Prenosni stroj

Steinel

Stanje: rabljeno, Horizontal machining center with dual pallet changer STEINEL type BFZ 5 Fsdeutuyiopfx Abtogc with CNC control SIEMENS Sinumerik 810 M Serial No. 34 Year of manufacture: 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table size: 500 x 400 mm Tool holder: ISO 40 Spindle speed: max. 6300 rpm, infinitely variable Main spindle drive: 12 kW Power supply: 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Pallet changer with 2 stations - Interface for data transfer - Coolant system with chip conveyor Required space (L x W x H): 4100 x 2500 x 2650 mm Weight: approx. 8 tons Good condition Transport dimensions: Machine L x W x H: 3200 x 2500 x 2650 mm, approx. 7.5 tons Chip conveyor L x W x H: 3500 x 1100 x 2100 mm, approx. 600 kg

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Fgodpfxeu Rptyo Abtsc Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Stanje: dober (rabljeno), 1 x drilling and tapping machine Steinel GT.6.52 Fedpfx Ajma Efyebtjgc Technical specifications: Spindle speeds: 500/630/1000/1250 rpm Tapping capacity in steel: M 6 Max. collet clamping diameter: 10 mm The machine can be inspected under power.

Stanje: rabljeno, Leto izdelave: 1985, X-axis travel: 560 mm Y-axis travel: 450 mm Z-axis travel: 450 mm Rotary table diameter: 270 mm Rotary table swiveling range: 0 - 24° Spindle taper: ISO 30 Spindle speeds: 31.5 - 7,100 rpm Fodpfx Aetycfusbtjgc Feed rate: 1 - 10,000 mm/min Control: SINUMERIK System 8 Number of tool magazine positions: 40 Max. tool length: 255 mm Max. tool weight: 6 kg Total power requirement: 32 kW Machine weight approx.: 11.6 t = 5-axis machining centre Accessories: various tool holders, coolant system

Stanje: rabljeno, FANUC Robocut C 600 iA je žična erozijska stroj, zasnovan za natančnost, visoko točnost in zanesljivost. Miza 600×400 mm; največji obdelovanec 1050×820×300 mm; obremenitev mize 1000 kg; pomiki X600 Y400 Z310 U200 V200; žica od 0,1 mm. Priklop 50 Hz 3x 400 V; skupna moč 11 kVA; teža ~1500 kg; mere 1800×1600×2000 mm. Oprema: svetilka, avtomatsko vdevanje žice, tekočinsko hlajenje Daikin, samodejna drsna vrata, steklena merila X,Y, rotacijsko vreteno Hirschmann F. Dosega ozke tolerance; panoge: avtomobilska, urarska, orodjarna, letalska in medicinska tehnologija. Fgsdpfeyxprtox Abtec

Leto izdelave: 2001, stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, skupna masa: 150 kg, skupna dolžina: 900 mm, največja hitrost vrtenja: 1.400 obr/min, debelina stene: 3 mm, številka stroja/vozila: Z01042.09, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Oddaja ponudbe zavezuje k prevzemu v roku med 23.06.2026 in 26.06.2026! TEHNIČNE PODROBNOSTI Premer bobna: 300 mm Maks. obremenitev: 30 kg Debelina stene: 3 mm Število obratov: 1.400 obr/min PODROBNOSTI O STROJU Obratovalna napetost: 400 V Priključna moč: 4 kW Mere in teža Mere (D x Š x V): 900 x 600 x 1.000 mm Teža: 150 kg Fgjdjy D Sqpspfx Abtoc Zunanja referenca: 44

Stanje: dober (rabljeno), Leto izdelave: 1986, številka stroja/vozila: 1111, Ponudba 24093 Fgedpfjy Ibg Iox Abtjc Tehnični podatki: - Najv. premer trna zakovice: 6 mm - Sila podajanja: 1200 daN - Nastavitev časa kovičenja: 0–10 s - Izsev: 140 mm - Velikost mize: 250 x 175 mm - Nastavljiva vgradna višina / višina mize - Hod: 40 mm - Obratovalni tlak: 5 bar - Reduktor tlaka - Pogon: 400 V / 0,6 / 0,75 kW - Potreben prostor cca: Š 500 x V 1650 x G 650 mm - Teža cca: 480 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, CNC stružnica GILDEMEISTER NEF 400 Leto izdelave: 2005 Siemens 840 D Tehnični podatki: Stružna dolžina: 650 mm Premer obdelave nad posteljo: 400 mm Premer obdelave nad sani: 270 mm Preboj vretena: 65 mm Prehod po osi X: 220 mm Prehod po osi Z: 700 mm Največje število obratov glavnega vretena: 4.000 obr/min 8-pozicijski revolverski nosilec orodja Teža stroja: cca 3.175 kg Fjdjyin Imopfx Abtsgc

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: nepreverjeno, Manufacturer: Steinel Fgedpewyn S Usfx Abtec Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling operations on small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical threading unit Feed of drilling units: mechanical feed via quill Drill heads: single spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine has a robust machine table with chip disposal to the underside of the table center and a separate large coolant tank • Extensive range of clamping and auxiliary tools • The machine is equipped with a 6-station rotary indexing table

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1969, Manufacturer: Steinel Model: 6 Station Rotary Indexing Drilling Machine BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 Station 1 – loading and unloading Station 2 – vertical drilling unit type: BE 10 VK Station 3 – horizontal drilling unit Station 4 – horizontal and vertical drilling unit type: BE 6 VK Fedew H I R Ropfx Abtjgc Station 5 – horizontal spindle unit type BE VK with additional guide, fitting: clamping sleeve Ø 28 mm Station 6 – horizontal drilling unit and vertical tapping unit type: BE 6 VK Feed for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanical indexing with 8 positions Ø 400 mm Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine features a robust cast iron machine table with chip disposal to the rear and a separate large coolant tank (outlet to the back) • Safety light curtain by Sick • Extensive range of spare parts, spindle units, and rotary indexing tables included • The machine is equipped with a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: nepreverjeno, številka stroja/vozila: XXX,

Stanje: rabljeno, Leto izdelave: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of manufacture: 1971 Weight: approx. 4,500 kg General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 3 – Vertical drilling unit Type: BE VK, Mounting for collets Station 4 – Horizontal drilling unit Type: BE VK, Mounting: collet sleeve Ø 36 mm Station 5 – Vertical spindle unit Type: BE VK, Mounting: collet sleeve Ø 28 mm Station 6 – Horizontal drilling unit Type: BE VK with additional guide, Mounting: collet sleeve Ø 28 mm Station 7 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 8 – Vertical spindle unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 28 mm Drilling unit feed: mechanical feed via quill Rotary indexing table: mechanically actuated, 8 positions, Ø 500 mm Workpiece clamping: manually operated via collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special features: • Designed for large-scale production • The machine is equipped with a robust cast machine table with chip removal to the rear and a separate large coolant tank • Extensive range of clamping and auxiliary tools included • The machine features a mechanically switched 8-station rotary indexing table Fsdpfxjw E Hpve Abtjgc • Coolant system with chip tray • Very robust machine bed – ideally suited for the construction or rebuilding of a special-purpose machine

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 500 mm, največja hitrost vretena: 2.500 obr/min, moč vretenovega motorja: 37 W, vrtilni moment: 1.450 Nm, zunanji premer vpenjalne glave: 315 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Stružnica Voest Alpine Steinel WNC 500 S x 1000 Premer struženja: 500 mm Dolžina struženja: 1000 mm Krmiljenje: Sinumerik 810 T-GA 2 2-stopenjski menjalnik i = 4 Moč: 37 kW pri 100 % ED Fgjdpfx Abjydfy Njtsc Maks. navor pri struženju: 1450 Nm Konjiček ročni s vpenjanjem in povezavo Maksimalno število obratov: 2500 obr/min Elektronsko ročno kolo Za rezkanje: Hidravlično preklopni servomotor z 720 Nm in največ 18,5 obr/min 12-pozicijski revolverski revolver z gnanimi orodji, največ 3000 obr/min pri 4 kW Nosilec orodja VDI 40 Veliko držal VDI 40 za notranje in zunanje obdelave ter gnana orodja, vključno z nekaterimi orodji - npr. notranje stružne rezila, sicer brez orodij!

Stanje: pripravljen za uporabo (rabljen), Length: 8,225 mm, width: 3,200 mm, complete with documentation. Fgsdpsi Ew Dpefx Abtoc

Stanje: rabljeno, Horizontal machining center with pallet changer STEINEL Type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M Serial No. 77 Year of construction: 1990 Travel paths X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed max. 7100 rpm, stepless Tool holder: ISO 40 Power supply: 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontal pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with cross movement as Y-axis - Coolant spray nozzles on the spindle ram and inside the work area - Coolant unit with chip conveyor underneath the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Required space (L x W x H): 9000 x 3100 x 3200 mm Weight: 13.5 tons Transport dimensions for truck: Machine with tool magazine (L x W x H): 9000 x 3000 x 3000 mm Chip conveyor (L x W x H): 4700 x 1000 x 1450 mm Fedpfx Abedzqmrotogc Container loading into a 40" OT HC is possible. In good condition