Varilni stroj TIG

H.W. Hermann GmbH SHARC 320 T DC

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Ijdpfx Afswf Rgre Tjtb Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, skupna masa: 175 kg, vrsta goriva: dizel, kapaciteta rezervoarja: 15 l, barva: črn, Izhodni tok: 20 A, izhodna napetost: 400 V, izhodna frekvenca: 50 Hz, nazivna moč: 11 kW (14,96 KM), neprekinjena moč: 8,5 kW (11,56 KM), skupna dolžina: 800 mm, skupna širina: 700 mm, skupna višina: 750 mm, največja hitrost vrtenja: 3.000 obr/min, vrsta hlajenja: zrak,

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In use, the SHARC process results in higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, less hardening of the transition zones, and if required, the possibility to forgo filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Setting range: 10 - 320 A Setting range electrode: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 A Duty cycle 100%: 260 A Cooling type: F Protection class: IP 23 Isdjwf Rgxspfx Af Tstb

Stanje: rabljeno, Scrubber dryer, floor cleaning machine, sweeper - Delivery in as-is condition as inspected - Machine is supplied without battery, brush, and squeegee - Working width: 500 mm Itsdpfoc R S E Sjx Af Teb - Battery charger included - Quantity: 1 unit available - Dimensions: 1150/520/H950 mm - Weight without battery: 66 kg

Stanje: rabljeno, Magnetic drilling machine, hand-held drill - Magnetic base: Magnetor type PS 32 L - Drill unit: AEG type HBE-IV - Shank: Morse taper 2 (MT2) Itsdpfx Ajfc R D Aef Teb - Max. drill diameter: Ø 23 mm - Power supply: 265 V / 200 Hz - Dimensions: 700 x 300 x H 670 mm - Weight: 49 kg

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), There are 5 identical welding machines available. Mains voltage: 400V (50/60Hz), fuse: 25A, power consumption: 22kVA, cos phi: 0.8, adjustment range: 40-400A, working voltage: 16-34V, open-circuit voltage: 19-55V, voltage steps: 2x12, duty cycle (40°C): 60% 360A/32V, 100% 250A/26.5V, protection class: IP 23, insulation class: H (180°C), cooling type: F. Weight: gas-cooled 153kg, water-cooled 161kg. Dimensions (LxWxH): 1040mm x 460mm x 935mm. Two coarse levels, 12 fine levels, high-performance 4-roll wire feed, 140W, feed speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 inductance outlets for adaptation to the welding task, MC 15 control unit as a compact, easily replaceable control box. Features: wire feed speed (constantly regulated), wire creep start, burn-back time, 2/4-stroke operation, wire threading (without current and gas), low-noise fan (thermostat controlled for gas-cooled units), thermal overload protection, central connection socket for welding torch. On-site inspection is possible. Ijdpfxexdda Hs Af Tstb

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 03890317, Machine number: 03890317 // Condition and details as per images Itsdpfx Ajt A A Aqef Tsb

Leto izdelave: 2000, Stanje: rabljeno, TIG welding machine, direct current, 380 Volts, suitable for stainless steel Itodpfx Aegt Auuof Teb Arkoquad 220, 40% duty cycle at 220 A, 10% duty cycle at 140 A, complete with torch, ground cable, pressure reducer, and water cooling.

Leto izdelave: 2012, Stanje: pripravljen za uporabo (rabljen), Na voljo je laminirna naprava Autobond za ploščate in toplotno odporne izdelke. Hitrost laminacije: 60 m/min, min. dimenzije pol X/Y: 285 mm/320 mm, maks. dimenzije pol X/Y: 1060 mm/1060 mm, razpon gramature papirja: 90g-650g/m², min. debelina laminirne folije: 24 µm, maks. pritisk valja: 6 t, maks. temperatura grelca/krmiljenja: 140°C/135°C. Dimenzije stroja X/Y: cca. 4000 mm/1600 mm, teža: cca. 2000 kg, delovne ure: 28785 h. Dokumentacija na voljo. Ogled na lokaciji je možen. Iedpfx Afjxbrw Us Tjtb

Stanje: zelo dobro (rabljeno), water-cooled, foot-operated rocker arm spot welding machine Manufacturer: DALEX Model: SF 8/71 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA Secondary open-circuit voltage: 2.0 - 3.2 V Iedpfxjp H T Awe Af Totb Electrode force: 52-235 daN Arm gap: 140 mm Throat depth: adjustable from 80 to 300 mm with 4-step selector switch Single-time asynchronous welding controller, current time 2-100 periods