Polpriklopnik z nizko nakladalno ploščadjo

FAYMONVILLE MAX510-Z-2-ATX-A-6.85

Stanje: novo, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, Leto izdelave: 2026, Technical Data MAX510-Z-2H-ATX-A-6.85-PA Speed: 80 km/h Gross weight: 47,000 kg Fifth wheel load: 23,000 kg Axle load: 24,000 kg Gooseneck length: 3,750 mm Loaded coupling height: 1,200 mm Rear swing radius: 2,300 mm Loading platform length: 6,850 mm Extendable by: 5,500 mm Loading height at max. load: 350 mm Chassis length: 2,600 mm Chassis rear loading height at max. load approx.: 1,005 mm Suspension travel: -150/+450 mm Axle spacing: 1,360 mm Overall width: 2,540 mm Gross weight depends on fifth wheel load. Low-bed: Low-bed with external beams, extendable version "SUPER LOW" design, length approx. 6,850 mm. Low-bed with fixed hardwood floor approx. 40 mm thick and mechanical locking device. Supply lines are routed safely within the extendable beams and automatically adjust to the respective low-bed length. 5 pairs of folding external lashing rings (LC 10,000 daN). 6 pairs of threaded blocks on the inner beam for mounting screwable RUD rings. Rear chassis: Rear chassis with closed outer frame, checker plate covering, and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear. 2 pairs of folding external lashing rings (LC 10,000 daN). 1 pair of flat lashing rings in trough (LC 8,000 daN+5,300 daN). 2 pairs of stake pockets for 100 x 50 mm plug-in uprights in outer frame Gooseneck: Gooseneck in SNT design for maximizing loading area length, length approx. 3,785 mm. Gooseneck hydraulically lift/lower and detachable. Technical fifth wheel load: 23,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 Fedpfx Aboizu Nwjvspd PENDLE AXLE: "PENDLE-AXLE", all axles hydro-mechanically forced steered. Burst protection valve on axle compensation cylinder with automatic RESET function. Hydraulic cylinders with shut-off valves and locking pin for securing in lifted position. Axles finished in 2 layers of single-color 2K paint (FAY-Gray-34-0260). Technical axle load: 12,000 kg Hydraulic axle compensation. Axle tools. Brake system: Brake system according to EU regulations with EBS-E (2S2M), without connection lines to the tractor. Electrical system: Electrical system according to EU regulations, 24 Volt lighting ASPÖCK-NORDIK (ASS3), ASPÖCK-UNIBOX at the front connection panel with 24N, 24S, and 15-pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098. Steel construction: Steel structure made of high-strength fine-grained steel. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, single-color in RAL shades of choice. Rear section metallized and painted in RAL 9010 (pure white). No metallic paint available. Tyres: 245/70 R 17.5 3PMSF tyres, brand at manufacturer’s discretion. Load index (146/146F) Prepared to accommodate bolted container positioning devices for 1x 20' or 1x 40' container on the outer beams. Without container locks. - 2” king pin - Galvanized steel headboard, approx. 400 mm high - One spare wheel with holder in front of the headboard - Two wheel chocks with holder on the headboard - At the galvanized front connection panel, yellow-red air couplings - Steering from front and rear via remote cable control with push buttons, including single-track axle control (without installation on the tractor unit) Hydraulic connections from gooseneck to low-bed

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1997, Sheet width: 3230 mm Sheet thickness: 2.5 mm Sheet thickness (stainless steel): 1.5 mm Strokes: 28 - 42 strokes/min Cutting angle: 1.60 degrees Table height: 820 mm Distance between uprights: 3540 mm Control: ELGO 87P Motor power: 6.8 kW Machine weight: approx. 3410 kg Dimensions (LxWxH): 4070 x 2070 x 1400 mm From a maintenance workshop Including special accessories (!!) Features: - Heavy-duty, motorized swing-beam guillotine shear - Break-proof, torsion-resistant steel weldment construction - Compact and clearly laid out machine design - NC electro-motorized back gauge - Including NC ELGO "Type 87P" digital control unit * Adjustable from the front right * Actual/target value position input * Stepless adjustment through entire travel range Fedpexacd Nefx Abvopd * Coarse adjustment via push buttons * Limit protection by end stops - "Duo-Cut" drive with two dynamic, high-performance gear motors - Support table with handgrips - Hold-down beam with hard rubber strip - Fully steel, double-edged blade - Selector switch for single and continuous stroke - 1x free-moving foot switch - Rear safety device - Original operating manual Special accessories included: - Pneumatic sheet support device for thin sheet cutting - 1x extra-long side stop, including support foot and digital stop - 2x extra-long, front support arms * With "SLIDING" mounting – for easy shifting

Stanje: zelo dobro (rabljeno), konfiguracija osi: 2 osi, prva registracija: 06/2015, dolžina tovornega prostora: 6.100 mm, širina tovornega prostora: 2.540 mm, vzmetenje: zrak, velikost pnevmatike: 235/75/17.5, barva: rdeča, Leto izdelave: 2015, Oprema: ABS, = Dodatne opcije i oprema = - Vazdušno oslanjanje = Dodatne informacije = Konfiguracija osovina Dimenzije guma: 235/75/17.5 Marka osovina: SAF Kočnice: Bubanj kočnice Oslanjanje: Vazdušno oslanjanje Zadnja osovina 1: Duple gume; Maks. dozvoljeno opterećenje: 10.000 kg; Upravljiva Zadnja osovina 2: Duple gume; Maks. dozvoljeno opterećenje: 10.000 kg; Upravljiva Težine Prazna masa: 9.900 kg Nosivost: 35.100 kg Dozvoljena ukupna težina: 45.000 kg Funkcionalno Visina tovarne platforme: 55 cm Platforma na izvlačenje: Da Stanje Fpedpfx Abjw Dqvwsvod Tehničko stanje: veoma dobro Vizuelno stanje: veoma dobro FAYMONVILLE MEGAMAX F-S42-1ACA NISKONOSEĆI POLUPRIKOLICA SA 2 OSOVINE SAF osovine Vazdušno oslanjanje 1. i 2. osovina su upravljačke Nosivost 35,1 tona WABCO EBS-E Dužina tovarne platforme 610 cm + izvlačivo 250 cm Širina tovarne platforme 254 cm Debljina platforme 20 cm Visina platforme +/- 55 cm Izliv za stilski most bagera: dužina 315 cm, širina 75 cm, dubina 28 cm Bočni reflektori pozadi Mesta za učvršćivanje tereta na platformi Kutija za alat Povratno točak 4 x klin za točak

Stanje: novo, največja dovoljena obremenitev: 33.750 kg, skupna masa: 47.000 kg, konfiguracija osi: 2 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our full inventory of immediately and short-notice available vehicles on our website. Excerpt from the equipment list. Complete equipment details available upon request. Gooseneck: - Gooseneck in SNT design for optimized loading deck length, approx. 3,750 mm - Gooseneck hydraulically lift/lower and detachable - Technical fifth-wheel load: 23,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed: - Low bed with external beams, extendable SUPER LOW design, approx. length 6,850 mm - Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking - Supply lines protected within the extendable beams, automatically adjusting to bed length - 5 pairs of lashing rings, outward folding (LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for screw-mounted RUD rings Rear undercarriage: - Rear chassis with closed outer frame, checker plate surface, continuous prism excavator recess, approx. 1,250/700 x 505 mm, open at the rear - 2 pairs of lashing rings, outward folding (LC 10,000 daN) - 1 pair of flat lashing rings in the recess LC 16,000 daN - 1 pair of flat lashing rings in the recess LC 10,600 daN - 2 pairs of stake pockets for removable stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced steering - Burst protection valve on axle compensation cylinder with automatic RESET function - Hydraulic cylinders with shut-off valves and locking pins for secure positioning when raised - Final painting of axles with 2 coats of 2-component paint, single color in FAY grey 34-0260 - Technical axle load: 12,000 kg each, hydraulic axle compensation - Axle tools - Tyres: 245/70 R 17.5 3PMSF – manufacturer at our discretion, load index (146/146F) TPMS: - TPMS tire pressure monitoring system according to ECE R 141 Fpodpfx Ajxbmn Ujbvjd Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Electrical system: - Electrical system according to EU regulations, 24V ASPÖCK-NORDIK (ASS3) lighting - All LED side marker lights flash with indicator - ASPÖCK-UNIBOX on the front terminal strip with 24N, 24S & 15-pin sockets. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel construction made of high-strength fine-grained steel - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: - Complete steel structure automatically shot-blasted with a blast wheel system after welding - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire chassis using ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Final coating with two layers of 2K top coat, single color in RAL 3002 carmine red, in accordance with RAL system 841GL Including the following additional features: - 2-inch kingpin - One galvanized steel front wall, approx. 400 mm high - Rear and front axle steering via cable remote control with push buttons and single track control of axles (without installation in tractor unit) - Electro-hydraulic unit - 2 pairs of bolted container locks on the outer beams. Including 2 pairs of container fastenings for 1x 20' or 1x 40' container - On the gooseneck, plug-in aluminum side boards and rear wall, approx. 2,440 x 400 mm (L x H) - The rear galvanized plug-in stakes are removable