Steinel Sh 1 nakup rabljenega (17)

Stanje: rabljeno, Leto izdelave: 1985, X-axis travel: 560 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Rotary table diameter: 270 mm Rotary table swiveling range: 0 - 24° Spindle taper: ISO 30 Spindle speeds: 31.5 - 7,100 rpm Feed rate: 1 - 10,000 mm/min Control: SINUMERIK System 8 Number of tool magazine positions: 40 Max. tool length: 255 mm Max. tool weight: 6 kg Isdpfxotycfuj Afieig Total power requirement: 32 kW Machine weight approx.: 11.6 t = 5-axis machining centre Accessories: various tool holders, coolant system

Stanje: dober (rabljeno), Stroj za rezkanje STEINEL SH4, številka stroja 5807, približne skupne mere: približno 1.060 x 1.150 x 1.540 mm (Š x G x V), hod osi X: približno 300 mm, hod osi Y: približno 150 mm, hod osi Z: približno 250 mm, površina za vpenjanje: približno 620 x 130 mm, hitrosti vretena: 32-630 vrt/min, moč. Isdpfx Asztc Etsfioig

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1991, LZ stružnica VOEST-ALPINE-STEINEL Tip: DA 180, letnik 1991, z 2-osnim digitalnim prikazovalnikom ELESTA. Višina konic: 180 mm Isdeziwy Rspfx Afioig Razdalja med konicami: 1000 mm Premer vretena: 52 mm Hitrosti vretena: 44-2000 obr./min Premer vpenjalne glave: 200 mm Nosilec orodja: MULTIFIX - B Pripravljen za uporabo, v delujočem stanju.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1969, Manufacturer: Steinel Model: 6 Station Rotary Indexing Drilling Machine BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 Station 1 – loading and unloading Station 2 – vertical drilling unit type: BE 10 VK Station 3 – horizontal drilling unit Station 4 – horizontal and vertical drilling unit type: BE 6 VK Station 5 – horizontal spindle unit type BE VK with additional guide, fitting: clamping sleeve Ø 28 mm Station 6 – horizontal drilling unit and vertical tapping unit type: BE 6 VK Feed for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Isdpfxew H I R Ro Afijig Rotary indexing table: mechanical indexing with 8 positions Ø 400 mm Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine features a robust cast iron machine table with chip disposal to the rear and a separate large coolant tank (outlet to the back) • Safety light curtain by Sick • Extensive range of spare parts, spindle units, and rotary indexing tables included • The machine is equipped with a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Razdalja med konicama 1.000 mm Obdelovalni premer 410 mm Vrtina vretena 54 mm Pinola sprejema MK 4 Teža stroja cca 2,1 t Iiedpfx Ajzd S Daefieg Vključuje trivoščetno vpenjalno glavo Vključuje Multifix hitromenjalni držalo orodja Vključuje valjčne konice

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Vrtina vretena: 42 mm Premer obdelave nad posteljo: 330 mm Ijdpfx Aeykahzofisig Nosilec Multifix Konjiček z MK3 vpenjalom Število obratov: 1-4500 1/min

Stanje: dober (rabljeno), Stroj za navojčenje STEINEL. Ijdpfx Afoztczueijig

Stanje: dober (rabljeno), Leto izdelave: 1971, Modelarska rezkalna naprava, univerzalna modelarska rezkalna naprava, rezkalni stroj, univerzalni rezkalni stroj, orodjarski rezkalni stroj, vrtalno-rezkalni stroj, modelarska rezka, vertikalna rezkalna naprava -Proizvajalec: Steinel, vertikalna rezkalna naprava tip SV 4 -Namizna vpenjalna plošča: 740 x 200 mm -Križna miza: 620 x 130 mm -Pomiki: X/Y/Z 340/100/300 mm -Vretenščina: MK2 -Obrati: 112 - 2240 obr/min, desno/levo -Podajanje: 0,10 - 0,71 mm/min -Hod pinole: 100 mm -Hladilna naprava -Dimenzije: 1000/950/H1830 mm -Teža: 650 kg Iiedpfx Ajt E D D Ijfiog

Stanje: rabljeno, Horizontal machining center with dual pallet changer STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M Serial No. 34 Year of manufacture: 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table size: 500 x 400 mm Tool holder: ISO 40 Spindle speed: max. 6300 rpm, infinitely variable Main spindle drive: 12 kW Power supply: 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Pallet changer with 2 stations Iodpjutuyijfx Afijig - Interface for data transfer - Coolant system with chip conveyor Required space (L x W x H): 4100 x 2500 x 2650 mm Weight: approx. 8 tons Good condition Transport dimensions: Machine L x W x H: 3200 x 2500 x 2650 mm, approx. 7.5 tons Chip conveyor L x W x H: 3500 x 1100 x 2100 mm, approx. 600 kg

Stanje: rabljeno, Horizontal machining center with pallet changer STEINEL Type BZ 24 FFZ Iodpfx Asdzqmrsfieig with CNC control SIEMENS Sinumerik 850 M Serial No. 77 Year of construction: 1990 Travel paths X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed max. 7100 rpm, stepless Tool holder: ISO 40 Power supply: 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontal pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with cross movement as Y-axis - Coolant spray nozzles on the spindle ram and inside the work area - Coolant unit with chip conveyor underneath the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Required space (L x W x H): 9000 x 3100 x 3200 mm Weight: 13.5 tons Transport dimensions for truck: Machine with tool magazine (L x W x H): 9000 x 3000 x 3000 mm Chip conveyor (L x W x H): 4700 x 1000 x 1450 mm Container loading into a 40" OT HC is possible. In good condition

Stanje: rabljeno, Stroj ni v delovnem stanju, upravljanje se ne zažene, dobavitelj rezervnih delov z upravljalnim sistemom. Horizontalno obdelovalni center s spreminjalnikom palet STEINEL tipa BZ 24 FFZ z nadzorno enoto CNC SIEMENS Sinumerik 850 M Proizvodna številka: 58, leto proizvodnje: 1990 Iiodpfxjdzqmfj Afijg Hod: X: 630 mm, Y: 500 mm, Z: 500 mm Velikost mize na paleto: 400 x 400 mm Vrtenje palete: os B Hitrost vretena: do 7100 vrt/min, brezstopenjsko Vpenjalni sistem orodja: ISO 40 Priključna napetost: 380 voltov, 50 Hz, 80 amperov - Spreminjalnik orodij z 60 mesti za orodja in dvojnim ročnim prijemalom - Spreminjalnik palet s 4 paletami - Horizontalno nameščen prostor za paleto za obdelavo, gibanje osi = os X - Vrtenje palete = os B - Nosilec vretena kot os Z - Nosilec vretena s prečno gibljivo osjo kot os Y - Šobe za hlajenje na nosilcu vretena in v obdelovalnem prostoru - Sistem za hlajenje z odvajalnikom струžin pod obdelovalnim prostorom - Nadzorna enota CNC SIEMENS Sinumerik 850 M z monitorjem TFT - Vmesnik za prenos podatkov Potrebna površina: D x Š x V: 9000 x 3100 x 3200 mm Teža: 13,5 tone Stroj ni v delovnem stanju, upravljanje se ne zažene – sicer pa je v dobrem stanju. Dimenzije za transport: Stroj z revijo za orodja: D x Š x V: 9000 x 3000 x 3000 mm Odvajalnik струžin: D x Š x V: 4700 x 1000 x 1450 mm Možen nakup posameznih delov, za potrebne rezervne dele se obrnite na nas.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 x navojna vrtalna naprava Steinel Isdpfszk Iyqox Afieig BT 6.52 z napravo za hlajenje + manjša vpenjalna priprava Tehnični podatki: Največja velikost navoja: M 6 (dodatne tehnične podatke si oglejte na fotografijah) Napravo si lahko ogledate v delovanju.

Stanje: dober (rabljeno), Dvostebrično orodje za prebijanje, ločilno orodje, orodje za prebijanje, stiskalnica, matrica za prebijanje, prebijalni udarec, stebrično ogrodje - Proizvajalec: Steinel, dvostebrično orodje za prebijanje - Vpenjanje: Ø 40 mm - Razmak med stebri: 165 mm - Mere prebijanja: 1x Ø7 mm / 1x radij 13 mm, glejte fotografije z merami Iiodpfx Aszcwlnefieg - Dimenzije: 295/235/V250 mm - Teža: 19 kg

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: nepreverjeno, Manufacturer: Steinel Iedpfx Afswyn S Usioig Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling operations on small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical threading unit Feed of drilling units: mechanical feed via quill Drill heads: single spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine has a robust machine table with chip disposal to the underside of the table center and a separate large coolant tank • Extensive range of clamping and auxiliary tools • The machine is equipped with a 6-station rotary indexing table

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of manufacture: 1967 Weight: approx. 3,000 kg General Information / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling operations with multi-spindle heads Drilling units: 4 units Station 1 – Loading and unloading Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Feed of drilling units: mechanical feed via quill Drilling heads: multi-spindle drilling units Rotary indexing table: mechanically indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic via centric expanding mandrel, workpiece Ø approx. 80 mm Dimensions of machine (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Features: • Machine designed for large batch production • Stable cast iron machine table with side chip removal and separate coolant tank • automatic safety guard door • 5-station rotary indexing table Iijdpfx Afow H Rh Soiog • heavy-duty cast iron machine table, ideal for custom rebuilding or retrofitting • machine suitable for refurbishment / rebuild

Stanje: rabljeno, Leto izdelave: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of manufacture: 1971 Weight: approx. 4,500 kg Iijdpjw E Hpvsfx Afieg General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 3 – Vertical drilling unit Type: BE VK, Mounting for collets Station 4 – Horizontal drilling unit Type: BE VK, Mounting: collet sleeve Ø 36 mm Station 5 – Vertical spindle unit Type: BE VK, Mounting: collet sleeve Ø 28 mm Station 6 – Horizontal drilling unit Type: BE VK with additional guide, Mounting: collet sleeve Ø 28 mm Station 7 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 8 – Vertical spindle unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 28 mm Drilling unit feed: mechanical feed via quill Rotary indexing table: mechanically actuated, 8 positions, Ø 500 mm Workpiece clamping: manually operated via collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special features: • Designed for large-scale production • The machine is equipped with a robust cast machine table with chip removal to the rear and a separate large coolant tank • Extensive range of clamping and auxiliary tools included • The machine features a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very robust machine bed – ideally suited for the construction or rebuilding of a special-purpose machine

Leto izdelave: 1975, stanje: rabljeno, General / Technical Data: Used machine Speed via flat belt drive with 3 steps Speed range: 700 rpm, 1400 rpm, and 2800 rpm Quill stroke: 90 mm Quill diameter: 35 mm Column diameter: 60 mm Throat: 200 mm Mounting: Direct drill chuck mounting Table surface: 380 mm x 300 mm Dimensions: approx. 720 mm x 480 mm x 750 mm Weight: 60 kg Remarks: Excellent spindle run, three-phase connection, robust industrial design, Ijdjcu I Exepfx Afioig Year of manufacture estimated approx. 1975