Mikron Wf 3 nakup rabljenega (193)

Stanje: zelo dobro (rabljeno), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Gujdpfx Ahslnfggs Djh Rapid traverse in all feed directions: 3000 mm/min Motor Torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X axis): Automatic: 400 mm Cross travel of the clamping table (Y axis): Automatic: 400 mm Vertical travel of the clamping table (Z axis): Automatic: 385 mm No guarantee for the correctness, completeness or up-to-dateness of the information provided.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, 1 used tool milling machine Manufacturer: Mikron Model: WF 2/3 DP Equipped with Heidenhain Type 135 path control Travels (X/Y/Z): 400/410/400 mm Clamping table surface: 800 x 450 mm Spindle speed range: 30 – 2240 rpm Feed rates: 1 - 750 mm/min Rapid traverse: 2000 mm/min Tool holder: ISO 40 Machine weight approx.: 1.4 t Required space approx.: 2.1 x 1.6 x 2.2 m Gujdev N Dzfepfx Ah Doh

Stanje: rabljeno, Leto izdelave: 1980, x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Infinitely variable feeds: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Guedpfx Ascxxq Dsh Djh Space requirement approx.: 2.1 x 1.6 x 2.2 m Equipped with Heidenhain TNC 131 control, swiveling device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping for all axes, the working axis is automatically released, and for manual operation all axes can be released.

Stanje: rabljeno, Leto izdelave: 1985, X-axis travel: 500 mm Gusdjtv Ia Tjpfx Ah Dsh Y-axis travel: 500 mm Z-axis travel: 350 mm Table size: 800 x 450 mm Spindle taper: ISO 40 Quill stroke: -- mm Feeds – longitudinal & cross: -- mm/min Feeds – vertical: -- mm/min Max. spindle speed: 3,150 rpm Supply voltage: 380 V / 50 Hz Drive power: 4 kW Machine weight approx. 1.7 t Space requirement approx. 2.5 x 2.3 x 2.0 m Control: HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,

Stanje: rabljeno, Leto izdelave: 2000, obratovalne ure: 10.000 h, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, Ta 3-osni univerzalni rezkalni stroj Mikron - UM600 se draži na naši spletni industrijski dražbi / dražbi strojev – čiščenje in prestrukturiranje strojnega parka strojne proizvodnje. Guodjxnp Tyepfx Ah Dsh

Stanje: dober (rabljeno), Univerzalni orodjarski rezkalni stroj Mikron WF2SA Letnik izdelave cca 1990 Heidenhain Activ – digitalni prikazovalnik TNC 114 Brezstopenjski pomik Strojna svetilka Hladilna naprava Strojne noge Pomiki: X 420 mm Y 250 mm Z 345 mm Hitrost vrtenja 50 - 2240 min⁻¹ Guedpfoxlq N Dox Ah Djh Vpenjalna površina 635 x 250 mm Pomik v 3 oseh 0 - 750 mm/min Hitri pomik v 3 oseh 1400 mm/min Vpenjanje ISO 40 Vertikalno/horizontalno konico je možno izvleči Centralno mazanje Dimenzije cca 1,2 x 1,2 x 1,6 m Teža cca 1200 kg Stroj je v dobrem, popolnoma delujočem stanju. Na zahtevo lahko pošljemo videoposnetke merjenja geometrije. Na Y osi so bila vgrajena nova oljna stekla. Povratna zračnost X osi: 0,1 mm Povratna zračnost Y osi: 0,15 mm Povratna zračnost Z osi: 0,3 mm Cena brez DDV, prosto natovorjeno iz skladišča

Stanje: rabljeno, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine no. 440911 Year of manufacture: approx. 1985, Overhauled and control system retrofit in 11/2000 Guodpow A Af Iofx Ah Doh Travel paths X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min.; Z = 4000 mm/min. Quill stroke 100 mm Main spindle drive 4 and 5 kW Mains connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - Heidenhain TNC 310 CNC path control, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gearbox steps - Vertical milling head swivels right and left - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours (readout) - Control cabinet fixed to the machine rear - Coolant system in machine base - Swiveling operator panel - Electrical diagram, operator's manual for the control system available Required space (L x W x H) 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Stanje: dober (rabljeno), Stroj na voljo v 15 dneh. Vertikalni 5-osni obdelovalni center MIKRON WF 41C. CNC Heidenhain 426. Magazin za 16 orodij. Dolžina mize: 500 mm. Širina mize: 1000 mm. Največja hitrost vretena: 4000 rpm. Moč motorja vretena: 4000 kW. V delujočem stanju. Gujdjxl Htfopfx Ah Djh

Leto izdelave: 1987, Stanje: rabljeno, številka stroja/vozila: 152.41.74.002, Table clamping surface: 500 x 1000 mm Travel (X-axis): 630 mm Travel (Y-axis): 500 mm Travel (Z-axis): 460 mm Quill stroke (manual): 45 mm Spindle taper: ISA 40 Spindle speeds: 31.5 - 3150 rpm Feed rate, steplessly adjustable: 1 - 3000 mm/min Rapid traverse: X/Y 6 m/min, Z 4 m/min Electrical connection: 380 V, 6/8 kW Guedpfx Aj H I Hdsh Dsh Space requirement: 1800 x 2120/2600 x 2020 mm Weight: 3100 kg Control: HEIDENHAIN, TNC 155

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), X-axis travel: 560 mm, Y-axis travel: 500 mm, Z-axis travel: 400 mm. Vertical clamping table dimensions: 300 x 450 mm. Number of threaded holes: 2 x 6. Threaded hole spacing: 45 mm. Thread: M16. Angular table clamping surface: 460 x 800 mm. Number of T-slots: 7. T-slot spacing: 63 mm. T-slot width: 14 mm. Max. workpiece weight (recommended): 350 kg. Guedsxcxz Nopfx Ah Djh Milling spindle drive: Number of working spindle speeds: 21. Speed range (geometrically stepped): 40–4000 rpm. Step progression: 1.259. Spindle motor power: 3.3 / 4 kW. Tool holder: ISO 40 / M16 with draw-in slot. Vertical quill stroke: 90 mm. Stepless feed adjustment on all 3 axes: 2–3000 mm/min. Rapid traverse X-axis and Y-axis: 6000 mm/min. Rapid traverse Z-axis: 4000 mm/min. Feed motor torque longitudinal and transverse: 3.5 Nm each. Feed motor torque vertical: 7 Nm. Control: Heidenhain TNC 407. Connected load: 8.7 kW. Length: 3705 mm. Width: 2430 mm. Height: 3100 mm. Machine weight with vertical milling head and angular table: 2410 kg. Crate base weight: 170 kg. Shipping crate weight: 400 kg. Operating hours: 18,924 h. Accessories: 3D probe, 20 tool holders, splash guard enclosure, coolant pump, work light, electronic handwheel, machine documentation. An on-site inspection is possible.

Stanje: rabljeno, Leto izdelave: 2000, Ta 3-osni univerzalni rezkalni stroj Mikron UM600 se prodaja na spletni industrijski dražbi / dražbi strojev: strojno podjetje – racionalizacija strojev in prestrukturiranje. Gusdpfx Aoxlhqxjh Deh

Stanje: zelo dobro (rabljeno), Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 400 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 2.240 obr/min, hitrost vretena (min.): 30 obr/min, skupna višina: 1.750 mm, skupna širina: 1.790 mm, skupna dolžina: 1.375 mm, širina mize: 450 mm, dolžina mize: 800 mm, skupna masa: 1.450 kg, Rezkalni stroj je priključen na omrežje in ga je mogoče po dogovoru ogledati. Zelo dobro stanje. Dodatki: 10 kosov nosilcev za orodje SK 40, 1 kos hidravličnega strojnega primeža, z Heidenhain krmiljenjem poti. Gujdpfxjxbtaqo Ah Deh

Stanje: dober (rabljeno), Leto izdelave: 2011, obratovalne ure: 25.800 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.020 mm, pomik osi Y: 560 mm, pomik po osi Z: 600 mm, skupna višina: 2.270 mm, skupna dolžina: 3.300 mm, skupna širina: 3.100 mm, največja hitrost vrtenja: 16.000 obr/min, skupna masa: 6.500 kg, For sale is a 3-axis CNC milling machine manufactured by Mikron, model VCE 1000 Pro. The machine is in excellent condition, very well maintained, fully functional, and ready for immediate use. The offer includes a mountable 4th axis from Lehmann. The machine has recently received new guides and a ballscrew on the X axis, as well as an overhauled StepTech spindle (unused since overhaul). Technical specifications: Control: Heidenhain iTNC530 Year of manufacture: 2011 Control on: 25,800 h Machine on: 24,000 h Spindle: FULLY OVERHAULED Travels X, Y, Z: 1020, 560, 600 mm Max. spindle-table distance: 735 mm Drive type: Inline motor spindle Max. speed: 16,000 rpm Rapid traverse X, Y: 36 m/min Rapid traverse Z: 24 m/min Tool holder: SK 40 Max tool length: 305 mm Max tool diameter: 77/115 mm Worktable: 1000 x 560 mm Max table load: 1350 kg Coolant tank capacity: 300 l Dimensions: 3300 x 3010 x 2270 mm Weight: 6,500 kg Integrated band filter unit Chip conveyor IKZ (internal coolant supply) 4th axis by Lehmann Transport and loading can be organized Europe-wide upon request and for an additional fee. Prices plus VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Trade-in or exchange possible! Machinery purchase/sale Gusdpfx Ajv Tlf Hsh Djh BUYING/SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or wish to sell yours? For further information or contact options, please visit our website.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Heidenhain TNC 114 Digital Readout and Infinitely Variable Feed Technical Data: >> Year of construction: approx. 1990 >> Fixed angle table, clamping surface 800 x 450 mm >> Spindle speed: 50 - 2240 rpm >> Infinitely variable feed in 3 axes from 1-750 mm/min >> Rapid traverse in 3 axes: 1400 mm/min >> Travel X/Y/Z: 500/500/380 mm >> Vertical quill - SK40 extendable >> Weight: approx. 1600 kg Gujdpjw Ni Riofx Ah Deh Accessories and Equipment: >> 3-axis active digital readout, Heidenhain TNC 114 >> Central lubrication >> Operating instructions, programming manual, electrical diagrams About the Machine: For sale is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain TNC 114 path control, meaning it can execute programmed travel distances in any one of its axes—X, Y, or Z—and automatically stop after reaching the set position. Up to four different reference points can be set. Dimension inputs can be made as either absolute or incremental values. The feed rate is infinitely variable from 0–750 mm/min and can be adjusted during operation; rapid traverse can be engaged at the press of a button. The spindle speed can be set in steps from 50 to 2240 rpm, but only when the machine is at a standstill. The vertical milling head is secured with three screws and can be removed or reattached within just 2 minutes. It is manually fixed and swung aside using the articulated arm visible on the left side of the machine. A key advantage of this machine is the generous travel distances in relation to its overall size: Z = 380 mm, X = 500 mm, and Y = 500 mm. Additionally, the machine features electronic protection for the vertical spindle. The machine has been mechanically and electrically tested. Take advantage of the opportunity to view and test this machine under power at our facility.

Stanje: rabljeno, TECHNICAL DATA - Table dimensions: 350 x 800 [mm] - T-slots: 7 Guodpfxsuhbxao Ah Djh - Travel (X, Y, Z): 400, 400, 370 [mm] - Spindle speed: 50 - 2240 [rpm] - Rapid traverse speed with potentiometer: 0 - 630 [mm/min] ACCESSORIES - 3-axis HEIDENHAIN digital readout - Chip guard

Stanje: rabljeno, Hmotnosť bez zaťaženia: 2 000 kg Rozmery (d x š x v): 245 x 210 x 186 cm - Digitálny displej: Áno - Typ digitálneho displeja: Heidenhain TNC 114 - Počet osí: 3 - Pojezd v osi X [mm]: 560 - Pojezd v osi Y [mm]: 500 - Pojezd v osi Z [mm]: 560 - Min. otáčky vretena [ot./min]: 40 - Max. otáčky vretena [ot./min]: 4 000 - Rozhranie: ISO 40 - Rozmer stola dĺžka [mm]: 750 - Rozmer stola šírka [mm]: 425 - Dokumentácia k dispozícii: Áno - Typ riadenia: Heidenhain TNC 114 - Riadenie: CNC - Prepravné rozmery: 2450 mm x 2100 mm x 1860 mm (d x š x v) - Prepravná hmotnosť [kg]: 2 000 kg Finančné informácie DPH: Uvedená cena je bez DPH DPH/režim rozdielu: DPH odpočítateľná pre podnikateľov Doručenie a výkup kedykoľvek možné pre všetky priemyselné zariadenia Gujdpfjwnhqtex Ah Dsh Lukas van Rossum

Stanje: rabljeno, Control: Heidenhain TNC 155 Tool holder: SK 40 Quill stroke: 110 mm Table size: 1000 x 500 mm Travels: X-710, Y-500, Z-460 mm Gedec Tt Hropfx Ah Deuh Spindle speed: 31.5–3150 rpm Accessories: Swivel table, coolant system, various tool holders

Stanje: pripravljen za uporabo (rabljen), Spindle speed: 3,150 rpm, Travel path X/Y/Z: 710 mm / 500 mm / 500 mm, Number of spindle speeds: 21, Feed rate: 2,000 mm/min, Spindle taper: ISO40/M16, Distance from milling head to table: 559 mm, Table dimensions X/Y: 500 mm / 1,000 mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Dimensions X/Y/Z: approx. 2,700 mm / 2,300 mm / 2,200 mm, Weight: approx. 3,300 kg, Control: Heidenhain TNC 155. Documentation available. Gusdpfetuwk Uex Ah Djh

Stanje: dober (rabljeno), Leto izdelave: 1996, potovalna razdalja osi X: 710 mm, pomik osi Y: 630 mm, pomik po osi Z: 500 mm, hitrost vretena (min.): 5 obr/min, največja hitrost vretena: 5.000 obr/min, For sale: Machining centre from Mikron, model UMS 710-900 The machine is in good condition. New ball screw drives for X and Y axes, new cover for Z axis, and new Z-axis spiral. Gusdett Acgspfx Ah Djh Technical specifications: - X travel: 710 mm - Y travel: 630 mm - Z travel: 500 mm - CNC control: TNC 355 HEIDENHAIN - Table size: 1200 x 600 mm - Max. table load: 500 kg - Spindle taper: SK 40 with clamping groove - Spindle speed range: 5 - 5000 rpm - Spindle drive power: 11 kW - Feed rate: 0 - 10,000 mm/min - Rapid traverse: 10 m/min - Operating voltage: 400 V - Total power requirement: 15 kW - Machine weight approx.: 5.0 t - Dimensions approx.: 2.40 x 3.40 x 2.30 m - Chip tray - No internal coolant supply (IKZ) - 44-position tool changer - Handwheel First fill with operating fluids upon request possible. If required and at additional cost, loading and transportation (throughout Europe) can be organised. Prices are subject to VAT. Viewing possible by appointment. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or contact details, please inquire.

Stanje: rabljeno, Leto izdelave: 1986, obratovalne ure: 66.247 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, Stroj je v dobrem stanju in še vedno v obratovanju. Leto izdelave: 1986 Hodi: X 600 / Y/Z 500 Obratovalne ure: 66.247 h Opombe: - Cena NE vključuje dodatne opreme! - Odhod organizira kupec, s prevzemnega mesta. - Datum prevzema se določi po dogovoru s prodajalcem. Gjdowccfhepfx Ah Dsuh - Brez garancije - Plačilo vnaprej (račun) ali gotovinsko ob prevzemu

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Guodpfxsu U Sabs Ah Doh Total power requirement 2.6 kW Machine weight approx. 1.5 t O F F E R We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under V-spindle approx. 65 – 445 mm Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!

Leto izdelave: 1988, Stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 710mm/500mm/460mm, table dimensions X/Y: 1000mm/500mm, max. table load: 500kg, tool holder: SK40, spindle speed: 4000rpm, machine dimensions X/Y/Z: approx. 2000mm/2600mm/2250mm, weight: approx. 3400kg, control system: Heidenhain TNC 355, operating hours: approx. 34,000h. Includes coolant system, complete work area enclosure, approx. 34x SK40 tool holders, carriage and shafts for gear hobbing. Documentation available. On-site inspection possible. Guedpfx Ahov Sct So Deh

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 450 mm, For sale is a machining center from Mikron, model UM 600. The machine is in good condition and ready for immediate use. Technical Data: Year of manufacture: 1997 Travel X: 600 mm Travel Y: 500 mm Travel Z: 450 mm Clamping surface: 900 x 530 mm Maximum table load: 300 kg Control system: Heidenhain TNC 426 Tool holder: SK 40 Max. spindle speed: 6,300 rpm Rapid traverse X / Y / Z: 15 m/min No tool changer installed; instead, a support arm for conversion of the milling head is mounted (see picture 4). Installation dimensions (L x W x H approx.): 2.5 x 2.2 x 2.1 m Weight approx.: 3.7 t Accessories such as tool holders and vices are not included in the offer. Transport and loading can be arranged Europe-wide, upon request and for an additional fee. Guodswx Naqjpfx Ah Djh Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be pleased to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell your own? For further information or contact options, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, X-axis: 600 mm, Y-axis: 500 mm, Z-axis: 540 mm, maximum table distance: 690 mm, feed rate: 40 m/min, table dimensions: 700 x 500 mm, maximum workpiece weight: 800 kg, control system: Heidenhain TNC 620, connected load: 18 kVA, length: 2,240 mm, width: 3,338 mm, height: 2,803 mm, weight: 5.6 t, supplied with documentation, has seen little use. Guodpfx Aov Hndfeh Djh

Stanje: pripravljen za uporabo (rabljen), Control: HEIDENHAIN TNC 150. Gujdpfx Asgtiaaoh Deh