Schoen Ute/B20 nakup rabljenega (1.014)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Relevantnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum vnosa
- Najstarejši oglasi
- Datum vnosa
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Posodobitev
- Najstarejša posodobitev
- Posodobitev
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- relevantnost
- relevantnost
Mali oglas
Neckartailfingen
511 km
Drobilnik lesa
mütek SystemtechnikMRZ 630
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine
Another unit available immediately (ex works Neckartailfingen)
Approx. 8 operating hours.
Suitable for shredding all types of residual wood and pallet offcuts.
Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it.
A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket.
Throughput up to 200 kg per hour (*depending on screen size and material preparation).
*Discharge conveyor and overband magnet available at additional cost.
+ Powerful 18.5 kW motor
+ Concave blades
+ Heavy-duty large gearbox
+ Special load-dependent ram control system
Commodity code: 84659600
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase
Blades: 15 pieces, multiple-use (reversible)
Option: Double blade row + €995 net
Rotor diameter: 260 mm
Control: Siemens S7-1200 PLC
Cutting chamber opening: 630 x 820 mm
Fill volume: approx. 0.6 m³
Hydraulically actuated ram
Screen perforation as requested (10–30mm)
Extraction outlet Ø 160 mm
Weight: approx. 1,300 kg (depending on configuration)
Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm
Moisture content: < 30% oven dry
Standard equipment includes:
- V-rotor for maximum throughput
- Control cabinet with Siemens PLC
- Automatic star-delta starter
- High-speed hydraulics
- Automatic shut-off in case of rotor idle
- 70–90 rpm for high throughput
- Cycle control to avoid idle times
- Performance-boosting step control of the hydraulic ram
- Pertinax guides for hydraulic ram
- Vibration-damping machine feet
- CE compliant
- MADE IN GERMANY
Shredder options:
- Raise shredder by 30 cm (preparation for conveyor) + €2,080 net
- Angled conveyor belt + €8,770 net
Horizontal part: 1200 mm
Inclined part: 2500 mm
Adjustable angle: 0–60 degrees
Discharge height: approx. 2000 mm (+/- 100 mm)
- Overband magnet + €5,980 net
- Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder)
- Extended hopper + €940 net
- Eco rings: + €1,980 net (recommended for more than 15% hardwood content)
- Special scraper + €990 net (recommended for veneer or paper)
- Double blade row + €995 net
Raw material requirements:
Nedpfedwktkox Afmocu
- Moisture content (oven dry) must be below 30%
- Metal or mineral contaminants such as sand, stones, etc., increase wear.
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje stiropora
mütekMSZ 600
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, Ideal for shredding polystyrene (EPS) or similar materials.
Throughput is highly dependent on screen and input material:
- Up to 60 kg/h with EPS using a 15 mm screen
*The coarser the screen, the higher the throughput.
Motor: 9.2 / 11 kW, 400 Volt
Robust steel construction
Hardened cutting blades
Screen with interchangeable inserts, optionally available in (8), (10), 15, 22, 26, 30, 40, or 60 mm perforations
Ncodpfxjh S H T Us Afmou
With electric drive: star-delta switch, overload protection, and 8 m power cable – plug-ready
Blow-out nozzle 150 mm, optional for plastic or grain pipes
Blowing range approx. 12 m
Chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires
Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm
Weight: approx. 240 kg
Spare parts and options:
24 hardened blades, each €9.90 (net)
6 bolts, each €14.90 (net)
1 screen €475 (net)
Cover €290 (net)
Mali oglas
Neckartailfingen
511 km
Ekstrakcijski sistem z briketirno stiskalnico
mütekMPP 60 + Entstauber, Absaugung MMJET350
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for trade fair demonstration unit
*Available upon request
New:
With the frequency inverter option, eligible for up to a maximum of 45% government funding
Combination of:
mütek Briquetting Press MPP 60 + Extraction Unit MMJET 350
*Approved for indoor installation
*Both individual machines are fully produced and in stock; only need to be connected together
1. Technical Data – Briquetting Press:
Our best-selling briquetting press – the classic model.
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, continuous development, and know-how
+ Several thousand machines in operation with satisfied customers
+ Excellent price-performance ratio
Customs tariff number: 84793010
Briquette diameter: 50 mm
Nsdpjd Su Hxjfx Afmecu
Front sleeve: 50 mm
Max. briquette stroke: 40 mm
Optimal briquette stroke: 40 mm
Throughput capacity (material-dependent): up to 60 kg/h*
*depending on bulk density
*based on a bulk density of 200 kg per cubic meter
Motor power: 5.5 kW,
400 Volt / 50 Hz / 3-phase
Total system footprint:
2.2 x 1.1 x 2.8 m (LxWxH)
Height: 2.8 m (special container)
Delivery also possible in 2 components
Weight: approx. 1200 kg
Oil volume: 110 liters
Silo diameter: 1000 mm
Pump: 27 liters
Hydraulic pre-compressor
Option - press plier cooling: no
Option - hydraulic oil cooling: yes
Option - level monitoring: yes
CE compliant
2. Technical Data – Clean Air Extraction Unit MMJET 350:
Extraction connection diameter: 350 mm
Motor: 11 kW
Extraction nozzle on the left (when facing the dust bin)
Residual dust content:
Mali oglas
Neckartailfingen
511 km
Briketna stiskalnica / briketna stiskalnica
mütek SystemtechnikMPP 110
Pokliči
Stanje: novo, Leto izdelave: 2026, Production time for the machine approx. 3.5 months
Very robust machine with high pressing force
- Also suitable for already producing a saleable briquette quality, depending on the material. The large-dimensioned press cylinder and the 65 mm briquette diameter make this possible.
Our best-selling briquetting press series
+ Proven, simple technology for extremely low susceptibility to faults
+ 25 years of experience, ongoing development and expertise
+ Several thousand machines in use with satisfied customers
+ Good price-performance ratio
Options:
Surcharge for cooling unit + €3,995 net (can also be retrofitted)
* cools the pressing tongs (important from 3.5 hours of operation) and the hydraulic oil
* Cooling unit recommended for regular operation of more than 3.5 hours at a stretch.
Large pre-compactor chamber + €1,975 net
Recommended for lightweight input materials such as planing shavings
Customs tariff number: 84793010
Briquette diameter: 65 mm
Front bushing: 65 mm
Max. briquette stroke: 50 mm
Optimal briquette stroke: 50 mm
Capacity (depending on material): up to 110 kg/h*
Last test: approx. 87 kg/h
*Depending on bulk density
*Based on a bulk density of 200 kg per cubic meter
.
Motor power: 5.5 kW
400 Volt / 50 Hz / 3-phase
Length: 1,925 mm
Width: 1,100 mm
Height: 1,500 mm
Ncsdpeffh Atsfx Afmeu
Weight: 800 kg
Oil volume: 110 liters
Silo diameter: 1,000 mm
Silo capacity: approx. 0.7 m³
Pump: 37 liters
Hydraulic pre-compactor
Press tong cooling option: yes, with special accessory of coolable press tongs
Cooling of the press tongs via a water tank (must be supplied by the customer)
Hydraulic oil cooling option: yes
Fill level monitoring option: yes
Continuous briquette option: yes (material-dependent)
CE compliant
.
Requirements for the raw material:
- The moisture content (oven dry basis) must be at least 6% and no more than 18%
- Maximum chip length: 15 mm
- Installation temperature: heated room of at least +5°C
- The feed material must be free of metal and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Briketirna stiskalnica Briketirna stiskalnica za aluminij
mütekMPP NEM 90
Pokliči
Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, All wear parts new
only 704 operating hours
Special price for lightly used demonstration machine
Base machine: €29,990 net
Options at extra cost:
- Cooling unit: €3,995 net
- Emulsion tank: €3,990 net
The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminium, copper, brass, bronze, graphite and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterised by a robust design that ensures consistent briquette quality during continuous operation. The compaction process is carried out without the addition of binding agents, relying solely on hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%.
Throughput capacity: up to max. 70 kg/h (material-dependent),
Briquette diameter: Ø 50 mm,
Motor: 5.5 kW,
400 Volt / 50 Hz / 3 phase,
Pump: 40 litres
Max. briquette length: 50 mm,
Optimal briquette length: 40 mm,
Silo diameter: 1,000 mm,
Ncodod N Dnhjpfx Afmsu
Oil tank: 110 litres
Dimensions: 1750 x 1130 x 1100 mm (L x W x H)
Weight: 950 kg
Hydraulic pre-compaction via slide
Main press cylinder
Vertical cylinder
Fill level sensor: yes
Requirements for the input material
- Max. chip length: 15 mm
- Installation temperature: temperature-controlled room at a minimum of +5°C
- Max. weight on agitator: 150 kg
- The feed material must be free from ferrous metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may result
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMFP 30
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine available at a special price
Another machine immediately available (ex works Neckartailfingen)
* Includes 1-year warranty.
Your advantages:
+ Very robust, straightforward technology
+ Excellent value for money
+ Suitable for continuous operation
+ Long-established, reliable machine
Includes control cabinet with timer operation
The press is manually activated and then runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically.
Technical data:
Briquette dimensions: approx. 30 x 30 mm (square)
Briquette length: 5-40 mm (material-dependent)
Throughput capacity: up to 20 kg/h max. (material-dependent)
Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H)
Machine weight: approx. 250 kg
Silo capacity: approx. 250 litres
Motor: 2.2 kW, 400 V - 50 Hz
Noise emission: 62 dB
Material requirements:
- Wood shavings and dust smaller than 15 mm in length
- Moisture content less than 18% ATRO
- Sand, stones, metals, and minerals accelerate wear
---
Options at extra cost:
- Timer function + €490 (net)
Machine is started manually and switches off automatically after set time X.
Njdpsd Nnwlofx Afmecu
- Fill level sensor for automatic operation + €1,450 (net)
Press starts and stops automatically
* NEW!!! Now available in 230 Volt,
Motor then 3 kW instead of 2.2 kW,
Surcharge + €890 (net) (delivery time approx. 8 weeks)
- Special pressing units + €2,950 (net)
---
Mali oglas
Neckartailfingen
511 km
Granulator, granulator za plastiko
mütekMVZ 7,5 kW
Pokliči
Leto izdelave: 2025, stanje: novo, Granulator MVZ 7.5 kW
Demonstration unit available at special price
Our Granulator MVZ 7.5 is suitable for shredding thin-walled plastic parts or for the secondary size reduction of wood chips. More details can be provided after testing with your material.
Our granulators are used for size reduction of a wide range of materials, such as plastics or wood. Shredders and granulators are suitable for a variety of shredding tasks.
For example, in injection molding machines, scrap parts and sprues are produced that need to be recycled. In blow molding machines, along with scrap parts, trim waste or start-up parisons must be processed. Materials such as PET bottles, PE/PP bottles, canisters or buckets, and pipes from blow molding can be processed.
Material is fed from above via a hopper into the grinding chamber of the granulator. The internal rotor is equipped with knives. The material is shredded between the rotating knives and the stationary knives mounted in the grinding chamber housing until it passes, as defined regrind, through the screen located below the rotor. *Option: The ground material is usually pneumatically conveyed to big bags, silos, or other containers.
The price applies only to the size reduction unit as shown in image 1
- Fan, cyclone, and filter are optional components.
---
Technical Data:
Granulator MVZ 7.5 kW
Motor: 7.5 kW
*Larger machines available on request (4 to 75 kW)
Throughput up to 120 kg/h when shredding plastics *highly dependent on screen size and material
Application example: Shredding of PE 1000 plastic
Input material: approx. 40 mm chip length
Secondary shredding to approx. 6 mm
Throughput up to 50 kg/h with a 6 mm screen
(Throughput up to 80 kg/h with an 8 mm screen)
___
Significantly higher throughputs can be achieved when re-shredding G 30 wood chips.
Up to a maximum of 400 kg/h with a 10 mm screen
*metered feed, e.g., via conveyor belt or auger.
Details available after a test run with approx. 30 kg.
Rotor diameter: 180 mm
6 rotor knives, each 225 mm
4 stator knives, each 225 mm
Dimensions: 930 x 730 x 1420 mm
Weight: 450 kg
Suction nozzle: 100 mm
Screens: 5, 6, 8, 10, 12, and 15 mm – other sizes available on request
Price per screen: €390
Price for replacement knife set: €679
Suitable for example for:
- All types of plastic waste
Various materials – HDPE, LDPE, PP, PS, PC, PA
- Biomass
- Wood
- Herbs
etc.
Parts from injection molding, blow molding, injection molding scrap, small bottles, cables, small pipes, profiles, etc.
---
Larger units available as options:
Granulator MVZ / 18.5 kW
Throughput up to 350 kg/h *dependent on screen and material
Opening: 620 x 400 mm
*optional with matching extraction/conveying system
Granulator MVZ / 30 kW
Throughput up to 400 kg/h *dependent on screen and material
Opening: 620 x 500 mm
*optional with matching extraction/conveying system
---
To select the right machine, the following information is required:
- Length x width x height of the feed material?
- Required screen size (final output size in mm)?
- Required throughput per hour in kg?
Ncedpfsd N Dn Dox Afmeu
- Wall thickness in mm?
- Material description
Photos can also be helpful
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje
mütekMRZ 530 ECO - 15 kW
Pokliči
Stanje: novo, Leto izdelave: 2026, Single-Shaft Shredder MRZ 530
Included:
+ Profile rotor for increased throughput performance
Options:
Double knife row + €895 net
Veneer and paper stripper + €970 net
* recommended for extremely thin materials with a thickness less than 3 mm
Our mütek single-shaft shredder MRZ 530 processes a wide range of materials such as all types of wood waste, softwood, chipboard and hardboard, pallets, construction timber, demolition wood, carpet, cables, paper, cardboard, and plastics. The machine is characterized by its robust construction, which guarantees consistent quality during continuous operation.
We are happy to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material via freight carrier, and we will document the test with photos and videos.
Machine data:
Motor: 15 kW; 400 V - 50 Hz - 3 ph,
Knives: reversible multiple times,
Rotor diameter: 260 mm,
Control: Siemens S7-1200 PLC,
Ncodpfod Db N Isx Afmeu
Hopper (mm): 510 x 810 mm,
Hopper volume approx. 0.4 cbm,
Throughput capacity: 1 – 5 hopper fillings/h,
Hydraulically operated pusher,
Screen perforation as required (10 – 40 mm),
Suction connection Ø 160 mm,
Weight approx. 1,000 kg,
Dimensions approx. 1550 x 1100 x 1640 mm,
Moisture content of raw material: must be below 30% absolutely dry.
Standard features:
• Fast hydraulic system
• Profile rotor
• Control cabinet with Siemens PLC control
• Automatic star-delta start-up
• Automatic shutdown in case of idling rotor
• Removable extraction chute
• Rotation speed 70 – 100 rpm for higher throughput
• Intermittent control to avoid idle times
• Performance-enhancing step control of the hydraulic pusher
• Stable guides for the hydraulic pusher
Additional shredder options:
- Raise shredder by 30 cm (preparation for conveyor belt) + €1,980 net
- Angled conveyor belt + €8,770 net
Horizontal section: 1200 mm
Inclined section: 2500 mm
Angle: adjustable 0-60 degrees
Discharge height: approx. 2000 mm
+/- 100 mm
- Overband magnet + €5,980 net
- Synchronised control for conveyor and overband magnet + €2,750 net
(Start and stop synchronised with the shredder)
Requirements for input or raw material:
- Moisture content (absolutely dry) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc., cause increased wear
Mali oglas
Neckartailfingen
511 km
Drobilec lesa, drobilec, sekljalnik
mütekMRZ 830 ECO
Pokliči
Stanje: novo, Leto izdelave: 2026, Delivery time approx. 3-4 months
Shredder MRZ 830
Commodity code: 84659600
Feed opening: 800x1000 mm
Motor: 18.5/22 kW; 400 V - 50 Hz - 3 phase
Blades: multiple cutting edges (reversible)
Hydraulically operated pusher
Screen perforation size as desired (10–40 mm)
Extraction nozzle Ø 200 mm
Weight approx. 1,600 kg
Dimensions (LxWxH) approx. 2290 x 1420 x 1750 mm
Turbo coupling
Standard features included:
- Automatic star/delta start
- High-speed hydraulics
- Automatic shut-off when the rotor runs idle
- Rotor speed 70–90 rpm for high throughput
- Intermittent control to avoid idle times
- Performance-enhancing step control of the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE conform
The shredder is designed for processing solid wood, chipboard, MDF panels, and other materials upon testing and approval by the manufacturer.
Additional shredder options:
- Height increase by 30 cm (preparation for conveyor belt) + €2,140 net
- Angled conveyor belt + €8,770 net
Horizontal section: 1200 mm
Inclined section: 2500 mm
Angle: adjustable from 0–60 degrees
Discharge height: approx. 2000 mm (+/- 100 mm)
- Overband magnet + €5,980 net
- Controls for conveyor and overband magnet + €2,750 net
(Start and stop synchronized with shredder)
Ncodped Dgw Usfx Afmsu
Raw material requirements:
- Moisture content (atro) must be below 30%
- Installation temperature: heated room, minimum +5°C
- Metals and mineral contaminants such as sand, stones, etc. increase wear
Mali oglas
Neckartailfingen
511 km
Drobilnik lesa
mütekMGZ 630
Pokliči
Stanje: novo, Leto izdelave: 2025, The ideal machine for shredding both hardwood and softwood
Another machine, available immediately (ex works Neckartailfingen)
Nsdpfx Ajd E R D Sjfmscu
.
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase,
Blades: 14+2 pieces, 40x40 mm, multiple cutting edges (rotatable),
Rotor diameter: 260 mm,
Control: Omron PLC,
Cutting chamber opening: 600 x 800 mm,
Hopper volume approx. 0.6 m³,
Hydraulically operated pusher
Screen perforation of your choice (12 - 40 mm)
Extraction port Ø 160 mm
Weight approx. 1,300 kg
Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm
.
The following options are available at extra cost:
- Additional blade row + €1,990 net (28 instead of 14)
- Surcharge for segmented floor, 4-sided + €2,170 net
(Prevents the pusher from jamming. Recommended for material thickness less than 3 mm)
- Shredder height increase by 30 cm (for conveyor belt integration) + €1,980 net
- Angle conveyor (discharge height approx. 220 cm) + €8,770 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(synchronized start/stop with the shredder)
- Special bearing + €1,540 net (rarely needed. Sealed, even more robust rotor bearing. worth considering for screens below 15 mm and/or high fines content. Not necessary if bearings are lubricated with grease approximately every 2 weeks in operation)
.
Requirements for raw material:
- The moisture content (atro) must be below 30%
- Metals and mineral contaminants such as sand, stones, etc. will lead to increased wear.
.
We are happy to offer a free test using your material. For this, we invite you to visit us in Neckartailfingen. Alternatively, you may send your material to us by freight and we will document the test process with photos and videos.
Mali oglas
Neckartailfingen
511 km
Drobilnik, drobilnik palet
mütekMGZ 1030
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine with special rotor
available immediately
Advantages:
+ special rotor with reduced knife overhang
+ 22 kW motor
+ efficient square knives
*For pallets: up to 10 pallets per hour *Depending on screen and material. Significantly more for smaller wood off-cuts.
Motor: 22 kW; 400 V - 50 Hz - 3 phase
Screen: 15/20 mm
Hydraulically operated pusher
Screen perforation currently (15/20 mm) *can be exchanged
Suction nozzle Ø 200 mm
Feed opening 1000x1000 mm
Dimensions: 2000x1800x1645 mm
Sample image above: Plant color may vary
Weight: 1920 kg
Standard features:
- Control cabinet with PLC control
- Automatic star/delta start-up
- Fast hydraulics
- Automatic shut-off when rotor runs idle
- Rotational speed 70-90 rpm for high throughput
- Cycle control to avoid idle times
- Performance-enhancing step control of the hydraulic pusher
- Pertinax guides for hydraulic pusher
- Vibration-damping machine feet
- CE compliant
The following options are available at extra cost:
*See last 2 images.
- Additional knife row + €2,790
- Segment floor + €6,890
(recommended for materials with wall thickness less than 3 mm)
- Special K-rotor bearing + €3,480
(May be considered for plastic shredding with screens smaller than 15 mm or high fine proportion. Not required if lubricating the bearings with grease every 4 weeks in operation)
- Raise shredder height by 30 cm (preparation for conveyor belt) + €2,480 net
- Angled conveyor belt (discharge height approx. 220 cm) + €12,980 net
- Overband magnet + €5,980 net
- Control for conveyor belt and overband magnet + €2,750 net
(Start and stop synchronized with shredder)
- Extended feed hopper 1500x1500 mm + €3,480 net
Raw material requirements:
Ncjdpfx Aodv Eu Hsfmju
- Moisture content (atro) must be below 30%
- Feed material must be free from metals and mineral impurities. Damage to the tools and/or increased wear may otherwise result.
Mali oglas
Neckartailfingen
511 km
Balirka s sistemom za odsesavanje prahu
mütek
Pokliči
Leto izdelave: 2024, stanje: novo, Overview – The different variants
*Not every option is required:
Optional:
- Bale breaker MHB from €24,990 net
- Straw mill MHZ from €7,980 net
- Special hopper €970 net
- Cyclone from €3,750 net
- Sheet metal silo demo unit with discharge (only sketched in photo)
*optional, if you want to feed with a wheel loader
Unit price net from €14,750 – demo unit
- De-dusting screw conveyor – length approx. 4m
Equipped with 4 screens on the bottom that are extracted/suctioned.
Unit price net from: €9,750
- Extraction components/hoses flat rate €945 net
- Control for complete installation
Unit price net: €2,750
- Demonstration extraction unit MMJET 160, with cleaning
Connection 160,
Fan 2.2kW
Air flow 1850m³/400V
automatic compressed air cleaning
Unit price net from: €6,950
- Bale press B 400
Bale approx. 400x400x800mm (height adjustable)
Up to 30 bales per hour with approx. 20kg each
from €59,995 net
*A reference installation (bale press) is located at ZIP code 64579 Gernsheim
Technical Data:
Bale size (W x D x H): 400 x 400 x 800mm (height adjustable upon request)
Bale weight approx. 20 kg (depending on material)
Performance: approx. 30 bales per hour
Buffer tank approx. 0.7m³ capacity
Min./max. level sensors in the tank
Hydraulic pre-compressor
Hydraulic pressing ram
Hydraulic power unit, valve block with oil tank
Pump 18.5 kW / 50 liters
Rollers in press channel for easy bale ejection
Dimensions (L x W x H): 3105 x 2830 x 2455 mm
Weight approx. 1,500 kg
mütek bale presses/packaging machines are designed for the production of bales from a variety of materials such as chopped miscanthus or elephant grass, wood shavings, sawdust and chopped straw. The machines are characterized by a robust design, ensuring consistent quality during continuous operation.
The bale press compacts the material loaded into the buffer tank without binder additives by means of hydraulic pressure, and packs the material into plastic bags. The material volume can be greatly reduced with the bale press. The volume reduction ratio depends on the material. The maximum moisture content must not exceed 18% air-dried (ATRO).
The buffer tank of the mütek bale press can be loaded automatically or manually and has a volume of approx. 0.7 m³. Tanks with a larger volume or with integrated extraction and filter units as complete disposal systems are also available. Besides automatic loading via dust extractors, mütek also offers loading by screw conveyors. Both variants can be equipped with automatic dedusting.
mütek bale presses are equipped with a switch cabinet for control.
Ncsdpfx Afjff Sbiomeu
In the standard version, bale dimensions (W x D x H) are 400 x 400 x 800 mm. Height can be customized upon request.
Advantages of producing bales include:
- Simple and safe storage
- No loose dust
- Minimization of storage volume
- Reduced transport volume
*Raw material requirements:
- dry (max. 30% ATRO)
- maximum length 35mm
Mali oglas
Neckartailfingen
511 km
Nadpasovni magnet Blok magnet Magnetni disk
mütekHawk-Eye
Pokliči
Stanje: novo, Leto izdelave: 2026, Extremely powerful industrial magnet for iron separation
Special price: €990 net (Shipping €14.90 net)
*Please refer to image 2 for construction lengths
The active side features a stainless steel end plate (material 1.4301).
Threaded holes are provided on the reverse for mounting *Handle available on request
The block magnet systems can be used up to a maximum operating temperature of +100°C.
The magnet surface should be cleaned regularly of captured iron parts.
Attraction heights for all types, e.g.:
For an M5 steel nut approx. 60 mm
For an M5 x 30 screw approx. 100 mm
Njdpfx Aetqfhxsfmjcu
Mounting Example 1:
Mounted above a conveyor belt, the iron parts "jump" onto the magnetic contact surface.
Mounting Example 2:
Installed in a pipeline system in direct contact with the material flow. For high separation security, a cascade arrangement of several block magnets in series is possible.
Installation and safety instructions:
When handling, even during unpacking and later mounting, ensure that no loose iron parts, such as tools or screws, are nearby.
The magnetic force is so strong that painful injuries can occur if fingers get caught between iron parts and the active surface. No steel parts should be present within a minimum distance of 400 mm underneath the active surface.
Mali oglas
Neckartailfingen
511 km
Uničevalnik kablov, uničevalnik
mütek SystemtechnikMGZ-18,5 KL
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, The ideal machine for shredding cables
Ncodpfxsgmfa As Afmju
including optimized cutting geometry
approx. 9 operating hours
Motor: 18.5 kW; 400 V - 50 Hz - 3 phase,
Blades: 14 pieces, 40x40 mm, reversible multiple times,
Rotor diameter: 260 mm,
Control unit: Omron PLC,
Cutting chamber opening: 600 x 800 mm,
Hopper volume: approx. 0.6 cbm,
Hydraulically operated pusher,
Screen perforation as required (15–40 mm),
Extraction port Ø 160 mm,
Weight: approx. 1,300 kg,
Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm
The following options available at extra cost:
- Double knife row + €1,990 net (28 instead of 14)
- Surcharge for sectional floor, 4-sided + €2,170 net
(Prevents pusher blockage. Recommended when shredding plastics, paper, veneer with thickness < 3 mm).
- Raise shredder by 30 cm (ready for conveyor belt) + €1,980 net
- Angled conveyor belt (discharge height approx. 220 cm) + €8,770 net
- Overband magnet + €6,980 net
- Conveyor belt and overband magnet controls + €2,750 net
(Start and stop synchronized with the shredder)
Bea9ia3l27
Raw material requirements:
- Mineral contamination such as sand, stones, etc., leads to increased wear.
We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can ship your material to us via freight forwarder, and we will document the test with photos and videos.
Mali oglas
Neckartailfingen
511 km
Stiskalnica za briketiranje
mütekMAP 1200
Pokliči
Stanje: dober (rabljeno), Refurbished used machine
*Options at extra cost, see below
with full 1-year warranty
Delivery time approx. 16 weeks after order
Technical specifications:
Throughput capacity up to max. 1,200 kg/h, depending on material
(e.g. sawdust with a bulk density of 180 kg/m³)
Briquette diameter: 75 mm
Including 2 m press channel
Main motor power: 45 kW
Feed auger with geared motor: 2 x 2.2 kW
Compactor auger: 2 x 5.5 kW
Distributor auger: 2.2 kW
Hydraulic pump motor: 0.37 kW
Total connected load: 65 kW
Control panel with plain text display for operating states
Ncodpfx Ae E Dquofmsu
and load display for main drive and feed augers
PLC control: Siemens S7/300 with operating hours counter in the control cabinet
Machine has CE mark
Automatic start/stop function
Dimensions: 3,100 x 860 x 1,800 mm (L x W x H)
Weight: 4,500 kg
Options:
Silo for MAP series (only suitable for a MAP 1200 press)
- Storage silo above the machine -
Capacity approx. 6 m³, robust steel construction with agitator discharge and fill level sensor.
€19,700 net plus VAT.
-Temperature control unit for press tools
To maintain temperature for optimal briquette quality. Temperature controller for pump, cooling unit, fan, pressostat
Prewired – absolutely necessary for operation
Including corresponding control
€7,850 net
-Guillotine for cutting briquettes to length
Compressed air supply required on site
€6,940 net plus VAT.
-Transfer pipe / cooling section (nominal: 4 x 2 m)
Per 2 meters €990 net
Assembly / commissioning (nominal per press approx. 2–3 days on site)
Charged according to actual effort and time, invoiced separately. The following rates apply:
Service technician/mechatronics engineer per assembly and travel hour: €129.00
Overtime: 25% surcharge
Each Saturday/night hour: 50% surcharge
Each Sunday/public holiday hour: 100% surcharge
Daily allowance per technician: depending on country
Per car/van and distance kilometer: €0.98/km
Travel and accommodation will be invoiced on an actual cost basis or as a flat rate at the buyer’s expense.
Material testing with customer-provided material (by arrangement, up to max. 750 kg) – €1,970 net flat rate
----
Raw material requirements:
- Moisture content (atro) must be between a minimum of 6% and a maximum of 18%
- Maximum chip length: 20 mm
- Ambient temperature: heated room with at least +5°C
- Material must be free of metals and mineral contaminants. Damage to press tools and/or increased wear may otherwise occur.
Mali oglas
Neckartailfingen
511 km
Tovarna za drobljenje
mütekMGZ 630 H
Pokliči
Stanje: novo, Leto izdelave: 2026, Idealni stroj za drobljenje mehkega lesa.
.
Motor: 11/15 kW; 400 V - 50 Hz - 3 fazni,
Premer rotorja: 260 mm,
hidravlično vodeno potisno kolo
Sito po izbiri (12 - 40 mm)
Priključek za odsesavanje Ø 160 mm
Teža cca 1.100 kg
Mere (d x š x v) cca 1805 x 1118 x 1650 mm
Barva: modra / siva
Nodpfx Aewzarcsfmocu
Zahteve za surovino:
- Vsebnost vlage (atro) mora biti pod 30 %
- Kovine in mineralne nečistoče, kot so pesek, kamni itd., povzročajo povečano obrabo.
.
Z veseljem vam ponudimo brezplačen preizkus z vašim materialom. Vabimo vas k nam v Neckartailfingen. Prav tako je možno, da nam material pošljete prek špedicije in mi test dokumentiramo s fotografijami in videi.
Mali oglas
Neckartailfingen
511 km
Droblilna enota
mütekMGZ 1330
Pokliči
Stanje: rabljeno, Machine de broyage MGZ 1330, 37 kW
Heures de fonctionnement : 275
Inclus :
- 2ème rangée de couteaux
- Hydraulique rapide, pour un débit accru
- Préparation pour bande transporteuse
En option :
- Bande transporteuse avec séparateur automatique de métaux
Vos avantages :
+ Ouverture du caisson de coupe extrêmement grande : en haut 1300x1200mm
+ Rotor spécial adapté pour bois dur et bois tendre
+ Économique en énergie et puissant, avec 37 kW au démarrage
Données techniques :
Ouverture d’alimentation (en haut, mm) : 1.300 x 1.200
Volume de la trémie (m³) : 1,6 m³
Diamètre du rotor (mm) : 368
Ncodpjx Tfdhefx Afmeu
Vitesse du rotor (tr/min) : 65 - 125
Puissance requise (kW) : 37
Tamisage (mm) : selon accord
Outils : 37/70 couteaux
Diamètre de la buse d’aspiration (mm) : 200 mm
Dimensions (LxLxH) : 2430x2410x1735 mm
Poids (env. kg) : 3 500
---
Exigences pour la matière première :
- La teneur en humidité (atro) doit être inférieure à 20 %
- L’alimentation doit être exempte de métaux et d’impuretés minérales. Des dommages aux outils et/ou une usure accrue risque d’en découler.
Mali oglas
Nemčija
614 km
Dvižna ploščad
Büter HebetechnikRSW 250-12
Pokliči
Leto izdelave: 2016, stanje: rabljeno, Technical Details:
Wheelbase: 950 mm
Load capacity: 25,000 kg
Lifting height: 1,310 mm
Own weight: 2,100 kg
Dimensions (LxWxH): 1.7 x 2.0 x 0.75 m
Total power requirement: 11.2 kW
WHEELSET CHANGING SYSTEM - WHEELSET PIT
Application: Changing of wheelsets and drive axles for railway requirements (locomotives, freight cars, etc.)
2 speed levels forward/reverse
2 speed levels for lifting approx. 60 sec./lowering approx. 110 sec., operation via hand-held controller
Lateral shift left/right +/- 20 mm
Ncsdpox Ac R Uefx Afmou
Hoisting category 5
Emergency stop
Platform: L: 1,420 x W: 657 mm, usable stroke 1,050 mm
Operating pressure for hydraulics = 185 bar
Chassis speed = 2-stage minimum 18 mm/sec.
Axle spacing: 950 mm
Equipment:
10 m connection cable with 380 V
Mali oglas
Freising
351 km
Polnilnik in zapiralec pločevink
Malek Brautech
Pokliči
Stanje: rabljeno, Leto izdelave: 2022, Linearno postavljen punjač limenki sa rinserom, punilicom, postavljačem poklopaca i zatvaračem u jednom bloku. Punjenje pod protivpritiskom je kontrolisano volumetrijski. Promena formata za sve standardne veličine limenki.
Mašina (dodatno): sa 6 punionih stanica
Kapacitet: 2000 limenki/h za gazirana pića
Ncedpfoxbn Icex Afmsu
Apsorpcija kiseonika u punilici maks.: 25 ppb
Pritisak komprimovanog vazduha: IG 1/2", 6-10 bara
Dužina: 2774 mm
Širina: 1100 mm
Visina: 2000 mm
Formati: 12 oz i 16 oz limenke, tip poklopca 202 B64; moguća konverzija na druge formate
Upravljanje / Kontrola: Siemens Simatic S7
Oprema: 6 punionih stanica, 7-inčni touchscreen sa zakretnom rukom, puž za dovod, rezervoar za proizvod pod pritiskom (3 bara), servo-pogonač zatvarača, tunel za ispiranje i punjenje boca, motori SEW
Priključak proizvoda: DN25 do 3 bara, priključak CO2: DN20 do 3 bara, priključak za toplu vodu: DN20 2,5 do 3 bara.
Mali oglas
Nemčija
650 km
Spotting press
MILLUTENSILBV 24
Pokliči
Stanje: rabljeno, Leto izdelave: 1980, Pressure: 24 t
Table length: 1060 mm
Ncedpfx Aeufufbefmju
Table width: 650 mm
Minimum opening: 165 mm
Space requirement approx.: 1300 x 700 x 1500 mm
Mali oglas
Malsch
586 km
Oblikovalec zobnikov
PFAUTERPSA 300
Pokliči
Stanje: dober (rabljeno), Leto izdelave: 1998, Max. pitch circle diameter external gearing: 300 mm
Max. pitch circle diameter internal gearing: 300 mm
Max. outside diameter of workpiece (fixture): 450 mm
Module - max.: 6
Max. gear width: 100 mm
Max. helix angle (with tool Ø 125 mm): +/- 45°
Stroke rate - infinitely variable: 130 - 1300 strokes/min
Workpiece weight: 1000 kg
Minimum distance table surface - tool spindle: -55 / +300 mm
Maximum distance table surface - tool spindle: 200 mm
Maximal distance table surface - tool spindle: 350 mm
Manual column lateral displacement: +/- 25 mm
Manual swivel angle of the tool spindle: +/- 0.5°
Max. tool speed: 15 rpm
Max. workpiece speed: 27 rpm
Max. tool diameter: 7 in
Voltage: 400 V
Frequency: 50 Hz
Ncsdpfxjvu E Nuj Afmou
Max. mains current: 70 A
Total power requirement: 48 kW
Machine weight approx.: 11 t
Space requirements approx.: 4.27 x 3.11 x 2.87 m
Main spindle taper: SK 45
Table bore: 40 mm
Control: Siemens Sinumerik 840 C
Gear shaping machine: Gleason PFAUTER Mod. PSA 300
CNC modular gear cutting machine with shaping cutter for the machining of external and internal cylindrical gears, with straight or helical involute gearing as well as any other profile achievable via generating or form shaping processes. The machining cycle is controlled by a CNC unit, equipped with dedicated gear cutting software.
Application scope --> The PSA 300 is designed for manufacturing:
- Gears with straight external toothing
- Gears with straight internal toothing
- Gears with external helical gearing
- Gears with internal helical gearing
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Hilden
813 km
Stroj za brušenje vijaka
SAMPUTENSILIS 3000 GW
Pokliči
Stanje: rabljeno, Leto izdelave: 2012, Schleifdurchmesser 200 mm
Profiltiefe 30 mm
Werkstücklänge - max. 2790 mm
Schleiflänge 2310 mm
max. Steigung der Schnecke -/+ 50 °
Anzahl der max. Gänge 1-999
Werkstückgewicht max. 250 kg
z-Weg 3000 mm
x-Weg 185 mm
Schleifscheiben-Durchmesser max. 450-330 mm
Schleifscheibenstärke (mit Einsenkung) 20-70 mm
Rollendurchmesser 120 mm
Drehzahl der Schleifscheibenspindel 1500 - 6000 U/min
Drehzahl der Werkstückspindel 0 - 600 U/min
Geschwindigkeit Neigungsachse 0-4 1/min
Geschwindigkeit Abrichterspindel 1500-16000 1/min
Vorschubgeschwindigkeit Z-Achse 0-10000 mm/min
Vorschubgeschwindigkeit X-Achse 0-10000 mm/min
Gesamtleistungsbedarf 150 kVA
Steuerung Siemens Sinumerik 840D SL
Maschinengewicht ca. 30 t
Raumbedarf ca. 10,65 x 5,37 x 2,75 m
Austattung/Zubehör:
- Filteranlage: KNOLL VL1500/5000
Nsdpfeza Hqzsx Afmecu
- sehr viel Zubehör - Aufstellung folgt
- Dokumentation
Mali oglas
Hilden
813 km
Rezkalni stroj za stožčasta kolesa – ravni zobniki
GLEASON-PFAUTERNo. 104 CNC
Pokliči
Stanje: rabljeno, Stožerska razdalja min./maks. 0-108 mm
Nagibni kot min./maks. 5°/84°
Krmilnik GE Fanuc Series 0-GC
Delilni premer (razmerje 1:1): 152 mm
Delilni premer (razmerje 10:1): 216 mm
Premerna razdalja (najfina/groba): 1,3/8,5 Mod.
Maks. čelna širina zobnika: 35 mm
Območje hitrosti vretena rezila: 41-121 min⁻¹
Območje hitrosti delovnega vretena: 0-33,33 min⁻¹
Teža: 9025 kg
Potrebni prostor cca 2707 x 2720 x 2200 mm
Ncsdpfoyh Rmmex Afmeu
Oprema/dodatki:
- 18 kompletov rezil
- Transporter ostružkov
- Tehnična dokumentacija
Mali oglas
Zwevegem
1.001 km
Vakuumski tumbler, tip T4
LutetiaVacuümtumbler, Type T4
Pokliči
Stanje: rabljeno, obremenitev: maks. 50 do 55 % (± 1.800 kg)
popolnoma iz nerjavečega jekla
Ncodpezc E Tmsfx Afmsu
Lutetia upravljanje
brezstopenjska hitrost (frekvenčni pretvornik)
2 motorja (6,6 kW)
dimenzije (D x Š x V): ± 3.500 x 1.500 x 2.000 mm
višina nalaganja: ± 1.250 mm
teža 1.400 kg
vakuumska črpalka ni vključena
Mali oglas
Zwevegem
1.001 km
Vakuumski tumbler, tip T400
LutetiaVacuümtumbler, Type T400
Pokliči
Stanje: rabljeno, obremenitev: max. 2.800 kg (odvisno od izdelka)
popolnoma iz nerjavečega jekla
vakuumska črpalka ni vključena
z MC-krmiljenjem
primerno za hlajenje
nastavljiva hitrost
1 vodni filter
nagibni sistem za praznjenje
Njdpfszcwcgox Afmjcu
moč: 5,9 kW
dimenzije (D x Š x V): ± 3.490 x 1.820 x 2.250 mm
Olajšamo vam iskanje: "schoen ute/b20"
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.


















































































































































































