Mikron Wf 3 nakup rabljenega (190)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Mikron WF 3S with 3-Axis Active Digital Readout (Heidenhain TNC 114) and Infinitely Variable Feed Technical Data: - Year of manufacture: approx. 1990 - Fixed angle table, clamping area: 800 x 450 mm - Spindle speed: 50 – 2240 rpm - Infinitely variable feed in 3 axes: 1 – 750 mm/min Blodpsxu Hkcsfx Afnod - Rapid traverse in 3 axes: 1400 mm/min - Travel X/Y/Z: 500/500/380 mm - Vertical quill, SK40, extendable - Weight: approx. 1600 kg Accessories and Equipment: - 3-axis active digital display Heidenhain TNC 114 - Central lubrication system - Operating manual, programming instructions, electrical diagrams About the machine: Offered here is a used Mikron WF 3S universal milling machine. It is equipped with a Heidenhain path control TNC 114, which means it can traverse a programmed distance in any axis, regardless of x, y, or z, and stops automatically upon reaching the set value. Four different zero points can be set; measurements can be input as absolute values or as incremental (chain) dimensions. The feed rate is infinitely variable from 0–750 mm and can be adjusted during milling operations. Rapid traverse can be activated at the push of a button. The spindle speed can be set in steps from 50 rpm to 2240 rpm, but only when the machine is stationary. The vertical milling head is fastened with three screws and can be removed or reattached within 2 minutes; it is manually mounted using the swing arm visible on the left side of the machine and can be easily swung aside. A particular feature of this machine is its exceptionally large travel ranges relative to its size: Z = 380 mm, X = 500 mm, Y = 500 mm. Furthermore, the machine is equipped with electronic protection for the vertical spindle. Mechanically and electrically tested. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: rabljeno, Leto izdelave: 1991, Milling machine in good condition, fully operational. The machine is connected and can be inspected and tested on site. Bledeq Hdwuopfx Afnsd Specifications: Model: Mikron WF31C Year: 1991 X axis: 500 mm Y axis: 500 mm Z axis: 400 mm Spindle speed: 31.5 – 3150 rpm Controller: Heidenhain TNC 155 Motor power: 4 kW Weight: 2,300 kg Machine dimensions: 2580 x 1800 x 2125 mm Manufactured in Switzerland If you have any further questions, we will be happy to answer them.

Stanje: dober (rabljeno), Leto izdelave: 1996, Rezkalni stroj Bedpjyq E I Tjfx Afneld Mikron WF 21C 1996 Tehnični podatki: X-os: 400 mm Y-os: 400 mm Z-os: 400 mm Vpenjalna miza Vertikalna vpenjalna površina: 300 x 450 mm Število navojev: 2 x 6

Stanje: dober (rabljeno), Leto izdelave: 1996, potovalna razdalja osi X: 710 mm, pomik osi Y: 630 mm, pomik po osi Z: 500 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 5 obr/min, For sale: a Mikron machining centre, model UMS 710-900. The machine is in good condition. New ball screws on X and Y axes, new Z-axis cover, and new Z-axis chip conveyor. Technical data: - X travel: 710 mm - Y travel: 630 mm - Z travel: 500 mm - CNC control: HEIDENHAIN TNC 426 - Table size: 1200 x 600 mm Bljdpott Acgefx Afnod - Max. table load: 500 kg - Spindle taper: SK 40 with ring groove - Spindle speed range: 5 - 5000 rpm - Spindle drive power: 11 kW - Feed rate range: 0 - 10,000 mm/min - Rapid traverse: 10 m/min - Operating voltage: 400 V - Total connected load: 15 kW - Machine weight approx.: 5.0 t - Space requirements approx.: 2.40 x 3.40 x 2.30 m - Chip tray - No internal coolant supply (IKZ) - 44-position tool changer - Handwheel Initial filling with operating fluids on request possible. Upon request and for an additional fee, loading and transport (Europe-wide) can be organised. All prices are plus VAT. Viewing by appointment is possible. Please contact us—our team will be happy to assist you. Part exchange or trade-in possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or to get in touch...

Stanje: rabljeno, širina mize: 800 mm, dolžina mize: 450 mm, Naprodaj je rezkar blagovne znamke Mikron v dobrem, rabljenem stanju, kot je vidno na slikah. Tehnični podatki: • Proizvajalec: Mikron • Model: WF-21C / 150 • S krmilnikom Heidenhain TNC 150 • Miza: pribl. 800 x 450 mm • Stanje: Rabljeno Pošiljanje preko špediterja možno (glede na poštno številko) Mednarodni kupci dobrodošli! Bodsympa Espfx Afneld Prejeli boste račun z izkazanim DDV. Ogled/prevzem možen po dogovoru v 42855 Remscheid. Prodaja z lokacije 42855 Remscheid, brezplačno nakladanje. Pridržujemo si pravico do napak v tehničnih podatkih in predhodne prodaje.

Stanje: dober (rabljeno), Popolne specifikacije so na fotografijah v oglasu. CNC HEIDENHAIN 426. Stroj je v dobrem delovnem stanju, videoposnetki na zahtevo. Blodpfx Afjymgd Ienod

Stanje: pripravljen za uporabo (rabljen), Spindle speed: 3,150 rpm, Travel path X/Y/Z: 710 mm / 500 mm / 500 mm, Number of spindle speeds: 21, Feed rate: 2,000 mm/min, Spindle taper: ISO40/M16, Distance from milling head to table: 559 mm, Table dimensions X/Y: 500 mm / 1,000 mm, T-slot spacing: 63 mm, Max. workpiece weight: approx. 500 kg. Dimensions X/Y/Z: approx. 2,700 mm / 2,300 mm / 2,200 mm, Weight: approx. 3,300 kg, Control: Heidenhain TNC 155. Documentation available. Bjdpfjtuwk Uox Afnsld

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, obratovalne ure: 14.157 h, potovalna razdalja osi X: 1.016 mm, pomik osi Y: 508 mm, pomik po osi Z: 653 mm, proizvajalec krmilnikov: SIEMENS, število osi: 3, Ta triosni vertikalni obdelovalni center MIKRON VF 3 je bil izdelan leta 1998. Ima velikost mize 460 × 1.220 mm, z pomikom osi X 1.016 mm, osi Y 508 mm in osi Z 653 mm. Če iščete visokokakovostni rezkalni stroj, razmislite o stroju MIKRON VF 3, ki ga ponujamo v prodajo. Za več informacij nas kontaktirajte. • Velikost mize: 460 × 1.220 mm Bedpeych Srofx Afneld

Stanje: rabljeno, Leto izdelave: 1990, X-hod 450 mm Y-hod 400 mm Z-hod 400 mm Krmilnik Heidenhain 355 Bedpfxopxrkne Afnsld Skupna potrebna moč 4 kW Teža stroja ca. 2,4 t

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: WF 74 C TNC, dolžina podajanja os X: 900 mm, dolžina pomika po osi Y: 630 mm, dolžina podajanja os Z: 500 mm, potovalna razdalja osi X: 900 mm, pomik osi Y: 630 mm, pomik po osi Z: 500 mm, največja hitrost vretena: 5.000 obr/min, hitrost vretena (min.): 25 obr/min, skupna višina: 2.420 mm, skupna širina: 3.573 mm, skupna dolžina: 3.925 mm, širina mize: 600 mm, dolžina mize: 1.200 mm, vhodna napetost: 400 V, Oprema: dokumentacija / priročnik, Pomik po osi X: 900 mm Prečni pomik po osi Y: 630 mm Višinski pomik po osi Z: 500 mm Dimenzije vpenjalne površine mize (D x Š): 1200 x 600 mm Bledsyh Ahpspfx Afnjd Vpenjalni stožec glave rezkarja (ISO): ISO 40 Globina vrtanja: 100 mm Maksimalno število hitrosti: 20 > 6300 obr/min Krmiljenje: Heidenhain

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Pomiki X/Y/Z 600/600/460 mm, 21 obratov 31,5 - 3150 obr/min, motor 4,0 kW, vreteno ISO 40, krmiljenje Heidenhain TNC 150, velikost mize 900x550 mm, hidravlična menjava orodja, hitri pomiki, nagibno-rotacijska miza z delitvijo, horizontalna rezkalna naprava, strojna svetilka, hladilna naprava, brizgalna zaščita, nastavljive noge, navodila za uporabo, odlično stanje. Blodpfx Afepcf D Ienjd

Stanje: dober (rabljeno), Main spindle with drive motor, universal milling head, milling arbor, milling extension, angular milling head, compound slide, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, compound slide and tool slide from CNC milling machine Mikron WF 51C/155 Bljdekvrptopfx Afnsd -Motor: AEG 380V 8 kW 1400/2850 rpm -Measurements: see photos / technical drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, 1 used universal tool milling machine Manufacturer: Mikron Model: WF 2 SA Year of manufacture: 1990 Equipped with Heidenhain Aktiv digital display TNC 114 Infinitely variable feed Lamp Coolant system Travel (X / Y / Z): 420 / 250 / 345 mm Spindle speed: 50 - 2240 rpm Clamping surface: 635 x 250 mm Feed rate in 3 axes: 0 - 750 mm/min Rapid traverse in 3 axes: 1400 mm/min Spindle taper: ISO 40 Vertical/horizontal quill extendable Dimensions approx. 1.2 x 1.2 x 1.6 m Bodpferywgzox Afnsld Weight approx. 1200 kg

Stanje: rabljeno, Ball screw with nut, transroll spindle, ball screw nut, threaded spindle, threaded rod, threaded bolt, threaded rod, ball screw drive, linear bearing, precision ball screw - Manufacturer: Mikron, ball screw drive from CNC milling machine Mikron WF 51C/155 - Thread length: 540 mm - Shaft: Ø 32 mm Blsdpfx Aekvrqiofnod - Dimensions: see photos - Overall size: 870/140/H130 mm - Weight: 18 kg

Stanje: rabljeno, Control: Heidenhain TNC 155 Tool holder: SK 40 Quill stroke: 110 mm Table size: 1000 x 500 mm Travels: X-710, Y-500, Z-460 mm Spindle speed: 31.5–3150 rpm Accessories: Swivel table, coolant system, various tool holders Bljdpfx Afoc Tt Hrsnjd

Stanje: dober (rabljeno), Transformer, trafo, converter, three-phase autotransformer, three-phase transformer -Manufacturer: Trasfor, transformer/trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see nameplate photo -Dimensions: 180/160/H215 mm Bedpfxokzpmuj Afnold -Weight: 25.5 kg

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, številka stroja/vozila: 956.71.80.288, potovalna razdalja osi X: 300 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, model krmilnika: HEIDENHAIN TNC 150, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Stroj je na dražbi zaradi prenehanja poslovanja podjetja. Oddaja ponudbe vas zavezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Pomik po X-osi: pribl. 300 mm Pomik po Y-osi: pribl. 300 mm Pomik po Z-osi: pribl. 300 mm Orodni vpenjalni stožec: SK 40 Dimenzije mize: 1.000 x 500 mm, s 7 utori PODROBNOSTI O STROJU Krmiljenje: HEIDENHAIN TNC 150 Električni podatki Obratovalna napetost: 380 V Frekvenca: 50 Hz Nazivni tok: 25 A Priključna moč: 10,5 kW Mere & teža Mere (D x Š x V): 2.500 x 2.400 x 2.200 mm Teža: 2.000 kg OPREMA Bodpoxqg Itofx Afnsld Dokumentacija Vpenjalne glave Set končnih mer

Stanje: rabljeno, Leto izdelave: 1981, X-axis travel: 800 mm Y-axis travel: 500 mm Z-axis travel: 460 mm Clamping surface of table: 1000 x 500 mm Spindle taper: SK 40 Bljdpfxetqqple Afnsd Control system: HEIDENHAIN TNC 150 Spindle speeds: 31.5 – 3,150 rpm Feed rates – longitudinal/cross/vertical: 1 – 3,000 mm/min Rapid traverse longitudinal and cross: 6 m/min Rapid traverse vertical: 4 m/min Quill stroke: 110 mm Distance spindle nose to table (max.): 559 mm Max. table load: 500 kg Total power requirement: 14 kW Machine weight approx.: 3.1 t Machine dimensions (L x W x H): 2.15 x 1.8 x 2.15 m Accessories: Vertical head with hydraulic tool clamp and extendable quill, fixed table, coolant system

Leto izdelave: 1987, Stanje: rabljeno, številka stroja/vozila: 152.41.74.002, Table clamping surface: 500 x 1000 mm Travel (X-axis): 630 mm Bsdpfx Ao H I Hdsfnsld Travel (Y-axis): 500 mm Travel (Z-axis): 460 mm Quill stroke (manual): 45 mm Spindle taper: ISA 40 Spindle speeds: 31.5 - 3150 rpm Feed rate, steplessly adjustable: 1 - 3000 mm/min Rapid traverse: X/Y 6 m/min, Z 4 m/min Electrical connection: 380 V, 6/8 kW Space requirement: 1800 x 2120/2600 x 2020 mm Weight: 3100 kg Control: HEIDENHAIN, TNC 155

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 600 mm, pomik osi Y: 450 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 530 i, največja hitrost vrtenja: 10.000 obr/min, število mest v zalogovniku orodij: 24, Obdelovalni center MIKRON VCE600PRO z pomiki po 3+2 oseh X 600 Y 450 Z 540 mm, SK40 s 10.000 obr/min in ATC za 24 orodij. Odlično stanje. Bedpfjqi Ufxjx Afnjld

Leto izdelave: 1990, Stanje: zelo dobro (rabljeno), Mikron WF2S universal milling machine with 3-axis Elesta-Visulesta digital readout. Fixed angle table, SK 40 spindle taper. Machine is in very good, ready-to-operate condition, from a research institute. Can be demonstrated under power by prior arrangement. Blodpfog Nw Rzex Afnod

Stanje: dober (rabljeno), Maszyna jest dostarczana z uchwytami narzędziowymi. Bledpfxjvk Ng Ae Afned

Stanje: pripravljen za uporabo (rabljen), Na voljo je pet starejših rezkalnih strojev za navoje Mikron: 3x hidravlični stroj za valjčno rezkanje navojev Mikron 132.02, 1x Mikron 132-01, 1x Mikron 104-01 in 1x stroj za kratko navojno rezkanje Mikron 106.01. Ogled na lokaciji je mogoč. Bjdpsw Sxyxsfx Afnold

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, potovalna razdalja osi X: 1.350 mm, pomik osi Y: 900 mm, pomik po osi Z: 750 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: TNC 426 M, skupna višina: 3.150 mm, skupna masa: 10.100 kg, največja hitrost vretena: 24.000 obr/min, teža orodja: 8.000 g, število osi: 3, This 3-axis MIKRON VCP 1350 was manufactured in 2000. It features a Heidenhain TNC 426 M control, an X-axis travel of 1,350 mm, a Y-axis of 900 mm, and a Z-axis of 750 mm. The machine supports a maximum workpiece weight of 1,800 kg and is equipped with a Step-Tec HSK-A63 high-speed spindle with 24,000 rpm. Ideal for precision machining, it offers a tool magazine capacity of 46 tools. Contact us for further information on this machine. Additional Equipment • High-speed precision machining Machine Advantages Technical Machine Advantages • Equipped with automatic spindle orientation and a high-speed spindle (24,000 rpm) • Coolant pressure: 30 bar (standard) / 40 bar (optional high-pressure) Blsdpfxoyarz Ee Afnjd • Tank capacity: 180 l (optional 600 l) • Direct drive AC motor • Measuring system: direct linear scales on all axes • Clamping area: 1,425 x 860 mm • Magazine capacity: 46 tools (standard), 92 tools (optional) • Maximum magazine load: 200 kg • Tool-to-tool changeover time: approx. 12 seconds • Available for inspection Additional Information Machine still under power Dimensions Machine depth: 4,130 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Mikron WF 21 C Kratek opis: CNC orodjarska rezkalna naprava Opis: Takoj na voljo iz lokacije po zaprtju obratovanja: Blsdpfx Aox Scvfofnjd CNC orodjarska rezkalna naprava Mikron Tip WF 21 C Leto izdelave 1980 Krmiljenje Heidenhain TNC 155 Miza 800 x 460 mm Pomiki X / Y / Z: 500 / 500 / 400 mm Vpenjalni stožec SK 40 Vrtljaji vretena 24 - 3150 obr/min Teža 2,2 t