Stroj za erodiranje žice

Charmilles Agie 310-510

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: nepreverjeno, številka stroja/vozila: XXX,

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 31 h, 3D Coordinate CNC Measuring Device Profitech Innometrik Advanced in Gantry Design (Demo Unit at Special Price) Open Cable Key Features of Gantry Design: Gantry construction with a low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. Granite guideways ensure consistent thermal, dimensional, torsional, and geometrical stability of the machine. 24 air bearings for smooth movement of all three axes. High dynamics for improved performance—the machine can reach high accelerations, comparable to medium and large CMMs. Pgedodyah Sepfx Adyeg Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measuring results. Air filters and regulators included. Pneumatic counterbalance system for the Z-axis. Granite table with M10 threaded inserts. Passive vibration isolation pads. Technical Specifications Measuring range: X: 500 mm Y: 600 mm Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 / ISO 10360-4: Volumetric probing deviation: MPEP = 2.2 µm Volumetric length measuring deviation: MPEE = 2.2 + L / 350 (µm) Ambient Conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Available as a complete package with probe system, software, commissioning, and training. (Annual maintenance & calibration also available)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, obratovalne ure: 66.600 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, We offer you the following: Technical data: Controller: Heidenhain iTNC 530 HSCI Travel ranges: - X-axis travel: 600 mm - Y-axis travel: 500 mm - Z-axis travel: 500 mm Main spindle: - Speed range: 20 – 18,000 rpm NC rotary table: - Clamping surface: 600 x 500 mm - Maximum load: 400 kg - B-axis: -5° to +110° - C-axis: 360° Tool changer: - Tool holder: HSK-A63 Pjdpfexgnz Tjx Adyjgg - Number of tool positions: 210 Equipment and accessories: - Heat exchanger for spindle and table - Active cooler for control cabinet - Direct measuring system - Full enclosure - 3D control - DMG ERGOline control - Direct measuring systems in NC swivel rotary table incl. table cooling - Laser tool measurement BLUM NT - Calibration arbor with tool holder - Infrared probe, Heidenhain TS 649 - Prepared for 3D quickSET - Scraper belt chip conveyor - ICS (internal coolant supply), 40 bar, 600l tank, incl. rotating inspection window, barrier air, linear measuring systems, bed flushing - Rinsing gun - Mechanical oil and emulsion mist separator - Air blast through the center of the spindle - Operating mode 4 - Machine preparation for handling systems, consisting of: - Automatic, lateral loading door - Electrical interface for articulated-arm robot - Pneumatic control and monitoring of the zero point clamping system - Selection/deselection of handling system via switch on the machine control panel - Incl. additional rinsing in the working area - Incl. machine preparation for job management - Incl. control panel arrangement left - Energy supply to the machine table incl. two-channel rotary union - Additional machine-side clamping hydraulics, 1 clamping circuit: - Clamping hydraulics, 1 circuit, 30 – 240 bar, pressure adjustment via proportional valve technology - Incl. rotary union extension to 4 channels Power-on hours: approx. 66,600 h Spindle hours: approx. 44,800 h The robot shown in the images is not included in the scope of delivery. The machine will be available approximately from October/November 2025. The ball screws and linear guides in the X and Z axes have been renewed. Accessories, pictured tools, and clamping devices are included in the delivery only if explicitly stated in the additional information. Technical data, specifications, and prior sale subject to change and errors!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, SIEMENS 840D SL control system Pjdpfxswwunds Adyegg Travel paths: 550 x 320 x 420 mm Swiveling milling head: +100 / -10° Spindle taper: HSK A50 Spindle speeds: up to 12,000 rpm Tool changer: 64 positions Rotary spindle: 4,500 rpm NC swiveling rotary table with B and C axes Tool breakage monitoring Tool length measuring device 3D probe Various accessories MARCELS MASCHINEN CH

Stanje: kot nova (razstavni stroj), Leto izdelave: 2013, obratovalne ure: 1.265 h, Funkcionalnost: popolnoma funkcionalen, največja hitrost vretena: 20.000 obr/min, premer struženja: 4 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Citizen R-serija avtomatskih stružnic, namenjenih obdelavi majhnih premerov. Stroj je bil zelo malo uporabljen (izdelanih samo 15.800 kosov). Letnik 2013. Opremljen z avtomatskim podajalnikom palic ASP-04. DDV ni obračunan, če je prodaja izven Turčije. Pjdpfxovtance Adysgg

Stanje: rabljeno, Leto izdelave: 2001, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, delovne ure: 60.790 h, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Clamping force: 60 t Opening stroke: 425 mm Minimum mold installation height: 350 mm Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 Pedjh Tk Rvopfx Adyogg GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Pgedpfxsw Ucyue Adyeg Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, 7 axes Control: FANUC 18i-TB Max. bar diameter (main spindle): 16 mm Max. bar diameter (sub spindle): 16 mm Max. spindle stroke: 205 mm Max. spindle speed: 10,000 rpm Psdpjwnd Dpofx Adyogg Tools 5-position turning tool holder on linear slide 4-position drilling unit incl. drill holders (front/rear) 3 driven tools for cross machining on linear slide 4 tools incl. drill holders for rear machining

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 52.693.00, dolžina podajanja os X: 1.525 mm, dolžina pomika po osi Y: 1.525 mm, hitrost podajanja osi Y: 1 m/min, hitrost podajanja os Z: 1 m/min, Varilni robot – popolnoma opremljen Vertikalni upogibni robotski krak 6 osi Doseg: 1525 mm Opremljen z avtomatsko varilno pištolo, tip: DIX MALZ 520 Naprava za podajanje žice, proizvajalec: FRONIUS, tip: ROB.VR1500 DINSE-ZA Pgedsrl S Ufepfx Adyeg Vključuje 2 rotacijski varilni mizi Dimenzije miz: vsaka 1200 × 750 mm Pnevmatsko gnana čistilna naprava Postaja za pozicioniranje in ravnanje varilnega gorilnika Vir toka, proizvajalec: FRONIUS, tip: varilni aparat TPS 4000 Dobavljeno s tehnično dokumentacijo Opomba: Stroj je mogoče prepeljati s standardnim tovornjakom. Tehnične lastnosti Dimenzije (D × Š × V): pribl. 4700 × 3500 × 3800 mm Teža: pribl. 5000 kg Letnik izdelave: 2000

Stanje: novo, Leto izdelave: 2024, pomik osi Y: 600 mm, pomik po osi Z: 450 mm, - Simple graphical programming, including GoTo function in manual mode - Machining lengths from 3,000 to 16,500 mm, depending on configuration - Free programming in DIN/ISO (G-codes) - 2-axis interpolation for X/Y axes, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min, Y-axis = 25 m/min Main spindle BT 40 - 5-fold bearing support, diameter 110/60 mm (3x angular contact ball bearing 7212, 2x deep groove ball bearing 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length: 290 mm - Maximum tool diameter: 88 mm Psdpforb Afajx Adyjgg X-axis guide - 2 units of 45 mm linear guides, each with 2 full-ball carriages X-axis drive - Helical precision rack, travel length 3,000 to 16,500 mm Y-axis guide - 2 units of 35 mm linear guides, each with 2 full-ball carriages Y-axis drive - Ball screw, 25 mm diameter, travel length 600 mm Z-axis guide - 2 units of 35 mm linear guides, each with 2 full-ball carriages Z-axis drive - Ball screw, 32 mm diameter, travel length 450 mm Standard configuration Automatic tool changer with 10 positions, mounted in the machine column