Hladilnik Za Ledeno Vodo nakup rabljenega (83.920)

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Pgedpfx Aet Hw D Roh Uel Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. Total power requirement 20 kW Machine weight approx. 6 t Space required approx. m CNC-controlled horizontal gear hobbing machine with workpiece gantry loading device Type A 35 / 36 CNC, year of manufacture 1992 Workpiece Ø / wheel diameter with automatic loading max. 150 mm Workpiece Ø with manual loading max. 200 mm Max. workpiece length approx. 400 mm Milling length, axial (Z-axis) 300 mm Module range HSS/Carbide cutter 3 / 4.5 mm Number of teeth min./max. 2-999 Center distance tool-workpiece min./max. 0 - 190 mm Workpiece rotational speed max. 0-350 rpm Milling slide swivels left/right 50 / 60 ° Pgedpst Hwxbjfx Ah Ujl Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y-axis) 100 mm Radial slide travel max. (X-axis) 10-150 mm Tailstock travel max. (W-axis) 420 mm Cutter rotation speeds continuously adjustable 0 - 1,500 rpm Feed range all axes, steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total drive approx. 20 kW - 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special equipment: MIKRON CNC control type 788- (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with dialog programming for the creation of various gearing cycles such as helical gear cutting, worm and worm wheel hobbing, crown gearing, with and without shifting, as well as further subprograms. Heavy-duty shifting milling head with high cutter speeds and long shift travel, also for 2 cutters, with quick-change system and hydraulic counter bearing Workpiece headstock (C) with quick-change system (collet) Heavy-duty tailstock with traverse 420 mm (W), in conjunction with an automatic workpiece loading device make GÜDEL-Switzerland with linear gantry loader approx. 1000 mm stroke (V), double pivot gripper for loading and unloading shaft-type workpieces (currently approx. 60 mm long x 25 mm Ø x module 1.5 mm), but without workpiece unloading device. Separate coolant unit with magnetic chip conveyor Full enclosure with sliding doors 2 machines with workpiece marking unit from BORRIES, unfortunately, no other accessories

Leto izdelave: 1963, stanje: rabljeno, številka stroja/vozila: 18135, Broaching machine - horizontal Manufacturer: Forst Model: RIW 100/2200 Tensile force: 100 tonnes Stroke: 2,200 mm Crane available separately under listing Y941 Pgedpfx Ahsbrcy No Uel

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1987, Usata Giddings & Lewis Modello MC 50 Twin Pallet Centro di Lavoro Orizzontale con Mandrino Motorizzato, Cambio Utensili Automatico a 60 posizioni e Controllo G&L 8000A. Numero di serie: 445-1052. Anno di costruzione: 1987. Macchina precedentemente installata presso Rolls Royce Plc a Derby, Regno Unito. Disponibile immediatamente per la vendita e attualmente situata in Belgio, dove è possibile visionarla. Pgjdpeu Dahnofx Ah Uol Diametro mandrino – 130 mm Cono mandrino – ISO 50 Corsa mandrino (asse Z) – 915 mm Velocità mandrino (4 gamme) – 5 a 1500 giri/min Motore principale – 30 HP Dimensioni pallet – 1219 x 1245 mm Rotazione pallet – incrementi di 0,001°, 360.000 posizioni Portata massima pallet con cambiopallet – 5.000 kg Portata massima pallet senza APC – 9.000 kg Corsa longitudinale (W) – 1.700 mm Corsa verticale testa (Y) – 1.500 mm Corsa trasversale (X) – 1.800 mm Avanzamenti – da 1 mm/min fino a rapido Avanzamento rapido (X e Y) – 4.500 mm/min Avanzamento rapido (Z e W) – 3.000 mm/min Cambio utensili automatico – 60 posizioni Alimentazione elettrica – 415V, 3Ph, 50Hz CARATTERISTICHE E DOTAZIONI Refrigerazione interna ad alta pressione (25 Bar) attraverso il mandrino, macchina di alta precisione. Macchina precisa, ben mantenuta e regolarmente calibrata dal costruttore. Sonda di misura Renishaw. Dimensioni: Lunghezza – 11.679 mm, Larghezza – 6.502 mm, Altezza – 4.423 mm Peso – 40.329 kg

Leto izdelave: 1990, stanje: pripravljen za uporabo (rabljen), Used for horizontal wrapping of profiles, includes control cabinet with main switch for the system, infeed roller conveyor with movable side stop, pneumatically operated lifting device, control panel with emergency stop button, wrapping unit with height adjustment, outfeed roller conveyor. Connected load: 2.5 kW, length: 16,060 mm, width: 2,485 mm, height: 1,900 mm. Supplied with documentation, on-site inspection possible. Pgodowbpy Njpfx Ah Usl

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, With documentation and some accessories. An on-site inspection is possible, but not under power. Pjdpfx Ajrl Rbvoh Uogl

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: HAAS Pgedpfx Aex H Uz Ajh Uel Ta 3-osni horizontalni stružni stroj HAAS ST-30 je bil izdelan leta 2011. Opremljen je z 10" vpenjalno glavo, 3400 obr/min vretenom, podprto z gnanimi orodji z osjo C, merilnikom orodja in transporterjem. Vključuje tudi revolversko glavo 12 x VDI40 in konjiček. Če iščete visokokakovostne zmogljivosti struženja, razmislite o HAAS ST-30, ki je na voljo pri nas. Za dodatne informacije nas kontaktirajte. Vrste uporabe Struženje

Stanje: rabljeno, Horizontalna vrtalno-rezilna stroj CORNAC C100 Pgedpfx Ahsxu Ifhe Uol Pomik X: 1000 mm Pomik Y: 1000 mm Pomik Z: 1260 mm Fiksna miza Stožec: SA 50 Vreteno: Ø 100 mm Izhod vretena: 550 mm Število vrtljajev: od 10 do 1250 min⁻¹ Dimenzije mize: 1550 x 980 mm Obdelovalna plošča: Ø 520 mm Motor vretena: 9,5 kW Merilni sistem 3 osi HEIDENHAIN Samodejni pomiki: X - Y - Z Priložen komplet stožcev Napetost: 380 V Dimenzije (D x Š x V): 4500 x 2100 x 2450 mm Teža: pribl. 8 T

Stanje: rabljeno, Leto izdelave: 2000, Dolžina brušenja 600 mm Širina brušenja 300 mm Magnetna vpenjalna plošča 600x200 mm Premer brusnega koluta 220-300 mm Pgodpfx Asx U A Ugoh Ujl Teža stroja ca. 2200 kg

Stanje: dober (rabljeno), Leto izdelave: 2021, Offer 23053 Technical Data: - Load capacity per roller block: 2,000 kg - Roller dimensions: Ø 60 x 100 mm - 8 support rollers - Hydraulic lifting device stroke: 50 mm - Lifting device must be operated by a separate hydraulic power unit; hydraulic power unit and connecting hoses are not included Psdpfx Ahorl Iyno Uogl - Space requirement: approx. W 800 x H 350 x D 600 mm - Weight (each): approx. 180 kg

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 29-0288, Offer 04612 Technical specifications: - Cutting capacity at 90° round: 260 mm - flat: 450 x 240 mm - Cutting capacity at 45° round: 230 mm - flat: 240 x 200 mm - Machine is mounted on original swiveling base Podpjgin Ndjfx Ah Uegl - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure infinitely variable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Stanje: rabljeno, TECHNICAL DATA - Number of stations: 12 - Table indexing: 12 x 30 [°] - Collet type: SCHAUBLIN W25 - Max. clamping diameter: 25 [mm] - Max. workpiece length: 100 [mm] - Supply voltage: 3x 400 [V] - Installed power: 32 [kW] - Machine dimensions: 2700 x 2700 x 2500 [mm] - Weight: 4000 [kg] Pgodsuhbwcjpfx Ah Usl EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT 5.07.018-4, capacity 4200 mm - Position 1: Cut-off - Position 2: Longitudinal drilling 30/60 - Position 3: Longitudinal drilling 30/60 - Position 4: CNC turning 2 axes - Position 5: Reversing - Position 6: Radial drilling 30/60 - Position 7: CNC turning 2 axes - Position 8: Angular drilling 30/60 - Position 9: Radial drilling 30/60 - Position 10: Angular drilling 20/50 - Position 11: Radial drilling 20/50 - Position 12: Longitudinal drilling 30/60 - Ejection between positions 12 and 1 - Workpiece conveyor belt - Chip conveyor KNOLL 450 K-1/2000 - Coolant tank KNOLL KTS-25-60-T - HP pump: 40 [bar] - Filtration KNOLL VRF 500

Stanje: rabljeno, TECHNICAL DATA - Number of positions: 16 - Indexing time: 0.7 [sec] - Max. bar diameter: 32 [mm] - Clamping type: Collet VB 32 - Max. part length: 150 [mm] - Max. number of horizontal units: 16 - Max. number of vertical units: 8 - Max. total number of units: 24 - Electrical supply: 400 [V] Podpfx Aeuhbwieh Ujgl - Installed power: 40 [kW] - Dimensions: 9.8 x 4 x 2.9 [m] - Weight: 6,500 [kg] EQUIPMENT - CNC SIEMENS Sinumerik 805 - Bar feeder HYDROMAT - 2 CNC turning units (2 axes) - Parts conveyor belt - Chip conveyor - Coolant tank - Filtration

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 48 - Number of Stations: 16 - Number of Units: - Number of Units Possible Horizontally: 16 - Number of Units Possible Vertically: 7 - Max. Diameter: 45 [mm] - Max. Workpiece Diameter: 150 [mm] - Basic Unit GM50/150: * Z Stroke: 150 [mm] * Spindle Power: 5 [kW] * Spindle Speed: 0 - 8000 [rpm] - X/Y Slide: * X Travel: +/- 40 [mm] * Y Travel: +/- 20 [mm] - Dimensions: 14000 x 4800 x 3000 [mm] - Weight: 13 [t] - Operating Hours: 4283 [h] ACCESSORIES - CNC Control Bosch Rexroth INDRAMOTION MTX-L85 - Station 1: * Sawing Unit 52/100, 3 Axes - Station 2: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ (internal coolant supply) - Station 3: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) * IKZ - Station 4: * Slide 50/150 (manual adjustment) ref. 22.10.002-1 * Unit 50/150 ref. 22.42.001-6 (1 axis) Pgodpfx Aheu N Ivqj Ujl * IKZ - Station 5: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 6: * CNC Slide 50/150 ref. 22.10.001-4 (2 axes) * CNC Unit 50/150 ref. 22.42.001-6 (with CNC turning function) * IKZ - Station 7: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Recessing Unit ref. 22.42.041.1 - Station 8: * CNC Slide 50/150 ref. 22.10.001.4 (2001) * CNC Unit 50/150 ref. 22.42.001.6 (with CNC turning function) - Station 9: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.039.2 - Station 10: * Slide 50/150 manual adjustment ref. 22.10.002.1 * Sawing Unit ref. 22.42.039.8 - Station 11: * CNC Slide 50/150 ref. 22.10.001.4 * Unit 50/150 ref. 22.42.001.6 (CNC turning function) - Station 12: * Slide 50/150 ref. 22.10.002.1 * Sawing Unit ref. 22.42.041.1 - Station 13: * CNC Slide 50/150 ref. 22.10.001.4 * Sawing Unit ref. 22.42.041.1 - Station 14: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) - Station 15: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Station 16: * CNC Slide 50/150 ref. 22.10.001.4 * CNC Unit 50/150 ref. 22.42.001.6 (turning function) * IKZ - Bar Feed Magazine Length: 4 meters - Coolant Tank KNOLL (2000 liters) with high pressure pump HP 60 [bars] - Chip Conveyor

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of processing stations: 9 - Indexing time: 2 [sec] PROCESSING UNIT - Designation: UV151-3 - Number of units: 1 - Travel distance X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] PROCESSING UNIT - Designation: UV50-3 - Number of units: 8 - Travel distance X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: Electrospindle Ø38 * Number of spindles: 14 * Tool interface: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] Pgjdsv Rgy Hepfx Ah Usl - Spindle type: Electrospindle Ø38 * Number of spindles: 4 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: Electrospindle Ø120 * Number of spindles: 1 * Tool interface: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: Electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool interface: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Space requirement: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control system: Siemens - Coolant container - Coolant tank * with high-pressure pump - Chip conveyor - Oil mist extraction: ELBARON RON/A 120

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 27 - Number of Stations: 12 - Number of Machining Stations: 9 - Indexing Time: 2 s MACHINING UNIT - Designation: UV151-3 - Number of Units: 1 - Travel Path X/Y/Z Axes: 110 / 150 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm MACHINING UNIT - Designation: UV50-3 - Number of Units: 8 - Travel Path X/Y/Z Axes: 40 / 120 / 100 mm - Rapid Traverse Speed: 6500 mm/min - Resolution: 0.001 mm SPINDLES - Spindle Type: Electrospindle Ø38 * Number of Spindles: 14 * Tool Holder: ISO10 * Spindle Speed: 18,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø38 * Number of Spindles: 4 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW - Spindle Type: Electrospindle Ø120 * Number of Spindles: 1 * Tool Holder: HSK40 * Spindle Speed: 8,710 rpm * Spindle Drive Power: 3.8 kW Pedpsw Huhcofx Ah Usgl - Spindle Type: Electrospindle Ø38 * Number of Spindles: 2 * Tool Holder: ISO10 * Spindle Speed: 9,000 rpm * Spindle Drive Power: 0.25 kW ELECTRICAL SUPPLY - Supply Voltage: 400 V - Total Connected Load: 10 kW WEIGHT AND DIMENSIONS - Required Floor Space: 4600 x 3600 mm - Machine Height: 3200 mm - Machine Weight: 13,500 kg - Accessories ACCESSORIES - Control: Siemens - Coolant Container - Coolant Tank with High-Pressure Pump - Chip Conveyor - Oil Mist Extraction: ELBARON RON/A 120 - Charger - Fire Extinguishing System - Posing

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 27 - Number of stations: 12 - Number of machining stations: 9 - Indexing time: 2 [sec] MACHINING UNIT - Designation: UV151-3 - Number of units: 1 - Travel X/Y/Z axes: 110 / 150 / 135 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] MACHINING UNIT - Designation: UV50-3 - Number of units: 8 - Travel X/Y/Z axes: 40 / 120 / 100 [mm] - Rapid traverse speed: 6500 [mm/min] - Resolution: 0.001 [mm] SPINDLES - Spindle type: electrospindle Ø38 * Number of spindles: 14 * Tool holder: ISO10 * Spindle speed: 18,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø38 * Number of spindles: 4 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] - Spindle type: electrospindle Ø120 * Number of spindles: 1 Pgodpjv Rgyysfx Ah Usl * Tool holder: HSK40 * Spindle speed: 8,710 [rpm] * Spindle drive power: 3.8 [kW] - Spindle type: electrospindle with reduction gearbox Ø38 * Number of spindles: 2 * Tool holder: ISO10 * Spindle speed: 9,000 [rpm] * Spindle drive power: 0.25 [kW] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 10 [kW] WEIGHT AND DIMENSIONS - Required space: 4600 x 3600 [mm] - Machine height: 3200 [mm] - Machine weight: 13,500 [kg] ACCESSORIES - Control: Siemens - Coolant container - Coolant tank *with high-pressure pump - Chip conveyor - Oil mist extractor: ELBARON RON/A 120

Leto izdelave: 2025, stanje: kot nova (razstavni stroj), Degree of automation: Automatic / Fully automatic Ring diameter / Inner diameter (mm): 450 Total machine length (mm): 2200 Total machine weight (kg): 320 Max. rotation speed (rpm): 90 Supply voltage (V): 230 V 1Ph+N 50/60 Hz Total installed power (kW): 0.75 Coil weight (kg): 12.3 kg Pgedpfjn Ar T Dsx Ah Usl Minimum packaging / Minimum product (mm): 100x18x450 (with short partial bridge) Working pressure (Bar): 6 Price includes training and instruction at our demonstration center. Free of charge material test with materials provided by you. Side strike available at additional cost.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1960, številka stroja/vozila: 719, Manufacturer: Hurth Model: LF 00 Machine No.: 719 Year of manufacture: approx. 1960 Weight: approx. 400 kg General / Technical Data: Used horizontal keyway milling machine with crank-driven slot length adjustment and automatic depth infeed. Keyway width for cutter diameter: from 2 to 10 mm Slot length per pass: 0 to 60 mm + cutter diameter 10 depth feed rates: 0.03 to 0.3 mm Milling feed: 8 table traverse speeds via crank mechanism: 5.1 / 7.3 / 10.2 / 13.9 / 18.4 / 25.4 / 34.7 / 49.5 strokes/min Spindle speeds: 4 steps: 970, 1370, 1950, and 2750 rpm Table dimensions (fixed table): 160 mm x 355 mm Table elevation adjustment: 40 mm Table traverse (cross travel against the cutter): 110 mm Power supply / Spindle motor output: 380 Volt, 50 Hz / 0.8 kW / 920 rpm Approx. machine dimensions (L x W x H): 670 mm x 1100 mm x 1200 mm Accessories / Special Features: Chip tray Pgsdpog Uq Dfofx Ah Usl Coolant system Machine documentation Remarks: The machine is in a condition appropriate for its age. It is primarily designed for small to medium batch production. Easy slot length adjustment via crank mechanism.

Leto izdelave: 1999, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal Broaching Machine Model: RIW 10x1600x400 Weight: 2,700 kg General / Technical Data: Horizontal hydraulic internal broaching machine in nearly new condition, equipped with a tool support system, ideal for the use of flat broaching tools. Pgedpfx Ahsr A Hcbe Uel Broaching stroke: 1,600 mm Pulling force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (limited by tool pan housing) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (W x D x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (excluding work area) Power supply: 400 V, 50 Hz Connected load: 9 kW Equipment: • Machine features electric control for the broaching movement with both manual and automatic operation • Integrated coolant and cutting fluid system • Tool support system for flat broaching tools (no feed mechanism) • Broaching slide with draw head mounting is equipped with flat guides on both sides Accessories: • 1 universal draw head for flat shanks from 3 mm up to max. 25 mm width and a maximum pulling force of 10 kN (10,000 kg) • Complete machine documentation, as well as CE declaration of conformity Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine's stable bed and the tool support system, it is particularly well suited for easy and fast use of flat broaching tools. The machine has seen very little use and is in like-new condition. The machine is available for inspection at our warehouse and is ready for demonstration under power. Our direct contact details, as well as further information about the machine, can be found in the attached PDF document.

Leto izdelave: 1971, stanje: zelo dobro (rabljeno), Horizontal Internal Broaching Machine Arthur Klink RIW 16x1800 -WAG 718- Manufacturer: Arthur Klink Model: RIW 16 x 1800 Year of manufacture: 1971 Max. pulling force: 16 t Max. stroke: 1800 mm Pjdjhpqquepfx Ah Uogl Max. cutting speed: 7 m/min Max. return speed: 25 m/min Max. tool diameter: Ø 95 mm Weight: 4.8 t

Leto izdelave: 1994, stanje: zelo dobro (rabljeno), številka stroja/vozila: 04.2398, Manufacturer: Arthur Klink Model: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of manufacture: fully refurbished by the manufacturer in 1994 Weight: 3,700 kg Tensile force: 10,000 kg (100 kN) Max. stroke: 1,500 mm Max. workpiece diameter: Ø 500 mm Broaching speeds: steplessly adjustable from 1 m/min up to 6 m/min Pgjdegyd T Eepfx Ah Usl Return speed: steplessly adjustable up to 20 m/min Power supply: 400V / 50Hz

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Manufacturer: Arthur Klink Year of manufacture: approx. 1960 Type: Horizontal Broaching Machine Model: RH 10-50 Machine no.: 241 Weight: 3,700 kg General / Technical Data: Used horizontal hydraulic internal broaching machine in age-appropriate good condition, with heavy-duty manual tool feeder. Broaching stroke: 1,500 mm Tensile force: 10,000 kg (100 kN) Mounting in drawbridge: Ø 85 mm cylindrical Through-hole in clamping table: Ø 100 mm Clamping surface (workpiece area): Ø 460 mm Max. workpiece diameter: approx. 750 mm (limited by the tool feeder tray) Cutting speed: hydraulically stepless adjustable from 1.0 m/min to 7 m/min Return speed: hydraulically stepless adjustable from 5 m/min to 30 m/min Required installation space (W x D x H): approx. 6500 mm x 950 mm x 1,400 mm (without working area) Power supply: 380 Volt, 50 Hz Connected load: 8 kW Features: • Mechanical-hydraulic control for broach & return stroke • Integrated coolant/lubricant system • Manually operated tool feeder • Broaching slide with puller head mount, guided on both sides with flat guides • Adjustable tensile force limiter Pedpfx Ajr A Hdgjh Uogl Accessories: • 1 universal puller head for flat shanks, 3 mm to max. 25 mm wide • Adapter sleeve for drawbridge from Ø 85 mm to Ø 63 mm Remarks: The machine is suitable for keyway production with flat broaching tools as well as for profile broaching. Due to the machine bed and the robust tool feeder, the machine is well-suited for heavy-duty profile broaching tools. The machine is used and in very good condition for its age. The machine is held in stock and can be inspected under power. The machine has not been refurbished, neither technically nor visually, but is ready for immediate use. Profile broaching heads are largely available used upon request, depending on DIN standard, dimensions, and stock availability. Direct contact details and further information can be found in the attached PDF document.

Leto izdelave: 1985, stanje: dober (rabljeno), številka stroja/vozila: 04.2187, Hydraulic Internal Broaching Machine in Good Working Condition Manufacturer: Arthur Klink Year of Manufacture: 1985, refurbished Psdpfxjixntwe Ah Uegl Weight: 2 t Model: RIW 10 x 1200 x 400 Machine No.: 04.2187 Tensile Force: 10,000 kg at 3 m/min Broaching Speeds: hydraulically variable from 1 m/min to 7 m/min Return Speed: hydraulically variable from 7 m/min to 30 m/min Maximum Stroke: 1200 mm Broaching Tool Clamping: universal pull head for flat shanks up to 26 mm width Maximum Workpiece Diameter: Ø max. 480 mm (limited by oil and chip tray) Table Bore: Ø 70 mm Power Supply: 380 Volt / 50 Hz / 5 kW

Leto izdelave: 1960, stanje: nepreverjeno (rabljeno), Forst RF 20x2000 Internal Broaching Machine -WKG 189- Specifications: Manufacturer: Forst Model: RF 20x2000 Year of manufacture: 1959 Maximum pulling force: 20 t Maximum stroke: 2000 mm Maximum cutting speed: 5.6 m/min Maximum return speed: 30 m/min Pjdpfx Ahehu E Egj Uegl Maximum workpiece diameter: Ø 300 mm Maximum tool diameter: Ø 90 mm Weight: 3.5 t Note: without tray