Steinel Ffz 200 nakup rabljenega (17)

Stanje: rabljeno, Horizontal machining center with pallet changer STEINEL Type BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M Serial No. 77 Year of construction: 1990 Travel paths X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed max. 7100 rpm, stepless Tool holder: ISO 40 Power supply: 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontal pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Spindle ram as Z-axis - Spindle ram with cross movement as Y-axis - Coolant spray nozzles on the spindle ram and inside the work area - Coolant unit with chip conveyor underneath the work area - CNC control SIEMENS Sinumerik 850 M - Interface for data transfer Required space (L x W x H): 9000 x 3100 x 3200 mm Weight: 13.5 tons Transport dimensions for truck: Machine with tool magazine (L x W x H): 9000 x 3000 x 3000 mm Chip conveyor (L x W x H): 4700 x 1000 x 1450 mm Gjdpfx Agedzqmrsyebi Container loading into a 40" OT HC is possible. In good condition

Stanje: rabljeno, Machine not operational, control system does not start Horizontal machining center with pallet changer STEINEL Model BZ 24 FFZ with CNC control SIEMENS Sinumerik 850 M Serial No. 58 Year of manufacture: 1990 Travel: X: 630 mm, Y: 500 mm, Z: 500 mm Table size per pallet: 400 x 400 mm Pallet rotation: B-axis Spindle speed: max. 7100 rpm, infinitely variable Tool holder: ISO 40 Power supply: 380 Volt, 50 Hz, 80 Amp. - Tool changer with 60 tool positions and double-arm gripper - Pallet changer with 4 pallets - Horizontally positioned pallet station for machining, axis movement = X-axis - Pallet rotation = B-axis - Ram spindle as Z-axis - Ram spindle with cross movement as Y-axis Gbsdedzqmfjpfx Agyji - Coolant spray nozzles on the ram spindle and in the machining area - Coolant unit with chip conveyor under the machining area - CNC control SIEMENS Sinumerik 850 M with TFT monitor - Interface for data transfer Required space (L x W x H): 9000 x 3100 x 3200 mm Weight: 13.5 tons Machine not operational, control system does not start – otherwise in good condition Transport dimensions: Machine with tool magazine (L x W x H): 9000 x 3000 x 3000 mm Chip conveyor (L x W x H): 4700 x 1000 x 1450 mm

Stanje: rabljeno, Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.000 mm, premer struženja: 500 mm, največja hitrost vretena: 2.500 obr/min, moč vretenovega motorja: 37 W, vrtilni moment: 1.450 Nm, zunanji premer vpenjalne glave: 315 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Stružnica Voest Alpine Steinel WNC 500 S x 1000 Premer struženja: 500 mm Dolžina struženja: 1000 mm Krmiljenje: Sinumerik 810 T-GA 2 2-stopenjski menjalnik i = 4 Moč: 37 kW pri 100 % ED Maks. navor pri struženju: 1450 Nm Konjiček ročni s vpenjanjem in povezavo Gbjdpjydfy Nefx Agyei Maksimalno število obratov: 2500 obr/min Elektronsko ročno kolo Za rezkanje: Hidravlično preklopni servomotor z 720 Nm in največ 18,5 obr/min 12-pozicijski revolverski revolver z gnanimi orodji, največ 3000 obr/min pri 4 kW Nosilec orodja VDI 40 Veliko držal VDI 40 za notranje in zunanje obdelave ter gnana orodja, vključno z nekaterimi orodji - npr. notranje stružne rezila, sicer brez orodij!

Stanje: rabljeno, Horizontal machining center with dual pallet changer STEINEL type BFZ 5 with CNC control SIEMENS Sinumerik 810 M Serial No. 34 Year of manufacture: 1988 Travel X: 500 mm, Y: 400 mm, Z: 320 mm Clamping surface, table size: 500 x 400 mm Tool holder: ISO 40 Spindle speed: max. 6300 rpm, infinitely variable Gsdoutuyijpfx Agyjbi Main spindle drive: 12 kW Power supply: 380 Volt, 50 Hz, 30 kVA - Tool changer with 24 tool positions - Pallet changer with 2 stations - Interface for data transfer - Coolant system with chip conveyor Required space (L x W x H): 4100 x 2500 x 2650 mm Weight: approx. 8 tons Good condition Transport dimensions: Machine L x W x H: 3200 x 2500 x 2650 mm, approx. 7.5 tons Chip conveyor L x W x H: 3500 x 1100 x 2100 mm, approx. 600 kg

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: popolnoma funkcionalen, Vrtina vretena: 42 mm Gbsdpoykahzsfx Agyei Premer obdelave nad posteljo: 330 mm Nosilec Multifix Konjiček z MK3 vpenjalom Število obratov: 1-4500 1/min

Leto izdelave: 1982, stanje: pripravljen za uporabo (rabljen), Two Steinel BZ20 milling machines are available. Travel range X/Y/Z: 560mm/450mm/450mm, spindle speed: 7000 rpm, feed rate: 10,000mm/min, tool holder: ISO30, tool stations: 40. Rotary table diameter: 270mm, rotary table swivel range: 0°-24°, max. workpiece weight: 6kg. Control system: Siemens System 8, weight: approx. 12,000kg. For spare parts use. Gbodjtyax Sjpfx Agyji

Stanje: dober (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, 1 rabljeni nihajni / kovični stroj Proizvajalec: STEINEL Tip: NR 10 Letnik: cca 1978 Tehnični podatki Gjdpfowxxw Sjx Agyobi Površina mize: 350 x 250 mm Izkoristek: 250 mm Nastavljiva miza: 400 mm Zračni tlak: do 10 bar Skupna priključna moč: 1,3/1,6 kW Teža stroja cca: 0,45 t Prostorske zahteve cca D x Š x V: 0,7 x 0,45 x 1,8 m Podatki brez garancije

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, globina grla: 80 mm, skupna širina: 100 mm, skupna dolžina: 220 mm, nastavitev hidravličnega cilindra: 77 mm, širina mize: 100 mm, dolžina mize: 160 mm, vgradna višina: 140 mm, skupna masa: 17 kg, zahteva za prostor dolžina: 220 mm, potrebna širina: 100 mm, hod: 25 mm, Kolenski vzvodni stiskalnik / ročni vzvodni stiskalnik s kvadratnim batom Proizvajalec: Steinel Tip / številka stroja: PHK 8 Tlak: 6 kN Velikost mize: 100 x 160 mm Izsev: 80 mm Gbedpfxjxyw A Ho Agysi Hod: 25 mm Vgradna višina: 63 – 140 mm Višinska nastavitev: 77 mm Luknja bata: Ø 10 mm Teža stroja: 17 kg Potreben prostor: 100 x 220 x 600 mm

Stanje: dober (rabljeno), Leto izdelave: 1971, Modelarska rezkalna naprava, univerzalna modelarska rezkalna naprava, rezkalni stroj, univerzalni rezkalni stroj, orodjarski rezkalni stroj, vrtalno-rezkalni stroj, modelarska rezka, vertikalna rezkalna naprava -Proizvajalec: Steinel, vertikalna rezkalna naprava tip SV 4 -Namizna vpenjalna plošča: 740 x 200 mm -Križna miza: 620 x 130 mm -Pomiki: X/Y/Z 340/100/300 mm -Vretenščina: MK2 -Obrati: 112 - 2240 obr/min, desno/levo -Podajanje: 0,10 - 0,71 mm/min -Hod pinole: 100 mm -Hladilna naprava -Dimenzije: 1000/950/H1830 mm Gbodpfx Agot E D D Isyoi -Teža: 650 kg

Leto izdelave: 1975, stanje: rabljeno, General / Technical Data: Gedpocu I Exefx Agyjbi Used machine Speed via flat belt drive with 3 steps Speed range: 700 rpm, 1400 rpm, and 2800 rpm Quill stroke: 90 mm Quill diameter: 35 mm Column diameter: 60 mm Throat: 200 mm Mounting: Direct drill chuck mounting Table surface: 380 mm x 300 mm Dimensions: approx. 720 mm x 480 mm x 750 mm Weight: 60 kg Remarks: Excellent spindle run, three-phase connection, robust industrial design, Year of manufacture estimated approx. 1975

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Good day, We hereby offer you, without obligation, a used universal/vertical milling machine, model SH 4 D, manufactured by Steinel. Manufacturer: Steinel Model: SH 4 D with vertical milling head FVK 3 Machine no.: 8160 Travel range X-Y-Z-axis: X = 300 mm, Y = 150 mm, Z = 250 mm Table dimensions: 740 x 200 mm Clamping surface: 620 × 130 mm Spindle speed: 32 – 1250 rpm Feed rates: 0.2 / 0.32 / 0.5 / 0.63 / 1 / 1.6 mm/min Quill stroke / drilling spindle stroke: 100 mm Main motor power: 1.5 kW Weight: approx. 800 kg Required floor space: approx. 1,100 × 1,300 × 1,600 mm Control: conventional Note: The above technical data was taken from the operating manual, manufacturer brochures or other sources. We cannot guarantee the accuracy and completeness of this information. Scope of supply: 1 used universal/vertical milling machine, Steinel, model SH 4 D Application and condition: The machine was occasionally used in a factory locksmith shop for repair works and for fabricating spare parts for our own machinery. The machine is functional and can be inspected under power at our workshop. We would be pleased if this machine is of interest to you. Your Service Team Gbedex Rcpiepfx Agyei Mertens & Frowein GmbH

Stanje: rabljeno, Leto izdelave: 1985, X-axis travel: 560 mm Godpfjtycfusx Agyobi Y-axis travel: 450 mm Z-axis travel: 450 mm Rotary table diameter: 270 mm Rotary table swiveling range: 0 - 24° Spindle taper: ISO 30 Spindle speeds: 31.5 - 7,100 rpm Feed rate: 1 - 10,000 mm/min Control: SINUMERIK System 8 Number of tool magazine positions: 40 Max. tool length: 255 mm Max. tool weight: 6 kg Total power requirement: 32 kW Machine weight approx.: 11.6 t = 5-axis machining centre Accessories: various tool holders, coolant system

Stanje: dober (rabljeno), 1 x drilling and tapping machine Steinel Gjdpsma Efyofx Agysbi GT.6.52 Technical specifications: Spindle speeds: 500/630/1000/1250 rpm Tapping capacity in steel: M 6 Max. collet clamping diameter: 10 mm The machine can be inspected under power.

Stanje: rabljeno, Leto izdelave: 1971, Manufacturer: Steinel Model: 8 Stations Drilling Units: Type Steinel BE 10 VK Year of manufacture: 1971 Weight: approx. 4,500 kg Gbsdpfxew E Hpve Agysi General / Technical Data: 8-station rotary indexing special drilling machine for vertical and horizontal drilling in workpieces with manual collet clamping. Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 3 – Vertical drilling unit Type: BE VK, Mounting for collets Station 4 – Horizontal drilling unit Type: BE VK, Mounting: collet sleeve Ø 36 mm Station 5 – Vertical spindle unit Type: BE VK, Mounting: collet sleeve Ø 28 mm Station 6 – Horizontal drilling unit Type: BE VK with additional guide, Mounting: collet sleeve Ø 28 mm Station 7 – Horizontal drilling unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 36 mm Station 8 – Vertical spindle unit Type: BE VK, Power 2.2/3 kW, Mounting: collet sleeve Ø 28 mm Drilling unit feed: mechanical feed via quill Rotary indexing table: mechanically actuated, 8 positions, Ø 500 mm Workpiece clamping: manually operated via collet, Ø 45 mm Machine dimensions (W x D x H): approx. 2,600 mm x 2,400 mm x 2,500 mm Power supply / Connected load: 380 V, 50 Hz Accessories / Special features: • Designed for large-scale production • The machine is equipped with a robust cast machine table with chip removal to the rear and a separate large coolant tank • Extensive range of clamping and auxiliary tools included • The machine features a mechanically switched 8-station rotary indexing table • Coolant system with chip tray • Very robust machine bed – ideally suited for the construction or rebuilding of a special-purpose machine

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1969, Manufacturer: Steinel Model: 6 Station Rotary Indexing Drilling Machine BE 10 VK, BE 6 VK Year of manufacture: 1969 Weight: approx. 3,000 kg Gbsdpfx Agew H I R Rsyoi General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling in small workpieces Drilling units: 7 Station 1 – loading and unloading Station 2 – vertical drilling unit type: BE 10 VK Station 3 – horizontal drilling unit Station 4 – horizontal and vertical drilling unit type: BE 6 VK Station 5 – horizontal spindle unit type BE VK with additional guide, fitting: clamping sleeve Ø 28 mm Station 6 – horizontal drilling unit and vertical tapping unit type: BE 6 VK Feed for drilling units: mechanical feed via quill Drill heads: single-spindle drilling units Rotary indexing table: mechanical indexing with 8 positions Ø 400 mm Workpiece clamping: manual via collet Ø 30 mm Machine dimensions (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / connected load: 380 V, 50 Hz Accessories / Special equipment: • The machine is designed for mass production • The machine features a robust cast iron machine table with chip disposal to the rear and a separate large coolant tank (outlet to the back) • Safety light curtain by Sick • Extensive range of spare parts, spindle units, and rotary indexing tables included • The machine is equipped with a 6-station rotary indexing table • Heavy cast iron machine table, ideal for rebuilding as a special-purpose machine

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1967, Manufacturer: Steinel Model: 5 Station Rotary Transfer Drilling Machine BE 10 VK Year of manufacture: 1967 Weight: approx. 3,000 kg General Information / Technical Data: 5-station rotary transfer special drilling machine for horizontal drilling operations with multi-spindle heads Drilling units: 4 units Station 1 – Loading and unloading Gbodpfxsw H Rh Sj Agyoi Station 2 – horizontal drilling unit type: BE 10 VK Station 3 – horizontal drilling unit type: BE 10 VK Station 4 – horizontal drilling unit type: BE 10 VK Station 5 – horizontal drilling unit type: BE 10 VK Feed of drilling units: mechanical feed via quill Drilling heads: multi-spindle drilling units Rotary indexing table: mechanically indexing in 5 positions, Ø 400 mm Workpiece clamping: hydraulic via centric expanding mandrel, workpiece Ø approx. 80 mm Dimensions of machine (W x D x H): approx. Ø 1,800 mm x H = 2,200 mm Power supply / Connected load: 380 Volt, 50 Hz Accessories / Special Features: • Machine designed for large batch production • Stable cast iron machine table with side chip removal and separate coolant tank • automatic safety guard door • 5-station rotary indexing table • heavy-duty cast iron machine table, ideal for custom rebuilding or retrofitting • machine suitable for refurbishment / rebuild

Stanje: rabljeno, Leto izdelave: 1963, Funkcionalnost: nepreverjeno, Manufacturer: Steinel Model: 6 Stations Year of manufacture: 1963 Weight: approx. 2,500 kg General / Technical Data: 6-station rotary indexing special drilling machine for vertical and horizontal drilling operations on small workpieces Drilling units: 7 units Station 1 – Loading and unloading Station 2 – Vertical drilling unit Station 3 – Horizontal drilling unit Station 4 – Horizontal and vertical drilling unit Station 5 – Horizontal spindle unit Station 6 – Horizontal drilling unit and vertical threading unit Feed of drilling units: mechanical feed via quill Drill heads: single spindle Tool diameter: approx. Ø3 mm to Ø8 mm Workpiece clamping: manually operated via collet chuck Machine dimensions (W x D x H): approx. Ø2,000 mm x H = 2,200 mm Power supply / Connected load: 380 Volt 50 Hz Gsdpfxjwyn S Uo Agyebi Accessories / Special equipment: • The machine is designed for mass production • The machine has a robust machine table with chip disposal to the underside of the table center and a separate large coolant tank • Extensive range of clamping and auxiliary tools • The machine is equipped with a 6-station rotary indexing table