Zens Widerstandsschweißtechnik Gmbh & Co Ns009-250Mf-23Kn nakup rabljenega (74.101)

Stanje: novo, Leto izdelave: 2025, Features: - Overband neodymium magnetic separator - HP - Dust suppression Todpfew Elbdjx Aiqec - Belt speed control - Self-propelled drive for semi-trailer

Stanje: novo, Leto izdelave: 2025, Extraction floor, waffle floor for mineral blasting media, approx. 7000x4200mm, without grating cover, with suction nozzle and collection boxes. For questions regarding technical specifications, etc., please contact us in writing or by telephone. Tjdpjdz Ayvjfx Aiqsc The machines are based on production at the Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known contacts.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical Specifications: Operating Voltage: 400V AC Main Fuse: 50A Frequency: 50Hz Electrical Connected Load: 19.1kW Control Voltage: 24V DC Air Pressure: 6 bar Production Capacity: 20 x 2m modules/h Degree of Automation: Fully automatic Installation Dimensions: 12.5 x 5.2 x 4m (width x height x depth) Stations: Decoiler: This station holds the coil and unwinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400 Cosmetic Tape Applicator: Tsdpfx Aiexzug Soqjc Applies a cosmetic tape to the rear module edge of the product part using an applicator. Manufacturer: Printum Laser Cell: Creates contact openings by laser at the rear module edge of the product part and checks correct opening of the contacts using pneumatic Ignun contact pins. Manufacturer: ACSYS Lasertechnik GmbH CO² Laser INLINER II 40W CO2 Inspection Station: Empty cell for test procedures with sample materials. Transfer Tape Applicator Cell: Applies a transfer tape to the rear module edge of the product part using an applicator. Contact Ribbon Applicator Cell: Inserts preforms (solder pads) into the opened contact openings and then applies a contact ribbon to the rear module edge of the product part using an applicator. Soldering Station: Establishes the electrical contacts by soldering the preforms (solder pads) to the contact ribbon. Manufacturer: ATN Automatisierungstechnik Niemeier GmbH Flashing Station: Tests functionality of the product part via flashing and simultaneous contacting by pneumatic Ignun contact pins. Manufacturer: WAVELABS Solar Metrology Systems GmbH Type: WLAAA0039 Designation: Module Flasher Empty Cell: Currently no processing of the product part. Recoiler: This station holds the coil and rewinds the product part. Manufacturer: Robust Habicht & Heuser GmbH & Co. KG Type: URM-1400

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ASSEMBLY The compact and mobile bending machine enables precise and repeatable bending up to an outer diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox ensure a robust drive. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle can be set quickly and easily via a user-friendly, menu-driven touchscreen interface that ensures even more intuitive operation. For more complex bending tasks, 100 bending programs can be stored, each with an angle sequence of up to 8 bends per geometry. The multifunction control allows for variable adjustment of the bending speed for forward and reverse operation, and features a parametrizable overbending function to compensate for material spring-back. By using four material characteristic curves, the material is automatically overbent to the required bending angle, ensuring an accurate bending result. The "stationary pipe, rotating tool" principle ensures a minimal footprint during bending. For thin-walled pipes, sliding shoes are used to achieve wrinkle-free bends and to bend curves with minimal deformation from materials such as stainless steel and copper tubing. With the PB20 profile bending attachment, flat, square and round bars can be bent effortlessly. The KBV small radius attachment enables extremely small bending radii. POSSIBLE APPLICATIONS: • Plant construction • Hydraulic tubing • Meander bending • Prototype construction • Sanitary and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V • Minimum/maximum bending radius: 36 mm/280 mm • Optional large bending radii up to 500 mm • Multifunction machine controller, bending angle setting (0.1° precision) • Maximum bending angle 240° • 40 mm hexagonal shaft for quick tool change • Safety foot switch with emergency stop • Weight 110 kg OPTIONAL ACCESSORIES: Todpfxsng Ax Se Aiqjc • PB20 profile bender – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • RB43 roller bender – The RB43 is mounted on the hexagonal shaft of the bending axis. By switching to continuous bending, the bending system functions as a drive unit. • KBV small radius attachment • Special tools according to specification OUR LOCAL SERVICE FOR YOU: • Welcome to conduct test production in our in-house demo room • On-site consultation meeting • Advice and processing for leasing/financing purchases • Trade-in of your current machine • Service contracts, maintenance at your site

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, obratovalne ure: 15 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2002-045, skupna širina: 2.900 mm, skupna dolžina: 3.300 mm, natančnost ponavljanja: 0,2 mm, največja višina reza: 50 mm, priključek za stisnjen zrak: 6 letvica, Rabljeni stroj CNC rezalnik/plotter Rezalna površina v X in Y: 2.500 x 2.100 mm Multifunkcijski CAM sistem za razrez v CNC rezalni tehnologiji za 2D razrez usnja, tkanin, tehničnih tekstilov, pene in drugih ploščatih, polfleksibilnih ali togih, nemetalskih materialov. Oprema rabljenega stroja: • 1 rezalni most in 1 večnamenska glava za orodja Stroj se prodaja s CCD kamero za prepoznavanje registracijskih oznak • Večnamenska glava za orodja z možnostjo namestitve 3 izmenljivih orodij • Zmogljiv vakuumski ventilator za fiksiranje materiala • Standardno opremljen s sivim transportnim trakom (conveyor) Možna menjava za zelenomodri transportni trak (omogoča visok kontrast za temne materiale) Todpfx Aijfnlkweqjc Dodatna orodja (na zahtevo): • EOT električni oscilirajoči rezalnik • POT pnevmatski oscilirajoči rezalnik • PRT pogonski krožni nož • UCT univerzalni vlečni nož • KCT "kiss-cut" orodje • CTT orodje za žlebljenje • V-Cut kotni rezalnik • Sistem za prepoznavanje registracijskih oznak • Kamerna registracija • Orodje za štancanje (zareze ali luknje) • Rezkalnik z odsesovalno napravo Enostavna uporaba: • Enostavna menjava rezalnih orodij "PLUG & CUT" • Intuitiven uporabniški vmesnik • Hitra menjava rezil • Aktivacija vakuumskih con z enim klikom Hitro povračilo investicije: • Nizki stroški ob visoki dodani vrednosti • Najboljša izraba materiala z uporabo "nest expert" programskih modulov (ni v paketu) • Visoka hitrost • Konstantna natančnost Tehnični podatki: • Kratek čas rezanja zaradi visoke pozicijske hitrosti do 90 m/min • Ponovljivost +/- 0,25 mm • Rezanje eno- ali večslojnih materialov • Primeren za obdelavo plošč in rol (možnost razširitve z ustreznim odvijalcem) • Hitro povračilo investicije (Slika izdelka je simbolična) Stroj je CE certificiran.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 5.000 mm, notranja dolžina: 15.000 mm, notranja višina: 5.000 mm, filtrirna površina: 352 m², volumenski pretok: 22 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast house *up to 5 years warranty* for all blasting media, constructed from a steel frame/insulated panels, with filtration system, recirculating air system, abrasive recycling, 200l pressure blasting pot with automatic refilling, blast hose with dead-man control, breathing air system, LED lighting, wall cladding with 70 shore 4mm fabric-reinforced rubber, sweeping pit with bucket elevator. Abrasive return via sweeping pit with bucket elevator, optionally upgradable to cross screw conveyor with metering hood spanning the full width as a sweeping pit or as a complete flat conveyor floor. Workpiece transport upgradeable: blast trolley with rail track, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradeable with appropriate magnetic drawer or electrically driven magnetic drum separator. Todpfx Aiou Hy Tpsqsc For blasting with two different blasting media (ferrous and mineral), upgradeable with magnetic drum separator, final demagnetization stage, and second air sifter for media separation and cleaning. Safety features: emergency lighting with battery backup, emergency stop switches inside the cabin and outside, inspection window to blast chamber, gate/door end switches, dead-man control, pressure vessel quick venting. Warranty up to 5 years on selected components. 50 years of experience and more than 3,000 systems built in blast room engineering.

Leto izdelave: 2021, stanje: novo, Aluminium flat belt conveyor without substructure Tjdshfwcbjpfx Aiqsc Conveyor length: 4000 mm Drive roller: knurled Return roller: crown-faced, turned Our core competency lies in delivering exactly what the customer truly needs. We work in close cooperation with our customers to develop customized, application-specific solutions and supply corresponding systems manufactured in-house. Please feel free to contact us by phone to find the right solution for your application. PVC conveyor belt Conveyor belt type EM 15/2 0+17 PVC white, FDA compliant according to EU10/2011 Belt width: 500 mm (external) Wave edge welded on both sides, 40 mm high T-30 cleats – 400 mm pitch * Antistatic due to conductive threads in the running side fabric Endless welded with stepped finger splice Food-grade certificate included V2A stainless steel support plate, full-surfaced Drive: Motor approx. 1.1 kW * Optionally controllable via frequency inverter Connection: 220/400 V

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 1018, THE POWERFUL BENDING MACHINE FOR EXTREME USE: The compact bending machine enables precise and repeatable bending of pipes up to an external diameter of 100 mm, both stationary and directly at the installation site. Transport is easy using a pallet truck or the optional rollers. A robust three-phase motor and a precision gearbox provide high-performance drive power. The machine impresses with its compact and slim design and a very open bending area. Precise position sensing directly on the bending axis ensures optimal bending accuracy. The bending angle is quickly and easily set via a convenient, menu-guided user interface in 14 languages with touchscreen control, guaranteeing highly intuitive operation. For complex bending tasks, up to 100 bending programs can be stored, each featuring a sequence of up to 8 bends per geometry. Thanks to the multifunctional control system, both forward and return bending speeds can be variably set, and an adjustable overbend function compensates for the material’s springback. With the help of four material characteristic curves, the machine automatically overbends the material to the required angle, delivering precise results. The “stationary tube, rotating tool” principle minimizes the required workspace. For thin-walled tubes, sliding shoes are used to ensure wrinkle-free bends and to achieve minimal deformation—ideal for stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent without issue. Using the small-radius bending device (KBV), extremely small bending radii are possible. POTENTIAL APPLICATIONS: Tedjndk N Ajpfx Aiqsc • Plant construction • Hydraulic piping • Serpentine bending • Prototyping • Sanitary and heating installation • Shipbuilding TECHNICAL DATA 10000: Bending capacity: up to 100 x 5 mm, 55 mm solid material Three-phase 400 V • Bending radius up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1°) • Maximum bending angle 240° • Safety foot switch with emergency stop • Weight: 600 kg OPTIONAL ACCESSORIES: • Adapter system for tools from the 3000/6000 series, with bending radius from 45 mm, incl. 40 mm hex shaft • Profile bender PB20 – for bending flat and square bars up to max. 100 x 10 mm, round bars up to max. 20 mm • Small-radius bending device KBV • Special tools according to customer specifications • Software customization for special tasks OUR SERVICES: • Welcome to carry out test production in our in-house demo room • Consultation and information meeting at your site • Consultation and processing of leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, maintenance at your site

Leto izdelave: 1992, stanje: rabljeno, Plate heat exchanger for milk processing Tjdpfx Aijh Eulgoqoc

Stanje: novo, Leto izdelave: 2026, Pressure blasting cabinet, 4-axis controlled, for cleaning moulds, steel rings, die casting moulds, tyre moulds, press tools, etc. The travel path of the blasting nozzles is freely programmable. Includes 2 automatic nozzles and 1 manual blasting nozzle for post-cleaning of parts. Fitted with a Hardox turntable and screw conveyor for durable operation of the blasting system. For any technical questions, please contact us in writing or by phone. Tjdpfxodrtans Aiqjc The machines are manufactured at our Grossenlueder site since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with our long-standing, well-known representatives.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, pritisk: 6 letvica, trajanje garancije: 60 meseci, notranja širina: 4.000 mm, notranja dolžina: 6.000 mm, notranja višina: 3.000 mm, filtrirna površina: 99 m², volumenski pretok: 7 m³/h, Oprema: dokumentacija / priročnik, osvetlitev, Blast room for all types of abrasive media, constructed from steel with insulated panels, including filtration system, recirculating air system, abrasive media preparation, 200L automatic refill pressure blast pot, blast hose with deadman control, breathing air system, LED lighting, wall lining made of 70 Shore 4mm reinforced rubber sheet, sweep pit with bucket elevator. Abrasive media recovery via sweep pit with bucket elevator, upgradable to cross screw conveyor with dosing hood across the full width as a sweep pit or as a complete flat conveyor floor. Workpiece transport is retrofittable: blast trolley with rail bed, crane system, roof crane opening, etc. For glass bead blasting of stainless steel, upgradable with a suitable magnetic drawer or electrically driven magnetic drum separator. For blasting with two different types of abrasive media (ferritic and mineral), upgradable with magnetic drum separator, final demagnetization stage, and a second air classifier for separation and cleaning of the abrasive media. Todpfx Aou A A Tkoiqsc Safety equipment: Emergency lighting with battery backup, emergency stop switches inside the cabin and externally, viewing window into the blast chamber, gate/door limit switches, deadman control, pressure vessel quick venting. Warranty of up to 5 years on various components. 50 years of experience and more than 3,000 systems installed in blast plant construction.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 94447285, Leto izdelave: 2023, dvižna višina: 4.000 mm, dolžina verige: 4.000 mm, nosilnost: 500 kg, hitrost dviga: 75 mm/s, fina hitrost dviga: 18 mm/s, moč: 0,49 kW (0,67 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: Klimatska naprava, Naprodaj je praktično nov in takoj uporaben električni verižni dvigalo Demag, skupaj z ustreznim aluminijastim tirnim profilom (3,8 m), tirnim vozičkom in profesionalnim brezžičnim daljinskim upravljalnikom Demag. Naprava je bila izdelana v letu 2023 (06/2023) in je v odličnem, dobro vzdrževanem stanju. Tedozxg T Eopfx Aiqoc Tehnični podatki (verižno dvigalo): Model: Demag DC-COM 5-500 (1/1 H4 V4,5/1,1) Leto izdelave: 06/2023 Nosilnost (SWL): 500 kg (0,5 t) Višina dviga / dolžina verige: 4,0 m (4000 mm) Hitrosti dviga: 4,5 m/min (glavni hod) / 1,1 m/min (fino dvigovanje) Moč motorja: 0,49 kW / 0,10 kW Napetost: 3 ~ 380–415 V / 50 Hz Stopnja zaščite: IP 55 Lastnosti opreme in obseg dobave: Električno verižno dvigalo Demag z verigo in kavljem za obremenitev Aluminijasta tirnica (dolžina: 3,8 m), vključno s tirnim vozičkom Brezžični daljinski upravljalnik Demag (ročni oddajnik) za natančno in brezžično upravljanje Vključno s pripadajočo polnilno enoto/napajalnikom in priključnim kablom Idealno primerno za delavnice, skladišča ali montažne delovna mesta, kjer so potrebni natančno in varno dvigovanje. Ogled je možen po predhodnem dogovoru.

Stanje: novo, Pretokovni parni generator z električno močjo: 16,5 kW Maksimalna količina pare: 25 kg/h Maksimalni parni tlak: 2,5 bara Neomejeno paro, takoj pripravljen za uporabo Napetost/volt: 400 Tedpfxozzyuzo Aiqjc Številka carinske tarife: 84022000

Stanje: novo, Leto izdelave: 2025, PROFILE BENDING ATTACHMENT PB20 The ideal complement for tube bending on models 3000 and 6000 is the PB20 profile bending attachment. The device can be quickly and easily mounted onto the bending shaft without the need for tools. The workpiece is clamped onto the rotary table using the clamping fixture and pulled around the bending tool. With this system, the lengths of the bent legs can be measured precisely using a length stop and can be bent with high repeatability. Tedpsnh R Ekofx Aiqoc TECHNICAL DATA: • Bending capacity, steel 37: 100 x 10 mm, Ø 20 mm • Numerous standard tools available • Special tools possible • Sharp-edge tools with bending radius R2 or 5 mm • Round tools R 10 to 25 mm for bends up to max. 260° (optional) OUR SERVICE: • Welcome to test production at our in-house demo room • Consultation and information meeting at your site • Leasing/financing purchase consultation and processing via JUTEC • Trade-in of your existing machine • Service contracts and on-site maintenance

Stanje: novo, Leto izdelave: 2025, THE PRACTICAL HAND TUBE BENDER: The compact, mobile design allows for precise and consistently repeatable bending operations in a bench vice. Operation is performed via a screw-in handle. A lockable setting ring ensures consistent, repeatable bending angles. The easily exchangeable plug-in tool system makes tool changes straightforward. The 'stationary tube and rotating tool' principle enables bending with minimal space requirements. For thin-walled tubes, slide shoes are used for crease-free bending, enabling the production of bends with minimal deformation from materials such as stainless steel and copper tubes. The optional hexagonal drive version allows, in addition to vice operation, the use of the drive force from the 3000 and 6000 bending systems. The KBV can simply be mounted onto the machine’s bending shaft for this purpose. POSSIBLE APPLICATIONS: • Hydraulic piping installation • Prototype fabrication • Plumbing and heating installation TECHNICAL DATA: • Bending capacity: Ø 6 to 18 mm • Manual bend angle limitation Tsdeng Amkepfx Aiqsc • Maximum bending angle: 180º OPTIONAL ACCESSORIES: • KBV with hexagonal drive for bending on models 3000 or 6000 • Machine case • Length stop OUR LOCAL SERVICE FOR YOU: • Welcome to test production at our on-site demonstration room • Consultation and information meeting at your facility • Consultation and processing of lease/financing purchase through JUTEC • Trade in of your current machine • Service contracts and on-site maintenance

Stanje: novo, Protokovni dušilec z močjo 13,2 kW. Napetost/tok: 400 Maksimalni tlak pare: 2,5 bar Maksimalna količina pare na uro: 20 kg/h Tjdpfszzy Uuox Aiqsc

Stanje: rabljeno, Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1605269/1, skupna širina: 630 mm, skupna višina: 1.115 mm, skupna dolžina: 1.010 mm, delovna širina: 460 mm, vhodna napetost: 400 V, vrsta vhodnega toka: Klimatska naprava, skupna masa: 200 kg, moč: 0,37 kW (0,50 KM), premer valja: 100 mm, prehodna višina: 80 mm, hitrost pomika os X: 35 m/min, vrsta nastavitve višine: mehanski, kapaciteta rezervoarja: 2 l, širina valja: 450 mm, vhodna frekvenca: 50 Hz, višina obdelovanca (maks.): 80 mm, Oprema: dvostranski, Na prodaj je dobro vzdrževan stroj za nanašanje lepila in valjčno obdelavo proizvajalca Axel Wirth Maschinen GmbH, tip LW 100/450. Stroj je izdelan leta 2021, ima razmeroma malo delovnih ur in je v tehnično brezhibnem in dobro vzdrževanem stanju. Posebna prednost je regulirana delovna hitrost oziroma hitrost podajanja (6–35 m/min). To omogoča prilagodljivo uporabo stroja za različne obdelovance, materiale in medije za nanašanje. Stroj je nameščen na stabilni, mobilni podkonstrukciji s kolesi, ki se lahko zaklenejo. Zaradi tega ga je mogoče brez težav premikati po proizvodnji in varno umestiti na želeni delovni lokaciji. Na voljo sta skupaj dva stroja iste konstrukcije. Navedena cena velja za en stroj. Če kupite oba stroja, je možna ugodna paketna cena. LW 100/450 je primeren za enakomerno nanašanje tekočih in pastoznih medijev na ravne ali strukturirane obdelovance, na primer: - Lepilo in lepila - Olje in vosek - Lazura in temeljni premaz - Barve in disperzije - Smole in podobni mediji za nanašanje Med drugim je mogoče obdelovati les, masivni les, parket, iverne plošče, pluto, karton, kovino, kamen, gumo in izolacijske materiale. Količino nanašanega materiala je mogoče prilagoditi s stranskimi nastavitvenimi napravami. Valje in posode za lepilo je mogoče odstraniti z nekaj preprostimi koraki, kar omogoča udobno čiščenje stroja. Tedpfszr H Aasx Aiqsc Tehnični podatki in oprema: Proizvajalec: Axel Wirth Maschinen GmbH Tip: LW 100/450 Leto izdelave: 2021 Nazivna širina: 450 mm Delovna širina: približno 460 mm Višina prehoda: približno 80 mm Premer valjev za nanašanje: 100 mm Prostornina na posodo za lepilo: približno 2,3 litra Moč pogona: 0,37 kW Regulirana delovna hitrost oziroma hitrost podajanja Valji za nanašanje na zgornji in spodnji strani Ločena električna omarica Glavno stikalo in izklop v sili Mobilna podkonstrukcija s kolesi, ki se lahko zaklenejo CE oznaka Stanje: rabljeno, dobro vzdrževano in tehnično brezhibno Delovne ure: razmeroma malo Ogled in preizkus stroja sta možna po predhodnem dogovoru. Prevzem na lokaciji Leun. Po dogovoru lahko uredimo tudi pošiljanje s špediterjem. Če imate kakršna koli vprašanja ali ste zainteresirani, nam pišite. Z veseljem vam bomo posredovali dodatne informacije in fotografije. Cena: 5.900 € (samo za en stroj, brez DDV, DDV je možno izkazati) Paketna cena za oba stroja: na zahtevo Vse informacije so podane po najboljših močeh. Prodaja poteka v skladu z veljavnimi pogoji za rabljene stroje za prodajalca.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, številka stroja/vozila: 1018, vrsta upravljanja: Krmiljeno s PLC krmilnikom, stopnja avtomatizacije: ročni, vrsta aktuacije: električni, Premer cevi (maks.): 50 mm, Dolžina cevi (maks.): 6.000 mm, Debelina stene cevi (maks.): 3 mm, Kot upogiba (maks.): 195 °, radij upogibanja (maks.): 250 mm, trajanje garancije: 24 meseci, Oprema: CE označba, hitroizmenjevalna naprava, nožno daljinsko upravljanje, nujno zaustavitev, THE MANDREL BENDER WITH MANUAL CLAMPING This mandrel bending machine with manual eccentric quick-release clamping for tube fixation enables efficient bending operations. The compact drive unit with detachable mandrel support offers advantages during on-site installation. Direct position detection on the bending axis ensures optimum bending precision. The bending angle can be set quickly and easily via a convenient touchscreen controller with a user-friendly, menu-driven interface. The advanced control system allows for two speed settings as well as a configurable overbending feature for compensating material springback. The bending process is significantly shortened by the automatic “return” movement at the end of the bend. For more complex bending tasks, bending programs can be stored, offering up to 50 bend angles per geometry. An almost unlimited number of programs and up to 200 materials can be saved to the controller or a USB stick. Plug-in bending tools allow for fast changeover to different tube sizes. For challenging geometries, the machine can be converted as standard to either right-hand or left-hand bending directions. The open bending unit also allows for bends such as railing frames with only a single weld seam. Optional PC calculation software determines the cut length for the entire geometry as well as the feed path, twist, and bending angle for every individual bend. The mandrel retraction is programmable and can be automatically triggered once the predefined bending angle is reached. POSSIBLE APPLICATIONS: • Plant construction, e.g. chemical industry • Hydraulic piping • Prototyping • Pipeline construction TECHNICAL DATA: • Bending capacity: Ø 6 to 50 mm • Minimum/maximum bending radius: 10 mm / 140 mm • Bending radii: 2 x D • Multifunction machine control for bending angle adjustment (0.1° accuracy) • Mandrel support lengths: 1500/3000/4500/6000 mm (special versions are available with longer lengths) • Maximum bending result: 180º • Weight: 300-500 kg (depending on configuration) Optional accessories: • Automatic mandrel lubrication (minimal quantity) • Digital measuring system for length and twisting (resolution 0.1) • Remote control of all functions at the carriage (rotational and length stop) Todpsnfvy Usfx Aiqsc • Bending radius up to 250 mm • PC tube calculation software OUR SERVICES: • Welcome to trial production in our in-house demo room • Consulting and informational meeting at your premises • Consultation and processing of leasing/financing purchase through JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Stanje: novo, Once-through steam generator with 23.1 kW/h Tjdpfx Ajzzyvfjiqsc Output: 35 kg/h steam Power supply / Voltage: 400 V Hourly capacity: 35 kg Customs tariff number: 84022000 Freight and packaging: 120.-

Stanje: rabljeno, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22kVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S, 25 mm stroke with Heidenhain measuring system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50/60 Hz Connected load: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Todpepy Uzysfx Aiqoc Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (stand-alone, detachable control device) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault control and process monitoring - Monitoring of current, voltage, power, and energy - Test impulse for part recognition - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated capacity: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force initiation from 1.2 to 550 N - Heidenhain displacement measuring system Welding unit with 5 pneumatic cylinders and Festo valve manifold Type CPX Welding head mounted on horizontal guide rail and can be shifted 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 with 46 mm stroke, 1 with 20 mm stroke). Projection distance of welding tip: 300 mm Welding tip height above floor: 315 mm Welding unit dimensions W x H x D: 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 almost identical units available, price per complete unit

Stanje: novo, Leto izdelave: 2025, Blast cabinet DSK 1102 S with movable carriage and rotary table. Tjdpfjdhl Ngjx Aiqoc Width: 1500 mm, Depth: 1235 mm, Height: 995 mm Pneumatic lifting door. If you have any questions regarding technical specifications, please contact us in writing or by phone. The machines are manufactured at our site in Grossenlueder since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG with the long-standing, well-known points of contact.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Blast container for blasting with glass beads, ceramic, corundum, chilled iron grit, garnet sand, etc. The blast container features a fully covered screw conveyor floor and a genuine abrasive recycling system. No more sweeping, vacuuming, or shoveling of abrasive in the blast chamber while processing your workpieces, thanks to our recirculation system. Abrasive cleaner windsifter with four-way adjustment: airflow volume, flow speed, extraction proximity to the abrasive, and abrasive bed height setting. Electric vibrating screen for continuous coarse separation. Bucket elevator with trapezoidal thread spindle for belt tensioning and speed monitoring. Container lining made of 4mm, 70 Shore fabric-reinforced rubber guarantees a service life of up to 30 years when used correctly. The container can be fully opened from the side for simple forklift loading. The container can be upgraded with crane roof hatch, floor reinforcement, or lateral blast chamber extension. For stainless steel blasting, the container can be equipped with an actual magnetic drawer or drum-type magnetic separator, as well as a stainless steel grating. Filter unit with easy-maintenance access doors, big bag dust collection, secondary filter H13/14, and silencer. Blast pot with pressure regulator and water separator. The container is characterized by its reliability and easy maintenance. All system components are easily accessible at the rear of the container. Only 4 ball bearings on the screw conveyor floor and 4 ball bearings on the bucket elevator. Special warranty of 5 years included on all essential components of the blasting system. Tsdpfouwlzysx Aiqsc Safety features: door/gate limit switches, dead-man control, emergency lighting, blast chamber viewing window, emergency stop inside the blast chamber and on the control cabinet, quick-release pressurized vessel vent.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, vrsta aktuacije: električni, Premer cevi (maks.): 35 mm, Debelina stene cevi (maks.): 2 mm, Kot upogiba (maks.): 360 °, radij upogibanja (maks.): 150 mm, minimalni polmer upogibanja: 32 mm, skupna masa: 28 kg, trajanje garancije: 12 meseci, Oprema: CE označba, nožno daljinsko upravljanje, nujno zaustavitev, THE MOBILE BENDING MACHINE WITH HIGH PERFORMANCE: Tedsnfvx Njpfx Aiqsc The compact, mobile design allows for precise and repeatable bending, both stationary and directly on-site, for pipe diameters up to 35 mm, CU 42 mm. A powerful three-phase motor and precision gearbox ensure strong drive power. The motor speed is automatically adjusted, allowing the return movement to take place at a higher speed and reducing cycle times. A position sensor directly on the bending axis guarantees optimal bending accuracy and very high repeatability. The bending angle can be set to 0.5° easily and quickly using push buttons. The large LCD display shows the angles clearly. Storage of up to three bending angles enables efficient bending of pipes with different bending results. For transport, the compact unit and accessories can be stored cleanly and securely in robust transport cases. The “stationary pipe and rotating tool” design principle ensures minimal space requirements when bending. For thin-walled pipes, sliding shoes are used to allow wrinkle-free bending and to form bends with minimal deformations, e.g., in stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent easily. POSSIBLE APPLICATIONS: • Hydraulic piping • Prototype construction • Sanitary and heating installations • Technical data: • Bending capacity Ø 6 to 35 mm, CU Ø 42 mm depending on material • Bending radius min/max: 36 mm/150 mm • Precise digital bending angle adjustment: 0.5° • Maximum 180º bending result; for special applications, continuous operation possible • 40 mm hexagonal shaft for quick tool changes • Safety footswitch with emergency stop function • 230 V AC connection • Weight: 29 kg • Frequency inverter and three-phase motor • 3 storable bending angles OPTIONAL ACCESSORIES: • Sliding shoe holder • Double roller mount • Profile bender PB20 – for bending flat and square bars up to max. 80 x 8 mm, round bars up to max. 20 mm • Tripod stand • Machine case • Tool case • Small bending device KBV • Special tools upon request OUR SERVICE: • Welcome to test production at our premises in the demo room • Consultation and information session at your site • Consultation and processing for leasing/financing purchase via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance at your location

Leto izdelave: 2024, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, (Please state your offer price) Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== For technical specifications, please refer to the attached handout. Tsdpoz Hax Ujfx Aiqec All warranties are excluded. We assume no liability for the accuracy of technical data and year of manufacture, for the completeness of accessories and tooling, or for compliance with all safety and environmental protection requirements stipulated in accident prevention regulations. No sales to private individuals.

Stanje: novo, Leto izdelave: 2025, THE PRECISE 3-ROLL BENDING MACHINE The development of this compact and mobile horizontal bending machine was clearly focused on the production of dimensionally accurate spirals, such as handrails for spiral staircases. This represents the highest level of complexity, as two interdependent variables (radius and pitch) must come together in a single bend to create a precise geometry. The interaction between pipe calculation on a PC, implementation on the bending machine, and monitoring with measuring devices, including final corrections of bending parameters, ensures accurate bending. With just a few simple entries in the PC pipe calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for machine operation. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power connection. Both hardened steel tools and surface-friendly, hard plastic tools are available. To ensure optimal feed, even for tight bending radii, all three bending rollers are driven. The drive concept proves its worth in daily heavy-duty use, whether working on flat surfaces or bending pipes and profiles. Customers of the 4800, 5000, and 6000 bending systems have the option of purchasing the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this configuration, the machines serve as the drive unit. POSSIBLE APPLICATIONS: • Handrails/underrails for spiral staircases • Large pipe and profile bends • General metal construction TECHNICAL DATA: • Bending capacity: Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Site-ready 230 V connection • Weight: 280 kg Todong A R Sopfx Aiqec OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – to produce controlled pitch • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch based on twist • MPW – PC calculation program for determining the correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm in height • Tools for special profiles OUR SERVICE FOR YOU ONSITE: • Welcome to test production at our facility in the demo room • Consulting and information session at your location • Consultation and processing of leasing/financing purchases • Service contracts, onsite maintenance