Expresso Deutschland Gmbh Lift2Move 125 nakup rabljenega (81.692)

Stanje: rabljeno, Technical Data – Input Hopper with Hydraulic Walking Floor and Bag Opener for Recyclables from Yellow Bags and Commercial Waste: Manufacturer: BRT HARTNER GmbH Model: HP5-3035 Year of manufacture: 2015 Hopper volume: 30 m³ Drive power: 17.5 kW Dimensions (current state): 13,200 x 3,050 x 4,350 mm (L x W x H) Machine Condition: The input hopper with bag opener was previously used at a large recycling facility, where recyclables from yellow bags or commercial waste were loaded into the hopper by wheel loaders. The bags were opened by the bag opener, with the recyclables either fed into a sorting plant or commercial waste transferred for further processing in a metered manner. The system operated flawlessly until it was dismantled and replaced with a larger unit with higher throughput capacity. The machine was disassembled into individual components in our workshop, partially refurbished, reassembled, and tested under operating conditions. The following refurbishment work was carried out and the following spare parts were replaced: - Disassembly of input hopper and bag opener into individual components; cleaning, partial sandblasting, priming, and painting of steel parts. - Various wear and cover plates were newly fabricated and installed. - Removal of worn ends (approx. 40 cbm) of walking floor tubes. Welding and smoothing of new tubes. - Complete replacement of the sliding plastic plates for the hydraulic walking floor. - Removal of the hydraulic unit from the walking floor, draining of the hydraulic oil tank, replacement of oil filters, refill with new hydraulic oil. - Renewal of all three hydraulic blocks, all valves, sight glass and all hydraulic hoses from the hydraulic unit. - On all three walking floor hydraulic cylinders, the seal sets and hydraulic hoses were replaced. - All six end switches (proximity sensors) of the walking floor were replaced. - The conveyor chains on both left and right sides of the drag chain conveyor were renewed. - Seven driver slats of the drag chain conveyor were replaced. - The drive motor of the tearing discs was replaced. - All nine pneumatic cylinders for the pressure pipes were replaced. All pneumatic lines and fittings were renewed. - All sliding plastic plates for the hydraulic adjustment of the bag opener were replaced. The bag opener can be moved in depth to allow the system to be used for commercial or residual waste without utilizing the bag opener. - On both sides, the lateral collision protection plates were replaced. Kdjdpfx Ajy S Rw Dsfvjl - Various wear parts of the bag opener were replaced. - The entire system was electrically rewired and connected. - The system control in the switch cabinet was retrofitted by BRT Hartner to autonomous single control and the standard program was reinstalled into the control system. - The system was commissioned and tested by BRT Hartner, see the function video. Notes: Documentation (operating manual, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. We accept no liability for technical information or possible errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, leto zadnje generalne obnove: 2025, Technical Data Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Feed opening chute: 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Kdjdpoy S Rv Tofx Afvsl Drive power: 30 kW Connected load: 40 kW Total current consumption: 70 A Processing capacity for empty beverage cans: - One press stroke: approx. 1.7 t/hour - Two press strokes: approx. 2.5 t/hour Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight of press: approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made from wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tinplate cans, sheet metal scrap, steel sheet, as well as aluminum, brass, and copper waste. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition – see functional video after refurbishment. During relocation of the machine, there was transport damage. The control cabinet was damaged and slightly dented by a forklift, and the main switch (on/off switch) was damaged. These damages are reflected in the significantly reduced sale price and must be repaired by the buyer at their own expense. Remarks: The complete documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available. Inspection possible by appointment. We accept no liability for technical details or possible errors.

Stanje: rabljeno, Leto izdelave: 2021, številka stroja/vozila: 7007490, Lastna teža: 14.300 kg, Dimenzije: dolžina: 6,9 m, širina: 2,5 m, višina: 2,55 m, Dimenzija zabojnika: 6,5 m, Številka drobilca: 103334 Kdjdpfx Aoy Rvlqjfvol

Stanje: rabljeno, Leto izdelave: 2018, številka stroja/vozila: CS418-03-08, Lastna teža: 7900 kg, priključna moč: 15 kW, mere kontejnerja: dolžina: 6,5 m, širina: 2,3 m, višina: 2,64 m Kdedoy Rvmnspfx Afvel

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Dressing Machine for Grinding Wheels: Simple manual operation, robust and precise Technical specifications: Diamond grinding spindle: HSK-50 or as per customer request (e.g. SK-40, Perfect Arbor, etc.) Max. dressing wheel diameter: ø300mm Max. dressing wheel width: 20mm Max. grinding wheel diameter: up to ø250mm Grinding wheel speed: 0-1500 rpm (infinitely variable) Travel range left/right: 135mm Travel range forward/back: 135mm Dressing wheel diameter (silicon carbide): ø180x10xΨ32mm Approx. 98 degrees traversable on both sides Dressing wheel speed: 0-2800 rpm (infinitely variable) Oscillation frequency of dressing wheel: 0-50 cycles/min (infinitely variable) Dressing wheel oscillation stroke: 0-50mm (adjustable) Kdedpfx Ajha Eh Hofvjl X/Y axis optical scale resolution: 0.001mm Capabilities: profiling of radii, dressing multiple wheel sets Electrical connection: 380V, 50Hz, total power approx. 1.5kW DXF import included Camera system with live transmission via 23" monitor included Latest software generation GWDress-Studio with automatic AI measurement included

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, The GWDress-250 smartline is the intelligent solution for precise dressing of grinding wheels up to a diameter of 250 mm. Thanks to selectable manual or automatic control, dressing processes can be flexibly and highly efficiently configured. Performance Data: - Rotary and feed axes, CNC-controlled - Diamond grinding spindle: HSK-50 or per customer request (e.g., SK-40, Perfect Arbor, etc.) - Max. dresser wheel diameter: ø300 mm - Max. dresser wheel width: 20 mm - Max. grinding wheel diameter: up to ø250 mm - Grinding wheel speed: 0–1500 rpm (infinitely variable) Kjdjw E E S Aepfx Afvsdl - Range of motion, left/right: 135 mm - Range of motion, forward/backward: 135 mm - Dresser wheel dimensions (silicon carbide): ø180x10xΨ32 mm - Approx. 98 degrees traversable on both sides - Dresser wheel speed: 0–2800 rpm (infinitely variable) - Dresser wheel oscillation frequency: 0–50 cycles/min (infinitely variable) - Dresser wheel oscillation length: 0–50 mm (adjustable) - X, Y axis optical scale system: 0.001 mm - Capabilities: Profile dressing, disc pack dressing - Connection: 380V, 50Hz, total power approx. 1.5 kW - DXF import included - Camera system with live transmission to a 23" monitor included - Latest software generation GWDress-Studio with automatic AI measurement included - Country of origin: Austria

Stanje: rabljeno, Machine weight approx. 110 kg Space requirement approx. 950 x 435 x 980 mm The newly developed "mti inverter series" from ESS for single-phase welding machines, which has already proven itself thousands of times, is now being extended to a three-phase system. The combination of semiconductor technology, resonant inverter circuits, and classical transformer technology once again enables the integration of their respective advantages into state-of-the-art welding equipment. Kdedpjwf Rg Sefx Afvel --> Technical data Mains connection: 3/PE AC 400 V --> Maximum primary power: 14 kVA --> Mains fuse: T 16 A --> Adjustment range: 5 - 300 A --> Stick electrodes: Ø 1.5 - 5 mm --> Protection class: IP 23 --> Water cooling unit for the welding torch: integrated

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine designed for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In practical use, the SHARC process achieves higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the transition zones, and, if required, dispensing with additional filler materials). --> Technical data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power consumption: 23 kVA Kdedjwf Rg Eopfx Afvjl Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In use, the SHARC process results in higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, less hardening of the transition zones, and if required, the possibility to forgo filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Setting range: 10 - 320 A Setting range electrode: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 A Duty cycle 100%: 260 A Cooling type: F Kjdpfjwf Rgxox Afvsdl Protection class: IP 23

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Welding voltage: 22 V Ksdpfswf Rgrox Afvedl Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Stanje: novo, Leto izdelave: 2026, Enostavno vzdrževalna naprava za odstranjevanje prahu, posebej razvita za agresiven peskalni prah z predsobo s prizmatičnim ločevalnikom, v osnovi sestavljena iz: a) 1 kos kartušnega suhega filtra, tip PF 2.16.B250 za 30.000 m³/h (na voljo tudi druge velikosti) Sestavljen iz stabilnega, vakuumsko neprepustnega 3 mm jeklenega ohišja, razdeljenega na surovi plinski prostor s filtrskimi kartušami, filtrsko predsobo s prizmatičnim ločevalnikom in čistim plinskim prostorom s čiščenjem filtra z uporabo stisnjenega zraka, vsak z ločenimi servisnimi vrati Easy Open. Lijak za zbiranje prahu z režnim ventilom ali zvezdastim dozatorjem za odstranjevanje prahu z Big Bag vrečami. Krmiljenje magnetnega ventila z indikatorjem diferenčnega tlaka za optimalno nastavitev čiščenja filtrov. Servisna vrata kot nihajna vrata – enostavno vzdrževanje. Ksdpfow Ivqmsx Afvedl

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 10.000 mm, notranja višina: 5.000 mm, filtrirna površina: 250 m², volumenski pretok: 16 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. Kdodpfou Ey Dljx Afvjl 50 years of experience and more than 3,000 systems built in blast room engineering.

Stanje: novo, Leto izdelave: 2026, Shot blasting booth components: flat conveyor floor, cross screw conveyor, bucket elevator, air separator, screen, abrasive bunker, blasting machine, filter unit, fan, air ducts, lamella extraction wall, blast feed box, electrical control system supplied as a kit without installation. Alternatively, the system components can also be installed on your premises by our professional technicians. Kjdpfx Afshc T Nljvsdl

Stanje: zelo dobro (rabljeno), For sale: Professional EXpressO vacuum lifter, German-made. The device is designed for lifting and transporting flat elements using vacuum technology. This model offers increased lifting capacity up to 70 kg and is equipped with PIAB components as well as four large suction cups ensuring stable and secure handling. Ideal for working with glass, metal sheets, panels, and other flat elements in industrial and warehouse environments. Technical Data: Manufacturer: EXpressO Deutschland GmbH Type: Vacuum lifter Max lifting capacity: 70 kg Year of manufacture: 2012 Serial number: 2012 003 Model number: 060BLV1502162 Vacuum system: PIAB Number of suction cups: 4 Vacuum gauge Pneumatic connections Condition: The device is in very good technical condition Fully functional both visually and mechanically Normal signs of use Complete set as shown in the photos Applications: Transporting glass panes and glass Transporting sheet metal and panels Production lines Warehouses and logistics Included in the set: Kdsdpsyvfchjfx Afvjl Complete vacuum lifter Control handle Pneumatic installation Shipping: Courier shipping available

Stanje: zelo dobro (rabljeno), Naprodaj profesionalni vakuumski prijemalec EXpressO Balance Greifer, izdelan v Nemčiji. Naprava je namenjena za dvigovanje in prevoz ploščatih predmetov s pomočjo podtlaka. Opremljena je s sistemom PIAB in štirimi priseski, ki zagotavljajo stabilen in varen oprijem elementov. Idealna za industrijsko uporabo, kot so transport stekla, pločevine, plošč in drugih ploščatih elementov. Tehnični podatki Proizvajalec: EXpressO Deutschland GmbH Tip: Balance Greifer Nosilnost: 20 kg Leto proizvodnje: 2012 Številka artikla: 060BLV114110 Vakuumski sistem: PIAB Število priseskov: 4 Priključki: G1 2 Vakuummeter Stanje: Naprava v zelo dobrem tehničnem stanju Vidne običajne sledi uporabe Kompletno kot na slikah Uporaba: transport stekla in oken transport pločevine in plošč skladišča in proizvodnja tehnološke linije V kompletu: kompleten vakuumski prijemalec Kjdpfx Ajyvd Upofvjdl krmilni ročaj pnevmatska inštalacija

Stanje: novo, Prodam novo centrifugalno črpalko KSB ETABLOC GN 65-125 z motorjem Siemens 5,5 kW. Naprava je iz skladiščne zaloge – v zelo dobrem stanju, neuporabljena. Črpalke serije KSB ETABLOC so visokokakovostne industrijske črpalke, namenjene uporabi v vodnih sistemih, ogrevalnih in hladilnih sistemih, tehnoloških instalacijah ter v industriji. Trdna konstrukcija in blagovna znamka Siemens kot motor zagotavljata visoko zanesljivost in dolgo življenjsko dobo naprave. Tehnični podatki črpalke • Proizvajalec: KSB Aktiengesellschaft • Model: ETABLOC GN 65-125/552 • Zmogljivost: 18 – 136 m³/h • Dvižna višina: 11 – 19,2 m • Hitrost vrtenja: 2.900 obr/min Motor • Proizvajalec: Siemens • Tip: 1LA7130-2AA66 Kdjdpfxsyuqxre Afvol • Moč: 5,5 kW • Napajanje: 400 / 690 V • Zaščita: IP55 • Ohišje: B35 Črpalka s prirobničnimi priključki – pripravljena za vgradnjo v sistem.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Grinding Wheel Dressing Machine: Easy to operate, robust, and precise Kodpeubbrtefx Afvedl Our grinding wheel dressing machine with enclosure offers you an unbeatable combination of user-friendly operation and exceptional stability. The solid granite bed ensures maximum precision and durability, while the intuitive controls optimize efficiency in your workshop. While you continue production on your tool grinding machine, our dressing machine saves you both time and money. Ideal for anyone who values reliable performance and outstanding value for money!

Stanje: novo, naslednji pregled (TÜV): 09/2026, dolžina tovornega prostora: 8.000 mm, širina tovornega prostora: 2.000 mm, višina nakladalnega prostora: 540 mm, skupna širina: 2.000 mm, velikost pnevmatike: 23x9-10, stanje pnevmatik: 100 odstotek, barva: oranžna, Leto izdelave: 2026, Platformni transportni voziček Nosilnost: 10.000 kg Dolžina nakladalne površine: 8.000 mm Širina nakladalne površine: 2.000 mm Višina nakladalne površine: 540 mm Transportno dno: 30 mm duglazija, poglobljeno in privijačeno Privezne oči na vsaki vzdolžni strani: 5 kosov Kdsdpfx Afsit Twujvel Barva: RAL 2000 Vlečna ojnica z nastavitvijo višine in varovalom proti padcu Dvodelni podporni zagozd Superelastične pnevmatike 23x9-10 s kovinskim platiščem in stožčastim ležajem Vse-kolesno krmiljenje Sled in krmilne palice nastavljive z zgibnimi očesi

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Heavy-duty transport trailer with a payload of 8 tons on the loading platform. Dimensions: 6000 x 2400 x 900 mm with a turntable steering system on the front axle and a fixed trailing axle. Pneumatic tires 7.00-15. Equipped with an overrun brake and a parking brake on the steering axle. Transport floor made of 30 mm wood, or optionally 18 mm phenolic resin coated plywood for an additional €220. At the front (in the direction of travel) a 1000 mm high front wall with grille, 40 mm mesh size. Lashing points along the sides for securing the load. Optional lighting system available for an additional €980, including a spiral connection cable. Standard paint finish in RAL 2000; other colors available on request for newly manufactured units. Ksdjkzhqxjpfx Afvsdl

Stanje: skoraj kot novo (rabljeno), lastna masa: 2.300 kg, največja dovoljena obremenitev: 20.000 kg, skupna masa: 22.300 kg, naslednji pregled (TÜV): 11/2025, dolžina tovornega prostora: 5.000 mm, širina tovornega prostora: 2.000 mm, velikost pnevmatike: 450x300, barva: oranžna, Leto izdelave: 2025, obratovalna teža: 20.000 kg, Težki transportni priklopnik z mero 5000 x 2000 x 610 mm. Nosilnost 20 ton pri 6 km/h. Krmiljenje z vsemi kolesi, osne čepne ročice z nastavljivimi sledilnimi palicami. Obloge 450 x 300 na jeklenih platiščih z obojestranskimi konusnimi ležaji. Vlečna os z kovanim vlečnim ušesom 40 mm in zavarovanjem proti izpadu. Transportno dno iz 40 mm smreke, utopljeno in privito. Na vsaki vzdolžni strani na okvir privarjene pritrdilne zanke za varovanje tovora. Na okviru nameščena dvodelna zagozda za kolesa. Kdodpfsn D D S Sex Afvel

Stanje: novo, lastna masa: 3.400 kg, največja dovoljena obremenitev: 30.000 kg, skupna masa: 33.400 kg, dolžina tovornega prostora: 6.000 mm, širina tovornega prostora: 2.200 mm, velikost pnevmatike: 559x300, Leto izdelave: 2026, TPW 30 VL - LK Prednja os krmiljena preko obračalne šasije Zadnja os tog Dolžina 6000 mm Širina 2200 mm Vlečna drog z varovalom proti padcu in nastavitvijo višine Kolesa z obročem 559x300 s kovinskimi platišči Na vsaki vzdolžni strani 5 omejevalnih blokov za pritrjevanje tovora Barva RAL 2000 modra Transportno dno iz lesa, 40 mm, vgreznjeno in privijačeno Ksdpfshbmu Ijx Afvsdl #Težki transport #Sistemi notranjega transporta #Težke prikolice 6-100 ton #Težke prikolice od 3 do 100 ton #Transportni platformni voziček za težke tovore #Platformne težke prikolice #Krmiljenje vseh koles #Transportni voziček

Stanje: novo, Leto izdelave: 2025, Plasma cutting system for tubes and profiles Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created using CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be easily accessed via the 12" touch display. After the workpiece is manually loaded, the automatic cutting process is started. - Pipe length: max. 6000 mm - For round pipes up to max. OD=220 mm - For square tubes up to max. 152.4 x 152.4 mm (6" x 6") - Maximum pipe weight: 250 kg - 4-jaw chuck - Side loading possible, secured with light curtain Ksdpfogu Nmhjx Afvsdl - Fully automatic cutting process - Industrial PC control with 12" touch display - Data import via USB and LAN - Power consumption (machine): 400V 3P 2KW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 1000 kg Made in Germany The pictures show an older machine.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Plasma cutting system for pipes and profiles Kdsdpfx Aog Dvdcefvjl Machines for plasma cutting of pipes and profiles. The cutting contour is defined and created via the CAM software. The generated CNC code is then transferred to the machine via USB or network. The program can be accessed easily via the 12" touch display. After manually loading the workpiece, the automatic cutting process is started. - Pipe length: max. 6000 mm - Suitable for round pipes up to max. OD = 150 mm - Suitable for square pipes up to max. 101.6 x 101.6 mm (4" x 4") - Maximum pipe weight: 150 kg - 4-jaw chuck - Side loading possible, secured by light curtain - Fully automatic cutting cycle - Industrial PC control with 12" touch display - Data import via USB and LAN - Power supply for machine: 400V 3-phase, 2 kW - Dimensions: 690 x 100 x 180 cm - Weight: approx. 800 kg Made in Germany The pictures show an older, larger machine.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD → Maximum bending capacity, tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity, tube 30 x 30 x 3 mm → Maximum bending capacity, tube 42.4 x 2 mm (stainless steel VA 0.2 260 N/mm²) → Total connected load 3 kW → Tube feed-in length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for the bending, feed, and rotation axes. The control system's touch display allows for easy and intuitive programming and operation of the machine. After the tube is inserted, it is fixed in place by the chuck in the carriage, ensuring precise positioning and permitting the production of dimensionally accurate geometries. Standard features also include a tube geometry check before the bending process: if the bending process is started at the wrong position, the machine will not release the bending operation—misoperation is prevented. Optional additional features increase comfort, boost output, and thus enhance the system’s efficiency. Data exchange with the optional TBS-3D pipe calculation software (PC version) is done via USB stick or network. Existing tube geometries can be imported using the software. Standard features: → Servo drive on bending axis, 1.5 kW → Adjustable rotation speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for clamping the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping force → Programmable early mandrel retraction PLC control: → 10" colour touchscreen → ETH 10/100, X2X Link, 2x USB → Foot switch operation → Data transfer via LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly at the machine. After entering length and angle, the controller automatically calculates the feed values and bending angles. Kjdpfx Afstr U Hlevjdl Power supply: 400V 16A Dimensions: L: 2.3 m x W: 1 m x H: 1.4 m Weight: approx. 1200 kg

Stanje: rabljeno, Leto izdelave: 2017, Premer cevi (maks.): 80 mm, dolžina vpenjala: 4.500 mm, Mandrel Bending Machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5XD → Maximum bending capacity, tube: 76 x 4 mm (400 N/mm²) → Maximum bending capacity, tube: 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity, tube: 76 x 2.9 mm (stainless steel) → Total connected load: 7 kW → Tube loading length: 4.5 m Robust and durable steel construction in a rigid, force-locking design – no twist-prone construction resulting from, for example, split design of bending head and mandrel carrier. Maintenance-free electromechanical drive for the bending axis. The control’s touch display enables easy and intuitive programming and operation. After inserting the tube, it is fixed by the chuck in the carriage, ensuring precise tube positioning and thus the production of dimensionally accurate geometries. The standard equipment also includes geometry checking prior to the bending process: If bending begins in the wrong position, the machine does not grant release, thus ruling out operating errors. Optional additional features provide more convenience and increase throughput as well as the system’s efficiency. Data exchange from the optional TBS-3D tube calculation software (PC version) is possible via USB stick or FTP access from the computer to the machine controller. USB and LAN (RJ45) connections are included as standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard equipment: → Electromechanical drive for bending axis, 4 kW → Rotational speed 2.9 rpm (=17°/sec.) → Bending direction: left → Bending angle resolution: 0.1° → Max. bending radius: 200 mm → Bending shaft diameter: 50 mm → Electronic length measurement ±0.1 mm Kdedpfx Afottah Revjl → Electronic rotation angle measurement ±0.1° → Manual stop system (longitudinal stops) → Manual indexing system (15° in rotation) → Three-jaw chuck for securing tube in the carriage → External control panel PLC control: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot switch operation → Data transmission via network (W)LAN or USB → Material database Unique graphic programming: simple geometries can be calculated directly on the machine. After entering length and angles, the control computes the feed and bending angles directly. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable pre-emptive mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (on rollers) → Radius extension Images show new machine