Schoen Ute/B20 nakup rabljenega (1.013)

Stanje: rabljeno, TEHNIČNI PODATKI - Premer obdelovanca: 100 [mm] - Nazivni modul * Obruševanje zobnikov: pribl. 3,0 [mm] * Obruševanje polžev: pribl. 5,0 [mm] - Največji pomik po osi: 320 [mm] - Usmerjanje notranje rezkalne glave: -45 / +115 [°] - Največji premer valjastega rezkalnika: 118 [mm] - Največja obdelana dolžina valjastega rezkalnika: 180 [mm] - Največji pomik rezkalnika (premik): 160 [mm] - Največja hitrost vretena držala obdelovanca: 3000 [obr/min] - Min/Max. razdalja med osmi: 10/100 [mm] - Moč motorja notranje rezkalne glave: 14 [kW] - Hitrost valjastega rezkalnika: 50–12.000 [obr/min] - Teža: 5000 [kg] OPREMA - Siemens 840D krmilnik - Rezervoar za hladilno sredstvo Hedpfx Ajx Ed A Rsfaop - Transporter za ostružke

Stanje: rabljeno, TEHNIČNI PODATKI - Maks. premer obdelovanca: 80 [mm] - Z-pomik: 220 [mm] - Maks. modul: 2,5 - Maks. hitrost vretena nosilca obdelovanca: 3000 [vrt/min] - Maks. dimenzije valjčne rezkalke (premer × dolžina): 118 × 120 [mm] - Hitrost vretena rezkalke: 200-5000 [vrt/min] - Preklopni hod: 140 [mm] Hedpfx Afsyuzggoaop - Kotni pomiki rezkalne glave: -45/+115 [stopinj] - Potreben prostor: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmiljenje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: rabljeno, TEHNIČNI PODATKI - Največji premer obdelovanca: 80 [mm] - Z-premik: 220 [mm] - Največji modul: 2,5 - Največja hitrost vretena nosilca obdelovanca: 3000 [obr/min] - Največje dimenzije valjčne rezkarice (premer × dolžina): 118 × 120 [mm] - Hitrost vretena rezkarja: 200–5000 [obr/min] - Premik za preklop: 140 [mm] - Kotni premiki rezkalne glave: -45/+115 [stopinj] Hedpfxoyuzgao Afaop - Potrebna površina: 2700/2180 [mm] - Višina stroja: 2310 [mm] - Teža stroja: 4800 [kg] DODATNA OPREMA - Krmilje: Siemens 840D PowerLine - Nakladalni manipulator

Stanje: zelo dobro (rabljeno), Clamping plate with T-slots Hedpfxjfm Tq Te Afajp diameter 485 mm bolt circle diameter 118 mm hole spacing 170 mm

Stanje: zelo dobro (rabljeno), Krmilna enota, regulator ogrevanja, upravljanje osmoze – krmilna omarica, regulator ogrevanja, naprava za regulacijo ogrevanja - Proizvajalec: Sauter, regulator ogrevanja equitherm 100 z dodatno opremo, neuporabljen, v originalni embalaži - Tip: EQJW 41 D 10 - Senzorji temperature: EGT 30 B 10 / EGT 31 B 10 - Količina: na voljo 2 regulatorja ogrevanja - Cena: na kos - Transportne mere: 210/210/V165 mm - Teža: 2 kg/kos Hedpfx Asx Hxcdofaop

Leto izdelave: 2011, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Clean-o-mat SP 120 Uporabni premer košare cca 1140 mm Priključne vrednosti: 230/400 V/24 A/50 Hz Uporabna višina cca 500 mm Motor črpalke: 4 kW Višina nakladanja cca 830 mm Ogrevalna moč: 9 kW Dovoljena obremenitev košare: 500 kg Pogon za vrtenje košare: 0,09 kW Volumen tekočine: 210 l Enostopenjsko izsesavanje pare: 0,45 kW Pretok črpalke: 280 l/min Skupna višina cca 1250 mm Hjdpfx Aeyth Uzsfaop

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, fiksni nosilci orodij Stroj: MORI SEIKI SL2000 Proizvajalec revolverja: SAUTER ---- 2x→ št. 444-119 Nosilec stružnih orodij 25 mm nosilec jekla Fiksni stružni nosilec orodja Cena: na zahtevo ----- 1x→ št. 444-201 Dvojni nosilec stružnih orodij za glavno vreteno in protivreteno z 1x pritisno letev za 25 mm jekla Fiksni stružni nosilec orodij Cena: na zahtevo ----- 1x→ št. 444-210 Nosilec vrtalne palice Cilindrični vpenjalni premer ø 32 mm drugi premer ø 32 mm; azadaj 57 mm Hodjynb E Njpfx Afajp Cena: na zahtevo ----- 1x→ št. 444-205 Nosilec za struženje 25 mm nosilec jekla Cena: na zahtevo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Premer kolesa - maks. 130 / 80 mm Širina kolesa 180 mm Modul - maks. 4 Modul - min. 0,5 Vretenaste hitrosti - brezstopenjsko 300 - 3000 obr/min Krmiljenje Siemens 840 D x-hod 200 mm Hjdpoxlug Hofx Afajp y-hod 170 mm z-hod 250 mm Rezkalna glava - nagibna + / - 45° Premer mize 168 mm Luknja v mizi 65 mm Največja vpenjalna dolžina 245 mm Območje vrtenja mize 0 - 1000 obr/min Skupna potreba po moči 51 kW Teža stroja pribl. 9,2 t Prostor za postavitev pribl. 4,5 x 4,0 x 3,2 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Premer kolesa - maks. 350 mm Hsdpfx Asy D T Upefaep Širina kolesa 230 mm Modul - maks. 8 Modul - min. 1 Krmiljenje Siemens 840 Teža stroja cca 10,5 t Potrebni prostor cca 4,5 x 2,5 x 3,0 m Naprava za nakladanje/razkladanje

Stanje: novo, Leto izdelave: 2026, * Production time approx. 4-5 months --- Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, continual development, and expertise + Several hundred machines in operation with satisfied customers + Excellent price-performance ratio The hydraulic briquetting presses of the MPP NEM series compress materials such as aluminum, copper, brass, bronze, graphite, and other non-ferrous metals into dimensionally stable cylindrical briquettes. The machines feature a robust construction that ensures consistent briquette quality during continuous operation. The pressing process is performed without the addition of binding agents, using only hydraulic pressing force. Depending on the material, the volume of the input material can be reduced by up to 90%. The standard silo has a capacity of approx. 0.5 m³. Silos with larger capacities or special containers designed for integration under existing extraction and filtration systems for complete disposal units are also available. Depending on customer requirements, individual MPP NEM units can be combined into a system. The press’s chip hopper can be loaded manually, via conveyor belt, with a dust extractor, or by a tipping container cart. For fully automated system operation, the use of a lift-and-tip device in combination with a shredder is recommended. The briquetting presses of the MPP NEM series are designed for the production of briquettes from homogeneous material. The length of a briquette is, depending on the model, 40 to 75 mm; the diameter is, depending on the type, 50, 65, or 70 mm. For emulsion recovery, the briquetting press can be equipped with a collection tray, allowing cooling, cutting, and lubricating fluids to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the storage hopper of the briquetting press. A stirrer is installed at the bottom of the hopper to prevent bridging and to feed the material into the pre-compaction chamber. In this chamber, a hydraulic slide pre-compacts the material and pushes it into the pressing block. The main press cylinder presses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder then moves upward, ejecting the stable briquette. Advantages of briquette production include: • Volume reduction of up to 90% • Emulsion recovery • Cost savings in storage and transport • Cost-effective disposal • Profitable sale -- Briquetting Press NEM 300 Throughput approx. up to 200 kg per hour (highly depending on material). - In the last test with aluminum granulate under 5 mm: approx. 186 kg per hour + recovered emulsion. - In the last test with aluminum chips under 18 mm: approx. 120 kg per hour + recovered emulsion. Technical specifications: Hodpfx Aschqxxofajp Motor: 7.5 kW (+ 0.55 kW on the cooler) 400 Volt / 50 Hz / 3-phase Front bushing: 125 mm Max. briquette stroke: 100 mm Optimal briquette stroke: 80 mm Pump: 80 liters Storage hopper approx. 0.5 m³ capacity (extendable)

Stanje: novo, Leto izdelave: 2026, Premer: 160 mm Za doplačilo je možno dobiti tudi v premerih: 180, 200, 250, 300 mm; dodatni premeri na zahtevo. Hjdochuvrspfx Afajp Zelo robustna industrijska izvedba. Idealno za ločevanje žebljev/kovinskih delov iz materialnih tokov. Na primer za uporabo po lesnem drobilniku. Vključno s 3 izjemno zmogljivimi magneti. * Po želji je mogoče vgraditi do največ 6 magnetov v element – doplačilo za vsak dodatni magnet + 49 € - Za doplačilo so na voljo tudi neodim magneti namesto feritnih. Vaše prednosti: + Izjemno velika revizijska vrata s tesnilom za lahko odstranjevanje žebljev + Stabilno hitro zapiranje + Izdelano v Nemčiji Revizijska vrata/odprtina: 35x18 cm Vgradna dolžina je lahko različna

Stanje: novo, Leto izdelave: 2026, Our best-selling briquetting press – the classic choice. + Proven, simple technology for extremely low failure rates + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Outstanding price-performance ratio Optional extras (available at additional cost): *Surcharge for fill level sensor, enabling automatic operation: + €995 net *Surcharge for large pre-compression chamber + €970 (Recommended for very light materials such as straw, increases machine width by 13 cm) Briquette diameter: 50 mm Front bushing: 50 mm Max. briquette stroke: 40 mm Optimal briquette stroke: 40 mm Throughput (material dependent): up to 60 kg/h* *Depending on bulk density *Based on a bulk density of 200 kg/m³ Hjdpfx Ajgl Nlmofaop Motor power: 5.5 kW 400 Volt / 50 Hz / 3-phase Length: 1,680 mm Width: 1,100 mm Height: 1,500 mm Weight: 680 kg Oil volume: 110 liters Silo diameter: 1,000 mm Silo capacity: approx. 0.7 m³ Pump output: 37 liters Hydraulic pre-compressor Press tongs cooling option: No Hydraulic oil cooling option: Yes Fill level monitoring option: Yes CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and max. 18% - Maximum chip length 15 mm - Installation temperature: Tempered room, at least +5°C - Customer must provide protection against hydraulic oil loss - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to pressing tools and/or increased wear may result

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special price: €29,970 net One machine is currently available for immediate delivery. The ideal solution for shredding bulky, lightweight aluminum chips or turnings. Not suitable for larger, solid aluminum parts. Included features: + Optimized cutter geometry + Customized pusher control + Load-dependent hydraulically controlled pusher (presses the chips against the cutting unit) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Knives: 40x40 mm, multiple rotatable Rotor diameter: 260 mm Control: Omron PLC Cutting unit opening: 600 x 800 mm Hopper volume: approx. 0.6 m³ Hydraulically operated pusher Screen perforation as desired (15 - 40 mm) Hjdpfegmh H Tjx Afajp Extraction port Ø 160 mm Weight: approx. 1,300 kg Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm The following options are available at an extra charge: - Raise shredder by 30 cm (preparation for conveyor belt): +€2,990 net - Angled conveyor belt (discharge height approx. 220 cm): +€9,770 net - Overband magnet: +€6,980 net - Conveyor belt and overband magnet control: +€2,750 net (Start and stop synchronized with the shredder) We are happy to offer a free test using your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send your material to us via a freight forwarder, and we will document the test with photos and videos.

Stanje: novo, Leto izdelave: 2026, Availability upon request Very robust machine with high pressing force - also suitable for producing marketable briquette quality *depending on material. This is made possible by the large-dimensioned press cylinder and the 70 mm briquette size. Our best-selling briquetting press series + Proven, simple technology, ensuring extremely low susceptibility to failure + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent value for money Optional demonstration cooling unit surcharge: + €4,980 net (can also be retrofitted later) * Cools the press clamp (important from 4 hours of operation) and the hydraulic oil * Cooling unit recommended for regular operation exceeding 4 hours continuously Commodity code: 84793010 Briquette diameter: 70 mm Front sleeve: 125 mm Max. briquetting stroke: 100 mm Optimal briquetting stroke: 80 mm Capacity (material-dependent): up to 150 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor output: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2,095 mm Width: 1,300 mm Hodpsd Nm Sijfx Afaep *with large chamber 1,600 mm Height: 1,700 mm Weight: 1,250 kg Oil volume: 220 liters Silo diameter: 1,200 mm Silo capacity: approx. 1 m³ Pump: 75 liters Hydraulic pre-compressor Press clamp cooling option: yes, with optional coolable press clamp Hydraulic oil cooling option: yes Cooling of press clamp and hydraulic oil possible with optional cooling unit Level monitoring option: yes Continuous strand briquette option: yes (material-dependent) Enlarged filling slider option: yes, with optional enlarged filling slider CE compliant Raw material requirements: - Moisture content (atro) must be between at least 6% and a maximum of 18% - Maximum chip length: 20 mm - Installation temperature: heated room with at least +5°C - Material feed must be free from metals and mineral contaminants such as sand, stones, etc. Damage to the pressing tools and/or increased wear may otherwise occur

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Hjdpfxev Rpxle Afaep Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: novo, Leto izdelave: 2026, Delivery time: Approx. 4-5 months Your advantages: + Extremely large cutting chamber opening: 1300 x 1200 mm + Special rotor suitable for both hard and soft wood + Energy efficient and powerful with 37 kW start-up output Technical specifications: Color: grey / blue Feed opening on top (mm): 1,300 x 1,200 Hopper volume (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 – 125 Power requirement (kW): 37 Screen perforation (mm): 10 – 40; selectable Hedpfogbkkrjx Afasp Tools: 37/70 knives Extraction port diameter (mm): 200 mm Dimensions: 2430 x 2410 x 1735 mm (L x W x H) Approx. weight (kg): 3,500 Options available at extra cost: - Second row of knives, for up to 30% higher throughput - High-speed hydraulics, for increased throughput - Conveyor belt discharge preparation - Conveyor belt - Overband magnet HAWK-EYE *To shred veneer or paper (materials thinner than 3 mm) we recommend a segmented floor. Special option available at extra cost. --- Slider extension option *available at extra cost Maximum pallet size up to 1200/1400 mm possible (with the slider extension option, the cutting chamber opening on the top is 1300 x 1700 mm; surcharge +14,975) *significantly longer production time required. *Larger machines available upon request. --- Raw material requirements: - Moisture content (oven-dry) must be below 20% - The feed material must be free of metals and mineral impurities. Otherwise, tool damage and/or increased wear may occur.

Stanje: novo, Leto izdelave: 2026, * Optional features available at extra cost, see below * Production time approx. +/- 6 months The hydraulic briquetting presses of the MPP NEM series compact materials such as aluminum, copper, brass, bronze, and other non-ferrous metals into dimensionally stable cylindrical briquettes. These machines are characterized by their robust construction, ensuring consistent briquette quality during continuous operation. The compaction process takes place without the addition of binding agents—solely via hydraulic pressing force. Depending on the material, the input material volume can be reduced by up to 90%. The standard silo holds approx. 0.5 m³, but larger silos or special containers for installation below an existing extraction and filter system as a complete disposal unit are also available. Depending on customer requirements, MPP NEM individual machines can be combined into a complete system. The chip hopper of the press can be loaded manually, via conveyor belt, via dust extractor, or with a tilting container trolley. For systems intended for fully automatic operation, the use of a lift-and-tilt device, in conjunction with a shredder, is recommended. The MPP NEM briquetting presses are designed for the production of briquettes from homogeneous material. The length of a briquette depends on the model and ranges from 40 to 80 mm, and the diameter varies by type (50, 65, or 70 mm). To recover emulsions, the briquetting press can be equipped with a drip tray, allowing coolants, cutting fluids, and lubricants to be collected and recovered. Non-ferrous metal chips up to approx. 20 mm in length are filled into the briquetting press's feed hopper. An agitator is built into the bottom of the hopper to prevent bridging and feed the material into the pre-compaction chamber. In this chamber, a hydraulic ram pre-compacts the material and pushes it into the press block. The main press cylinder then compresses the material against a vertical slide until the set pressing pressure is reached. The vertical cylinder subsequently lifts, and the finished, stable briquette is ejected. The more homogeneous the input material, the more uniform the briquette lengths. Advantages of briquette production include: - Volume reduction by up to 90% - Emulsion recovery Hedpogfm Ryefx Afaop - Cost savings on storage and transport - Economical disposal - Profitable resale Briquetting Press NEM 900: For briquetting aluminum chips Throughput capacity: up to 350 kg/h max (material-dependent; chip length less than 10 mm) Last test with aluminum chips < 18 mm: approx. 260 kg/h *More details available after a free test with your material. Briquette diameter: Ø 70 mm Optimal briquette length: 70 mm Technical data: Total connected load: approx. 31 kW Continuous operation: approx. 22 kW 400 Volt / 50 Hz / 3-phase Pump: 120 + 60 litres per minute Silo: 1 m³ Silo diameter: 1200 mm Including agitator Oil tank: 600 litres Dimensions (LxWxH): 2500 x 1700 x 1730 mm Weight: 2250 kg Hydraulic pre-compaction via ram Main press cylinder Vertical cylinder Prepared for connection to a cooling unit

Stanje: novo, Leto izdelave: 2026, obratovalne ure: 8 h, Availability upon agreement Very robust machine with high pressing force - Also suitable for producing a marketable briquette quality *depending on material. The large-dimensioned pressing cylinder and the 80 mm briquette diameter make this possible. Our bestselling briquetting press series + Proven, simple technology for extremely low susceptibility to faults + 25 years of experience, ongoing development, and expertise + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Surcharge for cooling unit + €4,995 net (can also be retrofitted later) * Cools the pressing tongs and hydraulic oil (recommended if the press is operated continuously for more than approx. 3.5 hours without pause) Briquette diameter: 80 mm Front bush: 125 mm Maximum briquette stroke: 100 mm Optimal briquette stroke: 80 mm Throughput (depending on material): up to 200 kg/h* *depending on bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 9.2 kW 400 Volt / 50 Hz / 3-phase Length: 2095 mm Width: 1300 mm Height: 1700 mm Hjdpfx Aoxfwdjfajp Weight: 1250 kg Oil volume: 220 liters Silo diameter: 1200 mm Silo capacity: approx. 1 cbm Pump: 75 liters Hydraulic pre-compressor Press jaw cooling option: yes, with special accessory coolable press jaw Hydraulic oil cooling option: yes Cooling of press jaw and hydraulic oil with cooling unit (special accessory) Fill level monitoring option: yes Continuous briquette option: yes (material dependent) Enlarged filling slider option: yes, with special accessory enlarged filling slider CE compliant Requirements for raw material: - The moisture content (atro) must be at least 6% and not exceed 18% - Maximum chip length 20 mm - Installation temperature: heated environment, at least +5°C - The feedstock must be free from metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear may occur as a result.

Stanje: novo, Leto izdelave: 2025, Ideal for shredding straw, polystyrene (EPS), leaves, hay, and bread. Throughput strongly depends on the screen and input material: - up to a maximum of 350 kg/h for straw with a 15 mm screen - up to 60 kg/h for EPS with a 15 mm screen Motor: 11 kW - 400 Volt (Other options available on request: 9.2 kW or 15 kW) Optional: *Surcharge for the next larger machine with an 18.5 kW motor and larger silo diameter: + €2,750 (net) Robust steel construction, hardened cutting blades, screen with replaceable inserts, available perforations: (10), 15, 22, 26, 30, 40, or 60 mm For electric drive, equipped with star-delta switch, overload protection, and 8 m ready-to-plug-in power cable, 150 mm discharge nozzle, suitable for plastic or grain pipes, blowing distance approx. 12 m, chassis with 2 running wheels (Ø 380 mm) and one swiveling support wheel (Ø 125 mm), all wheels with solid rubber tires, approximate dimensions: 1200 x 900 x 1270/1400 mm (LxWxH) weight approx. 240 kg Spare parts prices & options: Hodpfx Aszbizofajp 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Lid: €290 each (net) Polystyrene disc: €600 each (net)

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Demonstration machine with approx. 9 operating hours Another machine available immediately (ex works Neckartailfingen) *Options available at extra cost – see below Included: + Profile rotor for higher throughput performance We are happy to offer a free test using your material. For this, I invite you to visit us in Neckartailfingen. Alternatively, you can send your material to us via freight carrier and we will document the test with photos and videos. Motor: 18.5 kW; 400 V - 50 Hz - 3 ph Blades: 15 pieces, reversible multiple times, Optional double blade row + €995 net Rotor diameter: 260 mm Control system: Siemens S7-1200 PLC Cutting chamber opening 630 x 820 mm Hsdpfx Aeb Ny Eyjfaop Hopper volume approx. 0.6 cbm Hydraulically operated pusher Screen perforation of your choice (10–40 mm) Extraction port Ø 160 mm Weight approx. 1,300 kg Dimensions (LxWxH) approx. 1737 x 1167 x 1650 mm Moisture content: < 30% dry basis. Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star/delta start - High-speed hydraulics - Automatic shut-off when rotor idling - Rotor speed 70–90 rpm for high throughput - Timed control to avoid idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-damping machine feet - CE compliant Optional shredder accessories for extra charge: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,080 net - Eco Rings: + €1,980 net (recommended for more than 20% hardwood) - Double blade row + €995 net - Special scraper + €990 net (recommended for shredding veneer or paper, or materials less than 3 mm in thickness) - Angled conveyor belt + €8,770 net Angle: adjustable 0–60 degrees Discharge height: approx. 2,000 mm - Automatic overbelt magnet + €5,980 net - Alternatively, fixed magnet block over conveyor belt for manual cleaning + €990 net (for low metal content) - Conveyor and overbelt magnet control + €2,750 net (Start and stop synchronised with shredder) Alternatively, manual start and stop of belts + €595 net Raw material requirements: - The moisture content (dry basis) must be below 30% - Installation temperature: heated room with at least +5°C - Metals and mineral contaminants such as sand, stones, etc., cause increased wear

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Machine available at a special price Machine available immediately (ex works Neckartailfingen) Demonstration unit Your benefits: + Very robust, simple technology + Excellent price/performance ratio + Suitable for continuous operation + Proven, well-functioning and established machine over many years Includes control cabinet with timer operation The press is manually started and runs until the set time on the timer (e.g., 4 hours) has elapsed. The press then switches off automatically. Technical data: Briquette dimensions: 30/35 mm (square) Briquette length: 5–35 mm (depending on material) Throughput capacity: up to max. 25 kg/h (depending on material) Hodofci D Aopfx Afasp Machine dimensions approx.: 137 x 75 x 148 cm (L x W x H) Machine weight: approx. 250 kg Silo capacity: approx. 250 litres Motor: 2.2 kW, 400 V – 50 Hz Noise emission: 62 dB Raw material requirements: • Wood shavings and dust less than 15 mm in length • Moisture content less than 15% ATRO • Sand, stones, metals, and minerals increase wear --- Options at extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after the set time X. -Fill level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Now also available in 230 Volt, Motor then 3 kW instead of 2.2 kW, Surcharge + €690 net (delivery time approx. 8 weeks) ---

Leto izdelave: 2026, stanje: novo, *Only the neodymium overband magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have extremely high holding force and cannot be compared to ferrite magnets. Extremely high separation efficiency, depending on the material height and input material. Probably the most compact overband magnet on the market. Competitors often use the less powerful ferrite magnets to save costs. Approximate dimensions: Hedpodubpusfx Afasp Length: 104 cm Width: 22 cm Height: 28 cm (at the motor) *Without control system Surcharge for simple manual start/stop control: + €495 A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600 x 68 x 36.5 mm * Over a length of 600 mm, nails are attracted and discharged sideways once outside the magnetic zone. This overband magnet should be installed approx. 7–10 cm above the material flow. *Mounting/suspension to be provided by the customer *depending on the maximum length of the metal pieces. Ideal for separating nails from wood chips. Optionally used in a single-shaft shredder with extraction. Requirements: * Your belt width or effective inner width (of the existing conveyor belt) should ideally be less than 55 cm *Suitable for separating nails from material flows less than 12 mm high, as well as chip lengths less than 25 mm. ----- Optional at extra cost: Cross and incline conveyor demo units from €8,770 net

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Special-purpose machine for plastic size reduction Base machine from €24,990 net Ideally suited for shredding: - Paper, cardboard, pipes, profiles, crates, canisters, buckets, cans, wood pallet offcuts, etc. - Medium-hard thermoplastics such as PVC, PP, PE, PS, PU, PET Included: - Special rotor with embedded knives (reduced torque loading) - Minimal cutting gap between rotor and counter-knife Motor: 18.5 kW; 400 V - 50 Hz - 3-phase Control: PLC Cutting chamber opening (top): 600 x 800 mm Input material should be max. approx. 500 x 500 mm (height less critical) Hydraulically operated pusher Screen perforation as desired (25–40 mm) For plastics, coarser screens are recommended (30–40 mm) *For finer granulation, a two-stage shredding system with downstream MVZ granulator (screens 5–15 mm) is recommended Hjdpfx Asd H R Sxjfasp Extraction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (L x W x H) approx. 1737 x 1167 x 1650 mm Additional options (at extra charge): - Raise shredder by approx. 25 cm (for conveyor belt discharge preparation) + €1,980 net - Inclined conveyor (discharge height approx. 220 cm) + €8,770 net - Overband magnet + €5,980 net - Conveyor and overband magnet control + €2,750 net (start/stop synchronized with shredder) - Alternatively, manual start/stop on the conveyor belt + €595 net Raw material requirements: - Moisture content (atro) must be below 25% - Metals and mineral contamination such as sand, stones, etc. result in increased wear. We are happy to offer a free test with your material at our site in Neckartailfingen. Alternatively, you can ship your material to us and we will document the testing with pictures and videos. --- *Only for brittle plastics with medium hardness. *Not suitable for elastic, extremely hard, or heavy plastics—this would negatively impact the system's durability. --- Optionally, larger machines are available: Base machine: Shredder MGZ 830 K-S – 18.5 kW Cutting chamber opening (top): 800 x 1,000 mm Input material should be max. approx. 720 x 700 mm (height less critical) From €39,995 net *Options upon request Base machine: Shredder MGZ 1030 K-S – 22 kW Cutting chamber opening (top): 1,000 x 1,000 mm Input material should be max. approx. 900 x 700 mm (height less critical) From €49,975 net *Options upon request Base machine: Shredder MGZ 1330 K-S – 37 kW Cutting chamber opening (top): 1,300 x 1,200 mm Input material should be max. approx. 1,200 x 700 mm (height less critical) From €79,975 net *Options upon request

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade projection, suitable for hard and soft materials + 22 kW motor + Effective square cutters/blades *For pallets: up to a maximum of 10 pallets per hour *Depending on screen and material. Considerably higher throughput with smaller residual wood. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Hsdpox Af Rdsfx Afaop Dimensions: 2000x1800x1645 mm Sample image above: colour of the machine may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown when rotor is idling - 70-90 rpm for high throughput performance - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-dampening machine feet - CE compliant The following options are available at an extra charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged hopper extension 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral impurities. Damage to the tools and/or increased wear may result.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Special price for our demonstration machine Another unit available immediately (ex works Neckartailfingen) Approx. 8 operating hours. Suitable for shredding all types of residual wood and pallet offcuts. Pallets must be pre-cut with a jigsaw or chainsaw so that they fit upright into the hopper—see image 2. Ideally, dimensions of approx. 40x20x20 cm allow the wood to lie flat on the ram base, which is the most efficient way for the machine to process it. A hydraulically driven ram at the bottom of the shredder pushes the wood against the rotor, with the pressure adjusted according to load. Material is shredded until it passes through the screen basket. Throughput up to 200 kg per hour (*depending on screen size and material preparation). *Discharge conveyor and overband magnet available at additional cost. + Powerful 18.5 kW motor + Concave blades + Heavy-duty large gearbox + Special load-dependent ram control system Hedjdwktkjpfx Afajp Commodity code: 84659600 Motor: 18.5 kW; 400 V - 50 Hz - 3 phase Blades: 15 pieces, multiple-use (reversible) Option: Double blade row + €995 net Rotor diameter: 260 mm Control: Siemens S7-1200 PLC Cutting chamber opening: 630 x 820 mm Fill volume: approx. 0.6 m³ Hydraulically actuated ram Screen perforation as requested (10–30mm) Extraction outlet Ø 160 mm Weight: approx. 1,300 kg (depending on configuration) Dimensions (LxWxH): approx. 1737 x 1167 x 1650 mm Moisture content: < 30% oven dry Standard equipment includes: - V-rotor for maximum throughput - Control cabinet with Siemens PLC - Automatic star-delta starter - High-speed hydraulics - Automatic shut-off in case of rotor idle - 70–90 rpm for high throughput - Cycle control to avoid idle times - Performance-boosting step control of the hydraulic ram - Pertinax guides for hydraulic ram - Vibration-damping machine feet - CE compliant - MADE IN GERMANY Shredder options: - Raise shredder by 30 cm (preparation for conveyor) + €2,080 net - Angled conveyor belt + €8,770 net Horizontal part: 1200 mm Inclined part: 2500 mm Adjustable angle: 0–60 degrees Discharge height: approx. 2000 mm (+/- 100 mm) - Overband magnet + €5,980 net - Control for conveyor and overband magnet + €2,750 net (Start/stop synchronized with shredder) - Extended hopper + €940 net - Eco rings: + €1,980 net (recommended for more than 15% hardwood content) - Special scraper + €990 net (recommended for veneer or paper) - Double blade row + €995 net Raw material requirements: - Moisture content (oven dry) must be below 30% - Metal or mineral contaminants such as sand, stones, etc., increase wear.