Dexion Speedlock P90 4.000 X 1.100 Mm / Tip M / P90X75X1,80 Mm nakup rabljenega (121.895)

Stanje: dober (rabljeno), Tehnični podatki za prečno nosilko paletnega regala: Sistem regala: Bito Tip: PL 38 Vključeno v dobavo: 01x rabljena prečna nosilka paletnega regala Barva materiala: modra Profil okvirja: 110 x 50 mm Tip prečne nosilke: PT27.112LN Sponka: 3 HK (kavelj) Razpon: 2.700 mm največja obremenitev na par prečnih nosilk: 3.000 kg, pri enakomerno porazdeljeni obremenitvi 02x rabljeni varnostni zatiči Izvedba: popolnoma pocinkano Nwedpfjzwviaox Andsk Za varovanje vzdolžnih nosilcev pred nenamernim dvigom Vaše kontaktne osebe v našem podjetju: Gospod: Andre Evering Gospod: Mario Klöver Gospod: Falk Deutsch Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Morebiten dodatni transport ali pošiljanje tega izdelka je povezano z dodatnimi stroški, ki jih je mogoče preveriti pri nas glede na kraj dostave oziroma obseg dostave.

Stanje: novo, številka stroja/vozila: 190040019, Inclined conveyor (4,000 x 390 mm) Nwjdpfstvfb Nex Andsk Inclined conveyor with direct drive and PU/PVC belt

Stanje: dober (rabljeno), Vsebina paketa vključuje: 1x globoki okvir, rabljen Barva materiala: pocinkano jeklo (Sendzimir) Skupna dolžina: približno 1.250 mm za globino police: 1.200 mm razdalja med oporniki: približno 1.100 mm podpora za prečke: približno 50 mm kot podpore: L: približno 80 x 80 mm skupna širina: približno 860 mm notranja širina: približno 855 mm debelina materiala: približno 3 mm Bočni okvir: Njdpfx Aner Dr Sujdjwk dolžina: približno 1.245 - 1.070 mm spredaj se poševno zožuje širina: približno 200 mm višina: približno 195 mm Končni omejevalnik: širina: približno 200 mm višina: približno 195 mm Vaše kontaktne osebe v našem podjetju: gospod: Andre Evering gospod: Mario Klöver gospod: Falk Deutsch Splošne informacije o izdelku: Izdelek je rabljen, zato so lahko prisotne praske, udrtine in znaki uporabe. Ta izdelek je na voljo samo za osebni prevzem. Dodatni stroški transporta ali pošiljanja tega izdelka bodo zaračunani ločeno. Cene se razlikujejo glede na kraj dostave ali vsebino paketa, zato nas kontaktirajte za podrobne informacije.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) Nwsdpfx Aomhh Dhendok - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. Nwjdpfx Anemhhx Isdjk According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Nwsdpfx Ansmhh Anjdek Scope of delivery: - 4 rack uprights, height 3,000 mm, each with base section 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Fastening materials (bolts, nuts, and washers) - Delivery time approx. 1 week - No damaged parts! - Spare parts available and extensions possible at any time - Bulk offer available: approx. 40 uprights in stock Detailed description: - Sturdy steel construction made from IPE sections (bolted system) - Surface hot-dip galvanized - Rack height: 3,000 mm - Load capacity per upright: 2,250 kg - Base section and cantilever arms both 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - With assembly instructions and load capacity labels C4 as per DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with advance delivery notification. Materials are packed efficiently for easy unloading. For outdoor installation, load capacities are reduced to account for wind and snow loads. The subfloor must be concrete, level, suitable for bolt anchors, and able to bear the applied loads. Floor condition, load capacity, and any required official permits must be checked and ensured by the customer. Racking uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to trade association guidelines, it is recommended that uprights project at least 500 mm above the uppermost storage level.

Stanje: dober (rabljeno), Technical data for shelf connector: Shelving system: Dexion Type: P 90 Nedpfsi Dfmljx Andswk Scope of delivery includes: 01x shelf connector, used For shelf spacing: 300 mm Cross-section: U 50x25 mm Material finish: sendzimir galvanized Weight: 0.33 kg | each

Stanje: dober (rabljeno), Technical data for the racking connector: Racking system: Dexion Type: P 90 Included in the scope of delivery: 01x Racking connector, used for racking distance: 900 mm Nodpsi Dfmtefx Andjwk Cross-section: U 50x25 mm Material finish: Sendzimir galvanized Weight: 1.01 kg | each

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Racking Used: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Njdpfomhh Dzex Andswk Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height: 2,600 mm - Load capacity per upright: 1,800 kg - Base and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and C4 load capacity plates according to DIN standards - Technical telephone support - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are produced exclusively in Germany. We offer reliable shipping with advance notification before delivery. The material is packed in a way that allows for easy unloading. When installing outdoors, loading capacities are reduced due to wind and snow loads. The base must be concrete, level, and suitable for dowels, and capable of bearing the imposed loads. The floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall fixing is neither necessary nor recommended. According to professional association guidelines, it is recommended that rack uprights have an overhang of at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm Nodpfx Anomhhyajdswk - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing Nedpfx Aemhhypjndowk - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Deep beam, used Material finish: Sendzimir galvanized Total length: approx. 1,110 mm Suitable for frame depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: C 70 x 50 x 15 mm Nwsdpfsld S Ufjx Andjk Beam support width: approx. 50 mm Weight per piece: approx. 3.02 kg

Stanje: dober (rabljeno), Technical Data for Pallet Racking Frame: Racking System: Nedcon Type: NS Included in delivery: 01x pallet racking frame, used Color: cream white Frame profile: 1007825 Nwjdpfx Aov N E H Asndok Profile dimensions: 100 x 78 x 2.5 mm Adjustable pitch: 50|50 mm including horizontal and diagonal bracing, base plates The frames are pre-assembled (bolted latticework) Frame height: 9,000 mm Frame depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required beyond this, additional costs will apply, which can be requested from us depending on the place of delivery and the scope of delivery.

Stanje: zelo dobro (rabljeno), Technical Data for Order Picking Rack: Rack System: Dexion Type: HI280 Technical Data for Installation: Number of rack rows: 01 pc. Rack length: approx. 1,340 mm Number of bays / rack row: 01 pc. at 1,290 mm Number of levels incl. ground level: 06 pcs. Note: The advantage of a packing table or an order picking rack is that all the required tools and accessories necessary for assembling the product are always within easy reach. Scope of delivery includes: 02x shelf uprights, used Material color: Sendzimir galvanized Frame profile dimension: 50 x 55 mm Adjustable pitch: 25 mm incl. horizontal and diagonal braces Nwedpfx Aon Smvhondek Weight / pc.: approx. 5.50 kg Uprights are pre-assembled 1,200 mm high 610 mm deep 06x shelf panels, used Material color: Sendzimir galvanized Dimensions: 1,275 x 575 x 30 mm Weight / pc.: approx. 4.37 kg Max. load per shelf with evenly distributed weight: 100 kg 04x leveling plates, new Type: HI280 U-PL. STD 42X50X1.2 VZ Material color: Sendzimir galvanized 06x shelf beams, used Total length: 1,275 mm Z-profile: 50 x 25 mm Number of hooks: 02 pcs. Weight / pc.: approx. 0.84 kg Material color: Sendzimir galvanized 48x picking bins, used Manufacturer: SSI Schäfer Box designation: LF 511 G ZW External dimensions LxWxH: 500x156x143 mm Internal dimensions LxW: 448 x 123 mm Weight / pc.: approx. 0.785 kg 01x load sign with specifications for bay and shelf load, manufacturer, and order number Dimensions: 297 x 210 x 2 mm Note: As this is used equipment, damages, corrosion or similar defects may be present. General information about the item: This item is offered for collection only. If additional transport or shipping of this item is required, extra costs will be incurred, which can be requested from us depending on the delivery location and scope.

Stanje: dober (rabljeno), Belt conveyor, conveyor belt, transport belt, belt conveyor system, flat belt conveyor Nwedpjvazpujfx Andok - Belt Conveyor: Belt conveyor on a solid base frame with feed hopper - Speed: 3.4 / 6.6 m/min - Belt width: 190 mm - Conveyor length: 745 mm - Drive: VEM 0.14 / 0.25 kW, see type plate in photo - Transport dimensions: 460 / 1255 / H1185 mm - Weight: 149 kg

Stanje: skoraj kot novo (rabljeno), 4.000 m² skladiščna platforma Nedcon Razpored stebrov 800 cm x 600 cm! Rabljen artikel, vrhunsko stanje, kot nov, glejte slike. Višina zgornjega roba platforme 370 cm. Nosilnost 500 kg/m². Na voljo so različne vrste talnih oblog. Na voljo je dovolj dvigal za tovor, stopnic, ograj in dodatne opreme. Možno CAD načrtovanje in montaža. Možen delni nakup. Cena po dogovoru: na zahtevo! Izdelek je na zalogi. Transport in montaža sta možna na zahtevo. Ogled je možen kadarkoli po dogovoru. Dodatne informacije so na voljo na zahtevo. Stalno imamo na zalogi več kot 5000 tekočih metrov paletnih regalov od številnih proizvajalcev. (Pridržujemo si pravico do sprememb in napak v tehničnih podatkih, specifikacijah in cenah ter do morebitne predčasne prodaje! Glejte naše splošne pogoje, vse cene so brez DDV, iz skladišča.) Lenox Trading – vrhunska skladiščna tehnika in regalni sistemi za težke obremenitve, rabljeni in novi. Opis: Iščete visokokakovostne skladiščne regale za nakup? Lenox Trading je s približno 100 lastnimi zaposlenimi eden največjih trgovcev z novo in rabljeno skladiščno tehniko v celotnem območju DACH (Avstrija, Nemčija, Švica). ⚡ TAKOJ NA VOLJO: • Več kot 10.000 tekočih metrov regalov, takoj dostavljivih. • 20.000 m² skladiščnih in jeklenih platform, takoj na voljo. • Tedensko 30–50 vlačilcev s tovorom, za največjo izbiro. 📦 NAŠA PONUDBA (UGODNO KUPITE SPLETU): Ne glede na to, ali kupujete paletni regal, regal za težke obremenitve, visoke regale, regale za navadne police, regale za pnevmatike ali regale za IBC-kontejnerje – dostavljamo in montiramo po vsej Evropi z našo LASTNO ekipo! Vključno z CAD načrtovanjem, transportom, demontažo in montažo. 🏭 VRHUNSKE BLAGOVNE ZNAMKE, RABLJENE IN IZ LIKVIDACIJE/KONKURSA: • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (tip MPB, tip E, regal za težke obremenitve Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Regali s konzolnimi rokami (Elvedi Kragarmregale, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 NAŠA DRUGA OSNOVA: SPLETNE AUKCIJE IN LIKVIDACIJA Pri delih demontaže in čiščenja ponujamo celovito rešitev: 1. Paketno odkupovanje: Odkupovanje blaga, opreme in celotnih skladiščnih zalog, vključno z popolnim čiščenjem. Nwsdpfx Anohzxagedok 2. Komisijska dražba: Izvedba dražb po naročilu. Naše storitve s pomočjo lastnih zaposlenih: katalogizacija, priprava pisarn, ogled, izročitev blaga, logistika, demontaža in popolno čiščenje. Ne glede na to, ali ste najprej izvedeli za nas zaradi regalov za težke obremenitve, ali pa iščete pocinkane regale za težke obremenitve / regalski sistem za težke obremenitve – zagotavljamo najboljše pogoje. Kontaktirajte nas za neobvezno ponudbo!

Stanje: rabljeno, Rabljen filtrirni preš za bistrenje proizvajalca Seitz Orion, tip OF 100/150, izdelan iz nerjavečega jekla. Preš ima 154 filtrirne plošče iz nerjavečega jekla z dimenzijami 1000 mm x 1000 mm in dve končni plošči. Filtracijska površina je približno 310 m2. Hidravlično zapiranje. Preš je nameščen na okvir iz nerjavečega jekla. V kompletu z napravo so dovodni priključki, manometri in lokalna nadzorna plošča. Specifikacije: Material: Nerjaveče jeklo Nodpfx Anjyi Eygodswk Velikost plošč: 1000 mm x 1000 mm Število plošč: 154 filtrirnih plošč iz nerjavečega jekla Oči: 4 Tip plošč: Bistrilne Filtracijska površina: 310 m2 Zapiranje: Hidravlično

Stanje: dober (rabljeno), prosta razpetina: 1.400 mm, skupna dolžina: 7.510 mm, višina police: 1.750 mm, Technical data for the pallet racking system: Racking system: Stow Type: Pal Rack NS Technical data for assembly: Number of rack rows: 01 unit Length per rack row: approx. 7,510 mm Number of bays per rack row: 05 units, each 1,400 mm Number of levels incl. ground level: 02 units Scope of delivery includes: 06x pallet rack frames, used Colour: RAL 5015 sky blue Frame type: PNFB12 Profile dimensions: 85 x 65 x 1.75 mm Incl. horizontal and diagonal braces, footplates Frames are pre-assembled (bolted truss construction) Height: 1,750 mm Depth: 1,100 mm 20x pallet rack beams, used Nwsdpfx Asw I R Sljndsk Colour: orange U-profile: 150 x 50 x 3.00 mm Connector: 4-hook (HK) Design: Head beam Clear bay width: 1,400 mm 40x safety pins, used Colour: sendzimir galvanized To secure the cross beams against unintentional lifting 24x anchor bolts, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: carbon steel, galvanized Approved for: cracked concrete 12x levelling plates, used Design: fully galvanized For levelling frames installed on uneven floors 01x load sign With information on bay and shelf loads, manufacturer and job number Dimensions: 420 x 297 x 3 mm General information about the item: This item is offered for collection only. If additional transport or shipping is required, extra costs will apply. These costs can be requested from us depending on the delivery location and scope of delivery.

Stanje: dober (rabljeno), Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of racking rows: 01 pc. Length per racking row: 9,845 mm Number of bays per racking row: 05 pcs. Number of levels plus ground level: 02 pcs. Technical data for capacity: Pallet positions per bay: 06 pcs. Number of pallet positions per row: 30 pcs. Total number of pallet positions: 30 pcs. Included in delivery: 06x Pallet rack uprights, used Material finish: Sendzimir galvanized Frame profile: 120 x 69 x 1.75 mm Incl. horizontal and diagonal bracing, footplates Uprights pre-assembled (bolted truss) 2,000 mm high 1,100 mm deep 20x Pallet rack beams, new Material color: RAL 2001 orange Beam type: TB-S 100 Box profile: 100 x 50 mm Clear span: 1,825 mm Max. load per pair of beams: 2,000 kg with evenly distributed load 40x Integrated safety pins, new For securing beams against unintended lifting 24x Wedge anchors, new Manufacturer: Hilti Model: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete Nwodjvzam Ijpfx Andjk 12x Shims, used Design: fully galvanized For leveling uprights installed on uneven floors 01x Load sign With specifications for bay load and shelf load, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Delivery or shipment of this item is subject to additional costs, which can be requested from us separately depending on destination or scope of delivery.

Leto izdelave: 2021, stanje: dober (rabljeno), Technical data for pallet rack beam: Racking system: Feralco Year of manufacture: 2021 Included in delivery: 01x pallet rack beam, used Colour: RAL 2004 orange Box profile: 80 x 50 mm Beam type: 80 E15 Connector: 3 HK (hooks) Clear span: 2,700 mm Max. load per pair of beams: 1,500 kg, with evenly distributed load Nsdpfx Ansk It Tnsdewk 02x locking pins, used Version: fully galvanised To secure the beams against accidental lifting

Leto izdelave: 2024, stanje: novo, Machine dimensions: • (L x W x H) 5,240 mm x 3,600 mm x 2,400 mm • Width with console: 7,700 mm • Length with filter: 11,000 mm Technical details: • Max. sheet size: 4,000 x 2,000 mm • Cutting speed: 12 m/min • Positioning accuracy: ± 0.1 mm Nwsdpfjdyfwkjx Andjk • Repeatability: ± 0.1 mm • Power supply (Hypertherm XPR 170 XD Optimix): 170 A • Cutting capacity: ◦ Unalloyed steel, piercing, argon: 40 mm ◦ Unalloyed steel, piercing, air: 35 mm ◦ Unalloyed steel, straight cut: 60 mm ◦ Alloyed steel, piercing: 22 mm ◦ Alloyed steel, straight cut: 38 mm ◦ Aluminium, piercing: 25 mm ◦ Aluminium, straight cut: 38 mm Standard equipment: • Controller: Durma Aurora CNC controller • Truehole standard • Sheet measurement via laser • Torch height control • AC servo motors for X and Y axis • Software: Lantek or Metalix CAD/CAM software with autonesting • 50 pre-programmed part geometries for easy and quick customization • Consumables kit (torch nozzles, etc.) • Plasma torch • Ignition console • Remote control: Remote maintenance Options included: • Hypertherm XPR 170 XD + Optimix + automatic gas control • Filter for HPR 170 XD • Safety system with perimeter safety wire • Oxy-fuel torch with sensor • Plasma torch breakaway system • Air dryer

Stanje: dober (rabljeno), Included in the scope of delivery: 01x Holder for push-through safety device, used Material finish: Sendzimir galvanized Manufacturer: SLP Leg A: approx. 200 x 140 mm Leg B: approx. 200 x 38 mm Opening dimension: approx. 52 x 32 mm For rectangular tube: 50 x 30 mm Nwedpfxoipuggs Andjk Weight per unit: 0.930 kg

Leto izdelave: 1979, stanje: zelo dobro (rabljeno), 4 x freestanding aluminium silos on base ring, year of manufacture 1979 – used – designed for a specific gravity of 0.6 Nwsdpfxjf D Hv Ij Andsk Capacity approx. 53,000 liters Diameter approx. 2,400 mm Total height approx. 14,250 mm Weight approx. 1,410 kg Documentation: yes, drawings available Tank with upper conical bottom and lower 60° cone Connections: On top: 1 flange nozzle DN 80 for filling 1 flange nozzle DN 100 On shell: 1 manhole DN 500 2 sockets 1 ½” The cone ends in a DN 150 flange. Other details as per drawing and photos. The silos have already been dismantled and can be inspected at any time in 76694 Forst.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, 2 x aluminijasta silosa z dolgo podporno nogo + filtrska hiša, ø 3.000 mm, zasnovano za specifično težo 0,6 kg/dm³ Proizvajalec: Zeppelin Prostornina: cca 80.000 l Premer: cca 3.000 mm Skupna višina: cca 16.000 mm Teža: cca 2.000 kg Specifična teža: 0,6 kg/dm³ Priključki in povezave: Na zgornjem dnu: 1 x dvigovalno uho V filtrski hiši: 1 x okvir filtra, cca 900 x 1.000 mm z odzračevalnim nastavkom 1 x revizijska odprtina DN 600 3 x priključek za regulacijsko/merilno tehniko (vključno s silopilotom, min-max prikazovalnikom in dodatno merilno sondo) Na plašču: 1 x dostopna vrata z zapiralom do filtrske hiše 1 x servisna vrata (konus) 1 x signalna luč Različne odprtine za polnilne cevi Nwodpfxjgh Dgbe Andek Silo se konča s 60° stožcem. Oba silosa sta opremljena z dvojnimi lestvami z zaščito proti padcu.

Stanje: dober (rabljeno), Tehnični podatki za prečno nosilko za paletne regalne sisteme: Regalni sistem: Galler Tip: Omega Vsebina paketa: 01x prečna nosilka za paletni regalni sistem, rabljena Barva materiala: siva IPG-profil: 85 x 65 mm Sponka: 5 HK razdalja med nosilcema: 2.100 mm 02x varovalni zatič, rabljen Barva materiala: pocinkano (Sendzimir) Za varovanje vzdolžnih nosilcev pred nenamernim dvigom Nsdpfx Aozwpdksndjwk Opomba: Prečne nosilke imajo na levi in desni strani, na sponki, nameščeno ploščo za pritrditev diagonalnih povezav! Vaši kontaktni partnerji v našem podjetju: gospod: Andre Evering gospod: Mario Klöver gospod: Falk Deutsch Splošne informacije o izdelku: Ta izdelek je na voljo samo za osebni prevzem. Dodatni transport ali pošiljanje tega izdelka je povezano z dodatnimi stroški, ki jih lahko zahtevate ločeno glede na kraj dostave oz. obseg dostave.