenimi robovi spredaj, približno 45° in z zadnjim nagnjenjem, približno 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN). Trdna lesena obloga, debeline približno 30 mm. Nosilna ploščad v dvojno izvlečni izvedbi z zadnjim nagnjenjem, približno 500 mm x 8°. 5 parov pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 5.000 daN). 4 pari pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno spredaj na nosilni ploščadi (LC 10.000 daN). 1 vmesna miza, približno 250 mm. Izrezi v zunanjem okvirju nosilne ploščadi za pritrditev zateznih trakov (LC 2.000 daN). Trdna lesena obloga, debeline približno 48 mm, nad osmi rebrasta jeklena obloga. Osi BPW osi in vzmetenje, vse osi hidro-mehansko prisilno usmerjene. Tehnična obremenitev osi: 12.000 kg na os. Zračno vzmetenje z ventilom za dvig in spuščanje. Pnevmatike 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F). Podpora sedelne ročice JOST podpore sedelne ročice (mehanske) z dvostopenjsko prestavo za približno 24 t dvižne sile (približno 50 t testna obremenitev). Zavorna naprava v skladu z evropskimi predpisi z EBS-E (4S3M), brez povezovalnih cevi do vlečnega vozila. Barvanje Vrhnja kakovostna in dolgotrajna zaščita proti koroziji standardno peskanega varjenega okvirja, zagotovljena z dvokomponentno (2K) cinkovo temeljno barvo. Kakovostno dvokomponentno (2K) zaključno barvanje, enobarvno, v barvi RAL 3002, karminsko rdeča. Zadnji del je metaliziran in barvan v barvi RAL 9010 (čista bela). Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa). Električna napeljava v skladu z evropskimi predpisi. Razsvetljava 24 voltov, ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S in 15-polnim priključkom v skladu z ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098. Vključno z naslednjo dodatno opremo: 2-palčni kraljevi zatič (Königszapfen). Pocinkana jeklena čelna stena, približno 400 mm visoka. Rumeno-rdeče zračne spojke na pocinkani priključni letvi spredaj. 4 kosi zavorne čevlje z nosilcem na čelni steni. Nosilec za rezervno kolo pred čelno steno. Elektro-hidravlična agregatna enota. Pomožno krmiljenje spredaj in zadaj s kabelskega daljinskega upravljalnika, upravljanje s pritiskom na gumbe, z nadzorom ene osi (brez vgradnje v vlečno vozilo). Sistem za nadzor tlaka v pnevmatikah (TPMS) v skladu z ECE R 14. Manometer za obremenitev za ugotavljanje obremenitve osi, vključno z diagramom obremenitve. Na gansjem vratu aluminijaste bočne stene in zadnja stena, vstavljive, približno 2.440 x 400 mm (D x V). Zadnji pocinkani vložni okvirji so odstranljivi (dolžina nadgradnje približno 2.560 mm). Orodjarna škatla, galvanizirana, integrirana v nagnjeni gansji vrat. 4 pari žepov za kontejnerje WADER na nosilni ploščadi za 20', 2x 20', 40' ali 45' kontejner. 7 parov žepov za okvirje za vložne okvirje, približno 100 x 50 mm, v zunanjem okvirju nosilne ploščadi. Podaljški, pocinkani, izvlečni za približno 230 mm na stran. Drseče vložne letve za aluminijaste rampe na zadnji strani vozila. Lrodpfezqiitsx Acaer 2 para Ferry obročev pod gansjim vratom in 2 para zadaj.

Stanje: rabljeno, največja dovoljena obremenitev: 36.515 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 05/2023, naslednji pregled (TÜV): 05/2027, Oprema: ABS, Izvod opreme: V-priklop: V-priklop s poševnimi robovi, spredaj pribl. 45° in zadaj pribl. 750 mm x 10°. 3 pari pritrdilnih obročev (LC 5.000 daN). Tla iz trdega lesa, debeline pribl. 30 mm. Platforma z raztegljivo izvedbo: Platforma z raztegljivo izvedbo in zadaj poševnimi robovi pribl. 1.000 mm x 8°. 5 parov pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 5.000 daN). 3 pari pritrdilnih obročev, zunanji, z možnostjo zlaganja (LC 10.000 daN). 1 par pritrdilnih obročev, nameščen vodoravno na sprednjem delu platforme (LC 10.000 daN). Tla iz trdega lesa, debeline pribl. 48 mm, nad osmi rebrasto jeklo. Osi: Osi BPW in vzmetenje, vse osi so hidravlično-mehansko prisilno usmerjene. Tehnična obremenitev osi: 12.000 kg na os. Zračno vzmetenje z ventilom za dvig in spuščanje. Orodje za osi. Pnevmatike: Pnevmatike 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) – znamka po naši izbiri. Podporne noge: JOST podporne noge (mehanske) z 2-stopenjskim menjalnikom za pribl. 24 t nosilnosti (pribl. 50 t testna obremenitev). Zavorna sistema: Zavorna sistema v skladu z direktivami EU s sistemom EBS-E (2S2M) brez povezovalnih vodov do vlečne enote. Lakiranje: Odlična in dolgotrajna protikorozijska zaščita standardno peskanega jeklenega okvirja, zagotovljena s 2-komponentno (2K) osnovo z večjo vsebino cinka. Kakovostno 2-komponentno (2K) končno lakiranje v eni barvi, RAL 3002, karminska rdeča. Zadnji del je metaliziran in lakiran v RAL 9010 (čista bela). Metalizirano lakiranje ni mogoče. Jeklena konstrukcija: Jeklena konstrukcija iz visoko trdnih finozrnatih jekel. Vrste jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa). Električna napeljava: Električna napeljava v skladu z direktivami EU, razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX na sprednji priključni plošči z vtičnicami 24N, 24S in 15-polna. Priključek v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098. Vključeno naslednje dodatne opreme: - 2-palčni kraljevi zatič - pocinkana jeklena sprednja plošča, pribl. 400 mm visoka - rumeno-rdeče zračne spojke na pocinkani sprednji priključni plošči - 4 klini z nosilci na sprednji plošči (± 5 kg) - nosilec za rezervno kolo pred sprednjo ploščo - elektro-hidravlična agregat (± 45 kg) - dodatno krmiljenje od spredaj in zadaj s kabelskega daljinskega upravljalnika preko gumbov, z nadzorom enoslednosti osi (brez vgradnje v vlečno enoto) - nosilec na zadnjem delu V-priklopa za aluminijaste rampe Lrsdezqiiaspfx Acaer - evropske odsevne table (rdeče-rumene) na zadnjem delu prikolice - rumen odsevni trak v skladu z direktivami EU na straneh, na raztegljivi platformi in na zadnji strani prikolice - na V-priklopu in zadnji plošči, na levi in desni strani, po en nosilec za opozorilne table, vključno z vtičnico - nosilec za okroglo luč na zadnji strani prikolice - pocinkani zložljivi nosilci pod poševnino platforme - odbijač blata na zadnji strani prikolice - priročnik in opis na USB-pomnilniku - nalepka za omejitev hitrosti 80 km/h na zadnji strani in na obeh straneh - manometer za obremenitev osi, za ugotavljanje obremenitve osi, vključno z diagramom obremenitve.

Stanje: dober (rabljeno), prva registracija: 03/2016, skupna dolžina: 15.450 mm, skupna širina: 2.740 mm, skupna višina: 950 mm, medosna razdalja: 12.660 mm, barva: siv, Leto izdelave: 2016, Lastna teža: 18.900 kg Nosilnost: 78.100 kg Dovoljena skupna masa: 97.000 kg Višina nakladalne površine: 95 cm Raztegljiva nadstavba: Da Tehnično stanje: dobro Vizualno stanje: dobro FYMONVILLE MULTI-Z6L 6 OS SAF 5 HIDRAVLIČNO USMERJENE OSI RADIO DALJINSKI NADZOR VZMETENA NA ZRAK ELEKTRO-HIDRAVLIČNI PAKET VELIKOST PNEVMATIK 245/70 R17.5 RAZTEGLJIVA NAKLADALNA PLATFORMA VELIKOST 1100 CM + 370 CM – RAZTEGLJIVA, SKUPNA DOLŽINA NAKLADALNE PLATFORME 1470 CM ŠIRINA NAKLADALNE PLATFORME 274 CM + 2 X 25 CM – RAZTEGLJIVA NA STRANEH, SKUPNA ŠIRINA NAKLADALNE PLATFORME 320 CM VIŠINA NAKLADALNEGA ROBA 95 CM 2 HIDRAVLIČNI NAKLADALNI PLOŠČI PRIKLJUČKI ZA KAVELJ IN NOSILCI ZA PALETE LED VELIKA OMARICA ZA ORODJE CENTRALNO SISTEM ZA MAZANJE SLLEDITE NAM NA INSTAGRAMU: GEURTSTRUCKS Lsdpfxezpya To Acajrr GOVORIMO NEMŠČINO GOVORIMO ŠPANŠČINO GOVORIMO ANGLEŠČINO

Stanje: novo, največja dovoljena obremenitev: 48.930 kg, skupna masa: 63.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Celotno zalogo vozil, vključno z vozili, ki so na voljo takoj in v kratkem roku, najdete na naši spletni strani. Izvleček iz opreme. Popolna oprema na zahtevo. "Gooseneck" prikolica * s poševnimi robovi spredaj, približno 45° in z zadnjim poševnim robom, približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * trdna lesena obloga, debeline približno 30 mm Tovorilna površina * dvodelna, izpodvlačna izvedba z zadnjim poševnim robom, približno 500 mm x 8° * 5 parov pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 5.000 daN) * 4 pari pritrdilnih obročev, ki se zunanji prepognejo (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščenih ležeče na sprednji strani tovorilne površine (nosilnost 10.000 daN) * 1 vmesna miza, približno 250 mm * izrezi v zunanjem okvirju tovorilne površine za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * trdna lesena obloga, debeline približno 48 mm, nad osmi je valjasta kovinska obloga Osi * osi BPW, hidravlično-mehansko sinhronizirano krmiljenje Lrodpszlwm Aefx Acasr * tehnična nosilnost osi: 12.000 kg na os * zračna vzmetenje z ventili za dvig in spuščanje Pnevmatike * 245/70 R 17.5 3PMSF, indeks obremenitve (146/146 F) * TPMS sistem za nadzor tlaka v pnevmatikah, v skladu s standardom ECE R 141 Opore sedla * JOST opore sedla (mehanske) z dvostopenjsko prestavo za približno 24 t nosilnosti (približno 50 t testna nosilnost) Zavorna naprava * v skladu z direktivami EU z EBS-E (4S3M) Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * vrste jekel: S355J2+N/S355MC (meja tečenja 355 MPa) * S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu z direktivami EU, osvetlitev 24 voltov ASPÖCK-NORDIK (ASS3) * vse LED stranske markerne luči utripajo sinhronizirano s smerniki * ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S & 15-polni priključek, v skladu s standardom ISO. 24N ISO-1185 24S ISO-3731 15-polni ISO-12098 Barvanje * celotna jeklena konstrukcija, po varjenju, avtomatsko peskana z metodo vrtinčenja * drugo peskanje s korundom za optimalno oprijemljivost prevlečnega sistema * HRM-metalizacija celotnega podvozja vozila z ZINACOR 850 (85% cink/15% aluminij) za zagotovitev najboljše zaščite proti koroziji * končna barva z 2 plastma 2K-lak, enobarvno, v RAL 3002 Karminrot, v skladu s sistemom RAL 841GL * platišča v srebrni barvi. Zadnji del je metaliziran in pobarvan v RAL 9010 (čista bela) * metalizirano barvanje ni mogoče * test barvne strukture izveden v testu meglenega spreja s soljo, v skladu s standardom ISO 9227-NSS * zaščita notranjih prostorov s posebnim voskom Vključno z naslednjo dodatno opremo 2-palčni kraljevi vtič * elektro-hidravlična agregat (± 45 kg) * dodatno krmiljenje od spredaj in od zadaj s kablom, upravljanje s pritiskovnimi gumbi, z nadzorom posameznih osi (brez vgradnje v centralno krmilno enoto) * na "gooseneck" prikolici in na zadnji plošči, na levi in desni strani, držalo za opozorilne table, vključno z vtičnico * držalo za okroglo luč na zadnji strani prikolice * na "gooseneck" prikolici aluminijaste stranske stene in zadnja stena, ki se lahko vstavi, približno 2.440 x 400 mm (D x V) * zadnje pocinkane stranske stene se lahko odstranijo. (dolžina nadgradnje, približno 2.560 mm) (± 46 kg) * orodjarna omara, pocinkana, integrirana v poševno "gooseneck" prikolico (± 47 kg) * 4 pari WADER žepov za zabojnike na tovorilni površini za 20', 2x 20', 40' ali 45' zabojnik (± 40 kg) * 7 parov žepov za stranske stene, približno 100 x 50 mm

Stanje: novo, največja dovoljena obremenitev: 33.865 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Izpisek opreme Gooseneck prikolica * s poševnimi robovi spredaj, približno 45° in s poševnim zadnjim delom, približno 750 mm x 10° * 3 pari pritrdilnih obročev (LC 5.000 daN) * trda lesena obloga, debeline približno 30 mm Tovorilna ploščad * v dvojni izvlečni izvedbi s poševnim zadnjim delom, približno 500 mm x 8° * 6 parov pritrdilnih obročev, ki se zlagajo navzven (LC 5.000 daN) * 4 pari pritrdilnih obročev, ki se zlagajo navzven (LC 10.000 daN) * 1 par pritrdilnih obročev, nameščen vodoravno na sprednji strani tovorilne ploščadi (LC 10.000 daN) * 1 vmesna miza, približno 250 mm * trda lesena obloga, debeline približno 48 mm, nad osmijo obloga iz valjane pločevine * izrezi v zunanjem okvirju tovorilne ploščadi za obešanje napenjalnih trakov (LC 2.000 daN) Osi * BPW osi in vzmetenje, vse osi hidro-mehansko sinhronizirane * maksimalna tehnična obremenitev osi: 12.000 kg na os * zračno vzmetenje z ventilom za dvig in spuščanje * orodje za osi Lrjdpfxjzlwm No Acasr Pnevmatike * 245/70 R 17.5, indeks nosilnosti (146/146 F) * proizvajalec po naši izbiri Podporne noge * JOST podpore (mehanske) z dvostopenjskim menjalnikom za približno 24 t dvigalne nosilnosti (približno 50 t preizkusne nosilnosti) Zavorna sistem * v skladu z direktivami EU, z EBS-E (2S2M) brez priključnih kablov do vlečne enote Barvanje * vrhunsko in dolgotrajno protikorozijsko zaščito standardno kroglično peskane jeklene konstrukcije zagotavlja dvokomponentna (2K) temeljno prevleka s cinkovim prahom * vrhunska dvokomponentna (2K) * zaključna barva, enobarvna, v RAL 3002, karminsko rdeča * zadnji del je metaliziran in pobarvan v RAL 9010 (čista bela) * metalizirano barvanje ni mogoče Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * kvalitete jekla: S355J2+N/S355MC (meja tečenja 355 MPa) S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu z direktivami EU * razsvetljava 24 voltov ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX na sprednji priključni letev z vtičnicami 24N, 24S in 15-polno * priključki v skladu s standardom ISO. 24N ISO-1185, 24S ISO-3731, 15-polni ISO-12098 Vključno z naslednjo dodatno opremo * 2 palčni kraljevi člen (King pin) * pocinkana jeklena sprednja stena, približno 400 mm visoka * rumeno-rdeči zračni spojniki na pocinkani sprednji priključni letvi * 4 kosi zavorne podloge z nosilcem na sprednji steni (± 5 kg) * nosilec za rezervno kolo pred sprednjo steno * elektro-hidravlična enota (± 45 kg) * naknadno usmerjanje od spredaj in zadaj s pomočjo kabelskega daljinskega upravljanja, upravljanje z gumbi, z nadzorom osi (brez vgradnje v vlečno enoto) * nosilec na zadnjem delu gooseneck prikolice za aluminijaste nakladalne rampe * evropski reflektorski znaki (rdeče-rumeni) na zadnji strani prikolice * rumeno reflektorsko trakom v skladu z direktivami EU, stransko, na izvlečni strani in na zadnji strani prikolice * na gooseneck prikolici in na zadnji plošči, na levi in desni strani, nosilec za opozorilne table, vključno z vtičnico * priključna letev za aluminijaste nakladalne rampe na zadnji strani vozila * nosilec za okroglo rotacijsko luč na zadnji strani prikolice * pocinkane zložljive podpore pod poševnim delom tovorilne ploščadi * zaščitnik blatnikov na zadnji strani prikolice * navodila in opis na USB-ključu * nalepka za omejitev hitrosti 80 km/h na zadnji in na obeh stranskih straneh * manometer za obremenitev osi za ugotavljanje obremenitve osi, vključno s diagramom obremenitve.

Stanje: novo, največja dovoljena obremenitev: 46.800 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, Na naši spletni strani najdete naš celoten nabor vozil, ki so na voljo takoj ali v kratkem roku. Izbor iz opreme: Celotna oprema na zahtevo. "Labodje vrat": * "Labodje vrat" s poševnimi robovi spredaj, približno 45° in z zadnjo poševnostjo približno 750 mm x 10° * 3 pari pritrdilnih obročev (nosilnost 5.000 daN) * Prevleka iz trdega lesa, debeline približno 30 mm Nosilna plošča, raztegljiva različica: * z zadnjo poševnostjo približno 1.000 mm x 8° * 5 parov pritrdilnih obročev, z zunanjim mehanizmom za zlaganje (nosilnost 5.000 daN) * 3 pari pritrdilnih obročev, z zunanjim mehanizmom za zlaganje (nosilnost 10.000 daN) * 1 par pritrdilnih obročev, nameščen vodoravno spredaj na nosilni plošči (nosilnost 10.000 daN) * Vrezanine v zunanjem okvirju nosilne plošči za pritrditev zategovalnih trakov (nosilnost 2.000 daN) * Prevleka iz trdega lesa, debeline približno 48 mm, nad osmi protizdrsna prevleka. Lredjzk S Dmopfx Acaer Osi: * Osi in vzmetenje BPW * Prva os je fiksna, vse ostale osi pa so hidravlično-mehansko sinhronizirane * Tehnična obremenitev osi: 12.000 kg na os * Zračno vzmetenje z ventilom za dvigovanje in spuščanje * Orodje za osi * Pnevmatike * 245/70 R 17.5 3PMSF * Indeks obremenitve (146/146 F) * TPMS: Sistem za nadzor tlaka v pnevmatikah, v skladu s standardom ECE R 141 Podporne noge * Podporne noge JOST (mehanske) z 2-stopenjsko prestavo za približno 24 t dvigalne nosilnosti (približno 50 t preizkusne nosilnosti) Zavorna naprava * v skladu s predpisi EU z EBS-E (4S3M) Barvanje * Celotna jeklena konstrukcija, avtomatsko obdelana s peščanjem po varjenju * Drugo peskanje s korundom za optimalno oprijemljivost prevlečnega sistema * HRM-metalizacija celotnega šasije vozila s pomočjo ZINACOR 850 (85 % cink/15 % aluminij) za zagotavljanje najboljše korozijske zaščite * Končno barvanje z 2 plastmi 2K lakom * enobarvno, v barvi RAL 3002 Karminrot, v skladu s sistemom RAL 841GL * Platišča v srebrnosivi barvi. Zadnji del metaliziran in pobarvan v barvi RAL 9010 (čista bela) * Metalizirano barvanje ni mogoče * Barvna prevleka preizkušena s testom solne megale v skladu s standardom ISO 9227-NSS * Zapiranje votlin s specialnim voskom Jeklena konstrukcija * iz visoko trdnih finozrnatih jekel * Kakovost jekla: S355J2+N/S355MC (meja tečenja 355 MPa), S690QL/S700MC (meja tečenja 690 MPa) Električni sistem * v skladu s predpisi EU Osvetlitev * 24 Volt ASPÖCK-NORDIK (ASS3) * Vse LED stranske gabaritne luči utripajo skupaj s smerokazom * ASPÖCK-UNIBOX na priključni letev spredaj s vtičnicami 24N, 24S & 15 polna * Priključek v skladu z ISO. 24N ISO-1185 24S ISO-3731 15 polna ISO-12098 Vključno z naslednjo dodatno opremo: * 2-palčni kraljevi priklop * Pocinkana jeklena sprednja stena, približno 400 mm visoka * Elektro-hidravlična agregat (± 45 kg) * Pomik sprednje in zadnje osi s kabelskim daljinskim upravljanjem preko tipk, z nadzorom ene osi (brez vgradnje v centralno mazalno enoto) * 1 par potopljenih pritrdilnih obročev vzdolž centralnega nosilca zadaj v poševnem delu (nosilnost 10.000 daN) (± 3 kg) * Na "labodjem vratu" aluminijaste bočne stene in zadnja stena, vstavljivi, približno 2.440 x 400 mm (D x V) * Zadnje pocinkane vstavne ograje je mogoče odstraniti. (dolžina nadgradnje približno 2.560 mm) (± 46 kg) * Orodje, galvanizirano, integrirano v poševni del "labodjega vrata" (± 47 kg) * 3 pari WADER žeepov za kontejnerje na nosilni plošči za 20' (30?) ali 40'? kontejner (± 30 kg) * 6 parov žeepov za vstavne ograje, približno 100 x 50 mm, v zunanjem okvi

Stanje: novo, največja dovoljena obremenitev: 36.020 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles available for immediate or short-term delivery on our website. Partial equipment listing. Full equipment details available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of outward folding lashing rings (LC 5,000 daN) * 3 pairs of outward folding lashing rings (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, with checker plate covering over the axles Two-part steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 2.8 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding ramp sections and hydraulic lifting mechanism * Maximum load per pair: 30,000 kg Landing legs: * JOST landing gears (manual) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Ljdsy Auhuspfx Acajrr Axles: * BPW axles and suspension, 2 rigid axles, 1 self-steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, can be activated via reverse gear and manually * Air suspension with raise and lower valve Tyres: * 235/75 R 17.5 3PMSF tyres – manufacturer at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations with EBS-E (2S2M) without connectors to the tractor unit Steel structure: * Steel construction made from high-tensile fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations, LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connector strip with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metalizing of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimal corrosion protection * Final coating with 2 layers of two-component topcoat, single colour in RAL 3002 carmine red, in accordance with RAL System 841GL * Rear section metalized and painted RAL 9010 (Pure White) * Wheels in silver Including accessories: * One bracket for warning signs on both sides at the gooseneck and at the rear, including socket * 1 spare wheel holder under the loading area on the right-hand side * 2" kingpin * Galvanized steel front wall * Yellow-red air couplings on the galvanized connector strip at the front * 4 wheel chocks with holders on the front wall * 3 height-adjustable wooden planks * Galvanized folding supports under the loading area bevel * Bracket for a rotating beacon at the rear of the trailer * Height-adjustable tarpaulin frame (approx. 3,960 mm) * Galvanized front wall with tensioning mechanism for sliding curtains, height-adjustable by approx. 400 mm * EDSCHA roof, forward-sliding, on aluminium roof beam profiles (bolted with front and rear wall) * 3 pairs of sliding stakes in the loading area * Superstructure can be hydraulically widened at the rear to left and right by approx. 750 mm * Sliding roof with liftable portal carrier * Sliding tarpaulin with approx. 700 mm slack in length, with tensioning straps spaced approx. 600 mm

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full stock of immediately and soon-available vehicles on our website. Selected features listed below. Complete specification available upon request. Gooseneck: * Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN). Hardwood flooring approx. 30 mm thick Load area: * Load area hydraulically raisable and lowerable after the gooseneck, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * 1 pair of inward-folding lashing rings on the front central beam (LC 10,000 daN) * Cutouts in the external frame of the loading area for attaching tensioning straps (LC 2,000 daN) * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), checkered plate surface above the axles Two-part steel ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating surface C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections. Hydraulic lifting system, hydraulically extendable * Maximum load capacity per pair: approx. 40,000 kg Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lockout, activated by reverse gear and manually * Air suspension with lift and lower valve Brake system: * WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Tyres: * 235/75 R 17.5 3PMSF – Brand of our choice TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for optimal corrosion protection * Final coating with two layers of 2K topcoat, single color in RAL 3002 Carmine Red according to RAL system 841GL * Wheels in silver-grey Included equipment: * 2" kingpin * One galvanized steel front wall, approx. 400 mm high Lrsdpfeyhkqzex Acaer * Grating surface in the gooseneck’s chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating surface in the load area’s chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Sand coating applied as slip protection to the checkered plates above the kingpin and loading area * Electro-hydraulic power unit under the rear of the load area * On the gooseneck: removable aluminum side and rear walls, approx. 2,440 x 400 mm (L x H). The galvanized rear stakes are removable. (Body length approx. 2,560 mm) * One electric cable winch with radio remote control, approx. 5,400 kg line pull, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for guiding the winch cable on the neck without a deflection roller * One galvanized toolbox integrated into the chamfered gooseneck, with opening for winch * Grating surface on gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for approx. 100 x 50 mm slip-in stakes in the outer frame of the loading area * Lift axle on the front axle, controlled by TEBS E depending on current axle load and loading condition * 7 pairs of... [Text truncated - please provide remaining content for further translation if needed.]

Stanje: novo, največja dovoljena obremenitev: 38.140 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full range of immediately and short-term available vehicles on our website. Excerpt from the equipment. Full equipment list available on request. Gooseneck: - Gooseneck with approx. 45° chamfered front corners and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Approx. 30 mm thick hardwood flooring Loading platform: - Telescopic loading platform with rear slope approx. 1,000 mm x 8° - Between the 1st and 2nd axle, a pair of fixed integrated wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece, removable, galvanized cover over the wheel recesses (W approx. 670 mm – max. point load 5 t / each) - 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) - 4 pairs of folding external lashing rings (LC 5,000 daN) - 3 pairs of folding external lashing rings (LC 10,000 daN) - Cutouts in the outer frame of the loading platform for securing straps (LC 2,000 daN) Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - 235/75 R17.5 3PMSF tyres, manufacturer of our choice - TPMS – Tire Pressure Monitoring System according to ECE R 141 - Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992 - The tractor unit must be capable of transmitting and displaying these data for correct indication. Axles: - BPW axles and suspension, 2 axles fixed, 3rd axle trailing steer - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve. Axle tools Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M), without connecting lines to the tractor Electrical system: - Electrical system in accordance with EU regulations - LED lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicators - ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel construction: - Steel construction made from high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with shot-blast machine after welding Ljdew Tpq Dopfx Acaerr - Second blasting with corundum for optimal coating adhesion - HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% Zinc / 15% Aluminum) to ensure best corrosion protection - Final coating with 2 layers of 2K top coat, single color RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible - Paint system tested in salt spray test according to ISO 9227-NSS - Cavities sealed with special wax Including the following accessories: - On both the gooseneck and at the rear left and right, one holder for warning boards, including socket - Spare wheel holder in front of the bulkhead (without spare wheel) - 2" king pin - One galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings at the galvanized connection panel at the front - Galvanized folding supports under the rear slope of the loading platform - Hardwood rear impact protection from gooseneck rear wall to loading platform - 1 pair of recessed lashing rings along the central frame at the rear in the slope (LC 10,000 daN) - On the gooseneck, aluminum side and rear walls

Stanje: novo, največja dovoljena obremenitev: 47.300 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 8.600 mm, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: * Gooseneck with chamfered front corners approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area in extendable design with rear chamfer approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) * Recesses in the outer frame of the loading area for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate flooring above the axles Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Tyres: * Tyres 235/75 R 17.5 3PMSF, manufacturer of our choice Axles: * BPW axles, two rigid axles, two self-tracking axles, air suspension, drum brake, with lifting/lowering function * The self-tracking axles can be locked for reversing by electro-magnetic reverse lock via reverse gear or manually * Axle tools Brake system: * WABCO brake system in compliance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Lodpfoyvnfgjx Acaorr Paintwork: * Premium and durable corrosion protection for the standard shot-blasted welded frame ensured by a two-component (2K) zinc dust primer * High-quality two-component (2K) topcoat, single colour, RAL 3002 Carmine Red * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver Accessories: * Spare wheel holder in front of the front wall (without spare wheel) * 2-inch king pin * Galvanised steel front wall approx. 400 mm high * Yellow-red air couplings on the galvanised connection strip at the front * Mount in the rear area of the gooseneck for ALU loading ramps * Galvanised folding supports under the rear chamfer of the loading area * Holder for a beacon at the rear of the trailer * On the gooseneck and at the rear end panel, left and right, holders for warning signs including socket * TPMS tyre pressure monitoring system according to ECE R 141 * On the gooseneck, plug-in aluminium side walls and tailgate, approx. 2,440 x 400 mm (L x H). The rear galvanised plug-in stanchions are removable. (Body length approx. 2,560 mm) * Galvanised toolbox integrated into the chamfered gooseneck * 3 pairs of WADER container pockets recesses in the loading area for a 20' (30') or 40' container * Sliding hooks for aluminium loading ramps at the rear of the vehicle * 6 pairs of stanchion pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the loading area * Galvanised extensions, extendable by approx. 230 mm per side * Lift axle on the front axle with control via TEBS E depending on the current axle load and current loading status * 2 LED reversing lights mounted on the rear end panel * 2 pairs Ferry-

Stanje: novo, največja dovoljena obremenitev: 37.075 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our full selection of vehicles available for immediate or short-term delivery on our website. Extract from the equipment list. Complete equipment details available on request. Gooseneck: * Gooseneck with beveled corners at the front approx. 45°, and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading Platform: * Platform behind the gooseneck hydraulically liftable and lowerable, length approx. 2,800 mm, with rear chamfer approx. 1,000 mm x 8° * 6 pairs of lashing rings, foldable outward (LC 5,000 daN) * 2 pairs of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, foldable inward at the central beam front (LC 10,000 daN) * Cutouts in the outer frame of the platform for attaching tension belts (LC 2,000 daN) * Grating floor C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm), over axles with checker plate covering Two-part Steel Ramps: * One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm with grating floor C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm) * Ramp with hydraulically folding and unfolding ramp segments * Hydraulic lifting device, hydraulically movable * Maximum load per pair: approx. 40,000 kg Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated by reversing gear or manually * Air suspension with lift and lower valve Braking System: * WABCO braking system in accordance with EU regulations with EBS-E (2S2M) Tyres: * Tyres 235/75 R 17.5 3PMSF. Brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Paintwork: Lrsdpfx Asyhkrrjcajr * HRM metallization of the complete vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final paintwork with 2 coats of 2-component topcoat, solid color in RAL 3002 Carmine Red, according to RAL system 841GL * Rims in silver grey Included Accessories: * 2-inch kingpin * One galvanized steel front bulkhead, approx. 400 mm high * Grating floor on gooseneck chamfer C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * Grating floor on platform chamfer C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm) * Electric-hydraulic power pack underneath the rear of the platform * On the gooseneck, aluminum side panels and rear panel, plug-in, approx. 2,440 x 400 mm (L x H). The rear galvanized stanchions are removable. (Superstructure length approx. 2,560 mm) * One electric winch with radio remote control, approx. 5,400 kg pulling capacity, incl. approx. 9.5 mm steel cable, approx. 24 m long, with cable guide roller * Bolted 5 t ring for anchoring winch cable on the gooseneck without pulley * One galvanized toolbox, integrated in the beveled gooseneck with an opening for winch passage * Grating floor on the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm) * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm on the outer frame of the platform * Lift axle on the front axle with TEBS E control based on current axle load and loading status * 7 pairs of recessed lashing rings along the central beam (LC 5,000 daN): 2 pairs in the lift bed, 5 pairs in the rear section of the platform

Stanje: novo, največja dovoljena obremenitev: 34.104 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Further details here: Lrjdpfx Asv D Abgjcaer

Stanje: rabljeno, lastna masa: 14.100 kg, največja dovoljena obremenitev: 33.900 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, prva registracija: 11/1999, vzmetenje: zrak, velikost pnevmatike: 235/75 17,5, stanje pnevmatik: 50 odstotek, barva: zelen, Leto izdelave: 1999, velikost sprednje pnevmatike: 235/75 17,5, velikost zadnje pnevmatike: 235/75 17,5, voznikova kabina: dnevna kabina, emisijski razred: noben, Oprema: registracija tovornjaka, Reference number for inquiries: 68574 Faymonville, Platform trailer * Year of manufacture: 1999 * Air suspension * Steering axle * Forced steering axle * Air supply coupling heads (red + yellow) * Connection plug: 2x 7-pin * Lifting and lowering device * Telescopic – extendable semi-trailer * Suspension: air * Gross vehicle weight: 48,000 kg * Unladen weight: 14,100 kg * Payload: 33,900 kg * Permissible total weight: 48,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 2nd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire condition 3rd axle: 50% -- 50% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 Ljdeyib Ahepfx Acaorr * Superstructure manufacturer: ES-GE * Extension defective * Steering axles inoperative * Mobile/rollable Liability disclaimer: Subject to alterations, prior sale, and errors excepted. Find more photos and videos on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, uncomplicated financing solutions * Handling of all (export) documentation * Ordering export or customs license plates * Vehicle preparation: new tarpaulins, signage, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transport of commercial vehicles Please contact our trained specialist staff—we are happy to assist you.

Stanje: novo, največja dovoljena obremenitev: 36.410 kg, skupna masa: 48.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, Our complete vehicle inventory, including vehicles available immediately or at short notice, can be found on our website. Excerpt from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design to optimize load bed length, approx. 3,700 mm long, with rear taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front bulkhead, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electric-hydraulic unit for hydraulic operations, excluding hydraulic winches * Approx. 40 mm thick hardwood cover above the gooseneck * 2-inch kingpin * Guide plate from the gooseneck for the fifth-wheel plate, approx. 500 mm wide * Receptacle at the rear of the gooseneck for aluminum drive-on ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the bulkhead * 1 pair of stake pockets embedded in the gooseneck, for plug-in stakes approx. 100 x 50 mm (inner chassis rail) EQUIPMENT: * Load bed approx. 8,800 mm long, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° * Recess in the load bed including the rear slope to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, with protected supply lines inside the extendable beams, automatically adapting to the respective load bed length * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, 1st and 2nd axle rigid, 3rd axle steering-following * 3rd axle with electromagnetic reverse lock, activating via reverse gear or manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires. Make at our discretion * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous and between-axle interrupted approx. 50 mm hardwood planking on load bed (increasing coefficient of friction) * 1 cross table, approx. 300 mm wide, for the extendable tube with large cross-section; cross table with offset load bed and extendable mounting rails for aluminum bridging elements Lodoy Auh Ijpfx Acasrr * Load bed locking with conically welded locking profiles every approx. 250 mm, including pretensioning plate * 1 pair of lashing rings on front crossbeam (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the load bed, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck crossbeam, approx. 700 x 410 mm (W x D) * Wheel recesses with approx. 15 x 15 mm square climbing strips and widened sections at the lower area (if vehicle is fitted with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the load bed between 1st and 2nd axle * Wheel recesses with approx. 15 x 15 mm square climbing strips and widenings in lower area * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, can also be used as widening planks (if vehicle is fitted with extendable widenings) * Aluminum elements lockable on the extension beams of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasted and painted in single color according to RAL code

Stanje: novo, največja dovoljena obremenitev: 67.200 kg, skupna masa: 85.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete inventory of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment features. Full equipment details upon request. GOOSENECK * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm long, with a rear chamfer approx. 1,000 mm x 10° * For tractor units: 6x2, 6x4, and short 8x4 * Plug-in steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, excluding hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in ALU sideboards, approx. 400 mm high, anodized finish * One plug-in ALU rearboard, approx. 400 mm high, anodized finish Lrodpforgzv Nox Acasr * Approx. 40 mm thick hardwood flooring above the gooseneck, checker plate flooring above the king pin * 3.5 inch king pin * Guide plate on the gooseneck for the fifth wheel plate, approx. 500 mm wide * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow control, incl. bracket for suspension of supply lines (Faymonville couplings) * 2 pairs of stake pockets sunk into the gooseneck, for plug-in stakes approx. 100 x 50 mm LOADING DECK * Extendable loading deck, length approx. 11,000 mm, rear chamfer approx. 500 mm x 10° * Pneumatic locking with conical locking bolt and reinforced lock positions, supply lines are routed protected in the extendable beams and automatically adjust to the respective platform length * BPW axles and suspension, 1st axle steerable, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve * Tyres: 235/75 R 17.5 3PMSF, twin tyres * Mechanical landing gear with 2-speed gearbox and crank. JOST Modul B - static test load = approx. 50,000 kg * Continuous 50 mm thick hardwood flooring on the loading deck, interrupted between the axles (increases coefficient of friction) * Slotted holes for attachable and re-positionable bridging elements: - on the fixed section behind the gooseneck - at the front of the loading area * 1 sliding intermediate table, approx. 500 mm wide, for the extension tube with large cross-section, with checker plate flooring, slotted holes front and rear for attachable and repositionable bridging elements * 1 pair of recessed horizontal lashing rings at the front of the fixed platform section (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the deck, fold-out to the outside (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering operated from both front and rear via cable remote control, with axle tracking control, no installation in the tractor unit * 1st axle with automatic lift-axle function and start-up aid according to EU Directive 2021/535 * Under the gooseneck and on the rear cross member, one 7-pin socket each on left and right, with bracket for warning signs * Painted sand coating on the outer frame of the platform as well as on the checker plates of the platform and in the transition area between the loading deck

Stanje: novo, največja dovoljena obremenitev: 43.929 kg, skupna masa: 58.000 kg, konfiguracija osi: 3 osi, dolžina tovornega prostora: 16.690 mm, širina tovornega prostora: 2.550 mm, skupna širina: 2.550 mm, skupna višina: 3.570 mm, Leto izdelave: 2026, Oprema: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader Extendable with Wheel Wells (NEW) Equipment & Highlights Technology & Superstructure Extendable low loader with wheel wells * External length: 13,190 mm; platform: 9,240 mm + 3,500 mm extension * Platform height: only 875 mm for low loading height * Overall width: 2,550 mm + 600 mm extension * Unladen weight: approx. 14,071 kg * Perm. total weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles 4 BPW axles, front 2 fixed, rear 2 trailing axles * Lift axle (automatic + manual) * Air suspension with load gauge * WABCO EBS 4S/3M, ABS & RSS * WABCO Smartboard (axle load, suspension, diagnostics) * 16x tyres 245/70 R17.5 (M+S + 3PMSF) * Tyre pressure monitoring according to R141 Ramps & Loading Area Lrsdox Efznjpfx Acaer Foldable 40-ton ramps * Ramp length 2,750 mm, 850 mm width * Hydraulic sliding system * 45 mm hardwood floor + steel chequer plate over wheel arches * Wheel wells + cover plates included * Excavator arm recess at rear Load Securing Comprehensive lash points: * 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck * 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform * 8,000–10,000 daN on outer frame / well area * 5×2 stake pockets, removable stakes 50×100 mm * Container locks for 1×20 ft or 1×30 ft Equipment & Comfort 1× Toolbox (700×400×360 mm) * Stake box * Beacon * LED side lighting, LED work lights * Wheel chocks * Extension boards with LED * Standard 2" kingpin * Metallized chassis (Zn/Al 85/15) – high corrosion protection * Colour: RAL 9005 Black Special Features New & immediately available * High payload, extremely versatile * Perfect for machinery transport, construction equipment, vehicles, etc. * Very robust construction, premium BPW components We are happy to provide further information upon request.