Auer Of Utz Zložljiva Škatla 600X400X320 Mm nakup rabljenega (95.793)

Stanje: dober (rabljeno), Included in the scope of delivery: 01x shelf connector, used Material color: blue Manufacturer: Vogelsang Type: NS Suitable for frame profile width: approx. 70 mm Itedpfx Aji Hpkxjgfjl For shelf spacing: approx. 250 mm Dimensions of head plates: 130 x 60 mm Profile dimensions: U 62 x 45 mm Weight: approx. 1.66 kg | piece General information about the item: This item is only available for collection. If transportation or shipping of this item is required, additional costs will apply. These costs may vary depending on the delivery location and/or quantity, and can be quoted upon request.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x U-shaped impact protection, used Material color: yellow Total height: approx. 400 mm Outer profile dimensions: U: approx. 100 x 50 mm Outer profile dimensions: U: approx. 80 x 40 mm Material thickness: approx. 6.00 mm Base plate dimensions: approx. 200 x 100 mm Borehole diameter: approx. 12 mm Number of boreholes: 04 units Your contact persons at our company: Mr. Andre Evering Mr. Mario Klöver Itsdpjn R Edmjfx Agfol Mr. Falk Deutsch General information about the item: This item is offered for collection only. Delivery or dispatch of this item is subject to additional costs, which can be determined individually depending on the delivery location and scope. Please contact us for a specific quote.

Stanje: dober (rabljeno), Technical Data for Pallet Racking Frame: Racking System: Nedcon Type: NS Included in delivery: 01x pallet racking frame, used Color: cream white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustable pitch: 50|50 mm including horizontal and diagonal bracing, base plates The frames are pre-assembled (bolted latticework) Frame height: 9,000 mm Frame depth: 1,100 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Iodpfxev N E H Aj Agfstl General information about the item: This item is offered for collection only. If transport or shipping is required beyond this, additional costs will apply, which can be requested from us depending on the place of delivery and the scope of delivery.

Stanje: dober (rabljeno), Included in delivery: Itodpfx Agsi Dfizsfel 01x Shelf connector, used for shelf spacing: approx. 250 mm total length: approx. 330 mm cross-section: U 30 x 52 mm material colour: blue weight: 0.46 kg | each.

Stanje: dober (rabljeno), Technical data for pallet rack uprights: Racking system: Mecalux Included in delivery: 01x Pallet rack upright, used Material color: blue Frame type: M-81 Frame profile: 80 x 70 x 2.00 mm Including horizontal and diagonal braces, Base plates The uprights are pre-assembled (bolted truss construction) 8,000 mm high 1,100 mm deep Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Itsdpfxommcd Ns Agfsl Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping of this item is required, additional costs will apply, which can be requested from us separately depending on place of delivery and scope of delivery.

Stanje: dober (rabljeno), Technical data for pallet rack beam: Racking system: Dexion Type: P90 Scope of delivery includes: 01x pallet rack beam, used Material color: yellow Beam type: SLB 110/1.5 S320 Box profile: 110 x 50 mm Connector: 5 HK (hooks) Clear span: 1,900 mm Max. load capacity per pair of beams: 2,000 kg with evenly distributed load Iodpfxsiknfgo Agfotl 02x locking pins, used Version: fully galvanized To secure the horizontal beams against unintentional lifting

Stanje: dober (rabljeno), Technical data for pallet rack beam: Racking system: Elektrolux Included in delivery: Ijdpfxjipt Ags Agfotl 01x pallet racking beam, used Material color: silver-grey U-profile: 80 x 45 mm Clear width: 2,700 mm Design: Head beam

Stanje: dober (rabljeno), Included in the scope of delivery: 01x collision guardrail, used Manufacturer: Dexion C-profile length: approx. 1,050 mm Total length: approx. 1,320 mm Total height: approx. 400 mm Total depth: approx. 185 mm The collision guardrails are pre-assembled. Comprising: 01x guardrail, used Material color: yellow Profile: C 385 x 50 x 30 mm Material thickness: approx. 3 mm Length: approx. 1,050 mm 01x protection corner, used Material color: yellow/black or yellow painted Design: right Itjdpolq D Avefx Agfol Total height: approx. 400 mm Total depth: approx. 185 mm Weight: approx. 9.96 kg | pc. 01x protection corner, used Material color: yellow/black or yellow painted Design: left Total height: approx. 400 mm Total depth: approx. 185 mm Weight: approx. 9.96 kg | pc.

Stanje: zelo dobro (rabljeno), Technical data for pallet rack upright: Racking system: Stow Type: Pal Rack NS Scope of delivery includes: 01x pallet rack upright, used Material finish: Sendzimir galvanized Frame profile: 140 x 80 x 2.25 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss design) Height: 9,650 mm Depth: 1,100 mm Iodsk Uuv Sepfx Agfotl General information about the item: This item is offered for collection only. Should transport or shipping of this item be desired, additional costs will apply. These can be requested separately depending on the delivery location and scope of supply.

Stanje: dober (rabljeno), Technical Data for Pallet Rack Beam: Racking System: Jungheinrich Type: MPB Included in delivery: 01x Pallet rack beam, used Material color: yellow Box profile: 80 x 50 mm Beam type: AUF'B'E0488 Connector: 4 HK (hooks) Clear span: 2,750 mm Max. load per pair of beams: 1,200 kg with evenly distributed load Itsdpfeld Iycjx Agfol 02x Safety pins, used Design: fully galvanized For securing the cross beams Prevents unintentional lifting out

Stanje: dober (rabljeno), Technical data for the pallet racking upright: Racking system: Nedcon Type: AS Itjdpfx Agji Elmrjfjl The scope of delivery includes: 01x pallet racking upright, used Material colour: blue Frame profile dimensions: 100 x 68 x 2.0 mm Incl. horizontal and diagonal braces, base plates The uprights are pre-assembled (bolted truss construction) Height: 3,200 mm Depth: 900 mm

Stanje: dober (rabljeno), The scope of delivery includes: 01x Rack connector, used Manufacturer: Dexion Type: P90 for rack spacing: approx. 300 mm Total length: approx. 380 mm Cross-section: U 51 x 25 mm Material finish: Sendzimir galvanized Isdpji Enw Ssfx Agfotl Weight: 0.47 kg | each.

Stanje: dober (rabljeno), We are offering a used shelf connector from the manufacturer Mecalux for sale. Technical data for the shelf connector: Manufacturer: Mecalux Scope of delivery includes: Itsdpfx Aod Ttzhogfel 01x Shelf connector, used Material finish: Sendzimir galvanized Bay distance: approx. 400 mm Profile height: approx. 80 mm Weight per piece: approx. 0.704 kg/piece 04x Hexagon bolts, M8 x 20 8.8 04x Hexagon nuts, M8 04x Washers, M8

Stanje: dober (rabljeno), Included in the scope of delivery: 01x U-profile, used Iedpfov Ia Rmjx Agfjtl Material color: orange Total length: 2,480 mm U-profile: 100 x 50 mm Slotted hole: 40 x 15 mm Material thickness: approx. 6.00 mm Weight | per piece: approx. 26.31 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. If transportation or shipping of this item is required, additional costs will apply, which can be individually requested from us depending on the delivery location or scope of delivery.

Stanje: dober (rabljeno), The scope of delivery includes: 01x Crash protection guardrail, used Total width: approx. 2,610 mm (outer – outer edge of baseplate) Internal width: approx. 2,515 mm for double rack rows up to 2,500 mm Total height: approx. 400 mm Total depth: approx. 220 mm Weight | Guardrail: approx. 39.00 kg Consisting of: 02x L-shaped corner protectors, used Material color: yellow/black Total height: approx. 400 mm Total depth: approx. 305 mm Total width: approx. 265 mm Material thickness: approx. 4.00 mm 02x C-profiles, used Material color: yellow Total length: 2,360 mm C-profile: 180 x 40 x 15 mm Material thickness: approx. 2.50 mm 08x Hexagon bolts, M12x35 08x Hexagon nuts, M12 16x Washers, M12 Isdpfxjxda Ele Agfstl Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on this item: This item is only offered for collection. If transport or shipping of this item is required, this can be arranged at additional cost depending on the place of delivery or the scope of delivery. Please contact us for a quote.

Stanje: dober (rabljeno), Included in the scope of delivery: 01x deep support beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Internal length: approx. 1,103 mm For frame depth: approx. 1,100 mm Clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support: approx. 53 mm Unit weight: approx. 2.52 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Itjdpewwviisfx Agfol General information about the item: This item is offered for collection only. If transportation or shipping of this item is required, additional costs will be incurred, which can be obtained separately from us depending on the place of delivery and the scope of delivery.

Stanje: dober (rabljeno), Hidravlična posoda, hidravlični rezervoar, aluminijasta posoda za hidravlično črpalko, hidravlična enota Itodpfx Agozr Up Uofsl - Dostava: v trenutnem stanju, kot je bila pregledana - Kazalnik nivoja: poškodovan, glejte fotografije - Hidravlična posoda: hidravlični rezervoar za hidravlično enoto - Prostornina rezervoarja: približno 65 litrov / 250x930x280 mm - Posamezne komponente: glejte fotografije - Dimenzije za transport: 930/440/V425 mm - Teža: 16,6 kg

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 3,000 mm, with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm bay spacing Fastening materials (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts available for reorder and extensions can be supplied at any time) - (Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface Itsdpfx Ajmhhx Isgfsl - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes fixing materials (without floor anchors) - With assembly instructions and C4 load labels as per DIN standard - Professional telephone advice - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with pre-delivery notification. Material is packaged for easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowels, and able to accommodate the applied loads. Floor quality, load-bearing capacity, and any required official permits are to be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to the German employers’ liability insurance association, it is recommended that the rack uprights have a minimum 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: bolted system, hot-dip galvanized design Scope of delivery: - 4 upright frames, height 3,500 mm, with foot sections, 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard version - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Mounting hardware (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extension is possible at any time) Isdjmhh Dhspfx Agfjtl - (*Bulk availability: approx. 40 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright: 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Arms height-adjustable in 100 mm increments - Each upright comes with 3 bolt-on cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm: 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Including mounting hardware (without ground anchors) - With assembly instructions and C4 load signs according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively produced in Germany. We offer reliable shipping with advance notification before delivery. Material is sensibly packed to enable easy unloading. If installed outdoors, the load capacities reduce according to wind and snow loads. The foundation must be concrete, level, and suitable for dowelling, and able to bear the imposed loads. The customer is responsible for checking and ensuring the floor properties, load-bearing capacity, and for any permits required by authorities. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to professional association recommendations, the uprights should have at least 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever Rack Used: Bolt System, Hot-Dip Galvanized Version Scope of delivery: - 4 upright frames, height 4,160 mm with base section, 1,200 mm usable depth - 12 cantilever arms, 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm bay length (1,300 mm spacing) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) Ijdpfemhhf Sjx Agfjtl - (*Spare parts reorderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm bay spacing - Rack length = 4,000 mm - Includes mounting material (without floor anchors) - Assembly instructions and C4 load capacity labels according to DIN standard included - Expert telephone advice - Made in Germany - Short delivery times - Collection on site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior delivery notification. Materials are sensibly packaged to ensure easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow loads. The floor must be made of concrete, level, and suitable for dowelling, as well as able to bear the applicable loads. Floor conditions and load-bearing capacity, as well as any required official permits, must be checked and ensured by the customer. The uprights must be anchored to the floor on site. Anchoring to the wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the uprights have at least a 500 mm overhang above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Screw system in hot-dip galvanized design: Pickup price: Robust steel construction made of IPE sections Rack height: 3,500 mm Load capacity per upright: 2,100 kg Iedpfx Aemhhl Hogfstl Base section: 1,200 mm usable depth Cantilever arms height-adjustable in 100 mm increments Each upright equipped with 3 bolted cantilever arms, usable depth 1,200 mm, standard (equals 4 levels) Load capacity per cantilever arm: 700 kg Including longitudinal and diagonal bracing Mounting hardware included (ground anchors not included) Supplied with assembly instructions and C4 load capacity labels according to DIN standards

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever rack used: bolted system, hot-dip galvanized design Scope of delivery: - 4 rack uprights, height 4,160 mm with base section 1,200 mm usable depth - 12 cantilever arms with 1,200 mm usable depth, standard - Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable, extensions possible anytime) - (*Offer also available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm Ijdpsmhh Dtsfx Agfjtl - Including fastening material (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with advance notice prior to delivery. Goods are packed for easy unloading. When installed outdoors, load capacities are reduced by wind and snow loads. The floor must be concrete, level, suitable for anchors, and able to withstand the applied loads. The customer is responsible for checking and ensuring the floor condition, load-bearing capacity, and any required official approvals. The rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to occupational health and safety regulations, it is recommended that racks have at least a 500 mm overhang above the top storage level relative to the top edge of the upright.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Cantilever racking system, powder-coated (RAL 7016 Anthracite): Scope of delivery: - 4 uprights, height 4,200 mm with base part, usable depth 1,200 mm - 12 cantilever arms, usable depth 1,200 mm - Longitudinal and diagonal bracing for 1,300 mm upright spacing (system length 4,000 mm) - Fastening materials (bolts, nuts, and washers) - (*No paint damage!) - (*No damaged components!) - (*Spare parts can be reordered; extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Isdpfx Agomidyfjfstl Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface coated in RAL 5010 (Gentian Blue) - Rack height: 4,200 mm - Load capacity per upright: 2,200 kg - Base section and cantilever arms with usable depth of 1,200 mm - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms as standard (= 4 storage levels) - Load capacity per arm: 730 kg - Includes longitudinal and diagonal braces for 1,300 mm upright spacing - System length: 4,000 mm - Fastening materials included (floor anchors not included) - Supplied with assembly instructions and C4 load plates according to DIN standard - Professional telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight services with advance delivery notice. The material is sensibly packed for easy unloading. Delivery is possible approximately 1–2 weeks after order receipt. Please note: For outdoor installation, the load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, and suitable for anchoring, and must be able to take the imposed loads. Customers are responsible for verifying soil condition, load-bearing capacity, and obtaining any necessary official permits. Uprights must be anchored to the floor by the customer; wall mounting is neither necessary nor recommended. According to trade association guidelines, uprights should project at least 500 mm above the top storage level.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Cantilever racking used: Bolted system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 2,600 mm, with base section 1,000 mm usable depth Iedomhhyaepfx Agfetl - 12 cantilever arms with 1,000 mm usable depth, standard type - Including longitudinal and diagonal braces for 1,300 mm spacing - Fastening material (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorder and extensions possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per upright 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms as standard (=4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable transport with prior notice before delivery. The material is efficiently packed to facilitate easy unloading. When installed outdoors, the load capacities are reduced due to wind and snow load. The foundation must be made of concrete, level, suitable for dowelling, and able to bear the applied loads. The suitability and load-bearing capacity of the floor, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to a wall is neither necessary nor recommended. According to the employers’ liability insurance association, it is recommended that the upright has at least a 500 mm projection above the top storage level.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, Cantilever rack in painted finish (RAL 7016 Anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with 1,200 mm usable depth base section 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright centre distance (4,000 mm rack length) Fastening material (bolts, nuts, and washers) - (*Delivery or pickup in approx. 1 - 2 weeks) - (*No paint damage!) - (*No damaged components!) - (*Spare parts available for reordering and extension anytime) - (*Offer available in larger quantities: Approx. 50 uprights in stock) Net price: €1,990.00 plus VAT Detailed description: - Robust steel construction made from IPE sections (bolt-together system) - Surface painted in RAL 7016 (Anthracite) - Rack height 4,200 mm - Load capacity per upright 2,200 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms adjustable in height in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening materials (excluding floor anchors) - Supplied with assembly instructions and load plaques C4 according to DIN standard - Expert advice by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance delivery notification. The materials are carefully packed for easy unloading. Delivery is possible approx. 1 - 2 weeks after order receipt. For outdoor installation, load capacities are reduced according to wind and snow load. The subfloor must be concrete, flat, suitable for doweling, and able to bear the imposed loads. Floor condition, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; anchoring to the wall is neither necessary nor recommended. Isdpfxomhhype Agfetl According to German trade association recommendations, the rack uprights should have at least a 500 mm projection above the top storage level.