Vodoravni stroj za brušenje površin

MATRA MF 60/30

Stanje: rabljeno, Leto izdelave: 1975, Technical details: Grinding length: 600 mm Grinding width: 300 mm Workpiece height: 450 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Space requirement approx.: 2.8 x 3.0 x 2.0 m Grinding spindle speed: 1440 / 2905 rpm with magnetic chuck 600 x 200 mm automatic vertical feed Gtedpfxjvb Dmls Ab Eow

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, GF AgieCharmilles CUT 300 Year of manufacture: 2013 Charmilles Millenium Control Travel paths (X / Y / Z): 550 x 350 x 400 mm Travel paths (U / V): 550 x 350 mm Maximum taper angle: +/- 30° at 400 mm height Integrated Collision Protection (ICP) on all 5 axes automatic drop-door tank Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Cutting speed: 340 mm²/min Best surface finish: Ra 0.10 µm Available wire diameters: 0.15 to 0.33 mm Gjdjw D Accopfx Ab Eetw Overall system dimensions: 2,600 x 2,600 x 2,340 mm Total system weight: 3,300 kg Once an order is received, the machine will be cleaned, fully overhauled, and tested for all functions by us. A 6-month warranty is provided on the machine. We are also glad to offer machine commissioning services for you.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1315/451, Completely overhauled: Mechanical, geometry, hydraulic, and electrical components (checked and/or replaced) Grinding Wheelhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings, adjustment. New paint. Workhead Disassembly, cleaning of components, replacement of worn or defective parts, motor overhaul, belt replacement. New spindle bearings. New paint. Tailstock Disassembled, inspected and overhauled Hydraulics Disassembly, motor inspection, replacement of hoses, worn or defective parts. Inspection of hydraulic block. X Axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of hydraulic piston, table grinding. Z Axis Disassembly, table grinding, replacement of worn or defective parts, overhaul of hydraulic piston, new paint. Electrical Cabinet Complete inspection, replacement of various relays. Paintwork Colours: White RAL 9003 and Grey RAL 7011 Geometry as per manufacturer's protocol. Inspection and cleaning of various accessories Origin CH Voltage 380 / 50 / 3 Net weight approx. 2200 kg Customs tariff position 8460.2920 TECHNICAL SPECIFICATIONS Centres distance (nominal) 600 mm Maximum centres distance (with protruding headstock) 750 mm Centres height, standard 125 mm Gedpfx Asw U Ry Neb Ejtw Centres height with interchangeable shoes for headstocks 175 => 250 mm Max. workpiece diameter (125 mm centres height) 250 mm Max. workpiece diameter with interchangeable shoes 350 => 500 mm Table swiveling each direction 10° Max. surface grinding length (max. width = 200 mm) 900 mm Table speed, infinitely variable hydraulically 0 - 6 m/min approx. Table reversal dwell time 0-5 s External grinding wheel, diameter – width – bore 400 x 50 x 127 mm Surface grinding wheel 250 x 13 x 76 mm Grinding wheel spindle speed 1500/1700/2200/3600 rpm Wheelhead swiveling 270° With indexing every 90° Vertical movement of wheelhead, centre height 125-350 mm Transversal travel of wheelhead 285 mm Hydraulic rapid feed and return stroke 40 mm Incremental feed of wheel by table reversal 0.001 - 0.03 mm/dia Continuous infeed for plunge grinding 0 - 0.9 mm/dia Micrometric infeed stop, per division 0.001 mm/dia Workhead swiveling 360° Workhead spindle speed, infinitely variable (normal/special), rpm 20-400/10-400 Internal taper of workhead/tailstock 5/3 Morse Wheelhead motor, approx. 4 HP All technical data are given without guarantee and subject to errors or omissions.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Grinding length: 973 mm Centre height: 250 mm Workpiece table max. swivelling range: +6° / -9° Centres: Morse taper 5 (MT5) Grinding headstock max. travel: 100 mm Grinding headstock max. swivel range: +45° / -30° Max. grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Gtedewhp Dnepfx Ab Eew Max. workpiece weight between centres: 400 kg Internal grinding attachment, max. grindable bore: 160 mm Machine weight: approx. 5,000 kg

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 1.050 mm, dolžina pomika po osi Y: 360 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 1.050 mm, pomik osi Y: 360 mm, pomik po osi Z: 500 mm, skupna masa: 3.000 kg, Oprema: dokumentacija / priročnik, Tiger FO 135 Universal Milling Machine Description: Gjdporqwbiefx Ab Eetw The machine was purchased new in 1994 and has only seen minimal hours of operation. The milling machine is fully functional. The axis movements are smooth and the guides are in good condition, featuring an automatic lubrication system. The table is also in very good condition, with barely any signs of wear. The machine is equipped with a digital readout (DRO) for all three axes, allowing for work with tool compensation and repeated measurement processes. Both the machine and the DRO are supplied with operating manuals. Technical Specifications: • Table dimensions: 1,400 x 340 mm, 4 T-slots • Automatic travel: ➢ Longitudinal (X): 1,050 mm ➢ Cross (Y): 360 mm ➢ Vertical (Z): 500 mm • Spindle taper clamping: ➢ Vertical axis: ISO 40, automatic locking ➢ Horizontal axis: ISO 40, manual locking • Spindle speed range: ➢ Vertical axis: 33 to 1,560 rpm, 12 speeds ➢ Horizontal axis: 35 to 1,550 rpm, 12 speeds • Installed drives: ➢ 5 kW vertical spindle motor ➢ 7.5 kW horizontal spindle motor ➢ DC motor, 15 Nm • Infinitely variable feed rate: 0 – 1,500 mm/min • Rapid traverse: ➢ Longitudinal and cross: 3,000 mm/min ➢ Vertical: 1,500 mm/min • Universal head with 80 mm manual quill travel • Automatic lubrication with pump • Low voltage electrical controls on side arm control panel • Star-delta start • Magnetic thermal protection by Siemens • Net weight: 3,000 kg • Machine dimensions (for transport): ➢ Width: 2,300 mm ➢ Depth: 2,900 mm ➢ Height: 2,400 mm Accessories: • Counter supports for cutter arbor • Cutter arbor ø32 mm

Stanje: dober (rabljeno), Magnetic chuck 455 x 170 mm Digital display Gtsdpfotu Il Tox Ab Eew Water tank Dressing device Wet grinding attachment

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Funkcionalnost: popolnoma funkcionalen, Used CNC cylindrical grinding machine Manufacturer: FORTUNA Gtjdsv Eyr Sjpfx Ab Eow Model: T23 S1000 ASW 45 CNC Year of manufacture: 1980

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: nepreverjeno, številka stroja/vozila: XXX,

Stanje: zelo dobro (rabljeno), Leto izdelave: 1970, Model: AR 1000 - Leto izdelave: 1970 – 1991, geometrijsko obnovljen - Stanje: dobro do zelo dobro - Premer brušenja: maks. 350 mm - Dolžina brušenja: 1000 mm - Dolžina potopnega brušenja: 100 mm - Višina konic: 180 mm - Konus konic: 60 MK4 - Dimenzija brusnega kolesa: maks. 500 Ø x 300 Ø x 80 mm - Brušilna glava vrtljiva: +/- 45° - Dimenzije: 3,2 x 1,7 x 1,6 m (D x Š x V) - Potrebna površina: 4,13 x 2,02 x 1,6 m (D x Š x V) Gsdpfx Abjxfvyze Ejtw - Teža: cca 4.300 kg - Obratovalna napetost: 380 V - Moč: 7,5 kW (skupaj 11,6 kW)

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, dolžina brušenja: 650 mm, širina brušenja: 300 mm, premer brusilnega koluta: 160 mm, skupna masa: 2.550 kg, moč: 4 kW (5,44 KM), Brand: CCP - STANKOIMPORT Model: 3E711B Gedpfoqy H Dpsx Ab Ejtw Grinding dimensions: 650x300mm (X, Y) - 320mm (Z) Magnetic table surface: 630x200mm Admissible table load: 150kg Distance from spindle axis to table surface: 80 - 445mm Maximum grinding head travel: 365mm Manual table stroke: (700mm, 250mm) Table travel speed: 2 - 30 m/min Cross feed speed: 0.01 - 1.5 m/min Vertical feed graduation: 0.002mm Micrometric vertical feed graduation: 0.0005mm Cross feed graduation: 0.5mm Micrometric cross feed graduation: 0.001mm Cross movement per handwheel revolution: 5mm Vertical movement per handwheel revolution: 0.20mm Automatic cross feed during longitudinal table travel: 0.2 - 30mm Automatic feed for grinding head: 0.002 - 0.08mm Grinding wheel dimensions: 250x76x40mm Minimum wheel diameter: 160mm Spindle motor: 4kW Weight: 2550 kg.