Transportni voziček za platformo industrije

Stapler Center Fritz GmbH TPW 10 AL - AS

Stanje: novo, Leto izdelave: 2024, SINGLE-BLADE TRIMMER useful cutting length from 4.2 to 8.2 m Hsdpfsfw Nv Rex Afwoff maximum cutting thickness 160 mm parallel guide sawdust hopper

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Nosilnost: največ 1.500 kg Območje debeline žice: 0,5 - 8,0 mm Hodpfxjvam Iis Afwoff Zunanji premer tuljave: največ 1.000 mm Notranji premer tuljave: najmanj 300 mm Število obratov: 0 - 80 obr/min

Stanje: rabljeno, Leto izdelave: 2007, številka stroja/vozila: 001669, Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outer diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Hodehigmbopfx Afwsff Decoiler with auxiliary drive and brake Fixed coil loading saddle + decoiler traversing device Included: High-Performance Precision Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine No.: 001669 Maximum pass-through width: 620 mm Number of straightening rolls: 9 Straightening roll diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rolls are multi-point supported against deflection All rolls driven via distribution gearbox and cardan shafts. Used, as-is ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data available shortly or on request.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 804, dolžina valja: 2.550 mm, delovna širina: 2.500 mm, najv. debelina pločevine: 16 mm, najv. debelina jeklene pločevine: 16 mm, skupna masa: 12.500 kg, 3-roll plate bending machine 2500 x 16 mm, hydraulic Manufacturer: KUMLA Model: PV 7 H Serial No.: 804, overhauled in 1987 The machine features a very robust construction and has only been used in single-shift operation. Max. bending length: 2500 mm Max. sheet thickness: 16 mm Cone bending device Top roll diameter: 324 mm Lower roll diameter: 305 mm Hydraulic adjustment of the rolls Dimensions: Hfodpfxjvxbm Ro Afwef L x W x H = 5000 x 1600 x 1900 mm Working height: 1000 mm Additionally, a stair frame around the machine can be purchased.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Manufacturer: Elumatec Type SA / SAS 142 Year of Retrofit: 2024 Max. Carbide Saw Blade Diameter: 500 mm Saw Motor Power: 4 kW Saw Motor Speed: 2800 rpm Saw Blade Cutting Speed (500 mm): 4400 m/min Saw Height Adjustment: Infinitely variable, fully electronic Working Area Square 90° max.: 130 x 130 mm Working Area Flat 90° max.: 190 x 130 mm Working Area Round 90° max.: 150 mm Pneumatic Feed Length: 5–560, 10–1120 mm Compressed Air Connection Required: 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900 mm x 1400 mm x 1500 mm Footprint LxW: 2900 mm x 1400 mm Additional Description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics Following the completed retrofit, the machine is in as-new condition both technically and visually. The machine is completely overhauled at our facility to customer specifications. Among other upgrades, the following components have been renewed: - Conversion to Siemens S7 PLC control - Upgrade to Siemens HMI operator panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve assemblies - Maintenance of minimum lubrication system - Replacement of general wear parts - Refurbishment of the safety enclosure Warranty: Hfsdpeuiy Nyefx Afwsf Unless otherwise agreed, we provide a 6-month warranty on all parts refurbished or replaced by us. Labor and wear parts are excluded from the warranty. Optional: - Extension of the cutting range for flats at 90° max.: 300 x 120 mm - Spacer extension (for a premium cut surface without drag marks) - Servo-driven material feed - Servo-driven saw blade feed - Heavy-duty clamping device for material feed pusher - Delivery and installation at your facility - Operator training for your staff

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, številka stroja/vozila: NOH366, ABUS ELV žerjavna steza, mostni žerjav, halni žerjav, žerjav Žerjav je na voljo 3x v enaki izvedbi! Nosilnost / dvižna kapaciteta 5t - 5000 kg Tirnica 14.260 mm, zunanja mera cca 14.500 mm Leto izdelave 2003 z brezžičnim upravljanjem in talnim rezervnim upravljanjem Dvižna višina 6m Gradbena višina zgornji rob žerjava do kljuke cca 900 mm Dolžina glavnega nosilca z blažilnikom cca 280 cm Dodatni podatki sledijo Žerjav je razstavljen in takoj na voljo Hsdpfxextyvps Afweff Zelo dobro stanje, preizkusna knjiga je na voljo Na voljo so tudi stebrni in stenski vrtljivi žerjavi Demag KBK in Abus HB sistemi ter Errikla, Hadef, Stahl KT 2000 itd. Dostava po prevozniku je možna, prosimo povprašajte glede na poštno številko Prevzem osebno je zaželen

Stanje: novo, Leto izdelave: 2025, Model: K110 K230 K360 Območje dela: od 8649×1398×1811 mm do 10000×3500×2100 mm Izhodna moč laserja: 3000 W / 2000 W / 1500 W / 1000 W Natančnost pozicioniranja osi X/Y: 0,05 mm Ponovna natančnost pozicioniranja osi X/Y: 0,03 mm Maks. hitrost povezanega gibanja osi X/Y: 60 m/min 1. Integrirana popolna zaščitna kabina Integrirana zasnova zaščitnega pokrova, Hfedpfxsg Rgt Ue Afwsf hitra namestitev na lokaciji bistveno skrajša čas inštalacije. 2. Bodor Genius T avtomatska ostrilna laserska glava z iglo Laserska glava Bodor Genius T z avtomatskim ostrenjem in igelno konico, primerna za vse vrste profilov, kot so kotniki, U-profili, I-profil itd. 3. Pravokotno varjeno ležišče Enostavna struktura in prilagodljiva postavitev. 4. Bodor Thinker 3.0 sistem Namenski nadzorni sistem za stroje za razrez cevi z najsodobnejšo tehnologijo. Omogoča neposreden razrez kotnikov in U-profilov brez potrebo po optimizaciji postavitve (nestingu) in vračanju v izhodiščni položaj. 5. Primerno za manjše premer vpenjanja Zadnje čeljusti lahko primejo cev in jo speljejo skozi sprednje vpenjalo, s čimer se fizična razdalja med lasersko glavo in zadnjimi čeljustmi občutno zmanjša. Repni ostanek je zmanjšan na 70 mm, izkoristek materiala se poveča na 99 %. 6. Ergonomija Natovarjanje in upravljanje z obeh strani; humaniziran interakcijski vmesnik omogoča udobno in enostavno uporabo ter prijetno uporabniško izkušnjo. 7. Integrirana zasnova Integrirana zasnova elektro omarice in glavnega ohišja prihrani prostor in standardizira napeljavo.

Stanje: novo, Glazing Bead Stapling Machine "2 P Jumbo Automatic E.C." - New - Your Benefits: - Corner joints are closed - No open glazing bead joints - No color differences when painting - Glazing bead frames are easy to assign Staple Corner Jointing Machine 2P Jumbo Automatic E.C. for stapling glazing bead frames. Selectable between automatic and manual operation; With angle stop, clamping device from above and front Hfodjvnh T Njpfx Afwsf Pressure is individually adjustable. Insertion of parallel and overlapping staples possible via electronic control programming. Stapler can be mounted on a suitable work table, operation via foot pedal. ----- Price for this configuration on request! Plus statutory VAT as well as packaging/shipping ----- Images show the Staple Corner Jointing Machine 2P with the optional mobile worktable (see details under additional charges) Additional charges: ----- Mobile worktable Height adjustable from 700 - 1000 mm, 2 detachable support rails, 1000 mm long, 2 pivoting and sliding support rails 1000 mm, support rails covered with felt, 4 swivel castors, 2 of which with brakes. ----- Surcharge: 1,321.00 Euro net Staples: packages 15 mm staples (package of 2,000 pcs): Price 22.00 Euro 12 mm staples (package of 3,000 pcs): Price 32.00 Euro 10 mm staples (package of 3,000 pcs): Price 32.00 Euro Dimensions and Weights ----- Jumbo Automatic E.C. 470 x 370 x 300 mm, 35 kg Work table 32 kg All prices net. Plus statutory VAT. Ex works plus packaging and shipping (Technical data according to manufacturer – no guarantee!)

Stanje: novo, Leto izdelave: 2025, Knife grinding machine with rotary magnetic table, 1200 mm, infinitely variable carriage speed, automatic grinding wheel feed, fixture for grinding up to 4 planer blades Hfjdpfx Afewamkvjwsf

Stanje: zelo dobro (rabljeno), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 500 mm, dolžina pomika po osi Y: 400 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 2.500 obr/min, dolžina mize: 790 mm, širina mize: 460 mm, Table size 790 x 460 mm Longitudinal travel 500 mm Cross travel 400 mm Vertical travel 400 mm Hfodpfx Ajwffymjfwof Spindle travel 90 mm Spindle taper ISO 40 Spindle speeds 50 - 2,500 rpm