CNC vodoravni rotacijski stroj za prenos

PFIFFNER - HYDROMAT HB 32/16

Stanje: rabljeno, Leto izdelave: 2013, Article: Rotary Transfer Machine Make: Pfiffner Model: Hydromat HB 32-45/16 CNC Year of manufacture: 2013 Electro-hydraulic control, fully automatic Excerpt from offer: Coolant system with chip conveyor and Knoll vacuum rotary filter Dusdpfx Aeruvaqjflsl High-pressure pump 50 bar Second coolant ring Water cooler type 1600 Collets type B32-45 UP Control: Siemens Sinumerik 840D – CNC / S7-PLC incl. modem (for teleservice) 1 bar feeder magazine type IEMCA: bundle loader (year 2011) 1 cut-off unit: saw blade D250mm 2 feed units VE 26/80-HSK: spindle stroke max. 80mm; spindle speed max. 7200 rpm; drive power up to 2.2kW; HSK 32 2 vertical slides 26/80 with 36° angular position 2 drilling heads 26/80-HSK: HSK 32 1 feed unit VE 36/100-HSK: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40 4 feed units VE 36/100-HSK internal coolant: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 6 drilling heads 36/1000-HSK: HSK 40 2 CNC X-Y-Z turning devices outside the collet plate: pick-up unit NC 26/100; 2 deburring spindles 1 CNC horizontal cross slide 26100-HSK: X/Y travel 1 CNC feed unit VE 36/100-HSK internal coolant: spindle stroke max. 100mm; spindle speed max. 5430 rpm; drive power up to 2.2kW; HSK 40; central coolant supply 2 CNC turning units 50/100-PSK: with face slide head ES-PDK-12 (inserter with 2 tool holders); Z-axis 100mm; X-axis 12mm; n max. 5000 rpm; 4kW 1 turning unit WDE 30/60 1 turning tube with insert rod 3 chip break valves SBV-100 Tool monitoring Please contact us for further information and pictures via mail(at) or

Stanje: rabljeno, Leto izdelave: 2004, Used APV Anhydro PSD 52 stainless steel (AISI 316) spray dryer. Maximum drying capacity of water evaporation: 9.3 kg/h at a maximum air temperature of 350°C. The drying chamber has a diameter of approx. 1000 mm, straight side height of 700 mm, and a conical bottom height of 1100 mm. Includes (1) rotary atomizer CMT model AF07 powered by an IBAG motor with 0.7 kW output, wheel diameter 63 mm, speed range 10,000–60,000 rpm. Also equipped with a 12 kW electric air heater, cyclone with container for dry product, fan, and main switchboard with integrated control panel. Duedjuk Ehxepfx Aflel

Stanje: dober (rabljeno), Leto izdelave: 1994, CNC stroj za spiralno savijanje, kapacitet 50 cm³, minimalni-maksimalni promjer spirale 500-3.500 mm. Dedpjiu Acpefx Afljul

Stanje: rabljeno, Used Alfa Laval "Centritherm" CT-6 vacuum disc rotary evaporator. Maximum water evaporation capacity approx. 800 kg/h. This is a complete evaporation unit consisting of: 1. Centritherm CT-6 vacuum disc evaporator, mounted on a platform 2. Alfa Laval plate heat exchanger, model P2-HL 3. Control panel 4. Feed pump 5. Concentrate pump Djdpelc Dwvjfx Afljul 6. Condensate pump 7. Vacuum pump 8. Interconnecting piping 9. Mounting tools for disassembly of the discs and the drum itself

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, Oprema: Dusdpsr D N Eqsfx Aflel 1 desni vlek sani 1 ekscentrična stiskalnica 250 kN 4 normalni agregat sani 1 ozek agregat sani Delovno območje: Debelina žice: do 6,0 mm Širina traku: do 80 mm Dolžina vleka: do 520 mm Zmogljivost: 10 - 250 kosov/min.

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Dujdpfxjhzbipj Afljl Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, Wire diameter range: 1.8 - 5.0 mm Dodpfx Asf Tymbofleul Ring diameter: 80 - 600 mm Wire feed length: 0 - 10,000 mm Output: up to 30 rings/min Welding transformer: 10 kVA

Stanje: zelo dobro (rabljeno), Leto izdelave: 1973, Funkcionalnost: popolnoma funkcionalen, Tapering range: 7.0 - 1.5 mm Number of calibers: 16 Duodpfjh U A Sfex Aflol

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, Double-spindle CNC lathe with 2 spindles, 3 turrets, and 3 Y-axes Each turret with 15 stations, BMT 44 Driven tools 2x C-axis 3x Y-axis Control: Fanuc 32i-TB Bar capacity: 65 mm Left spindle: 15/11 kW, Hainbuch Spanntop mini Axzug size 65 Dsdpfx Afevxu Easleul Right spindle: 11/7.5 kW, Kitagawa three-jaw chuck Finished part gripper Conveyor belt Bar feeder interface Coolant system with separate 200 l tank Cooling unit High-pressure at turret 1-3 via M-function 15 bar / 40 l/min 2x Brinkmann pumps Renishaw tool measurement for all turrets Tool monitoring for spindle and driven tools Spindle flushing through sub spindle (IKZ), Deublin rotary union Hinged belt conveyor Transformer Immediately available

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Dodpfxjtzdyzj Afleul Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!