Varilni stroj TIG

H.W. Hermann GmbH SHARC 320 T DC

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine designed for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In practical use, the SHARC process achieves higher welding speeds while simultaneously improving weld quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration of the workpiece, lower hardening of the transition zones, and, if required, dispensing with additional filler materials). --> Technical data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 - 320 A Gisdpfx Aaswf Rg Es Usu Electrode adjustment range: 25 - 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power consumption: 23 kVA Duty cycle at 60%: 320 Duty cycle at 100%: 260 Cooling type: F Protection class: IP 23

Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 05542, Offer 25128 Technical Data: - Rated power at 50% duty cycle: 25 kVA - Maximum welding power: 68 kVA - Throat depth adjustable: 280 to 450 mm Gijdpfxown Emls Aa Usu - Stroke: 5 to 40 mm - Welding capacity for sheet steel approx.: 3 + 3 mm - Electrode force adjustable up to: 240 daN - Required air pressure: 6 bar - Cooling water flow: 4 l/min - Connection: 400 V - Space requirement approx.: W 800 x H 1700 x D 1050 mm - Weight approx.: 220 kg - Equipped with: - Single-phase controller T 90 Mark II - Electric foot switch - Separate cooling water recirculator

Stanje: rabljeno, Leto izdelave: 2007, Machine weight approx. 290 kg Gedewf Rgrjpfx Aa Uoiu Space requirement approx. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding machine for direct current welding (DC version) and for both direct and alternating current welding (AC/DC version), based on an innovative arc shaping process developed by Hermann GmbH. In operation, the SHARC process enables higher welding speeds while simultaneously improving seam quality and reducing ancillary welding costs (less distortion, improved penetration, reduced discoloration on the workpiece, lower hardening of the transitional edge zones, and, if necessary, elimination of filler materials). --> Technical Data Welding current type: DC Mains voltage (50/60 Hz): 400 V Phases: 3 Adjustment range: 10 – 320 A Adjustment range electrode: 25 – 280 A Welding voltage: 22 V Open circuit voltage without HF: 70 V Open circuit voltage with HF: 90 V Primary power: 23 kVA Duty cycle 60%: 320 Duty cycle 100%: 260 Cooling type: F Protection class: IP 23

Leto izdelave: 2000, stanje: rabljeno, TIG welding machine, direct current, 380 Volts, suitable for stainless steel Arkoquad 220, 40% duty cycle at 220 A, 10% duty cycle at 140 A, complete with torch, ground cable, pressure reducer, and water cooling. Gedpsgt Auusfx Aa Usiu

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Varilni aparat Carl Cloos GLC 503 Quinto SD. Skupaj so na voljo 4 naprave. Leto izdelave: 2004-2004-1999. Cena velja za 1 napravo. Gjdpetkuk Rsfx Aa Ueiu

Stanje: zelo dobro (rabljeno), Roll seam welding machine in longitudinal seam design Make: DALEX Model: PMS 11-4 Nl Throat depth: 350 mm Rated power at 50% duty cycle: 80 kVA Secondary short-circuit current: 23 kA Gjdpfxetxl Ivs Aa Usiu Secondary open-circuit voltage: 3.5 - 4.26 V with 2-step switch (High/Low range) Electrode force: 80-600 daN with mounted control cabinet according to VDE 0100 Main disconnect switch Synchronous welding control 8036 Weight: 635 kg Sample photo – Machine is still being refurbished

Stanje: rabljeno, Leto izdelave: 1975, številka stroja/vozila: 12138/4, Rated power: 20 kVA Throat depth: 250 - 600 mm Electrode arm spacing: 270 mm Gedpfx Aob Nvimja Usiu Welding capacity (steel): approx. 2.5 + 2.5 mm, max. 3.5 - 1.5 mm Electrical connection: 380 V, kW Space requirements: 470 x 1170 x 1300 mm Weight: 210 kg

Leto izdelave: 1970, stanje: rabljeno, Spot welding machine Manufacturer: Dalex Godpjk Tt Hfefx Aa Uoiu Model: SF 16 Continuous power: 16 kVA at 50% duty cycle

Stanje: dober (rabljeno), High-performance spot welding machine in 3-phase DC configuration DALEX, type PMS 14-4 G3 Arm reach: 550 mm Rated power at 50% duty cycle: 240 kVA Secondary short-circuit current: 89.5 kA Secondary open-circuit voltage: 4.69 – 9.38 V Electrode force: 80–1200 daN with double-stroke cylinder and approach stroke Gisdpfx Aegqxg Aoa Uju Lower arm support Weight: 1,660 kg Mounted control cabinet according to VDE 0100 Main switch 4-step switch Synchronous dual-circuit welding control 8036 S3 Machine is currently being overhauled

Stanje: rabljeno, Dalex-Werke Pms 10-2 380V 50Hz Godjg Rcpxepfx Aa Ujiu Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Rated primary voltage: 380 V - 50 Hz Open-circuit voltage: 5.6 V Electrode force: 65–390 daN Machine weight: 341 kg