Mikron Wf 3 Dp nakup rabljenega (191)

Stanje: zelo dobro (rabljeno), MIKRON WF 3 DP Universal Milling Machine TECHNICAL DATA Swivel Table Clamping surface: 450 x 800 mm Number of T-slots: 9 T-slot spacing: 45 mm Weight: 144 kg Machine dimensions: 1475 x 1770 x 2000 mm Weight: 1800 kg Connected load: 8.7 kW Milling Spindle Drive Rsdpfx Ajlnfggsbhen Spindle speeds: 21 steps Speed range: 25 – 2500 rpm Step increment: 1.258 Spindle motor power: 3.3 / 4.0 kW Tool holder: ISO 40 / M16 Quill travel, vertical: 110 mm Feed Drive Feeds in all 3 axes: Infinitely variable Feed range: 1 – 2000 mm/min Rapid traverse in all feed directions: 3000 mm/min Motor Torque Longitudinal + cross: 4 Nm Vertical: 8 Nm Travel distances Longitudinal travel of the clamping table (X axis): Automatic: 400 mm Cross travel of the clamping table (Y axis): Automatic: 400 mm Vertical travel of the clamping table (Z axis): Automatic: 385 mm No guarantee for the correctness, completeness or up-to-dateness of the information provided.

Stanje: zelo dobro (rabljeno), Orodarski rezkalni stroj Znamka: Mikron Tip: WF 3 DP Trioosni digitalni prikazovalnik Heidenhain Vpenjalo orodja SK 40 Rodpfxexvr Tre Abhon 24 vrtljajev, 30–2240 vrt/min Brezstopenjski podajalniki, od 1 do 750 mm/min Pritrdilna površina mize: 450 x 800 mm x dolžina 500 mm y širina 500 mm z navpično 400 mm Hidravlični vpenjalnik orodja Potrebni prostori: Širina: 1800 mm Globina: 1700 mm Višina: 2000 mm (s paleto) Teža: 1800 kg

Stanje: rabljeno, Leto izdelave: 1980, x-travel: 500 mm y-travel: 500 mm z-travel: 400 mm Spindle speed range: 30 - 2240 rpm Rsdpfx Abecxxq Dshen Infinitely variable feeds: 1 - 750 mm/min Rapid traverse: 1500 mm/min Table clamping surface: 400 x 800 mm Tool holder: SK 40 Total power requirement: 7.8 kW Machine weight approx.: 1.8 t Space requirement approx.: 2.1 x 1.6 x 2.2 m Equipped with Heidenhain TNC 131 control, swiveling device for vertical head, coolant system, separate drives for each feed spindle, automatic hydraulic clamping for all axes, the working axis is automatically released, and for manual operation all axes can be released.

Stanje: rabljeno, Leto izdelave: 1980, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 956.71.80.274, dolžina podajanja os X: 600 mm, dolžina pomika po osi Y: 500 mm, dolžina podajanja os Z: 400 mm, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 400 mm, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, The machine shown is in excellent condition and ready for immediate use. No heavy roughing operations have ever been performed with this machine. It is sold together with a vise and includes a tool cabinet with the contents as shown. Additionally, it comes with 2 sets of ground parallels as well as approximately 80 milling cutters, all in usable condition (partially lightly used), some as good as new, mostly coated in solid carbide, suitable for machining steel and aluminum. Rsdpfx Abjwnq Sgjhsn

Stanje: rabljeno, Leto izdelave: 1985, X-axis travel: 500 mm Y-axis travel: 500 mm Z-axis travel: 350 mm Table size: 800 x 450 mm Spindle taper: ISO 40 Quill stroke: -- mm Feeds – longitudinal & cross: -- mm/min Feeds – vertical: -- mm/min Rsdpfx Abotv Ia Tohen Max. spindle speed: 3,150 rpm Supply voltage: 380 V / 50 Hz Drive power: 4 kW Machine weight approx. 1.7 t Space requirement approx. 2.5 x 2.3 x 2.0 m Control: HEIDENHAIN TNC 155, with electronic handwheel, various tool holders, new bevel gear set,

Stanje: dober (rabljeno), Leto izdelave: 1991, potovalna razdalja osi X: 560 mm, pomik osi Y: 500 mm, pomik po osi Z: 400 mm, hitrost vretena (min.): 40 obr/min, x-hod: 560 mm Rjdpfx Aboyfnciehjn y-hod: 500 mm z-hod: 400 mm Krmilnik: TNC 360 Vrtljaji vretena: 40–4.000 min⁻¹ Skupna priključna moč: 7,5 kW Teža stroja pribl.: 2,6 t Potrebni prostor pribl.: 2,6 x 1,8 x 2,2 m

Stanje: rabljeno, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer Rodpfxekzpm Hs Abhen -Manufacturer: LAPP, three-phase transformer from CNC milling machine Mikron WF 51C/155 -Type: DT -Power: 300 VA -Primary: 3x380 V -Technical data: see nameplate photo -Dimensions: 150/90/H150 mm -Weight: 5.7 kg

Stanje: rabljeno, Transformer, Trafo, Converter, Three-phase Autotransformer, Three-phase Transformer - Manufacturer: Bosch, three-phase transformer, removed from CNC milling machine Mikron WF 51C/155 - Type: 100-911637 - Power: 4.5 kVA - Primary: 3x380 V - Secondary: 3x95/165 V - Dimensions: 335/135/H350 mm Rodpfxekyy Uqo Abhjn - Weight: 41 kg

Stanje: dober (rabljeno), Servo drive, servo card, input processor, control card, input card, controller, converter, controller, servo module, axis amplifier, axis amplifier, velocity control unit, spindle amplifier module, servo amplifier Rodpfx Abewd N S Dehjn - Manufacturer: Bosch, fully-equipped transistor amplifier from CNC milling machine Mikron WF 51C/155 - Type: TR15-XA-140-230V - Control cards/individual modules: see photos - Dimensions: 480/260/H365 mm - Weight: 24 kg

Stanje: dober (rabljeno), Motor s trajnim magnetom, trajni magnetni motor, elektromotor, n-Mot, motorji s trajnim magnetom, servomotor, motor z zobniškim prenosom, elektromotor, trofazni motor - Proizvajalec: Siemens, motor s trajnim magnetom iz CNC rezkalnega stroja Mikron WF 51C/155 - Tip: HU3074-,0AC01-Z - Napetost: 167 V - Moč: 1,8 kW - Hitrost: 2000 obr/min - Gred: Ø 22 x 45 mm Rjdpokxhpujfx Abhsn - Količina: na voljo 2 motorja - Cena: na kos - Dimenzije: 390/140/H185 mm - Teža: 23 kg/kos.

Stanje: rabljeno, Inrush current limiter, soft starter, softstarter, starting current limiter, soft start choke - Manufacturer: varimax, soft start choke/three-phase reactor removed from CNC milling machine Mikron WF 51C/155 Rjdpfokzpngsx Abhsn - Type: D 1515 S3 - Current rating: 10 A - Dimensions: 180/90/H190 mm - Weight: 9.5 kg

Stanje: rabljeno, Leto izdelave: 1982, x-travel 400 mm y-travel 400 mm z-travel 380 mm Total power requirement 2.6 kW Machine weight approx. 1.5 t Rjdpfju U Sabsx Abhen O F F E R We can offer you, subject to prior sale and errors excepted, immediately from stock and without obligation: MIKRON Universal Tool Milling Machine with Digital Readout Model: WF 2/3 S Year: approx. 1981 21S0401 _____ Working Area: Longitudinal traverse X-axis 400 mm Cross traverse Y-axis 400 mm Vertical traverse Z-axis 380 mm Fixed angle table approx. 450 x 800 mm Installation height under V-spindle approx. 65 – 445 mm Spindle taper: SK 40 12 spindle speeds: 50 – 2,240 rpm Quill stroke: 110 mm Infinitely variable feeds XYZ 1 - 630 mm/min Rapid traverse XYZ 1,400 mm/min Spindle drive power 2.6 kW Total drive approx. 5 kW - 380 V - 50 Hz Weight approx. 1,500 kg Accessories / Special Features: • HEIDENHAIN 2-axis digital readout for longitudinal and cross travel • Infinitely variable feed on all 3 axes with rapid traverse • Handwheels on all 3 axes for sensitive manual movement • Swiveling vertical head (+/- 90°) with quill and swivel device for use of the horizontal spindle • Hydraulic tool clamping for horizontal and vertical spindle • Fixed angle table 450 x 800 mounted • Integrated coolant system, attached control cabinet, central lubrication • Tool cabinet with extensive accessories for tool holders, horizontal milling equipment with various horizontal milling arbors, additional angle milling head, various operating tools • Work lamp, central lubrication, table change device This machine is still a "genuine" Mikron milling machine and was manufactured with proven Swiss quality. It is ideally suited both for toolmaking and for training purposes. Condition: Very good condition! Only used in toolmaking. Delivery: ex stock, immediate, FCA Metzingen Payment: strictly net - upon receipt of invoice We always stock a selection of universal and CNC milling machines of all types—please also inquire about alternatives!

Stanje: rabljeno, Leto izdelave: 1989, številka stroja/vozila: 6766, x-axis travel: 560 mm y-axis travel: 500 mm z-axis travel: 400 mm Table size: 900 x 530 mm Control: Heidenhain TNC 355 B/Q Tool holder: ISO 40 / M 16 Spindle speed range: 40 - 4000 rpm Rapid traverse X-axis: 6 m/min Rsdpocxxpqofx Abhon Rapid traverse Y-axis: 6 m/min Rapid traverse Z-axis: 5 m/min Feed rates x/y/z - stepless: 2 - 3000 mm/min Total power requirement: 9 kW Machine weight approx.: 2.6 t Space requirements approx.: 2.6 x 1.8 x 2.2 m Equipped with MIKRON SMP (160 mm chuck) mounted on table, splash guard enclosure, coolant pump, work light.

Stanje: rabljeno, CNC Tool Milling Machine MIKRON Type WF 40C/3M with Heidenhain TNC 310 CNC path control Machine no. 440911 Year of manufacture: approx. 1985, Overhauled and control system retrofit in 11/2000 Travel paths X: 600 mm Y: 600 mm Z: 460 mm Table size 900 x 550 mm Spindle taper ISO 40 Distance spindle nose - table max. 520 mm Spindle speed 31.5 - 3150 rpm, 21 steps Feed rate 1 - 2000 mm/min. Rapid traverse speed X and Y = 5000 mm/min.; Z = 4000 mm/min. Quill stroke 100 mm Main spindle drive 4 and 5 kW Mains connection 400 Volt, 50 Hz, 10.5 kW, 25 Amp. - Heidenhain TNC 310 CNC path control, NC software: 286140 07, PLC software: MIKR1 - Spindle speed via 21 gearbox steps Rjdpfx Ajw A Af Isbhen - Vertical milling head swivels right and left - Hydro-mechanical tool clamping vertical and horizontal - Central lubrication - Electronic handwheel - 62,815 operating hours (readout) - Control cabinet fixed to the machine rear - Coolant system in machine base - Swiveling operator panel - Electrical diagram, operator's manual for the control system available Required space (L x W x H) 2300 x 2000 x 2150 mm Weight 2900 kg Good condition

Leto izdelave: 1992, Stanje: pripravljen za uporabo (rabljen), X-axis travel: 560 mm, Y-axis travel: 500 mm, Z-axis travel: 400 mm. Vertical clamping table dimensions: 300 x 450 mm. Number of threaded holes: 2 x 6. Threaded hole spacing: 45 mm. Thread: M16. Angular table clamping surface: 460 x 800 mm. Number of T-slots: 7. T-slot spacing: 63 mm. T-slot width: 14 mm. Max. workpiece weight (recommended): 350 kg. Milling spindle drive: Number of working spindle speeds: 21. Speed range (geometrically stepped): 40–4000 rpm. Step progression: 1.259. Spindle motor power: 3.3 / 4 kW. Tool holder: ISO 40 / M16 with draw-in slot. Vertical quill stroke: 90 mm. Rsdpfsxcxz Nsx Abhon Stepless feed adjustment on all 3 axes: 2–3000 mm/min. Rapid traverse X-axis and Y-axis: 6000 mm/min. Rapid traverse Z-axis: 4000 mm/min. Feed motor torque longitudinal and transverse: 3.5 Nm each. Feed motor torque vertical: 7 Nm. Control: Heidenhain TNC 407. Connected load: 8.7 kW. Length: 3705 mm. Width: 2430 mm. Height: 3100 mm. Machine weight with vertical milling head and angular table: 2410 kg. Crate base weight: 170 kg. Shipping crate weight: 400 kg. Operating hours: 18,924 h. Accessories: 3D probe, 20 tool holders, splash guard enclosure, coolant pump, work light, electronic handwheel, machine documentation. An on-site inspection is possible.

Stanje: rabljeno, TECHNICAL DATA - Table dimensions: 350 x 800 [mm] - T-slots: 7 - Travel (X, Y, Z): 400, 400, 370 [mm] - Spindle speed: 50 - 2240 [rpm] - Rapid traverse speed with potentiometer: 0 - 630 [mm/min] ACCESSORIES Rodpfeuhbxaex Abhjn - 3-axis HEIDENHAIN digital readout - Chip guard

Stanje: dober (rabljeno), Mikron WF 32 CH Universal Milling Machine Machine with chip and splash guard enclosure Redpfxjwit Rhe Abhsn Equipped with a Heidenhain TNC355 control system Technical data Manufacturer: Mikron Model: WF 32 CH Control: Heidenhain TNC355 Traverse paths: X 560 mm / Y 500 mm / Z 400 mm Clamping surface: 530 x 900 mm Rapid traverse: X, Y 6,000 mm/min; Z 5,000 mm/min Spindle speed: 20 – 6,300 rpm Dimensions: 2,700 x 2,000 x 2,400 mm Weight: 2,400 kg You can find more new and used machines in our shop! International shipping costs on request!

Stanje: rabljeno, Leto izdelave: 1987, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: 30 09, Mikron WF 31 C, univerzalni CNC rezkalni stroj. Rodpfx Abeygk Nnshjn CNC-krmilje: Heidenhain TNC 155 Teža ca. 2300 kg. Stroj trenutno ni priključen in je v transportnem stanju, na željo kupca pa se lahko pripravi za obratovanje.

Stanje: pripravljen za uporabo (rabljen), Hod X/Y/Z: 500mm/500mm/400mm, dimenzije mize X/Y: 460mm/800mm, vpenjalo orodja: SK40, število obratov: 4000min⁻¹, pomik: 3m/min, hitri pomik: 5m/min, teža: pribl. 2500kg. Ogled na lokaciji je mogoč. Rodex Tul Iepfx Abhjn

Stanje: rabljeno, številka stroja/vozila: 152.00.80.20, Universal machining centre, CNC tool milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine - Clamping table: 800 x 445 mm - Travel (X/Y/Z): 500/500/385 mm - Spindle mount: SK40 - Quill stroke: 90 mm Redpjfbma Nsfx Abhon - Spindle speeds: 31.5 to 3,150 rpm - Coolant system - Dimensions (L/W/H): 1,475 x 1,770 x 2,000 mm - Weight: 1,966 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system Rsdpfx Asxu Hkcobhsn - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: rabljeno, Leto izdelave: 1991, Milling machine in good condition, fully operational. The machine is connected and can be inspected and tested on site. Specifications: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Spindle speed: 31.5 – 3150 rpm Controller: Heidenhain TNC 155 Motor power: 4 kW Weight: 2,300 kg Machine dimensions: 2580 x 1800 x 2125 mm Rodpfxoq Hdwuj Abhsn Manufactured in Switzerland If you have any further questions, we will be happy to answer them.

Stanje: dober (rabljeno), Mikron WF31D Precision Milling and Drilling Machine Machine with chip and splash guard enclosure Equipped with Heidenhain TNC355 control Technical Specifications​ The WF 31 D is a precision milling and drilling machine suitable for series production and CNC training. Drive via an automatically shifting stepped gearbox and Poly-V belt. Vertical spindle is extendable by 90 mm; conversion from vertical to horizontal machining possible. Ball screw spindles with DC drives enable simultaneous feed movements. Guides are protected against dust, chips, and coolant. Technical Data​ Manufacturer: Mikron Type: WF31D Control: Heidenhain TNC 355 Longitudinal travel (X): 560 mm Cross travel (Y): 500 mm Vertical travel (Z): 400 mm Drive power: 3.3/4.0 kW Speed range: 40–4000 rpm Feed rate: 2–3000 mm/min Rapid traverse speed X/Y: 6000 mm/min, Z: 5000 mm/min Electrical Equipment​ Rsdpfx Aewiucfebhjn Total installed rated power: 10.0 kW Installed useful power: 7.3 kW Operating voltage: 3 x 380 V – 50/60 Hz Protection class: IP 54 Max. permissible ambient temperature: +35 °C Relative humidity: 75% Dimensions and Weight​ Width: 2450 mm Length: 2800 mm Height: 2000 mm Net weight of the machine: approx. 2570 kg Further items – new and used – can be found in our shop! International shipping costs on request!

Stanje: rabljeno, Heidenhain Aktiv – digital display Infinitely variable feed Lamp Rodocmzzgepfx Abhjn Coolant system Travel paths X / Y / Z: 420 / 250 / 345 mm Spindle speed: 50 - 2240 rpm Feed in 3 axes: 0 - 750 mm/min Rapid traverse in 3 axes: 1400 mm/min Spindle taper: ISO 40 Vertical / horizontal quill extendable Dimensions approx.: 1.2 x 1.2 x 1.6 m

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 14.157 h, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 508 mm, pomik po osi Z: 653 mm, proizvajalec krmilnikov: SIEMENS, število osi: 3, Ta triosni vertikalni obdelovalni center MIKRON VF 3 je bil izdelan leta 1998. Ima velikost mize 460 × 1.220 mm, z pomikom osi X 1.016 mm, osi Y 508 mm in osi Z 653 mm. Če iščete visokokakovostni rezkalni stroj, razmislite o stroju MIKRON VF 3, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Velikost mize: 460 × 1.220 mm Rjdpoych Srefx Abhjn